| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
When we check commit objects, we complain if commit->date is
ULONG_MAX, which is an indication that we saw integer
overflow when parsing it. However, we do not do any check at
all for author lines, which also contain a timestamp.
Let's actually check the timestamps on each ident line
with strtoul. This catches both author and committer lines,
and we can get rid of the now-redundant commit->date check.
Note that like the existing check, we compare only against
ULONG_MAX. Now that we are calling strtoul at the site of
the check, we could be slightly more careful and also check
that errno is set to ERANGE. However, this will make further
refactoring in future patches a little harder, and it
doesn't really matter in practice.
For 32-bit systems, one would have to create a commit at the
exact wrong second in 2038. But by the time we get close to
that, all systems will hopefully have moved to 64-bit (and
if they haven't, they have a real problem one second later).
For 64-bit systems, by the time we get close to ULONG_MAX,
all systems will hopefully have been consumed in the fiery
wrath of our expanding Sun.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Having a ".git" entry inside a tree can cause confusing
results on checkout. At the top-level, you could not
checkout such a tree, as it would complain about overwriting
the real ".git" directory. In a subdirectory, you might
check it out, but performing operations in the subdirectory
would confusingly consider the in-tree ".git" directory as
the repository.
The regular git tools already make it hard to accidentally
add such an entry to a tree, and do not allow such entries
to enter the index at all. Teaching fsck about it provides
an additional safety check, and let's us avoid propagating
any such bogosity when transfer.fsckObjects is on.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A tree with meta-paths like '.' or '..' does not work well
with git; the index will refuse to load it or check it out
to the filesystem (and even if we did not have that safety,
it would look like we were overwriting an untracked
directory). For the same reason, it is difficult to create
such a tree with regular git.
Let's warn about these dubious entries during fsck, just in
case somebody has created a bogus tree (and this also lets
us prevent them from propagating when transfer.fsckObjects
is set).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* jc/maint-t1450-fsck-order-fix:
t1450: the order the objects are checked is undefined
|
|
When a tag T points at an object X that is of a type that is
different from what the tag records as, fsck should report it as an
error.
However, depending on the order X and T are checked individually,
the actual error message can be different. If X is checked first,
fsck remembers X's type and then when it checks T, it notices that T
records X as a wrong type (i.e. the complaint is about a broken tag
T). If T is checked first, on the other hand, fsck remembers that we
need to verify X is of the type tag records, and when it later
checks X, it notices that X is of a wrong type (i.e. the complaint
is about a broken object X).
The important thing is that fsck notices such an error and diagnoses
the issue on object X, but the test was expecting that we happen to
check objects in the order to make us detect issues with tag T, not
with object X. Remove this unwarranted assumption.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git diff" had a confusion between taking data from a path in the
working tree and taking data from an object that happens to have
name 0{40} recorded in a tree.
* jk/maint-null-in-trees:
fsck: detect null sha1 in tree entries
do not write null sha1s to on-disk index
diff: do not use null sha1 as a sentinel value
|
|
Short of somebody happening to beat the 1 in 2^160 odds of
actually generating content that hashes to the null sha1, we
should never see this value in a tree entry. So let's have
fsck warn if it it seen.
As in the previous commit, we test both blob and submodule
entries to future-proof the test suite against the
implementation depending on connectivity to notice the
error.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The default output from "fsck" is often overwhelmed by informational
message on dangling objects, especially if you do not repack often, and a
real error can easily be buried.
Add "--no-dangling" option to omit them, and update the user manual to
demonstrate its use.
Based on a patch by Clemens Buchacher, but reverted the part to change
the default to --no-dangling, which is unsuitable for the first patch.
The usual three-step procedure to break the backward compatibility over
time needs to happen on top of this, if we were to go in that direction.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
git rev-list passes rev_list_info, not rev_list objects. Without this
fix, rev-list enables or disables the --verify-objects option depending
on a read from an undefined memory location.
Signed-off-by: Clemens Buchacher <drizzd@aon.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
fsck allows a name with > character in it like "name> <email>". Also for
"name email>" fsck says "missing space before email".
More precisely, it seeks for a first '<', checks that ' ' preceeds it.
Then seeks to '<' or '>' and checks that it is the '>'. Missing space is
reported if either '<' is not found or it's not preceeded with ' '.
Change it to following. Seek to '<' or '>', check that it is '<' and is
preceeded with ' '. Seek to '<' or '>' and check that it is '>'. So now
"name> <email>" is rejected as "bad name". More strict name check is the
only change in what is accepted.
Report 'missing space' only if '<' is found and is not preceeded with a
space.
Signed-off-by: Dmitry Ivankov <divanorama@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
fsck reports "missing space before <email>" for committer string equal
to "name email>" or to "". It'd be nicer to say "missing email" for
the second string and "name is bad" (has > in it) for the first one.
Add a failing test for these messages.
For "name> <email>" no error is reported. Looks like a bug, so add
such a failing test."
Signed-off-by: Dmitry Ivankov <divanorama@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Breaks in a test assertion's && chain can potentially hide
failures from earlier commands in the chain.
Commands intended to fail should be marked with !, test_must_fail, or
test_might_fail. The examples in this patch do not require that.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The fsck test is generally careful to remove the corrupt objects
it inserts, but dangling objects are left behind due to some typos
and omissions. It is better to clean up more completely, to
simplify the addition of later tests. So:
- guard setup and cleanup with test_expect_success to catch
typos and errors;
- check both stdout and stderr when checking for empty fsck
output;
- use test_cmp empty file in place of test $(wc -l <file) = 0,
for better debugging output when running tests with -v;
- add a remove_object () helper and use it to replace broken
object removal code that forgot about the fanout in
.git/objects;
- disable gc.auto, to avoid tripping up object removal if the
number of objects ever reaches that threshold.
- use test_when_finished to ensure cleanup tasks are run and
succeed when tests fail;
- add a new final test that no breakage or dangling objects
was left behind.
While at it, add a brief description to test_description of the
history that is expected to persist between tests.
Part of a campaign to clean up subshell usage in tests.
Cc: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
daae1922 (fsck: check ident lines in commit objects, 2010-04-24)
taught fsck to expect commit objects to have the form
tree <object name>
<parents>
author <valid ident string>
committer <valid ident string>
log message
The check is overly strict: for example, it errors out with the
message “expected blank line” for perfectly valid commits with an
"encoding ISO-8859-1" line.
Later it might make sense to teach fsck about the rest of the header
and warn about unrecognized header lines, but for simplicity, let’s
accept arbitrary trailing lines for now.
Reported-by: Tuncer Ayaz <tuncer.ayaz@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Check that email addresses do not contain <, >, or newline so they can
be quickly scanned without trouble. The copy() function in ident.c
already ensures that ordinary git commands will not write email
addresses without this property.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Almost exactly a year ago in 02a6552 (Test fsck a bit harder), I
introduced two testcases that were expecting failure.
However, the only bug was that the testcases wrote *blobs* because I
forgot to pass -t tag to hash-object. Fix this, and then adjust the
rest of the test to properly check the result.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
git-fsck, of all tools, has very few tests. This adds some more:
* a corrupted object;
* a branch pointing to a non-commit;
* a tag pointing to a nonexistent object;
* and a tag pointing to an object of a type other than what the tag
itself claims.
Only the first two are caught. At least the third probably should,
too, but currently slips through.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git fsck" used to validate only loose objects that are local and nothing
else by default. This is not just too little when a repository is
borrowing objects from other object stores, but also caused the
connectivity check to mistakenly declare loose objects borrowed from them
to be missing.
The rationale behind the default mode that validates only loose objects is
because these objects are still young and more unlikely to have been
pushed to other repositories yet. That holds for loose objects borrowed
from alternate object stores as well.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
By default we looked at all refs but not HEAD. The only thing that made
fsck not lose sight of commits that are only reachable from a detached
HEAD was the reflog for the HEAD.
This fixes it, with a new test.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
Jeff King
Junio C Hamano
Clemens Buchacher
Dmitry Ivankov
Jonathan Nieder
Thomas Rast