| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The config builtin does its own regex matching of values for the --get,
--get-all, and --get-regexp modes. Plumb the existing 'flags' parameter
to the get_value() method so we can initialize the value-pattern argument
as a fixed string instead of a regex pattern.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The git_config_set_multivar_in_file_gently() and related methods now
take a 'flags' bitfield, so add a new bit representing the --fixed-value
option from 'git config'. This alters the purpose of the value_pattern
parameter to be an exact string match. This requires some initialization
changes in git_config_set_multivar_in_file_gently() and a new strcmp()
call in the matches() method.
The new CONFIG_FLAGS_FIXED_VALUE flag is initialized in builtin/config.c
based on the --fixed-value option, and that needs to be updated in
several callers.
This patch only affects some of the modes of 'git config', and the rest
will be completed in the next change.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The 'git config' builtin takes a 'value-pattern' parameter for several
actions. This can cause confusion when expecting exact value matches
instead of regex matches, especially when the input string contains
metacharacters. While callers can escape the patterns themselves, it
would be more friendly to allow an argument to disable the pattern
matching in favor of an exact string match.
Add a new '--fixed-value' option that does not currently change the
behavior. The implementation will be filled in by later changes for
each appropriate action. For now, check and test that --fixed-value
will abort the command when included with an incompatible action or
without a 'value-pattern' argument.
The name '--fixed-value' was chosen over something simpler like
'--fixed' because some commands allow regular expressions on the
key in addition to the value.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The --replace-all option was added in 4ddba79d (git-config-set: add more
options) but was not tested along with the 'value-pattern' parameter.
Since we will be updating this option to optionally treat 'value-pattern'
as a fixed string, let's add a test here that documents the current
behavior.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Without additional modifiers, 'git config <key> <value>' attempts
to set a single value in the .git/config file. When the
value-pattern parameter is supplied, this command behaves in a
non-trivial manner.
Consider 'git config <key> <value> <value-pattern>'. The expected
behavior is as follows:
1. If there are multiple existing values that match 'value-pattern',
then the command fails. Users should use --replace-all instead.
2. If there is no existing values match 'value-pattern', then the
'key=value' pair is appended, making this 'key' a multi-valued
config setting.
3. If there is one existing value that matches 'value-pattern', then
the new config has one entry where 'key=value'.
Add a test that demonstrates these options. Break from the existing
pattern in t1300-config.sh to use 'git config --file=<file>' instead of
modifying .git/config directly to prevent possibly incompatible repo
states. Also use 'git config --file=<file> --list' for config state
comparison instead of the config file format. This makes the tests
more readable.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Running `git config --worktree` outside of a git repository hits a BUG()
when trying to enumerate the worktrees. Let's catch this error earlier
and die() with a friendlier message.
Signed-off-by: Matheus Tavares <matheus.bernardino@usp.br>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A configuration element used for credential subsystem can now use
wildcard pattern to specify for which set of URLs the entry
applies.
* bc/wildcard-credential:
credential: allow wildcard patterns when matching config
credential: use the last matching username in the config
t0300: add tests for some additional cases
t1300: add test for urlmatch with multiple wildcards
mailmap: add an additional email address for brian m. carlson
|
|
Our urlmatch code handles multiple wildcards, but we don't currently
have a test that checks this code path. Add a test that we handle this
case correctly to avoid any regressions.
Signed-off-by: brian m. carlson <bk2204@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When a user queries config values with --show-origin, often it's
difficult to determine what the actual "scope" (local, global, etc.) of
a given value is based on just the origin file.
Teach 'git config' the '--show-scope' option to print the scope of all
displayed config values. Note that we should never see anything of
"submodule" scope as that is only ever used by submodule-config.c when
parsing the '.gitmodules' file.
Signed-off-by: Matthew Rogers <mattr94@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Tests that required a custom configuration file to be created previously
used a file with non-alphanumeric characters including escaped double
quotes. This is not really necessary for the majority of tests
involving custom config files, and decreases test coverage on systems
that dissallow such filenames (Windows, etc.).
Create two files, one appropriate for testing quoting and one
appropriate for general use.
Signed-off-by: Matthew Rogers <mattr94@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Prepare for the following patches by removing extraneous indents from
HERE-DOCs used in config tests.
Signed-off-by: Matthew Rogers <mattr94@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In many test scripts, there are bespoke definitions of the single quote
that are some variation of this:
SQ="'"
Define a common $SQ variable in test-lib.sh and replace all usages of
these bespoke variables with the common one.
This change was done by running `git grep =\"\'\" t/` and
`git grep =\\\\\'` and manually changing the resulting definitions and
corresponding usages.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Avoid a bug in dash that's been fixed ever since its
ec2c84d ("[PARSER] Fix clobbering of checkkwd", 2011-03-15)[1] first
released with dash v0.5.7 in July 2011. This failing test was
introduced in 5f9674243d ("config: add --expiry-date", 2017-11-18).
This fixes 1/2 tests failing on Debian Lenny & Squeeze. The other
failure is due to 1b42f45255 ("git-svn: apply "svn.pathnameencoding"
before URL encoding", 2016-02-09).
The dash bug is triggered by this test because the heredoc contains a
command embedded in "$()" with a "{}" block coming right after
it. Refactoring the "$()" to e.g. be a variable that was set earlier
will also work around it, but let's instead break up the "EOF" and the
"{}".
An earlier version of this patch[2] mitigated the issue by breaking
the "$()" out of the "{}" block, that worked, but just because it
broke up the "EOF" and "{}" block. Putting e.g. "echo &&" between the
two would also work.
1. https://git.kernel.org/pub/scm/utils/dash/dash.git/
2. https://public-inbox.org/git/20181127164253.9832-1-avarab@gmail.com/
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In many config-related tests it's common to check if a config variable
has expected value and we want to print the differences when the test
fails. Doing it the normal way is three lines of shell code. Let's add
a function do to all this (and a little more).
This function has uses outside t1300 as well but I'm not going to
convert them all. And it will be used in the next commit where
per-worktree config feature is introduced.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Fix various places where the ordering was obviously wrong, meaning it
was easy to find with grep.
Signed-off-by: Matthew DeVore <matvore@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Instead of using a line-continuation and pipe on the second line, take
advantage of the shell's implicit line continuation after a pipe
character. So for example, instead of
some long line \
| next line
use
some long line |
next line
And add a blank line before and after the pipe where it aids readability
(it usually does).
This better matches the coding style documented in
Documentation/CodingGuidelines and used in shell scripts elsewhere in
the tree.
Signed-off-by: Matthew DeVore <matvore@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Test fixes.
* sg/test-must-be-empty:
tests: use 'test_must_be_empty' instead of 'test_cmp <empty> <out>'
tests: use 'test_must_be_empty' instead of 'test_cmp /dev/null <out>'
tests: use 'test_must_be_empty' instead of 'test ! -s'
tests: use 'test_must_be_empty' instead of '! test -s'
|
|
Using 'test_must_be_empty' is shorter and more idiomatic than
>empty &&
test_cmp empty out
as it saves the creation of an empty file. Furthermore, sometimes the
expected empty file doesn't have such a descriptive name like 'empty',
and its creation is far away from the place where it's finally used
for comparison (e.g. in 't7600-merge.sh', where two expected empty
files are created in the 'setup' test, but are used only about 500
lines later).
These cases were found by instrumenting 'test_cmp' to error out the
test script when it's used to compare empty files, and then converted
manually.
Note that even after this patch there still remain a lot of cases
where we use 'test_cmp' to check empty files:
- Sometimes the expected output is not hard-coded in the test, but
'test_cmp' is used to ensure that two similar git commands produce
the same output, and that output happens to be empty, e.g. the
test 'submodule update --merge - ignores --merge for new
submodules' in 't7406-submodule-update.sh'.
- Repetitive common tasks, including preparing the expected results
and running 'test_cmp', are often extracted into a helper
function, and some of this helper's callsites expect no output.
- For the same reason as above, the whole 'test_expect_success'
block is within a helper function, e.g. in 't3070-wildmatch.sh'.
- Or 'test_cmp' is invoked in a loop, e.g. the test 'cvs update
(-p)' in 't9400-git-cvsserver-server.sh'.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Recent update to "git config" broke updating variable in a
subsection, which has been corrected.
* sb/config-write-fix:
git-config: document accidental multi-line setting in deprecated syntax
config: fix case sensitive subsection names on writing
t1300: document current behavior of setting options
|
|
A user reported a submodule issue regarding a section mix-up,
but it could be boiled down to the following test case:
$ git init test && cd test
$ git config foo."Bar".key test
$ git config foo."bar".key test
$ tail -n 3 .git/config
[foo "Bar"]
key = test
key = test
Sub sections are case sensitive and we have a test for correctly reading
them. However we do not have a test for writing out config correctly with
case sensitive subsection names, which is why this went unnoticed in
6ae996f2acf (git_config_set: make use of the config parser's event
stream, 2018-04-09)
Unfortunately we have to make a distinction between old style configuration
that looks like
[foo.Bar]
key = test
and the new quoted style as seen above. The old style is documented as
case-agnostic, hence we need to keep 'strncasecmp'; although the
resulting setting for the old style config differs from the configuration.
That will be fixed in a follow up patch.
Reported-by: JP Sugarbroad <jpsugar@google.com>
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This documents current behavior of the config machinery, when changing
the value of some settings. This patch just serves to provide a baseline
for the follow up that will fix some issues with the current behavior.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
These tests intentionally break the &&-chain after using 'unset' since
they don't know if 'unset' will succeed or fail and don't want a local
'unset' failure to fail the test overall. We can do better by using
sane_unset(), which can be linked into the &&-chain as usual.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git config --get" learned the "--default" option, to help the
calling script. Building on top of the tb/config-type topic, the
"git config" learns "--type=color" type. Taken together, you can
do things like "git config --get foo.color --default blue" and get
the ANSI color sequence for the color given to foo.color variable,
or "blue" if the variable does not exist.
* tb/config-default:
builtin/config: introduce `color` type specifier
config.c: introduce 'git_config_color' to parse ANSI colors
builtin/config: introduce `--default`
|
|
The "git config" command uses separate options e.g. "--int",
"--bool", etc. to specify what type the caller wants the value to
be interpreted as. A new "--type=<typename>" option has been
introduced, which would make it cleaner to define new types.
* tb/config-type:
builtin/config.c: support `--type=<type>` as preferred alias for `--<type>`
builtin/config.c: treat type specifiers singularly
|
|
"git config --unset a.b", when "a.b" is the last variable in an
otherwise empty section "a", left an empty section "a" behind, and
worse yet, a subsequent "git config a.c value" did not reuse that
empty shell and instead created a new one. These have been
(partially) corrected.
* js/empty-config-section-fix:
git_config_set: reuse empty sections
git config --unset: remove empty sections (in the common case)
git_config_set: make use of the config parser's event stream
git_config_set: do not use a state machine
config_set_store: rename some fields for consistency
config: avoid using the global variable `store`
config: introduce an optional event stream while parsing
t1300: `--unset-all` can leave an empty section behind (bug)
t1300: add a few more hairy examples of sections becoming empty
t1300: remove unreasonable expectation from TODO
t1300: avoid relying on a bug
config --replace-all: avoid extra line breaks
t1300: demonstrate that --replace-all can "invent" newlines
t1300: rename it to reflect that `repo-config` was deprecated
git_config_set: fix off-by-two
|
|
It can happen quite easily that the last setting in a config section is
removed, and to avoid confusion when there are comments in the config
about that section, we keep a lone section header, i.e. an empty
section.
Now that we use the `event_fn` callback, it is easy to add support for
re-using empty sections, so let's do that.
Note: t5512-ls-remote requires that this change is applied *after* the
patch "git config --unset: remove empty sections (in the common case)":
without that patch, there would be empty `transfer` and `uploadpack`
sections ready for reuse, but in the *wrong* order (and sconsequently,
t5512's "overrides work between mixed transfer/upload-pack hideRefs"
would fail).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The original reasoning for not removing section headers upon removal of
the last entry went like this: the user could have added comments about
the section, or about the entries therein, and if there were other
comments there, we would not know whether we should remove them.
In particular, a concocted example was presented that looked like this
(and was added to t1300):
# some generic comment on the configuration file itself
# a comment specific to this "section" section.
[section]
# some intervening lines
# that should also be dropped
key = value
# please be careful when you update the above variable
The ideal thing for `git config --unset section.key` in this case would
be to leave only the first line behind, because all the other comments
are now obsolete.
However, this is unfeasible, short of adding a complete Natural Language
Processing module to Git, which seems not only a lot of work, but a
totally unreasonable feature (for little benefit to most users).
Now, the real kicker about this problem is: most users do not edit their
config files at all! In their use case, the config looks like this
instead:
[section]
key = value
... and it is totally obvious what should happen if the entry is
removed: the entire section should vanish.
Let's generalize this observation to this conservative strategy: if we
are removing the last entry from a section, and there are no comments
inside that section nor surrounding it, then remove the entire section.
Otherwise behave as before: leave the now-empty section (including those
comments, even ones about the now-deleted entry).
We have to be extra careful to handle the case where more than one entry
is removed: any subset of them might be the last entries of their
respective sections (and if there are no comments in or around that
section, the section should be removed, too).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We already have a test demonstrating that removing the last entry from a
config section fails to remove the section header of the now-empty
section.
The same can happen, of course, if we remove the last entries in one fell
swoop. This is *also* a bug, and should be fixed at the same time.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
During the review of the first iteration of the patch series to remove
sections that become empty upon --unset or --unset-all, Jeff King
identified a couple of problematic cases with the backtracking approach
that was still used then to "look backwards for the section header":
https://public-inbox.org/git/20180329213229.GG2939@sigill.intra.peff.net/
This patch adds a couple of concocted examples designed to fool a
backtracking parser.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In https://public-inbox.org/git/7vvc8alzat.fsf@alter.siamese.dyndns.org/
a reasonable patch was made quite a bit less so by changing a test case
demonstrating a bug to a test case that demonstrates that we ask for too
much: the test case 'unsetting the last key in a section removes header'
now expects a future bug fix to be able to determine whether a free-form
comment above a section header refers to said section or not.
Rather than shooting for the stars (and not even getting off the
ground), let's start shooting for something obtainable and be reasonably
confident that we *can* get it.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The test case 'unset with cont. lines' relied on a bug that is about to
be fixed: it tests *explicitly* that removing the last entry from a
config section leaves an *empty* section behind.
Let's fix this test case not to rely on that behavior, simply by
preventing the section from becoming empty.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When replacing multiple config entries at once, we did not re-set the
flag that indicates whether we need to insert a new-line before the new
entry. As a consequence, an extra new-line was inserted under certain
circumstances.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
Derrick Stolee
Matheus Tavares
Junio C Hamano
brian m. carlson
Matthew Rogers
Denton Liu
Ævar Arnfjörð Bjarmason
Nguyễn Thái Ngọc Duy
Matthew DeVore
SZEDER Gábor
Stefan Beller
Eric Sunshine
Johannes Schindelin