| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Gettextize the "Updating %s..%s\n" message. A test in
t1200-tutorial.sh explicitly checked for this message. Split it into
two tests to skip the test_cmp test under GETTEXT_POISON=YesPlease.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Breaks in a test assertion's && chain can potentially hide
failures from earlier commands in the chain.
Commands intended to fail should be marked with !, test_must_fail, or
test_might_fail. The examples in this patch do not require that.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"find path ..." command should exit with zero status only when all path
operands were traversed successfully. When a non-existent path is given,
however, some implementations of "find" (e.g. OpenBSD 4.6) exit with zero
status and break the last test in t1200.
Rewrite the test to check that there is no regular files in the objects
fan-out directories to work around this bug; it is closer to what we are
testing anyway.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The fourth test of show-branch in t1200 test was failing but only
sometimes. It only failed when two commits created in an earlier
test had different timestamps. When they were created within the
same second, the actual output matched the expected output.
Fix this by using test_tick to force reliable timestamps and update
the expected output so it does not to depend on the commits made in
the same sacond.
Signed-off-by: Nanako Shiraishi <nanako3@lavabit.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A tree-wide bikeshedding to replace "fast forward" into "fast-forward" is
in 'master'. Since we want to keep this "test modernization" series
mergeable also to the maintenance track, we would need to tweak the test
to accept both old spellings and new spellings.
Sigh... This kind of headache is the primary reason we try not to allow
such a tree-wide bike-shedding, but the damage has already been done.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Instead of using bare "cmp", use "test_cmp". Output when the test is run
with a -v option becomes easier to diagnose when something goes wrong
because on saner platforms test_cmp uses "diff -u".
There is no need to put an extra backslash to a line that ends with a '|'
(i.e. the upstream of a pipe).
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
There were some differences between t1200 and the gitcore-tutorial. Add
missing tests for manually merging two branches, and use the same
commands in both files.
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Many parts of the tests in t1200 are run outside the test harness,
circumventing the usefulness of -v and spewing messages to stdout when
-v isn't used. Fix these problems by modernizing the test a bit.
An extra test_done has existed since commit 6a74642 (git-commit --amend:
two fixes., 2006-04-20) leading to the last 6 tests never being run.
Remove it and teach the resolve merge test about fast-forward merges.
Also fix the last test's incorrect find command and prune before
checking for unpacked objects so we remove the unreachable conflict-marked
blob.
Finally, we remove the TODO notes, because fetch, push, and clone have
their own tests since t1200 was introduced and we're not going to add
them here 4 years later.
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Converts tests between t0050-t3903.
Signed-off-by: Nanako Shiraishi <nanako3@lavabit.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This patch changes every occurrence of "! git" -- with the meaning
that a git call has to gracefully fail -- into "test_must_fail git".
This is useful to
- make sure the test does not fail because of a signal,
e.g. SIGSEGV, and
- advertise the use of "test_must_fail" for new tests.
Signed-off-by: Stephan Beyer <s-beyer@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Originally, test_expect_failure was designed to be the opposite
of test_expect_success, but this was a bad decision. Most tests
run a series of commands that leads to the single command that
needs to be tested, like this:
test_expect_{success,failure} 'test title' '
setup1 &&
setup2 &&
setup3 &&
what is to be tested
'
And expecting a failure exit from the whole sequence misses the
point of writing tests. Your setup$N that are supposed to
succeed may have failed without even reaching what you are
trying to test. The only valid use of test_expect_failure is to
check a trivial single command that is expected to fail, which
is a minority in tests of Porcelain-ish commands.
This large-ish patch rewrites all uses of test_expect_failure to
use test_expect_success and rewrites the condition of what is
tested, like this:
test_expect_success 'test title' '
setup1 &&
setup2 &&
setup3 &&
! this command should fail
'
test_expect_failure is redefined to serve as a reminder that
that test *should* succeed but due to a known breakage in git it
currently does not pass. So if git-foo command should create a
file 'bar' but you discovered a bug that it doesn't, you can
write a test like this:
test_expect_failure 'git-foo should create bar' '
rm -f bar &&
git foo &&
test -f bar
'
This construct acts similar to test_expect_success, but instead
of reporting "ok/FAIL" like test_expect_success does, the
outcome is reported as "FIXED/still broken".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This uses the remove-dashes target to replace "git-frotz" to "git frotz".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This uses "git-apply --whitespace=strip" to fix whitespace errors that have
crept in to our source files over time. There are a few files that need
to have trailing whitespaces (most notably, test vectors). The results
still passes the test, and build result in Documentation/ area is unchanged.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
It is nicer to let the user know when a commit succeeded all the time,
not only the first time. Also the commit sha1 is much more useful than
the tree sha1 in this case.
This patch also introduces a -q switch to supress this message as well
as the summary of created/deleted files.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Signed-off-by: Robin Rosenberg <robin.rosenberg@dewire.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
* fix:
git-commit --amend: two fixes.
|
|
When running "git commit --amend" only to fix the commit log
message without any content change, we mistakenly showed the
git-status output that says "nothing to commit" without
commenting it out.
If you have already run update-index but you want to amend the
top commit, "git commit --amend --only" without any paths should
have worked, because --only means "starting from the base
commit, update-index these paths only to prepare the index to
commit, and perform the commit". However, we refused -o without
paths.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
On Sun, 16 Apr 2006, Junio C Hamano wrote:
>
> In the mid-term, I am hoping we can drop the generate_header()
> callchain _and_ the custom code that formats commit log in-core,
> found in cmd_log_wc().
Ok, this was nastier than expected, just because the dependencies between
the different log-printing stuff were absolutely _everywhere_, but here's
a patch that does exactly that.
The patch is not very easy to read, and the "--patch-with-stat" thing is
still broken (it does not call the "show_log()" thing properly for
merges). That's not a new bug. In the new world order it _should_ do
something like
if (rev->logopt)
show_log(rev, rev->logopt, "---\n");
but it doesn't. I haven't looked at the --with-stat logic, so I left it
alone.
That said, this patch removes more lines than it adds, and in particular,
the "cmd_log_wc()" loop is now a very clean:
while ((commit = get_revision(rev)) != NULL) {
log_tree_commit(rev, commit);
free(commit->buffer);
commit->buffer = NULL;
}
so it doesn't get much prettier than this. All the complexity is entirely
hidden in log-tree.c, and any code that needs to flush the log literally
just needs to do the "if (rev->logopt) show_log(...)" incantation.
I had to make the combined_diff() logic take a "struct rev_info" instead
of just a "struct diff_options", but that part is pretty clean.
This does change "git whatchanged" from using "diff-tree" as the commit
descriptor to "commit", and I changed one of the tests to reflect that new
reality. Otherwise everything still passes, and my other tests look fine
too.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
fast-forward message.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
- "git commit" without _any_ parameter keeps the traditional
behaviour. It commits the current index.
We commit the whole index even when this form is run from a
subdirectory.
- "git commit --include paths..." (or "git commit -i paths...")
is equivalent to:
git update-index --remove paths...
git commit
- "git commit paths..." acquires a new semantics. This is an
incompatible change that needs user training, which I am
still a bit reluctant to swallow, but enough people seem to
have complained that it is confusing to them. It
1. refuses to run if $GIT_DIR/MERGE_HEAD exists, and reminds
trained git users that the traditional semantics now needs
-i flag.
2. refuses to run if named paths... are different in HEAD and
the index (ditto about reminding). Added paths are OK.
3. reads HEAD commit into a temporary index file.
4. updates named paths... from the working tree in this
temporary index.
5. does the same updates of the paths... from the working
tree to the real index.
6. makes a commit using the temporary index that has the
current HEAD as the parent, and updates the HEAD with this
new commit.
- "git commit --all" can run from a subdirectory, but it updates
the index with all the modified files and does a whole tree
commit.
- In all cases, when the command decides not to create a new
commit, the index is left as it was before the command is
run. This means that the two "git diff" in the following
sequence:
$ git diff
$ git commit -a
$ git diff
would show the same diff if you abort the commit process by
making the commit log message empty.
This commit also introduces much requested --author option.
$ git commit --author 'A U Thor <author@example.com>'
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
This changes the character used to mark the commits that is on the
branch from '+' to '*' for the current branch, to make it stand out.
Also we show '-' for merge commits.
When you have a handful branches with relatively long diversion, it
is easier to see which one is the current branch this way.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
just for consistency.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Because a batch-oriented script creates many commits within a second
on a fast machine, show-branch output of the test results are unstable
without topo-order.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Lacking reliable symlinks, the instructions in the tutorial did not work
in a cygwin setup. Also, a few outputs were not correct.
This patch fixes these, and adds a test case which follows the
instructions of the tutorial (except git-clone, -fetch and -push, which I
have not done yet).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
Junio C Hamano
Ævar Arnfjörð Bjarmason
Jonathan Nieder
Nanako Shiraishi
Stephen Boyd
Stephan Beyer
Junio C Hamano
Nicolas Pitre
Robin Rosenberg
Linus Torvalds
Johannes Schindelin