| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
As a follow-up to d162b25f956 (tests: remove support for
GIT_TEST_GETTEXT_POISON, 2021-01-20) remove most uses of test_i18ncmp
via a simple s/test_i18ncmp/test_cmp/g search-replacement.
I'm leaving t6300-for-each-ref.sh out due to a conflict with in-flight
changes between "master" and "seen", as well as the prerequisite
itself due to other changes between "master" and "next/seen" which add
new test_i18ncmp uses.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Currently, when parse_options() produces a help message it always emits
a blank line after the usage text to separate it from the options text.
If the option spec does not define any switches, or only defines hidden
switches that will not be displayed, then the help text will end up with
two trailing blank lines instead of one. Let's defer emitting the blank
line between the usage text and the options text until it is clear that
the options section will not be empty.
Fixes t1502.5, t1502.6.
Signed-off-by: Brandon Casey <drafnel@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When commit 54e6dc7 added translation support to parse-options, an
fprintf was mistakenly replaced by a call to putchar(). Let's use fputc
instead.
Fixes t0040.11, t0040.12, t0040.33, and t1502.8.
Signed-off-by: Brandon Casey <drafnel@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When the option spec contains no switches or only hidden switches,
parse_options will emit an extra blank line at the end of help output so
that the help text will end in two blank lines instead of one.
When parse_options produces internal help output after an error has
occurred it will emit blank lines within the usage string to stdout
instead of stderr.
Update t/helper/test-parse-options.c to have a description body in the
usage string to exercise this second bug and mark tests as failing in
t0040.
Add tests to t1502 to demonstrate both of these problems.
Signed-off-by: Brandon Casey <drafnel@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Currently, rev-parse only interprets a space ' ' character as the
delimiter between the option spec and the help text. So if a tab
character is placed between the option spec and the help text, it will
be interpreted as part of the long option name or as part of the arg
hint. If it is interpreted as part of the long option name, then
rev-parse will produce what will be interpreted as multiple arguments
on the command line.
For example, the following option spec (note: there is a <tab> between
"frotz" and "enable"):
frotz enable frotzing
will produce the following set expression when --frotz is used:
set -- --frotz --
instead of this:
set -- --frotz enable --
Mark t1502.2 as fixed.
Signed-off-by: Brandon Casey <drafnel@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When searching for flag characters in the option spec, we should ensure
the search stays within the bounds of the option spec and does not enter
the help text portion of the spec. So when we find the boundary white
space marking the start of the help text, let's mark it with a nul
character. Then when we search for flag characters starting from the
beginning of the string we'll stop at the nul and won't enter the help
text.
Now, the following option spec:
exclame this does something!
will produce this 'set' expression when --exclame is specified:
set -- --exclame --
instead of this one:
set -- --exclame this does something --
Mark t1502.4 and t1502.5 as fixed.
Signed-off-by: Brandon Casey <drafnel@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Since commit 2d893df rev-parse will scan forward from the beginning of
the option string looking for a flag character. If there are no flag
characters then the scan will spill over into the help text and will
interpret the characters preceding the "flag" as part of the option-spec
i.e. the long option name.
For example, the following option spec:
exclame this does something!
will produce this 'set' expression when --exclame is specified:
set -- --exclame this does something --
which will be interpreted as four separate parameters by the shell. And
will produce a help string that looks like:
--exclame this does something
this does something!
git-rebase.sh has such an option (--autosquash), and so will add extra
parameters to the 'set' expression when --autosquash is used.
git-rebase continues to work correctly though because when it parses the
arguments, it ignores ones that it does not recognize.
Also, rev-parse --parseopt does not currently interpret a tab character
as a delimiter between the option spec and the help text. If a tab is
used at the end of the option spec, before the help text, and before a
space has been specified, then rev-parse will interpret the tab as part
of the preceding component (either the long name or the arg hint).
For example, the following option spec (note: there is a <tab> between
"frotz" and "enable"):
frotz enable frotzing
will produce this 'set' expression when --frotz is specified:
set -- --frotz enable --
which will be interpreted as 2 separate arguments by the shell.
git-rebase.sh has one of these too (--keep-empty). In this case the tab
is immediately followed by spaces so there are no additional parameters
produced on the command line. The only side-effect is misalignment in
the help text.
Signed-off-by: Brandon Casey <drafnel@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A line in the input to "rev-parse --parseopt" describes an option by
listing a short and/or long name, optional flags [*=?!], argument hint,
and then whitespace and help string.
We did not allow any of the [*=?!] characters in the argument hints.
The following input
pair=key=value equals sign in the hint
used to generate a help line like this:
--pair=key <value> equals sign in the hint
and used to expect "pair=key" as the argument name.
That is not very helpful as we generally do not want any of the [*=?!]
characters in the argument names. But we do want to use at least the
equals sign in the argument hints.
Update the parser to make long argument names stop at the first [*=?!]
character.
Add test case with equals sign in the argument hint and update the test
to perform all the operations in test_expect_success matching the
t/README requirements and allowing commands like
./t1502-rev-parse-parseopt.sh --run=1-2
to stop at the test case 2 without any further modification of the test
state area.
Signed-off-by: Ilya Bobyr <ilya.bobyr@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
It is easy to overlook an already assigned single-letter option name
and try to use it for a new one. Help the developer to catch it
before such a mistake escapes the lab.
This retroactively forbids any short option name (which is defined
to be of type "int") outside the ASCII printable range. We might
want to do one of two things:
- tighten the type of short_name member to 'char', and further
update optbug() to protect it against doing "'%c'" on a funny
value, e.g. negative or above 127.
- drop the check (even the "duplicate" check) for an option whose
short_name is either negative or above 255, to allow clever folks
to take advantage of the fact that such a short_name cannot be
parsed from the command line and the member can be used to store
some extra information.
Helped-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The expected output from the argument help use runs of SPs to align
the description of each option; a careless use of --whitespace=fix
can turn leading parts of them into appropriate number of HTs.
Prevent such a breakage by prefixing all the expected lines with
leading vertical bars in the original and stripping them with a
small sed script.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Built-in commands can specify names for option arguments when usage text
is generated for a command. sh based commands should be able to do the
same.
Option argument name hint is any text that comes after [*=?!] after the
argument name up to the first whitespace.
Signed-off-by: Ilya Bobyr <ilya.bobyr@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add the --stuck-long option to output the options in their long form
if available, and with their arguments stuck.
Contrary to the default form (non stuck arguments and short options),
this can be parsed unambiguously when using options with optional
arguments :
- in the non stuck form, when an option is taking an optional argument
you cannot know if the next argument is its optional argument, or the
next option.
- the long options form allows to differentiate between an empty argument
'--option=' and an unset argument '--option', which is not possible
with short options.
Signed-off-by: Nicolas Vigier <boklm@mars-attacks.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Use the i18n-specific test functions in test scripts for parseopt tests.
This issue was was introduced in v1.7.10.1-488-g54e6d:
54e6d i18n: parseopt: lookup help and argument translations when showing usage
and been broken under GETTEXT_POISON=YesPlease since.
Signed-off-by: Jiang Xin <worldhello.net@gmail.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
rev-parse --parseopt exits with code 129 (usage error) when asked
to dump usage with -h on behalf of another command. Scripts can
take advantage of this to avoid trying to parse usage information
as though it were the regular output from some git command.
Noticed with an &&-chaining tester.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* maint:
backmerge a few more fixes to 1.7.1.X series
rev-parse: fix --parse-opt --keep-dashdash --stop-at-non-option
fix git branch -m in presence of cross devices
Conflicts:
RelNotes
builtin/rev-parse.c
|
|
The ?: operator has a lower priority than |, so the implicit associativity
made the 6th argument of parse_options be PARSE_OPT_KEEP_DASHDASH if
keep_dashdash was true discarding PARSE_OPT_STOP_AT_NON_OPTION and
PARSE_OPT_SHELL_EVAL.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
9c7304e (print the usage string on stdout instead of stderr,
2010-05-17) broke rev-parse --parseopt: when run with -h, the usage
notice on stdout ended up in the shell eval.
Wrap the usage in a cat <<\EOF ... EOF block when printing to stdout.
I do not expect any usage lines to ever start with EOF so this
shouldn't be an undue burden.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When -h is used, print usage messages on stdout. If a command is invoked with
wrong arguments then print the usage messages on stderr.
Signed-off-by: Giuseppe Scrivano <gscrivano@gnu.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* maint:
Extend parse-options test suite
api-parse-options.txt: Introduce documentation for parse options API
parse-options.c: fix documentation syntax of optional arguments
api-builtin.txt: update and fix typo
|
|
When an argument for an option is optional, short options don't need a
space between the option and the argument, and long options need a "=".
Otherwise, arguments are misinterpreted.
Signed-off-by: Michele Ballabio <barra_cuda@katamail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When outputting a usage message with a blank line in the
header, we would output a line with four spaces. Make this
truly a blank line.
This helps us remove trailing whitespace from a test vector.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
As a general principle, we should not use "git diff" to validate the
results of what git command that is being tested has done. We would not
know if we are testing the command in question, or locating a bug in the
cute hack of "git diff --no-index".
Rather use test_cmp for that purpose.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A non-empty line containing no spaces should be treated by --parseopt as
an option group header, but was causing a bus error. Also added a test
script for rev-parse --parseopt.
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
Ævar Arnfjörð Bjarmason
Brandon Casey
Ilya Bobyr
Junio C Hamano
Nicolas Vigier
Jiang Xin
Jonathan Nieder
Uwe Kleine-König
Thomas Rast
Giuseppe Scrivano
Michele Ballabio
Jeff King
Jay Soffian