| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
"git -c credential.<var>=<value> submodule" can now be used to
propagate configuration variables related to credential helper
down to the submodules.
* jk/submodule-c-credential:
git_config_push_parameter: handle empty GIT_CONFIG_PARAMETERS
git: submodule honor -c credential.* from command line
quote: implement sq_quotef()
submodule: fix segmentation fault in submodule--helper clone
submodule: fix submodule--helper clone usage
submodule: check argc count for git submodule--helper clone
submodule: don't pass empty string arguments to submodule--helper clone
|
|
"git config --get-urlmatch", unlike other variants of the "git
config --get" family, did not signal error with its exit status
when there was no matching configuration.
* jk/config-get-urlmatch:
Documentation/git-config: fix --get-all description
Documentation/git-config: use bulleted list for exit codes
config: fail if --get-urlmatch finds no value
|
|
The "git -c var=value" option stuffs the config value into
$GIT_CONFIG_PARAMETERS, so that sub-processes can see it.
When the config is later read via git_config() or similar,
we parse it back out of that variable. The parsing end is a
little bit picky; it assumes that each entry was generated
with sq_quote_buf(), and that there is no extraneous
whitespace.
On the generating end, we are careful to append to an
existing $GIT_CONFIG_PARAMETERS variable if it exists.
However, our test for "should we add a space separator" is
too liberal: it will add one even if the environment
variable exists but is empty. As a result, you might end up
with:
GIT_CONFIG_PARAMETERS=" 'core.foo=bar'"
which the parser will choke on.
This was hard to trigger in older versions of git, since we
only set the variable when we had something to put into it
(though you could certainly trigger it manually). But since
14111fc (git: submodule honor -c credential.* from command
line, 2016-02-29), the submodule code will unconditionally
put the $GIT_CONFIG_PARAMETERS variable into the environment
of any operation in the submodule, whether it is empty or
not. So any of those operations which themselves use "git
-c" will generate the unparseable value and fail.
We can easily fix it by catching this case on the generating
side. While we're adding a test, let's also check that
multiple layers of "git -c" work, which was previously not
tested at all.
Reported-by: Shin Fan <shinfan@google.com>
Signed-off-by: Jeff King <peff@peff.net>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Tested-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
On Windows, we have that funny situation where the test script can refer
to POSIX paths because it runs in a shell that uses a POSIX emulation
layer ("MSYS2 runtime"). Yet, git.exe does *not* understand POSIX paths
at all but only pure Windows paths.
So let's just convert the POSIX paths to Windows paths before passing
them on to Git, using `pwd` (which is already modified on Windows to
output Windows paths).
While fixing the new tests on Windows, we also have to exclude the tests
that want to write a file with a name that is illegal on Windows
(unfortunately, there is more than one test trying to make use of that
file).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
One way to diagnose broken regression tests is to run the test
script using 'sh -x t... -i -v' to find out which call actually
demonstrates the symptom.
Hence it is pretty counterproductive if the test script behaves
differently when being run via 'sh -x', in particular when using
test_cmp or test_i18ncmp on redirected stderr. A more recent way
"sh tXXXX -i -v -x" has the same issue.
So let's use test_i18ngrep (as suggested by Jonathan Nieder) instead of
test_cmp/test_i18ncmp to verify that stderr looks as expected.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The --get, --get-all and --get-regexp options to git-config exit with
status 1 if the key is not found but --get-urlmatch succeeds in this
case.
Change --get-urlmatch to behave in the same way as the other --get*
options so that all four are consistent. --get-color is a special case
because it accepts a default value to return and so should not return an
error if the key is not found.
Also clarify this behaviour in the documentation.
Signed-off-by: John Keeping <john@keeping.me.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If config values are queried using 'git config' (e.g. via --get,
--get-all, --get-regexp, or --list flag) then it is sometimes hard to
find the configuration file where the values were defined.
Teach 'git config' the '--show-origin' option to print the source
configuration file for every printed value.
Based-on-patch-by: Jeff King <peff@peff.net>
Signed-off-by: Lars Schneider <larsxschneider@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Use the config origin_type to print more detailed error messages that
inform the user about the origin of a config error (file, stdin, blob).
Helped-by: Ramsay Jones <ramsay@ramsayjones.plus.com>
Signed-off-by: Lars Schneider <larsxschneider@gmail.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Git should not be on the left-hand side of a pipe, because it hides the exit
code, and we want to make sure git does not fail.
Fix all invocations of 'nul_to_q' (defined in /t/test-lib-functions.sh) using
this pattern. There is one more occurrence of the pattern in t9010-svn-fe.sh
which is too evolved to change it easily.
All remaining test code that does not adhere to the pattern can be found with
the following command:
git grep -E 'git.*[^|]\|($|[^|])'
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Lars Schneider <larsxschneider@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
'git config' can only show values or name-value pairs, so if a shell
script needs the names of set config variables it has to run 'git config
--list' or '--get-regexp' and parse the output to separate config
variable names from their values. However, such a parsing can't cope
with multi-line values. Though 'git config' can produce null-terminated
output for newline-safe parsing, that's of no use in such a case, becase
shells can't cope with null characters.
Even our own bash completion script suffers from these issues.
Help the completion script, and shell scripts in general, by introducing
the '--name-only' option to modify the output of '--list' and
'--get-regexp' to list only the names of config variables, so they don't
have to perform error-prone post processing to separate variable names
from their values anymore.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
These are tests which are missing a link in their &&-chain,
but in a way that probably does not effect the outcome of
the test. Most of these are of the form:
some_cmd >actual
test_cmp expect actual
The main point of the test is to verify the output, and a
failure in some_cmd would probably be noticed by bogus
output. But it is good for the tests to also confirm that
"some_cmd" does not die unexpectedly after producing its
output.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
These are tests which are missing a link in their &&-chain,
in a location which causes a significant portion of the test
to be missed (e.g., the test effectively does nothing, or
consists of a long string of actions and output comparisons,
and we throw away the exit code of at least one part of the
string).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git -c section.var command" and "git -c section.var= command"
should pass the configuration differently (the former should be
a boolean true, the latter should be an empty string).
* jk/command-line-config-empty-string:
config: teach "git -c" to recognize an empty string
|
|
In a config file, you can do:
[foo]
bar
to turn the "foo.bar" boolean flag on, and you can do:
[foo]
bar=
to set "foo.bar" to the empty string. However, git's "-c"
parameter treats both:
git -c foo.bar
and
git -c foo.bar=
as the boolean flag, and there is no way to set a variable
to the empty string. This patch enables the latter form to
do that.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Support for Back when bdccd3c1 (test-lib: allow negation of
prerequisites, 2012-11-14) introduced negated predicates
(e.g. "!MINGW,!CYGWIN"), we already had 5 test files that use
NOT_MINGW (and a few MINGW) as prerequisites.
Let's not add NOT_FOO and rewrite existing ones as !FOO for both
MINGW and CYGWIN.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* ew/config-protect-mode:
config: preserve config file permissions on edits
|
|
Users may already store sensitive data such as imap.pass in
.git/config; making the file world-readable when "git config"
is called to edit means their password would be compromised
on a shared system.
[v2: updated for section renames, as noted by Junio]
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* jk/tests-cleanup:
t0001: drop subshells just for "cd"
t0001: drop useless subshells
t0001: use test_must_fail
t0001: use test_config_global
t0001: use test_path_is_*
t0001: make symlink reinit test more careful
t: prefer "git config --file" to GIT_CONFIG
t: prefer "git config --file" to GIT_CONFIG with test_must_fail
t: stop using GIT_CONFIG to cross repo boundaries
t: drop useless sane_unset GIT_* calls
t/test-lib: drop redundant unset of GIT_CONFIG
t/Makefile: stop setting GIT_CONFIG
|
|
* dt/tests-with-env-not-subshell:
tests: use "env" to run commands with temporary env-var settings
|
|
Doing:
GIT_CONFIG=foo git config ...
is equivalent to:
git config --file=foo ...
The latter is easier to read and slightly less error-prone,
because of issues with one-shot variables and shell
functions (e.g., you cannot use the former with
test_must_fail).
Note that we explicitly leave one case in t1300 which checks
the same operation on both GIT_CONFIG and "git config
--file". They are equivalent in the code these days, but
this will make sure it remains so.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This lets us get rid of an extra "env" invocation in the
middle, and is slightly more readable.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Ordinarily, we would say "VAR=VAL command" to execute a tested
command with environment variable(s) set only for that command.
This however does not work if 'command' is a shell function (most
notably 'test_must_fail'); the result of the assignment is retained
and affects later commands.
To avoid this, we used to assign and export environment variables
and run such a test in a subshell, like so:
(
VAR=VAL && export VAR &&
test_must_fail git command to be tested
)
But with "env" utility, we should be able to say:
test_must_fail env VAR=VAL git command to be tested
which is much shorter and easier to read.
Signed-off-by: David Tran <unsignedzero@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The patch extends git config --file interface to allow read config from
stdin.
Editing stdin or setting value in stdin is an error.
Include by absolute path is allowed in stdin config, but not by relative
path.
Signed-off-by: Kirill A. Shutemov <kirill@shutemov.name>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git config" did not provide a way to set or access numbers larger
than a native "int" on the platform; it now provides 64-bit signed
integers on all platforms.
* jk/config-int-range-check:
git-config: always treat --int as 64-bit internally
config: make numeric parsing errors more clear
config: set errno in numeric git_parse_* functions
config: properly range-check integer values
config: factor out integer parsing from range checks
|
|
When you run "git config --int", the maximum size of integer
you get depends on how git was compiled, and what it
considers to be an "int".
This is almost useful, because your scripts calling "git
config" will behave similarly to git internally. But relying
on this is dubious; you have to actually know how git treats
each value internally (e.g., int versus unsigned long),
which is not documented and is subject to change. And even
if you know it is "unsigned long", we do not have a
git-config option to match that behavior.
Furthermore, you may simply be asking git to store a value
on your behalf (e.g., configuration for a hook). In that
case, the relevant range check has nothing at all to do with
git, but rather with whatever scripting tools you are using
(and git has no way of knowing what the appropriate range is
there).
Not only is the range check useless, but it is actively
harmful, as there is no way at all for scripts to look
at config variables with large values. For instance, one
cannot reliably get the value of pack.packSizeLimit via
git-config. On an LP64 system, git happily uses a 64-bit
"unsigned long" internally to represent the value, but the
script cannot read any value over 2G.
Ideally, the "--int" option would simply represent an
arbitrarily large integer. For practical purposes, however,
a 64-bit integer is large enough, and is much easier to
implement (and if somebody overflows it, we will still
notice the problem, and not simply return garbage).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If we try to parse an integer config argument and get a
number outside of the representable range, we die with the
cryptic message: "bad config value for '%s'".
We can improve two things:
1. Show the value that produced the error (e.g., bad
config value '3g' for 'foo.bar').
2. Mention the reason the value was rejected (e.g.,
"invalid unit" versus "out of range").
A few tests need to be updated with the new output, but that
should not be representative of real-world breakage, as
scripts should not be depending on the exact text of our
stderr output, which is subject to i18n anyway.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Using the same urlmatch_config_entry() infrastructure, add a new
mode "--get-urlmatch" to the "git config" command, to learn values
for the "virtual" two-level variables customized for the specific
URL.
git config [--<type>] --get-urlmatch <section>[.<key>] <url>
With <section>.<key> fully specified, the configuration data for
<section>.<urlpattern>.<key> for <urlpattern> that best matches the
given <url> is sought (and if not found, <section>.<key> is used)
and reported. For example, with this configuration:
[http]
sslVerify
[http "https://weak.example.com"]
cookieFile = /tmp/cookie.txt
sslVerify = false
You would get
$ git config --bool --get-urlmatch http.sslVerify https://good.example.com
true
$ git config --bool --get-urlmatch http.sslVerify https://weak.example.com
false
With only <section> specified, you can get a list of all variables
in the section with their values that apply to the given URL. E.g
$ git config --get-urlmatch http https://weak.example.com
http.cookiefile /tmp/cookie.txt
http.sslverify false
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The config-editing code used by "git config var value" is
built around the regular config callback parser, whose only
triggerable item is an actual key. As a result, it does not
know anything about section headers, which can result in
unnecessarily ugly output:
1. When we delete the last key in a section, we should be
able to delete the section header.
2. When we add a key into a section, we should be able to
reuse the same section header, even if that section did
not have any keys in it already.
Unfortunately, fixing these is not trivial with the current
code. It would involve the config parser recording and
passing back information on each item it finds, including
headers, keys, and even comments (or even better, generating
an actual in-memory parse-tree).
Since these behaviors do not cause any functional problems
(i.e., the resulting config parses as expected, it is just
uglier than one would like), fixing them can wait until
somebody feels like substantially refactoring the parsing
code. In the meantime, let's document them as known issues
with some tests.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Drop duplicate detection from "git-config --get"; this lets it
better match the internal config callbacks, which clears up some
corner cases with includes.
* jk/config-ignore-duplicates:
builtin/config.c: Fix a sparse warning
git-config: use git_config_with_options
git-config: do not complain about duplicate entries
git-config: collect values instead of immediately printing
git-config: fix regexp memory leaks on error conditions
git-config: remove memory leak of key regexp
t1300: test "git config --get-all" more thoroughly
t1300: remove redundant test
t1300: style updates
|
|
"git config --path $key" segfaulted on "[section] key" (a boolean
"true" spelled without "=", not "[section] key = true").
* cn/config-missing-path:
config: don't segfault when given --path with a missing value
|
|
When given a variable without a value, such as '[section] var' and
asking git-config to treat it as a path, git_config_pathname returns
an error and doesn't modify its output parameter. show_config assumes
that the call is always successful and sets a variable to indicate
that vptr should be freed. In case of an error however, trying to do
this will cause the program to be killed, as it's pointing to memory
in the stack.
Detect the error and return immediately to avoid freeing or accessing
the uninitialed memory in the stack.
Signed-off-by: Carlos Martín Nieto <cmn@elego.de>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If git-config is asked for a single value, it will complain
and exit with an error if it finds multiple instances of
that value. This is unlike the usual internal config
parsing, however, which will generally overwrite previous
values, leaving only the final one. For example:
[set a multivar]
$ git config user.email one@example.com
$ git config --add user.email two@example.com
[use the internal parser to fetch it]
$ git var GIT_AUTHOR_IDENT
Your Name <two@example.com> ...
[use git-config to fetch it]
$ git config user.email
one@example.com
error: More than one value for the key user.email: two@example.com
This overwriting behavior is critical for the regular
parser, which starts with the lowest-priority file (e.g.,
/etc/gitconfig) and proceeds to the highest-priority file
($GIT_DIR/config). Overwriting yields the highest priority
value at the end.
Git-config solves this problem by implementing its own
parsing. It goes from highest to lowest priorty, but does
not proceed to the next file if it has seen a value.
So in practice, this distinction never mattered much,
because it only triggered for values in the same file. And
there was not much point in doing that; the real value is in
overwriting values from lower-priority files.
However, this changed with the implementation of config
include files. Now we might see an include overriding a
value from the parent file, which is a sensible thing to do,
but git-config will flag as a duplication.
This patch drops the duplicate detection for git-config and
switches to a pure-overwrite model (for the single case;
--get-all can still be used if callers want to do something
more fancy).
As is shown by the modifications to the test suite, this is
a user-visible change in behavior. An alternative would be
to just change the include case, but this is much cleaner
for a few reasons:
1. If you change the include case, then to what? If you
just stop parsing includes after getting a value, then
you will get a _different_ answer than the regular
config parser (you'll get the first value instead of
the last value). So you'd want to implement overwrite
semantics anyway.
2. Even though it is a change in behavior for git-config,
it is bringing us in line with what the internal
parsers already do.
3. The file-order reimplementation is the only thing
keeping us from sharing more code with the internal
config parser, which will help keep differences to a
minimum.
Going under the assumption that the primary purpose of
git-config is to behave identically to how git's internal
parsing works, this change can be seen as a bug-fix.
Signed-off-by: Jeff King <peff@peff.net>
|
|
We check that we can "--get-all" a multi-valued variable,
but we do not actually confirm that the output is sensible.
Doing so reveals that it works fine, but this will help us
ensure we do not have regressions in the next few patches,
which will touch this area.
Signed-off-by: Jeff King <peff@peff.net>
|
|
This test checks that git-config fails for an ambiguous
"get", but we check the exact same thing 3 tests beforehand.
Signed-off-by: Jeff King <peff@peff.net>
|
|
The t1300 test script is quite old, and does not use our
modern techniques or styles. This patch updates it in the
following ways:
1. Use test_cmp instead of cmp (to make failures easier to
debug).
2. Use test_cmp instead of 'test $(command) = expected'.
This makes failures much easier to debug, and also
makes sure that $(command) exits appropriately.
3. Use test_must_fail (easier to read, and checks more
rigorously for signal death).
4. Write tests with the usual style of:
test_expect_success 'test name' '
test commands &&
...
'
rather than one-liners, or using backslash-continuation.
This is purely a style fixup.
There are still a few command happening outside of
test_expect invocations, but they are all innoccuous system
commands like "cat" and "cp". In an ideal world, each test
would be self sufficient and all commands would happen
inside test_expect, but it is not immediately obvious how
the grouping should work (some of the commands impact the
subsequent tests, and some of them are setting up and
modifying state that many tests depend on). This patch just
picks the low-hanging style fruit, and we can do more fixes
on top later.
Signed-off-by: Jeff King <peff@peff.net>
|
|
Use the i18n-specific test functions in test scripts for parseopt tests.
This issue was was introduced in v1.7.10.1-488-g54e6d:
54e6d i18n: parseopt: lookup help and argument translations when showing usage
and been broken under GETTEXT_POISON=YesPlease since.
Signed-off-by: Jiang Xin <worldhello.net@gmail.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
You can feed junk to "git config --rename-section", which
will result in a config file that git will not even parse
(so you cannot fix it with git-config). We already have
syntactic sanity checks when setting a variable; let's do
the same for section names.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When "git config" diagnoses an error in a configuration file and
shows the line number for the offending line, it miscounted if the
error was at the end of line.
By Martin Stenberg
* ms/maint-config-error-at-eol-linecount:
config: report errors at the EOL with correct line number
Conflicts:
t/t1300-repo-config.sh
|
|
A section in a config file with a missing "]" reports the next line
as bad, same goes to a value with a missing end quote.
This happens because the error is not detected until the end of the
line, when line number is already increased. Fix this by decreasing
line number by one for these cases.
Signed-off-by: Martin Stenberg <martin@gnutiken.se>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The git-config command sometimes operates on the default set
of config files (either reading from all, or writing to repo
config), and sometimes operates on a specific file. In the
latter case, we set the magic global config_exclusive_filename,
and the code in config.c does the right thing.
Instead, let's have git-config use the "advanced" variants
of config.c's functions which let it specify an individual
filename (or NULL for the default). This makes the code a
lot more obvious, and fixes two small bugs:
1. A relative path specified by GIT_CONFIG=foo will look
in the wrong directory if we have to chdir as part of
repository setup. We already handle this properly for
"git config -f foo", but the GIT_CONFIG lookup used
config_exclusive_filename directly. By dropping to a
single magic variable, the GIT_CONFIG case now just
works.
2. Calling "git config -f foo --edit" would not respect
core.editor. This is because just before editing, we
called git_config, which would respect the
config_exclusive_filename setting, even though this
particular git_config call was not about looking in the
user's specified file, but rather about loading actual
git config, just as any other git program would.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Breaks in a test assertion's && chain can potentially hide failures from
earlier commands in the chain by adding " &&" at the end of line to the
commands that need them.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Acked-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* mm/maint-config-explicit-bool-display:
config: display key_delim for config --bool --get-regexp
|
|
* jk/config-test-cleanup:
t1300: attempting to remove a non-existent .git/config is not an error
|
|
Since some tests before test number 79 ("quoting") are skipped, .git/config
does not exist and 'rm .git/config' fails. Fix this particular case.
While at it, move other instance of 'rm .git/config' that occur in this
file inside the test function to document that the test cases want to
protect themselves from remnants of earlier tests.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* jk/config-test-cleanup:
t1300: test mixed-case variable retrieval
t1300: put git invocations inside test function
|
|
* mm/maint-config-explicit-bool-display:
config: display key_delim for config --bool --get-regexp
|
|
We should be able to ask for a config value both by its
canonical all-lowercase name (as git does internally), as
well as by random mixed-case (which will be canonicalized by
git-config for us).
Subsections are a tricky point, though. Since we have both
[section "Foo"]
and
[section.Foo]
you might want git-config to canonicalize the subsection or
not, depending on which you are expecting. But there's no
way to communicate this; git-config sees only the key, and
doesn't know which type of section name will be in the
config file.
So it must leave the subsection intact, and it is up to the
caller to provide a canonical version of the subsection if
they want to match the latter form.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This is a very old script, and did a lot of:
echo whatever >expect
git config foo bar
test_expect_success 'cmp .git/config expect'
which meant that we didn't actually check that the call to
git-config succeeded. Fix this, and while we're at it,
modernize the style to use test_cmp.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The previous logic in show_config was to print the delimiter when the
value was set, but Boolean variables have an implicit value "true" when
they appear with no value in the config file. As a result, we got:
git_Config --get-regexp '.*\.Boolean' #1. Ok: example.boolean
git_Config --bool --get-regexp '.*\.Boolean' #2. NO: example.booleantrue
Fix this by defering the display of the separator until after the value
to display has been computed.
Reported-by: Brian Foster <brian.foster@maxim-ic.com>
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
Junio C Hamano
Jeff King
Johannes Schindelin
John Keeping
Lars Schneider
SZEDER Gábor
Eric Wong
David Tran
Kirill A. Shutemov
Carlos Martín Nieto
Jiang Xin
Martin Stenberg
Ramkumar Ramachandra
Johannes Sixt
Matthieu Moy