summaryrefslogtreecommitdiff
path: root/t/t1510-repo-setup.sh
AgeCommit message (Collapse)AuthorFilesLines
2014-12-01setup.c: support multi-checkout repo setupLibravatar Nguyễn Thái Ngọc Duy1-0/+1
The repo setup procedure is updated to detect $GIT_DIR/commondir and set $GIT_COMMON_DIR properly. The core.worktree is ignored when $GIT_COMMON_DIR is set. This is because the config file is shared in multi-checkout setup, but checkout directories _are_ different. Making core.worktree effective in all checkouts mean it's back to a single checkout. Helped-by: Johannes Sixt <j6t@kdbg.org> Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-03-19tests: use "env" to run commands with temporary env-var settingsLibravatar David Tran1-3/+1
Ordinarily, we would say "VAR=VAL command" to execute a tested command with environment variable(s) set only for that command. This however does not work if 'command' is a shell function (most notably 'test_must_fail'); the result of the assignment is retained and affects later commands. To avoid this, we used to assign and export environment variables and run such a test in a subshell, like so: ( VAR=VAL && export VAR && test_must_fail git command to be tested ) But with "env" utility, we should be able to say: test_must_fail env VAR=VAL git command to be tested which is much shorter and easier to read. Signed-off-by: David Tran <unsignedzero@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-03-08setup: suppress implicit "." work-tree for bare reposLibravatar Jeff King1-0/+19
If an explicit GIT_DIR is given without a working tree, we implicitly assume that the current working directory should be used as the working tree. E.g.,: GIT_DIR=/some/repo.git git status would compare against the cwd. Unfortunately, we fool this rule for sub-invocations of git by setting GIT_DIR internally ourselves. For example: git init foo cd foo/.git git status ;# fails, as we expect git config alias.st status git status ;# does not fail, but should What happens is that we run setup_git_directory when doing alias lookup (since we need to see the config), set GIT_DIR as a result, and then leave GIT_WORK_TREE blank (because we do not have one). Then when we actually run the status command, we do setup_git_directory again, which sees our explicit GIT_DIR and uses the cwd as an implicit worktree. It's tempting to argue that we should be suppressing that second invocation of setup_git_directory, as it could use the values we already found in memory. However, the problem still exists for sub-processes (e.g., if "git status" were an external command). You can see another example with the "--bare" option, which sets GIT_DIR explicitly. For example: git init foo cd foo/.git git status ;# fails git --bare status ;# does NOT fail We need some way of telling sub-processes "even though GIT_DIR is set, do not use cwd as an implicit working tree". We could do it by putting a special token into GIT_WORK_TREE, but the obvious choice (an empty string) has some portability problems. Instead, we add a new boolean variable, GIT_IMPLICIT_WORK_TREE, which suppresses the use of cwd as a working tree when GIT_DIR is set. We trigger the new variable when we know we are in a bare setting. The variable is left intentionally undocumented, as this is an internal detail (for now, anyway). If somebody comes up with a good alternate use for it, and once we are confident we have shaken any bugs out of it, we can consider promoting it further. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-12-08test: fix '&&' chainingLibravatar Ramkumar Ramachandra1-2/+2
Breaks in a test assertion's && chain can potentially hide failures from earlier commands in the chain by adding " &&" at the end of line to the commands that need them. Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com> Acked-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-03-08trace: give repo_setup trace its own keyLibravatar Jeff King1-1/+1
You no longer get this output with GIT_TRACE=1; instead, you can do GIT_TRACE_SETUP=1. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-01-24t1510: fix typo in the comment of a testLibravatar Jonathan Nieder1-1/+1
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-01-21Subject: setup: officially support --work-tree without --git-dirLibravatar Jonathan Nieder1-95/+115
The original intention of --work-tree was to allow people to work in a subdirectory of their working tree that does not have an embedded .git directory. Because their working tree, which their $cwd was in, did not have an embedded .git, they needed to use $GIT_DIR to specify where it is, and because this meant there was no way to discover where the root level of the working tree was, so we needed to add $GIT_WORK_TREE to tell git where it was. However, this facility has long been (mis)used by people's scripts to start git from a working tree _with_ an embedded .git directory, let git find .git directory, and then pretend as if an unrelated directory were the associated working tree of the .git directory found by the discovery process. It happens to work in simple cases, and is not worth causing "regression" to these scripts. Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-01-19tests: compress the setup testsLibravatar Jonathan Nieder1-4401/+618
New test helpers: - setup_repo, to initialize a repository or gitfile pointing to a repository, with core.bare and core.worktree set as specified; - try_case, to run setup from a given directory and validate the result, with GIT_DIR and GIT_WORK_TREE set as specified; - try_repo, to initialize a repository and call "try_case" from the toplevel and a subdirectory; - run_wt_tests, to run a battery of tests that check for sane behavior when GIT_WORK_TREE is set to various positions relative to the .git dir and cwd. Use these helpers to make the test shorter, less repetitive, and (one hopes) easier to understand and modify. Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-01-19tests: cosmetic improvements to the repo-setup testLibravatar Jonathan Nieder1-44/+50
Give an overview in "sh t1510-repo-setup.sh --help" output. Waste some vertical and horizontal space for clearer code. Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-01-11Fix expected values of setup tests on WindowsLibravatar Johannes Sixt1-1166/+1167
On Windows, bash stores absolute path names in shell variables in POSIX format that begins with a slash, rather than in drive-letter format; such a value is converted to the latter format when it is passed to a non-MSYS program such as git. When an expected test value is constructed, it must contain the value that will be produced by git, which will be in the drive-letter format. But TRASH_DIRECTORY is in POSIX format. Fix this by using $(pwd), which produces drive-letter format since 4114156a (Tests on Windows: $(pwd) must return Windows-style paths). The change in t1510 is a straight seach-and-replace, except for the first hunk of the diff. Signed-off-by: Johannes Sixt <j6t@kdbg.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-01-06t0001,t1510,t3301: use sane_unset which always returns with status 0Libravatar Brandon Casey1-32/+32
On some shells (like /usr/xpg4/bin/sh on Solaris), unset will exit non-zero when passed the name of a variable that has not been set. Use sane_unset instead so that the return value of unset can be ignored while the && linkage of the test script can be preserved. Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-12-22setup: rework setup_explicit_git_dir()Libravatar Nguyễn Thái Ngọc Duy1-143/+143
This function is the most complex one among the three setup_* functions because all GIT_DIR, GIT_WORK_TREE, core.worktree and core.bare are involved. Because core.worktree is only effective inside setup_explicit_git_dir() and the extra code in setup_git_directory() is to handle that. The extra code can now be retired. Also note that setup_explicit assignment is removed, worktree setting is no longer decided by get_git_work_tree(). get_git_work_tree() will be simplified in the next commit. Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-12-22setup: clean up setup_discovered_git_dir()Libravatar Nguyễn Thái Ngọc Duy1-12/+12
If core.bare is true, discard the discovered worktree, move back to original cwd. Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-12-22setup: limit get_git_work_tree()'s to explicit setup case onlyLibravatar Nguyễn Thái Ngọc Duy1-33/+33
get_git_work_tree() takes input as core.worktree, core.bare, GIT_WORK_TREE and decides correct worktree setting. Unfortunately it does not do its job well. core.worktree and GIT_WORK_TREE should only be taken into account, if GIT_DIR is set (which is handled by setup_explicit_git_dir). For other setup cases, only core.bare matters. Add a temporary variable setup_explicit to adjust get_git_work_tree() behavior as such. This variable will be gone once setup_* rework is done. Also remove is_bare_repository_cfg check in set_git_work_tree() to ease the rework. We are going to check for core.bare and core.worktree early before setting worktree. For example, if core.bare is true, no need to set worktree. Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-11-29t1510: setup case #31Libravatar Nguyễn Thái Ngọc Duy1-0/+269
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-11-29t1510: setup case #30Libravatar Nguyễn Thái Ngọc Duy1-0/+39
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-11-29t1510: setup case #29Libravatar Nguyễn Thái Ngọc Duy1-0/+50
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-11-29t1510: setup case #28Libravatar Nguyễn Thái Ngọc Duy1-0/+49
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-11-29t1510: setup case #27Libravatar Nguyễn Thái Ngọc Duy1-0/+268
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-11-29t1510: setup case #26Libravatar Nguyễn Thái Ngọc Duy1-0/+68
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-11-29t1510: setup case #25Libravatar Nguyễn Thái Ngọc Duy1-0/+50
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-11-29t1510: setup case #24Libravatar Nguyễn Thái Ngọc Duy1-0/+48
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-11-29t1510: setup case #23Libravatar Nguyễn Thái Ngọc Duy1-0/+267
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-11-29t1510: setup case #22Libravatar Nguyễn Thái Ngọc Duy1-0/+337
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-11-29t1510: setup case #21Libravatar Nguyễn Thái Ngọc Duy1-0/+130
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-11-29t1510: setup case #20Libravatar Nguyễn Thái Ngọc Duy1-0/+128
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-11-29t1510: setup case #19Libravatar Nguyễn Thái Ngọc Duy1-0/+266
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-11-29t1510: setup case #18Libravatar Nguyễn Thái Ngọc Duy1-0/+71
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-11-29t1510: setup case #17Libravatar Nguyễn Thái Ngọc Duy1-0/+129
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-11-29t1510: setup case #16Libravatar Nguyễn Thái Ngọc Duy1-0/+135
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-11-29t1510: setup case #15Libravatar Nguyễn Thái Ngọc Duy1-0/+268
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-11-29t1510: setup case #14Libravatar Nguyễn Thái Ngọc Duy1-0/+291
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-11-29t1510: setup case #13Libravatar Nguyễn Thái Ngọc Duy1-0/+50
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-11-29t1510: setup case #12Libravatar Nguyễn Thái Ngọc Duy1-0/+49
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-11-29t1510: setup case #11Libravatar Nguyễn Thái Ngọc Duy1-0/+267
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-11-29t1510: setup case #10Libravatar Nguyễn Thái Ngọc Duy1-0/+67
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-11-29t1510: setup case #9Libravatar Nguyễn Thái Ngọc Duy1-0/+49
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-11-29t1510: setup case #8Libravatar Nguyễn Thái Ngọc Duy1-0/+47
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-11-29t1510: setup case #7Libravatar Nguyễn Thái Ngọc Duy1-0/+266
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-11-29t1510: setup case #6Libravatar Nguyễn Thái Ngọc Duy1-0/+291
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-11-29t1510: setup case #5Libravatar Nguyễn Thái Ngọc Duy1-0/+48
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-11-29t1510: setup case #4Libravatar Nguyễn Thái Ngọc Duy1-0/+46
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-11-29t1510: setup case #3Libravatar Nguyễn Thái Ngọc Duy1-0/+267
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-11-29t1510: setup case #2Libravatar Nguyễn Thái Ngọc Duy1-0/+67
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-11-29t1510: setup case #1Libravatar Nguyễn Thái Ngọc Duy1-0/+47
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-11-29t1510: setup case #0Libravatar Nguyễn Thái Ngọc Duy1-2/+51
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-11-29Add t1510 and basic rules that run repo setupLibravatar Nguyễn Thái Ngọc Duy1-0/+59
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>