summaryrefslogtreecommitdiff
path: root/t/t1403-show-ref.sh
AgeCommit message (Collapse)AuthorFilesLines
2020-11-19t[01]*: adjust the references to the default branch name "main"Libravatar Johannes Schindelin1-10/+10
Carefully excluding t1309, which sees independent development elsewhere at the time of writing, we transition above-mentioned tests to the default branch name `main`. This trick was performed via $ (cd t && sed -i -e 's/master/main/g' -e 's/MASTER/MAIN/g' \ -e 's/Master/Main/g' -e 's/naster/nain/g' -- t[01]*.sh && git checkout HEAD -- t1309\*) Note that t5533 contains a variation of the name `master` (`naster`) that we rename here, too. This allows us to define `GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=main` for those tests. Helped-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-11-19tests: mark tests relying on the current default for `init.defaultBranch`Libravatar Johannes Schindelin1-0/+3
In addition to the manual adjustment to let the `linux-gcc` CI job run the test suite with `master` and then with `main`, this patch makes sure that GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME is set in all test scripts that currently rely on the initial branch name being `master by default. To determine which test scripts to mark up, the first step was to force-set the default branch name to `master` in - all test scripts that contain the keyword `master`, - t4211, which expects `t/t4211/history.export` with a hard-coded ref to initialize the default branch, - t5560 because it sources `t/t556x_common` which uses `master`, - t8002 and t8012 because both source `t/annotate-tests.sh` which also uses `master`) This trick was performed by this command: $ sed -i '/^ *\. \.\/\(test-lib\|lib-\(bash\|cvs\|git-svn\)\|gitweb-lib\)\.sh$/i\ GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=master\ export GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME\ ' $(git grep -l master t/t[0-9]*.sh) \ t/t4211*.sh t/t5560*.sh t/t8002*.sh t/t8012*.sh After that, careful, manual inspection revealed that some of the test scripts containing the needle `master` do not actually rely on a specific default branch name: either they mention `master` only in a comment, or they initialize that branch specificially, or they do not actually refer to the current default branch. Therefore, the aforementioned modification was undone in those test scripts thusly: $ git checkout HEAD -- \ t/t0027-auto-crlf.sh t/t0060-path-utils.sh \ t/t1011-read-tree-sparse-checkout.sh \ t/t1305-config-include.sh t/t1309-early-config.sh \ t/t1402-check-ref-format.sh t/t1450-fsck.sh \ t/t2024-checkout-dwim.sh \ t/t2106-update-index-assume-unchanged.sh \ t/t3040-subprojects-basic.sh t/t3301-notes.sh \ t/t3308-notes-merge.sh t/t3423-rebase-reword.sh \ t/t3436-rebase-more-options.sh \ t/t4015-diff-whitespace.sh t/t4257-am-interactive.sh \ t/t5323-pack-redundant.sh t/t5401-update-hooks.sh \ t/t5511-refspec.sh t/t5526-fetch-submodules.sh \ t/t5529-push-errors.sh t/t5530-upload-pack-error.sh \ t/t5548-push-porcelain.sh \ t/t5552-skipping-fetch-negotiator.sh \ t/t5572-pull-submodule.sh t/t5608-clone-2gb.sh \ t/t5614-clone-submodules-shallow.sh \ t/t7508-status.sh t/t7606-merge-custom.sh \ t/t9302-fast-import-unpack-limit.sh We excluded one set of test scripts in these commands, though: the range of `git p4` tests. The reason? `git p4` stores the (foreign) remote branch in the branch called `p4/master`, which is obviously not the default branch. Manual analysis revealed that only five of these tests actually require a specific default branch name to pass; They were modified thusly: $ sed -i '/^ *\. \.\/lib-git-p4\.sh$/i\ GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=master\ export GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME\ ' t/t980[0167]*.sh t/t9811*.sh Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-07-30tests: make use of the test_must_be_empty functionLibravatar Ævar Arnfjörð Bjarmason1-29/+17
Change various tests that use an idiom of the form: >expect && test_cmp expect actual To instead use: test_must_be_empty actual The test_must_be_empty() wrapper was introduced in ca8d148daf ("test: test_must_be_empty helper", 2013-06-09). Many of these tests have been added after that time. This was mostly found with, and manually pruned from: git grep '^\s+>.*expect.* &&$' t Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-01-23show-ref: detect dangling refs under --verify as wellLibravatar Vladimir Panteleev1-0/+22
Move detection of dangling refs into show_one(), so that they are detected when --verify is present as well as when it is absent. Signed-off-by: Vladimir Panteleev <git@thecybershadow.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-01-23show-ref: allow -d to work with --verifyLibravatar Vladimir Panteleev1-0/+9
Move handling of -d into show_one(), so that it takes effect when --verify is present as well as when it is absent. This is useful when the user wishes to avoid the costly iteration of refs. Signed-off-by: Vladimir Panteleev <git@thecybershadow.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-01-23show-ref: accept HEAD with --verifyLibravatar Vladimir Panteleev1-0/+11
Previously, when --verify was specified, show-ref would use a separate code path which did not handle HEAD and treated it as an invalid ref. Thus, "git show-ref --verify HEAD" (where "--verify" is used because the user is not interested in seeing refs/remotes/origin/HEAD) did not work as expected. Instead of insisting that the input begins with "refs/", allow "HEAD" as well in the codepath that handles "--verify", so that all valid full refnames including HEAD are passed to the same output machinery. Signed-off-by: Vladimir Panteleev <git@thecybershadow.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-03-20t: fix severe &&-chain breakageLibravatar Jeff King1-5/+5
These are tests which are missing a link in their &&-chain, in a location which causes a significant portion of the test to be missed (e.g., the test effectively does nothing, or consists of a long string of actions and output comparisons, and we throw away the exit code of at least one part of the string). Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-07-17show-ref: make --head always show the HEAD refLibravatar Doug Bell1-0/+167
The docs seem to say that doing git show-ref --head --tags would show both the HEAD ref and all the tag refs. However, doing both --head and either of --tags or --heads would filter out the HEAD ref. Also update the documentation to describe the new behavior and add tests for the show-ref command. [jc: Doug did proofread the tests, but it was done by me and bugs in it are mine]. Signed-off-by: Doug Bell <madcityzen@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>