| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Further polishing of "git sparse-checkout".
* en/sparse-checkout-fixes:
sparse-checkout: reject arguments in cone-mode that look like patterns
sparse-checkout: error or warn when given individual files
sparse-checkout: pay attention to prefix for {set, add}
sparse-checkout: correctly set non-cone mode when expected
sparse-checkout: correct reapply's handling of options
|
|
"git sparse-checkout" wants to work with per-worktree configuration,
but did not work well in a worktree attached to a bare repository.
* ds/sparse-checkout-requires-per-worktree-config:
config: make git_configset_get_string_tmp() private
worktree: copy sparse-checkout patterns and config on add
sparse-checkout: set worktree-config correctly
config: add repo_config_set_worktree_gently()
worktree: create init_worktree_config()
Documentation: add extensions.worktreeConfig details
|
|
In sparse-checkout add/set under cone mode, the arguments passed are
supposed to be directories rather than gitignore-style patterns.
However, given the amount of effort spent in the manual discussing
patterns, it is easy for users to assume they need to pass patterns such
as
/foo/*
or
!/bar/*/
or perhaps they really do ignore the directory rule and specify a
random gitignore-style pattern like
*.c
To help catch such mistakes, throw an error if any of the positional
arguments:
* starts with any of '/!'
* contains any of '*?[]'
Inform users they can pass --skip-checks if they have a directory that
really does have such special characters in its name. (We exclude '\'
because of sparse-checkout's special handling of backslashes; see
the MINGW test in t1091.46.)
Reviewed-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The set and add subcommands accept multiple positional arguments.
The meaning of these arguments differs slightly in the two modes:
Cone mode only accepts directories. If given a file, it would
previously treat it as a directory, causing not just the file itself to
be included but all sibling files as well -- likely against users'
expectations. Throw an error if the specified path is a file in the
index. Provide a --skip-checks argument to allow users to override
(e.g. for the case when the given path IS a directory on another
branch).
Non-cone mode accepts general gitignore patterns. There are many
reasons to avoid this mode, but one possible reason to use it instead of
cone mode: to be able to select individual files within a directory.
However, if a file is passed to set/add in non-cone mode, you won't be
selecting a single file, you'll be selecting a file with the same name
in any directory. Thus users will likely want to prefix any paths they
specify with a leading '/' character; warn users if the patterns they
specify exactly name a file because it means they are likely missing
such a leading slash.
Reviewed-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In cone mode, non-option arguments to set & add are clearly paths, and
as such, we should pay attention to prefix.
In non-cone mode, it is not clear that folks intend to provide paths
since the inputs are gitignore-style patterns. Paying attention to
prefix would prevent folks from doing things like
git sparse-checkout add /.gitattributes
git sparse-checkout add '/toplevel-dir/*'
In fact, the former will result in
fatal: '/.gitattributes' is outside repository...
while the later will result in
fatal: Invalid path '/toplevel-dir': No such file or directory
despite the fact that both are valid gitignore-style patterns that would
select real files if added to the sparse-checkout file. This might lead
people to just use the path without the leading slash, potentially
resulting in them grabbing files with the same name throughout the
directory hierarchy contrary to their expectations. See also [1] and
[2]. Adding prefix seems to just be fraught with error; so for now
simply throw an error in non-cone mode when sparse-checkout set/add are
run from a subdirectory.
[1] https://lore.kernel.org/git/e1934710-e228-adc4-d37c-f706883bd27c@gmail.com/
[2] https://lore.kernel.org/git/CABPp-BHXZ-XLxY0a3wCATfdq=6-EjW62RzbxKAoFPeXfJswD2w@mail.gmail.com/
Helped-by: Junio Hamano <gitster@pobox.com>
Reviewed-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Commit 4e256731d6 ("sparse-checkout: enable reapply to take
--[no-]{cone,sparse-index}", 2021-12-14) made it so that reapply could
take additional options but added no tests. Tests would have shown that
the feature doesn't work because the initial values are set AFTER
parsing the command line options instead of before. Add a test and set
the initial value at the appropriate time.
Reviewed-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Mark in various places in the code that the sparse index and the
split index features are mutually incompatible.
* js/sparse-vs-split-index:
split-index: it really is incompatible with the sparse index
t1091: disable split index
sparse-index: sparse index is disallowed when split index is active
|
|
"git sparse-checkout init" failed to write into $GIT_DIR/info
directory when the repository was created without one, which has
been corrected to auto-create it.
* jt/sparse-checkout-leading-dir-fix:
sparse-checkout: create leading directory
|
|
When adding a new worktree, it is reasonable to expect that we want to
use the current set of sparse-checkout settings for that new worktree.
This is particularly important for repositories where the worktree would
become too large to be useful. This is even more important when using
partial clone as well, since we want to avoid downloading the missing
blobs for files that should not be written to the new worktree.
The only way to create such a worktree without this intermediate step of
expanding the full worktree is to copy the sparse-checkout patterns and
config settings during 'git worktree add'. Each worktree has its own
sparse-checkout patterns, and the default behavior when the
sparse-checkout file is missing is to include all paths at HEAD. Thus,
we need to have patterns from somewhere, they might as well be the
current worktree's patterns. These are then modified independently in
the future.
In addition to the sparse-checkout file, copy the worktree config file
if worktree config is enabled and the file exists. This will copy over
any important settings to ensure the new worktree behaves the same as
the current one. The only exception we must continue to make is that
core.bare and core.worktree should become unset in the worktree's config
file.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
`git sparse-checkout set/init` enables worktree-specific
configuration[*] by setting extensions.worktreeConfig=true, but neglects
to perform the additional necessary bookkeeping of relocating
`core.bare=true` and `core.worktree` from $GIT_COMMON_DIR/config to
$GIT_COMMON_DIR/config.worktree, as documented in git-worktree.txt. As a
result of this oversight, these settings, which are nonsensical for
secondary worktrees, can cause Git commands to incorrectly consider a
worktree bare (in the case of `core.bare`) or operate on the wrong
worktree (in the case of `core.worktree`). Fix this problem by taking
advantage of the recently-added init_worktree_config() which enables
`extensions.worktreeConfig` and takes care of necessary bookkeeping.
While at it, for backward-compatibility reasons, also stop upgrading the
repository format to "1" since doing so is (unintentionally) not
required to take advantage of `extensions.worktreeConfig`, as explained
by 11664196ac ("Revert "check_repository_format_gently(): refuse
extensions for old repositories"", 2020-07-15).
[*] The main reason to use worktree-specific config for the
sparse-checkout builtin was to avoid enabling sparse-checkout patterns
in one and causing a loss of files in another. If a worktree does not
have a sparse-checkout patterns file, then the sparse-checkout logic
will not kick in on that worktree.
Reported-by: Sean Allred <allred.sean@gmail.com>
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In 61feddcdf28 (tests: disable GIT_TEST_SPLIT_INDEX for sparse index
tests, 2021-08-26), it was already called out that the split index
feature is incompatible with the sparse index feature, and its commit
message wondered aloud whether more checks would be required to ensure
that the split index and sparse index features aren't enabled at the
same time.
We are about to introduce such additional checks, and indeed, t1091
would utterly fail with them. Therefore, let's preemptively disable the
split index for the entirety of t1091.
This partially reverts above-mentioned patch because it covered only one
test case whereas we want to cover the entire test script.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When creating the sparse-checkout file, Git does not create the leading
directory, "$GIT_DIR/info", if it does not exist. This causes problems
if the repository does not have that directory. Therefore, ensure that
the leading directory is created.
This is the only "open" in builtin/sparse-checkout.c that does not have
a leading directory check. (The other one in write_patterns_and_update()
does.)
Note that the test needs to explicitly specify a template when running
"git init" because the default template used in the tests has the
"info/" directory included.
Helped-by: Jose Lopes <jabolopes@google.com>
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git fetch" and "git pull" are now declared sparse-index clean.
Also "git ls-files" learns the "--sparse" option to help debugging.
* ds/fetch-pull-with-sparse-index:
test-read-cache: remove --table, --expand options
t1091/t3705: remove 'test-tool read-cache --table'
t1092: replace 'read-cache --table' with 'ls-files --sparse'
ls-files: add --sparse option
fetch/pull: use the sparse index
|
|
Certain sparse-checkout patterns that are valid in non-cone mode
led to segfault in cone mode, which has been corrected.
* ds/sparse-checkout-malformed-pattern-fix:
sparse-checkout: refuse to add to bad patterns
sparse-checkout: fix OOM error with mixed patterns
sparse-checkout: fix segfault on malformed patterns
|
|
The "init" and "set" subcommands in "git sparse-checkout" have been
unified for a better user experience and performance.
* en/sparse-checkout-set:
sparse-checkout: remove stray trailing space
clone: avoid using deprecated `sparse-checkout init`
Documentation: clarify/correct a few sparsity related statements
git-sparse-checkout.txt: update to document init/set/reapply changes
sparse-checkout: enable reapply to take --[no-]{cone,sparse-index}
sparse-checkout: enable `set` to initialize sparse-checkout mode
sparse-checkout: split out code for tweaking settings config
sparse-checkout: disallow --no-stdin as an argument to set
sparse-checkout: add sanity-checks on initial sparsity state
sparse-checkout: break apart functions for sparse_checkout_(set|add)
sparse-checkout: pass use_stdin as a parameter instead of as a global
|
|
When in cone mode sparse-checkout, it is unclear how 'git
sparse-checkout add <dir1> ...' should behave if the existing
sparse-checkout file does not match the cone mode patterns. Change the
behavior to fail with an error message about the existing patterns.
Also, all cone mode patterns start with a '/' character, so add that
restriction. This is necessary for our example test 'cone mode: warn on
bad pattern', but also requires modifying the example sparse-checkout
file we use to test the warnings related to recognizing cone mode
patterns.
This error checking would cause a failure further down the test script
because of a test that adds non-cone mode patterns without cleaning them
up. Perform that cleanup as part of the test now.
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add a test to t1091-sparse-checkout-builtin.sh that would result in an
infinite loop and out-of-memory error before this change. The issue
relies on having non-cone-mode patterns while trying to modify the
patterns in cone-mode.
The fix is simple, allowing us to break from the loop when the input
path does not contain a slash, as the "dir" pattern we added does not.
This is only a fix to the critical out-of-memory error. A better
response to such a strange state will follow in a later change.
Reported-by: Calbabreaker <calbabreaker@gmail.com>
Helped-by: Taylor Blau <me@ttaylorr.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Then core.sparseCheckoutCone is enabled, the sparse-checkout patterns are
used to populate two hashsets that accelerate pattern matching. If the user
modifies the sparse-checkout file outside of the 'sparse-checkout' builtin,
then strange patterns can happen, triggering some error checks.
One of these error checks is possible to hit when some special characters
exist in a line. A warning message is correctly written to stderr, but then
there is additional logic that attempts to remove the line from the hashset
and free the data. This leads to a segfault in the 'git sparse-checkout
list' command because it iterates over the contents of the hashset, which is
now invalid.
The fix here is to stop trying to remove from the hashset. In addition,
we disable cone mode sparse-checkout because of the malformed data. This
results in the pattern-matching working with a possibly-slower
algorithm, but using the patterns as they are in the sparse-checkout
file.
This also changes the behavior of commands such as 'git sparse-checkout
list' because the output patterns will be the contents of the
sparse-checkout file instead of the list of directories. This is an
existing behavior for other types of bad patterns.
Add a test that triggers the segfault without the code change.
Reported-by: John Burnett <johnburnett@johnburnett.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Now that 'git ls-files --sparse' exists, we can use it to verify the
state of a sparse index instead of 'test-tool read-cache table'. Replace
these usages within t1091-sparse-checkout-builtin.sh and
t3705-add-sparse-checkout.sh.
The important changes are due to the different output format. In t3705,
we need to use the '--stage' output to get a file mode and OID, but
it also includes a stage value and drops the object type. This leads
to some differences in how we handle looking for specific entries.
In t1091, the test focuses on enabling the sparse index, so we do not
need the --stage flag to demonstrate how the index changes, and instead
can use a diff.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Most sparse-checkout subcommands (list, add, reapply) only make sense
when already in a sparse state. Add a quick check that will error out
early if this is not the case.
Also document with a comment why we do not exit early in `disable` even
when core.sparseCheckout starts as false.
Reviewed-by: Derrick Stolee <dstolee@microsoft.com>
Reviewed-by: Victoria Dye <vdye@github.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Failures within `for` and `while` loops can go unnoticed if not detected
and signaled manually since the loop itself does not abort when a
contained command fails, nor will a failure necessarily be detected when
the loop finishes since the loop returns the exit code of the last
command it ran on the final iteration, which may not be the command
which failed. Therefore, detect and signal failures manually within
loops using the idiom `|| return 1` (or `|| exit 1` within subshells).
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git add", "git mv", and "git rm" have been adjusted to avoid
updating paths outside of the sparse-checkout definition unless
the user specifies a "--sparse" option.
* ds/add-rm-with-sparse-index:
advice: update message to suggest '--sparse'
mv: refuse to move sparse paths
rm: skip sparse paths with missing SKIP_WORKTREE
rm: add --sparse option
add: update --renormalize to skip sparse paths
add: update --chmod to skip sparse paths
add: implement the --sparse option
add: skip tracked paths outside sparse-checkout cone
add: fail when adding an untracked sparse file
dir: fix pattern matching on dirs
dir: select directories correctly
t1092: behavior for adding sparse files
t3705: test that 'sparse_entry' is unstaged
|
|
When 'git add' adds a tracked file that is outside of the
sparse-checkout cone, it checks the SKIP_WORKTREE bit to see if the file
exists outside of the sparse-checkout cone. This is usually correct,
except in the case of a merge conflict outside of the cone.
Modify add_pathspec_matched_against_index() to be more careful about
paths by checking the sparse-checkout patterns in addition to the
SKIP_WORKTREE bit. This causes 'git add' to no longer allow files
outside of the cone that removed the SKIP_WORKTREE bit due to a merge
conflict.
With only this change, users will only be able to add the file after
adding the file to the sparse-checkout cone. A later change will allow
users to force adding even though the file is outside of the
sparse-checkout cone.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The sparse index and split index features are said to be currently
incompatible [1], and consequently GIT_TEST_SPLIT_INDEX=1 might
interfere with the test cases exercising the sparse index feature.
Therefore GIT_TEST_SPLIT_INDEX is already explicitly disabled for the
whole of 't1092-sparse-checkout-compatibility.sh'. There are,
however, two other test cases exercising sparse index, namely
'sparse-index enabled and disabled' in
't1091-sparse-checkout-builtin.sh' and 'status succeeds with sparse
index' in 't7519-status-fsmonitor.sh', and these two could fail with
GIT_TEST_SPLIT_INDEX=1 as well [2].
Unset GIT_TEST_SPLIT_INDEX and disable the split index in these two
test cases to avoid such interference.
Note that this is the minimal change to merely avoid failures when
these test cases are run with GIT_TEST_SPLIT_INDEX=1. Interestingly,
though, without these changes the 'git sparse-checkout init --cone
--sparse-index' commands still succeed even with split index, and set
all the necessary configuration variables and create the initial
'$GIT_DIR/info/sparse-checkout' file, but the test failures are caused
by later sanity checks finding that the index is not in fact a sparse
index. This indicates that 'git sparse-checkout init --sparse-index'
lacks some error checking and its tests lack coverage related to split
index, but fixing those issues is beyond the scope of this patch
series.
[1] https://public-inbox.org/git/48e9c3d6-407a-1843-2d91-22112410e3f8@gmail.com/
[2] Neither of these test cases fail at the moment, because
GIT_TEST_SPLIT_INDEX=1 is broken and never splits the index, and
it broke long before the sparse index feature was added.
This patch series is about to fix GIT_TEST_SPLIT_INDEX, and then
both test cases mentioned above would fail.
(The diff is best viewed with '--ignore-all-space')
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Acked-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When changing the scope of a sparse-checkout using cone mode, we might
have some tracked directories go out of scope. The current logic removes
the tracked files from within those directories, but leaves the ignored
files within those directories. This is a bit unexpected to users who
have given input to Git saying they don't need those directories
anymore.
This is something that is new to the cone mode pattern type: the user
has explicitly said "I want these directories and _not_ those
directories." The typical sparse-checkout patterns more generally apply
to "I want files with with these patterns" so it is natural to leave
ignored files as they are. This focus on directories in cone mode
provides us an opportunity to change the behavior.
Leaving these ignored files in the sparse directories makes it
impossible to gain performance benefits in the sparse index. When we
track into these directories, we need to know if the files are ignored
or not, which might depend on the _tracked_ .gitignore file(s) within
the sparse directory. This depends on the indexed version of the file,
so the sparse directory must be expanded.
We must take special care to look for untracked, non-ignored files in
these directories before deleting them. We do not want to delete any
meaningful work that the users were doing in those directories and
perhaps forgot to add and commit before switching sparse-checkout
definitions. Since those untracked files might be code files that
generated ignored build output, also do not delete any ignored files
from these directories in that case. The users can recover their state
by resetting their sparse-checkout definition to include that directory
and continue. Alternatively, they can see the warning that is presented
and delete the directory themselves to regain the performance they
expect.
By deleting the sparse directories when changing scope (or running 'git
sparse-checkout reapply') we regain these performance benefits as if the
repository was in a clean state.
Since these ignored files are frequently build output or helper files
from IDEs, the users should not need the files now that the tracked
files are removed. If the tracked files reappear, then they will have
newer timestamps than the build artifacts, so the artifacts will need to
be regenerated anyway.
Use the sparse-index as a data structure in order to find the sparse
directories that can be safely deleted. Re-expand the index to a full
one if it was full before.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We use 'git sparse-checkout init --cone --sparse-index' to toggle the
sparse-index feature. It makes sense to also disable it when running
'git sparse-checkout disable'. This is particularly important because it
removes the extensions.sparseIndex config option, allowing other tools
to use this Git repository again.
This does mean that 'git sparse-checkout init' will not re-enable the
sparse-index feature, even if it was previously enabled.
While testing this feature, I noticed that the sparse-index was not
being written on the first run, but by a second. This was caught by the
call to 'test-tool read-cache --table'. This requires adjusting some
assignments to core_apply_sparse_checkout and pl.use_cone_patterns in
the sparse_checkout_init() logic.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Carefully excluding t1309, which sees independent development elsewhere
at the time of writing, we transition above-mentioned tests to the
default branch name `main`. This trick was performed via
$ (cd t &&
sed -i -e 's/master/main/g' -e 's/MASTER/MAIN/g' \
-e 's/Master/Main/g' -e 's/naster/nain/g' -- t[01]*.sh &&
git checkout HEAD -- t1309\*)
Note that t5533 contains a variation of the name `master` (`naster`)
that we rename here, too.
This allows us to define `GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=main`
for those tests.
Helped-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In addition to the manual adjustment to let the `linux-gcc` CI job run
the test suite with `master` and then with `main`, this patch makes sure
that GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME is set in all test scripts
that currently rely on the initial branch name being `master by default.
To determine which test scripts to mark up, the first step was to
force-set the default branch name to `master` in
- all test scripts that contain the keyword `master`,
- t4211, which expects `t/t4211/history.export` with a hard-coded ref to
initialize the default branch,
- t5560 because it sources `t/t556x_common` which uses `master`,
- t8002 and t8012 because both source `t/annotate-tests.sh` which also
uses `master`)
This trick was performed by this command:
$ sed -i '/^ *\. \.\/\(test-lib\|lib-\(bash\|cvs\|git-svn\)\|gitweb-lib\)\.sh$/i\
GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=master\
export GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME\
' $(git grep -l master t/t[0-9]*.sh) \
t/t4211*.sh t/t5560*.sh t/t8002*.sh t/t8012*.sh
After that, careful, manual inspection revealed that some of the test
scripts containing the needle `master` do not actually rely on a
specific default branch name: either they mention `master` only in a
comment, or they initialize that branch specificially, or they do not
actually refer to the current default branch. Therefore, the
aforementioned modification was undone in those test scripts thusly:
$ git checkout HEAD -- \
t/t0027-auto-crlf.sh t/t0060-path-utils.sh \
t/t1011-read-tree-sparse-checkout.sh \
t/t1305-config-include.sh t/t1309-early-config.sh \
t/t1402-check-ref-format.sh t/t1450-fsck.sh \
t/t2024-checkout-dwim.sh \
t/t2106-update-index-assume-unchanged.sh \
t/t3040-subprojects-basic.sh t/t3301-notes.sh \
t/t3308-notes-merge.sh t/t3423-rebase-reword.sh \
t/t3436-rebase-more-options.sh \
t/t4015-diff-whitespace.sh t/t4257-am-interactive.sh \
t/t5323-pack-redundant.sh t/t5401-update-hooks.sh \
t/t5511-refspec.sh t/t5526-fetch-submodules.sh \
t/t5529-push-errors.sh t/t5530-upload-pack-error.sh \
t/t5548-push-porcelain.sh \
t/t5552-skipping-fetch-negotiator.sh \
t/t5572-pull-submodule.sh t/t5608-clone-2gb.sh \
t/t5614-clone-submodules-shallow.sh \
t/t7508-status.sh t/t7606-merge-custom.sh \
t/t9302-fast-import-unpack-limit.sh
We excluded one set of test scripts in these commands, though: the range
of `git p4` tests. The reason? `git p4` stores the (foreign) remote
branch in the branch called `p4/master`, which is obviously not the
default branch. Manual analysis revealed that only five of these tests
actually require a specific default branch name to pass; They were
modified thusly:
$ sed -i '/^ *\. \.\/lib-git-p4\.sh$/i\
GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=master\
export GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME\
' t/t980[0167]*.sh t/t9811*.sh
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Use $ZERO_OID to make the test hash independent.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Reviewed-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The behaviour of "sparse-checkout" in the state "git clone
--no-checkout" left was changed accidentally in 2.27, which has
been corrected.
* en/sparse-checkout:
sparse-checkout: avoid staging deletions of all files
|
|
sparse-checkout's purpose is to update the working tree to have it
reflect a subset of the tracked files. As such, it shouldn't be
switching branches, making commits, downloading or uploading data, or
staging or unstaging changes. Other than updating the worktree, the
only thing sparse-checkout should touch is the SKIP_WORKTREE bit of the
index. In particular, this sets up a nice invariant: running
sparse-checkout will never change the status of any file in `git status`
(reflecting the fact that we only set the SKIP_WORKTREE bit if the file
is safe to delete, i.e. if the file is unmodified).
Traditionally, we did a _really_ bad job with this goal. The
predecessor to sparse-checkout involved manual editing of
.git/info/sparse-checkout and running `git read-tree -mu HEAD`. That
command would stage and unstage changes and overwrite dirty changes in
the working tree.
The initial implementation of the sparse-checkout command was no better;
it simply invoked `git read-tree -mu HEAD` as a subprocess and had the
same caveats, though this issue came up repeatedly in review comments
and workarounds for the problems were put in place before the feature
was merged[1, 2, 3, 4, 5, 6; especially see 4 & 6].
[1] https://lore.kernel.org/git/CABPp-BFT9A5n=_bx5LsjCvbogqwSjiwgr5amcjgbU1iAk4KLJg@mail.gmail.com/
[2] https://lore.kernel.org/git/CABPp-BEmwSwg4tgJg6nVG8a3Hpn_g-=ZjApZF4EiJO+qVgu4uw@mail.gmail.com/
[3] https://lore.kernel.org/git/CABPp-BFV7TA0qwZCQpHCqx9N+JifyRyuBQ-pZ_oGfe-NOgyh7A@mail.gmail.com/
[4] https://lore.kernel.org/git/CABPp-BHYCCD+Vx5fq35jH82eHc1-P53Lz_aGNpHJNcx9kg2K-A@mail.gmail.com/
[5] https://lore.kernel.org/git/CABPp-BF+JWYZfDqp2Tn4AEKVp4b0YMA=Mbz4Nz62D-gGgiduYQ@mail.gmail.com/
[6] https://lore.kernel.org/git/20191121163706.GV23183@szeder.dev/
However, these workarounds, in addition to disabling the feature in a
number of important cases, also missed one special case. I'll get back
to it later.
In the 2.27.0 cycle, the disabling of the feature was lifted by finally
replacing the internal equivalent of `git read-tree -mu HEAD` with
something that did what we wanted: the new update_sparsity() function in
unpack-trees.c that only ever updates SKIP_WORKTREE bits in the index
and updates the working tree to match. This new function handles all
the cases that were problematic for the old implementation, except that
it breaks the same special case that avoided the workarounds of the old
implementation, but broke it in a different way.
So...that brings us to the special case: a git clone performed with
--no-checkout. As per the meaning of the flag, --no-checkout does not
check out any branch, with the implication that you aren't on one and
need to switch to one after the clone. Implementationally, HEAD is
still set (so in some sense you are partially on a branch), but
* the index is "unborn" (non-existent)
* there are no files in the working tree (other than .git/)
* the next time git switch (or git checkout) is run it will run
unpack_trees with `initial_checkout` flag set to true.
It is not until you run, e.g. `git switch <somebranch>` that the index
will be written and files in the working tree populated.
With this special --no-checkout case, the traditional `read-tree -mu
HEAD` behavior would have done the equivalent of acting like checkout --
switch to the default branch (HEAD), write out an index that matches
HEAD, and update the working tree to match. This special case slipped
through the avoid-making-changes checks in the original sparse-checkout
command and thus continued there.
After update_sparsity() was introduced and used (see commit f56f31af03
("sparse-checkout: use new update_sparsity() function", 2020-03-27)),
the behavior for the --no-checkout case changed: Due to git's
auto-vivification of an empty in-memory index (see do_read_index() and
note that `must_exist` is false), and due to sparse-checkout's
update_working_directory() code to always write out the index after it
was done, we got a new bug. That made it so that sparse-checkout would
switch the repository from a clone with an "unborn" index (i.e. still
needing an initial_checkout), to one that had a recorded index with no
entries. Thus, instead of all the files appearing deleted in `git
status` being known to git as a special artifact of not yet being on a
branch, our recording of an empty index made it suddenly look to git as
though it was definitely on a branch with ALL files staged for deletion!
A subsequent checkout or switch then had to contend with the fact that
it wasn't on an initial_checkout but had a bunch of staged deletions.
Make sure that sparse-checkout changes nothing in the index other than
the SKIP_WORKTREE bit; in particular, when the index is unborn we do not
have any branch checked out so there is no sparsification or
de-sparsification work to do. Simply return from
update_working_directory() early.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Remove the error condition when updating the sparse-checkout leaves
an empty working directory.
This behavior was added in 9e1afb167 (sparse checkout: inhibit empty
worktree, 2009-08-20). The comment was added in a7bc906f2 (Add
explanation why we do not allow to sparse checkout to empty working
tree, 2011-09-22) in response to a "dubious" comment in 84563a624
(unpack-trees.c: cosmetic fix, 2010-12-22).
With the recent "cone mode" and "git sparse-checkout init [--cone]"
command, it is common to set a reasonable sparse-checkout pattern
set of
/*
!/*/
which matches only files at root. If the repository has no such files,
then their "git sparse-checkout init" command will fail.
Now that we expect this to be a common pattern, we should not have the
commands fail on an empty working directory. If it is a confusing
result, then the user can recover with "git sparse-checkout disable"
or "git sparse-checkout set". This is especially simple when using cone
mode.
Reported-by: Lars Schneider <larsxschneider@gmail.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If commands like merge or rebase materialize files as part of their work,
or a previous sparse-checkout command failed to update individual files
due to dirty changes, users may want a command to simply 'reapply' the
sparsity rules. Provide one.
Reviewed-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When sparse-checkout runs to update the list of sparsity patterns, it
gives warnings if it can't remove paths from the working tree because
those files have dirty changes. Add a similar warning for unmerged
paths as well.
Reviewed-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The messages for problems with sparse paths are phrased as errors that
cause the operation to abort, even though we are not making the
operation abort. Reword the messages to make sense in their new
context.
Reviewed-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
display_error_msgs() is never called to show messages of both ERROR_*
and WARNING_* types at the same time; it is instead called multiple
times, separately for each type. Since we want to display these types
differently, make two slightly different versions of this function.
A subsequent commit will further modify unpack_trees() and how it calls
the new display_warning_msgs().
Reviewed-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
setup_unpack_trees_porcelain() provides much improved error/warning
messages; instead of a message that assumes that there is only one path
with a given problem despite being used by code that intentionally is
grouping and showing errors together, it uses a message designed to be
used with groups of paths. For example, this transforms
error: Entry ' folder1/a
folder2/a
' not uptodate. Cannot update sparse checkout.
into
error: Cannot update sparse checkout: the following entries are not up to date:
folder1/a
folder2/a
In the past the suboptimal messages were never actually triggered
because we would error out if the working directory wasn't clean before
we even called unpack_trees(). The previous commit changed that,
though, so let's use the better error messages.
Reviewed-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Remove the equivalent of 'git read-tree -mu HEAD' in the sparse-checkout
codepaths for setting the SKIP_WORKTREE bits and instead use the new
update_sparsity() function.
Note that when an issue is hit, the error message splits 'error' and
'Cannot update sparse checkout' on separate lines. For now, we use two
greps to find both pieces of the error message but subsequent commits
will clean up the messages reported to the user.
Reviewed-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Reviewed-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We grep for "File exists" in stderr of the failing `git sparse-checkout`
to make sure that it failed for the right reason. We expect the string
to show up there since we call `strerror(errno)` in
`unable_to_lock_message()` in lockfile.c.
On the NonStop platform, this fails because the error string is "File
already exists", which doesn't match our grepping.
See 9042140097 ("test-dir-iterator: do not assume errno values",
2019-07-30) for a somewhat similar fix. There, we patched a test helper,
which meant we had access to `errno` and could investigate it better in
the test helper instead of just outputting the numerical value and
evaluating it in the test script. The current situation is different,
since (short of modifying the lockfile machinery, e.g., to be more
verbose) we don't have more than the output from `strerror()` available.
Except we do: We prefix `strerror(errno)` with `_("Unable to create
'%s.lock': ")`. Let's grep for that part instead. It verifies that we
were indeed unable to create the lock file. (If that fails for some
other reason than the file existing, we really really should expect
other tests to fail as well.)
An alternative fix would be to loosen the expression a bit and grep for
"File.* exists" instead. There would be no guarantee that some other
implementation couldn't come up with another error string, That is, that
could be the first move in an endless game of whack-a-mole. Of course,
it could also take us from "99" to "100" percent of the platforms and
we'd never have this problem again. But since we have another way of
addressing this, let's not even try the "loosen it up a bit" strategy.
Reported-by: Randall S. Becker <rsbecker@nexbridge.com>
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Acked-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In 9e6d3e64 (sparse-checkout: detect short patterns, 2020-01-24), a
condition on the minimum length of a cone-mode pattern was introduced.
However, this condition was off-by-one.
If we have a directory with a single character, say "b", then the
command
git sparse-checkout set b
will correctly add the pattern "/b/" to the sparse-checkout file. When
this is interpeted in dir.c, the pattern is "/b" with the
PATTERN_FLAG_MUSTBEDIR flag. This string has length two, which satisfies
our inclusive inequality (<= 2).
The reason for this inequality is that we will start to read the pattern
string character-by-character using three char pointers: prev, cur,
next. In particular, next is set to the current pattern plus two. The
mistake was that next will still be a valid pointer when the pattern
length is two, since the string is null-terminated.
Make this inequality strict so these patterns work.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When using Windows, a user may run 'git sparse-checkout set A\B\C'
to add the Unix-style path A/B/C to their sparse-checkout patterns.
Normalizing the input path converts the backslashes to slashes before we
add the string 'A/B/C' to the recursive hashset.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When using the sparse-checkout feature, a user may want to incrementally
grow their sparse-checkout pattern set. Allow adding patterns using a
new 'add' subcommand. This is not much different from the 'set'
subcommand, because we still want to allow the '--stdin' option and
interpret inputs as directories when in cone mode and patterns
otherwise.
When in cone mode, we are growing the cone. This may actually reduce the
set of patterns when adding directory A when A/B is already a directory
in the cone. Test the different cases: siblings, parents, ancestors.
When not in cone mode, we can only assume the patterns should be
appended to the sparse-checkout file.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The intention of the special "cone mode" in the sparse-checkout
feature is to always match the same patterns that are matched by the
same sparse-checkout file as when cone mode is disabled.
When a file path is given to "git sparse-checkout set" in cone mode,
then the cone mode improperly matches the file as a recursive path.
When setting the skip-worktree bits, files were not expecting the
MATCHED_RECURSIVE response, and hence these were left out of the
matched cone.
Fix this bug by checking for MATCHED_RECURSIVE in addition to MATCHED
and add a test that prevents regression.
Reported-by: Finn Bryant <finnbryant@gmail.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The sparse-checkout patterns allow special globs according to
fnmatch(3). When writing cone-mode patterns for paths containing
these characters, they must be escaped.
Use is_glob_special() to check which characters must be escaped
this way, and add a path to the tests that contains all glob
characters at once. Note that ']' is not special, since the
initial bracket '[' is escaped.
Reported-by: Jeff King <peff@peff.net>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When in cone mode, the 'git sparse-checkout list' subcommand lists
the directories included in the sparse cone. When these directories
contain odd characters, such as a backslash, then we need to use
C-style quotes similar to 'git ls-tree'.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If a user somehow creates a directory with an asterisk (*) or backslash
(\), then the "git sparse-checkout set" command will struggle to provide
the correct pattern in the sparse-checkout file. When not in cone mode,
the provided pattern is written directly into the sparse-checkout file.
However, in cone mode we expect a list of paths to directories and then
we convert those into patterns.
Even more specifically, the goal is to always allow the following from
the root of a repo:
git ls-tree --name-only -d HEAD | git sparse-checkout set --stdin
The ls-tree command provides directory names with an unescaped asterisk.
It also quotes the directories that contain an escaped backslash. We
must remove these quotes, then keep the escaped backslashes.
Use unquote_c_style() when parsing lines from stdin. Command-line
arguments will be parsed as-is, assuming the user can do the correct
level of escaping from their environment to match the exact directory
names.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If a user somehow creates a directory with an asterisk (*) or backslash
(\), then the "git sparse-checkout set" command will struggle to provide
the correct pattern in the sparse-checkout file. When not in cone mode,
the provided pattern is written directly into the sparse-checkout file.
However, in cone mode we expect a list of paths to directories and then
we convert those into patterns.
However, there is some care needed for the timing of these escapes. The
in-memory pattern list is used to update the working directory before
writing the patterns to disk. Thus, we need the command to have the
unescaped names in the hashsets for the cone comparisons, then escape
the patterns later.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In cone mode, the sparse-checkout feature uses hashset containment
queries to match paths. Make this algorithm respect escaped asterisk
(*) and backslash (\) characters.
Create dup_and_filter_pattern() method to convert a pattern by
removing escape characters and dropping an optional "/*" at the end.
This method is available in dir.h as we will use it in
builtin/sparse-checkout.c in a later change.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In cone mode, the sparse-checkout commmand will write patterns that
allow faster pattern matching. This matching only works if the patterns
in the sparse-checkout file are those written by that command. Users
can edit the sparse-checkout file and create patterns that cause the
cone mode matching to fail.
The cone mode patterns may end in "/*" but otherwise an un-escaped
asterisk or other glob character is invalid. Add checks to disable
cone mode when seeing these values.
A later change will properly handle escaped globs.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
Junio C Hamano
Elijah Newren
Derrick Stolee
Johannes Schindelin
Jonathan Tan
Eric Sunshine
SZEDER Gábor
brian m. carlson
Martin Ågren