summaryrefslogtreecommitdiff
path: root/t/t1500-rev-parse.sh
AgeCommit message (Collapse)AuthorFilesLines
2016-05-18t1500: avoid setting environment variables outside of testsLibravatar Eric Sunshine1-9/+15
Ideally, each test should be responsible for setting up state it needs rather than relying upon transient global state. Toward this end, teach test_rev_parse() to accept a "-g <dir>" option to allow callers to specify the value of the GIT_DIR environment variable explicitly. Take advantage of this new option to avoid polluting the global scope with GIT_DIR assignments. Implementation note: Typically, tests avoid polluting the global state by wrapping transient environment variable assignments within a subshell, however, this technique doesn't work here since test_config() and test_unconfig() need to know GIT_DIR, as well, but neither function can be used within a subshell. Consequently, GIT_DIR is instead cleared manually via test_when_finished(). Signed-off-by: Eric Sunshine <sunshine@sunshineco.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-05-18t1500: avoid setting configuration options outside of testsLibravatar Eric Sunshine1-19/+20
Ideally, each test should be responsible for setting up state it needs rather than relying upon transient global state. Toward this end, teach test_rev_parse() to accept a "-b <value>" option to allow callers to set "core.bare" explicitly or undefine it. Take advantage of this new option to avoid setting "core.bare" outside of tests. Under the hood, "-b <value>" invokes "test_config -C <dir>" (or "test_unconfig -C <dir>"), thus git-config knows explicitly where to find its configuration file. Consequently, the global GIT_CONFIG environment variable required by the manual git-config invocations outside of tests is no longer needed, and is thus dropped. Signed-off-by: Eric Sunshine <sunshine@sunshineco.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-05-18t1500: avoid changing working directory outside of testsLibravatar Eric Sunshine1-19/+23
Ideally, each test should be responsible for setting up state it needs rather than relying upon transient global state. Toward this end, teach test_rev_parse() to accept a "-C <dir>" option to allow callers to instruct it explicitly in which directory its tests should be run. Take advantage of this new option to avoid changing the working directory outside of tests. Implementation note: test_rev_parse() passes "-C <dir>" along to git-rev-parse with <dir> properly quoted. The natural and POSIX way to do so is via ${dir:+-C "$dir"}, however, with some older broken shells, this expression evaluates incorrectly to a single argument ("-C <dir>") rather than the expected two (-C and "<dir>"). Work around this problem with the slightly ungainly expression: ${dir:+-C} ${dir:+"$dir"} Signed-off-by: Eric Sunshine <sunshine@sunshineco.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-05-18t1500: test_rev_parse: facilitate future test enhancementsLibravatar Eric Sunshine1-27/+17
Tests run by test_rev_parse() are nearly identical; each invokes git-rev-parse with a single option and compares the result against an expected value. Such duplication makes it onerous to extend the tests since any change needs to be repeated in each test. Avoid the duplication by parameterizing the test and driving it via a for-loop. Signed-off-by: Eric Sunshine <sunshine@sunshineco.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-05-17t1500: be considerate to future potential testsLibravatar Eric Sunshine1-3/+5
The final batch of git-rev-parse tests work against a non-local object database named repo.git. This is done by renaming .git to repo.git and pointing GIT_DIR at it, but the name is never restored to .git at the end of the script, which can be problematic for tests added in the future. Be more friendly by instead making repo.git a copy of .git. Furthermore, make it clear that tests in repo.git will be independent from the results of earlier tests done in .git by initializing repo.git earlier in the test sequence. Likewise, bundle remaining preparation (such as directory creation) into a common setup test consistent with modern practice. Signed-off-by: Eric Sunshine <sunshine@sunshineco.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-02-14t1500: more 'git rev-parse --git-dir' testsLibravatar SZEDER Gábor1-3/+3
Extend t1500 with tests of 'git rev-parse --git-dir' when invoked from other directories of the repository or the work tree. Signed-off-by: SZEDER Gábor <szeder@ira.uka.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-02-14Move 'rev-parse --git-dir' test to t1500Libravatar SZEDER Gábor1-2/+9
Commit 72183cb2 (Fix gitdir detection when in subdir of gitdir, 2009-01-16) added a test to 't1501-worktree' to check the behaviour of 'git rev-parse --git-dir' in a special case. However, t1501 is about testing separate work tree setups, and not about basic 'rev-parse' functionality, which is tested in t1500-rev-parse. Therefore, this patch moves that test to t1500. Signed-off-by: SZEDER Gábor <szeder@ira.uka.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-05-05Don't use the 'export NAME=value' in the test scripts.Libravatar Bryan Donlan1-4/+5
This form is not portable across all shells, so replace instances of: export FOO=bar with: FOO=bar export FOO Signed-off-by: Bryan Donlan <bdonlan@fushizen.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-02-06fix config reading in testsLibravatar Jeff King1-2/+2
Previously, we set the GIT_CONFIG environment variable in our tests so that only that file was read. However, setting it to a static value is not correct, since we are not necessarily always in the same directory; instead, we want the usual git config file lookup to happen. To do this, we stop setting GIT_CONFIG, which means that we must now suppress the reading of the system-wide and user configs. This exposes an incorrect test in t1500, which is also fixed (the incorrect test worked because we were failing to read the core.bare value from the config file, since the GIT_CONFIG variable was pointing us to the wrong file). Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-08-10Reinstate the old behaviour when GIT_DIR is set and GIT_WORK_TREE is unsetLibravatar Johannes Schindelin1-2/+4
The old behaviour was to unilaterally default to the cwd is the work tree when GIT_DIR was set, but GIT_WORK_TREE wasn't, no matter if we are inside the GIT_DIR, or if GIT_DIR is actually something like ../../../.git. Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-08-01Clean up work-tree handlingLibravatar Johannes Schindelin1-10/+10
The old version of work-tree support was an unholy mess, barely readable, and not to the point. For example, why do you have to provide a worktree, when it is not used? As in "git status". Now it works. Another riddle was: if you can have work trees inside the git dir, why are some programs complaining that they need a work tree? IOW it is allowed to call $ git --git-dir=../ --work-tree=. bla when you really want to. In this case, you are both in the git directory and in the working tree. So, programs have to actually test for the right thing, namely if they are inside a working tree, and not if they are inside a git directory. Also, GIT_DIR=../.git should behave the same as if no GIT_DIR was specified, unless there is a repository in the current working directory. It does now. The logic to determine if a repository is bare, or has a work tree (tertium non datur), is this: --work-tree=bla overrides GIT_WORK_TREE, which overrides core.bare = true, which overrides core.worktree, which overrides GIT_DIR/.. when GIT_DIR ends in /.git, which overrides the directory in which .git/ was found. In related news, a long standing bug was fixed: when in .git/bla/x.git/, which is a bare repository, git formerly assumed ../.. to be the appropriate git dir. This problem was reported by Shawn Pearce to have caused much pain, where a colleague mistakenly ran "git init" in "/" a long time ago, and bare repositories just would not work. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-06-06extend rev-parse test for --is-inside-work-treeLibravatar Matthias Lederhofer1-12/+17
Signed-off-by: Matthias Lederhofer <matled@gmx.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-06-06test git rev-parseLibravatar Matthias Lederhofer1-0/+72
Signed-off-by: Matthias Lederhofer <matled@gmx.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>