summaryrefslogtreecommitdiff
path: root/t/t1060-object-corruption.sh
AgeCommit message (Collapse)AuthorFilesLines
2018-10-31index-pack tests: don't leave test repo dirty at endLibravatar Ævar Arnfjörð Bjarmason1-1/+3
Change a test added in 51054177b3 ("index-pack: detect local corruption in collision check", 2017-04-01) so that the repository isn't left dirty at the end. Due to the caveats explained in 720dae5a19 ("config doc: elaborate on fetch.fsckObjects security", 2018-07-27) even a "fetch" that fails will write to the local object store, so let's copy the bit-error test directory before running this test. Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-04-01index-pack: detect local corruption in collision checkLibravatar Jeff King1-0/+17
When we notice that we have a local copy of an incoming object, we compare the two objects to make sure we haven't found a collision. Before we get to the actual object bytes, though, we compare the type and size from sha1_object_info(). If our local object is corrupted, then the type will be OBJ_BAD, which obviously will not match the incoming type, and we'll report "SHA1 COLLISION FOUND" (with capital letters and everything). This is confusing, as the problem is not a collision but rather local corruption. We should report that instead (just like we do if reading the rest of the object content fails a few lines later). Note that we _could_ just ignore the error and mark it as a non-collision. That would let you "git fetch" to replace a corrupted object. But it's not a very reliable method for repairing a repository. The earlier want/have negotiation tries to get the other side to omit objects we already have, and it would not realize that we are "missing" this corrupted object. So we're better off complaining loudly when we see corruption, and letting the user take more drastic measures to repair (like making a full clone elsewhere and copying the pack into place). Note that the test sets transfer.unpackLimit in the receiving repository so that we use index-pack (which is what does the collision check). Normally for such a small push we'd use unpack-objects, which would simply try to write the loose object, and discard the new one when we see that there's already an old one. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-04-01sha1_loose_object_info: return error for corrupted objectsLibravatar Jeff King1-0/+7
When sha1_loose_object_info() finds that a loose object file cannot be stat(2)ed or mmap(2)ed, it returns -1 to signal an error to the caller. However, if it found that the loose object file is corrupt and the object data cannot be used from it, it stuffs OBJ_BAD into "type" field of the object_info, but returns zero (i.e., success), which can confuse callers. This is due to 052fe5eac (sha1_loose_object_info: make type lookup optional, 2013-07-12), which switched the return to a strict success/error, rather than returning the type (but botched the return). Callers of regular sha1_object_info() don't notice the difference, as that function returns the type (which is OBJ_BAD in this case). However, direct callers of sha1_object_info_extended() see the function return success, but without setting any meaningful values in the object_info struct, leading them to access potentially uninitialized memory. The easiest way to see the bug is via "cat-file -s", which will happily ignore the corruption and report whatever value happened to be in the "size" variable. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-03-29clone: leave repo in place after checkout errorsLibravatar Jeff King1-0/+4
If we manage to clone a remote repository but run into an error in the checkout, it is probably sane to leave the repo directory in place. That lets the user examine the situation without spending time to re-clone from the remote (which may be a lengthy process). Rather than try to convert each die() from the checkout code path into an error(), we simply set a flag that tells the "remove_junk" atexit function to print a helpful message and leave the repo in place. Note that the test added in this patch actually passes without the code change. The reason is that the cleanup code is buggy; we chdir into the working tree for the checkout, but still may use relative paths to remove the directories (which means if you cloned into "foo", we would accidentally remove "foo" from the working tree!). There's no point in fixing it now, since this patch means we will never try to remove anything after the chdir, anyway. [jc: replaced the message with a more succinct version from Jonathan] Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-03-27clone: run check_everything_connectedLibravatar Jeff King1-1/+1
When we fetch from a remote, we do a revision walk to make sure that what we received is connected to our existing history. We do not do the same check for clone, which should be able to check that we received an intact history graph. The upside of this patch is that it will make clone more resilient against propagating repository corruption. The downside is that we will now traverse "rev-list --objects --all" down to the roots, which may take some time (it is especially noticeable for a "--local --bare" clone). Note that we need to adjust t5710, which tries to make such a bogus clone. Rather than checking after the fact that our clone is bogus, we can simplify it to just make sure "git clone" reports failure. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-03-27clone: die on errors from unpack_treesLibravatar Jeff King1-1/+1
When clone is populating the working tree, it ignores the return status from unpack_trees; this means we may report a successful clone, even when the checkout fails. When checkout fails, we may want to leave the $GIT_DIR in place, as it might be possible to recover the data through further use of "git checkout" (e.g., if the checkout failed due to a transient error, disk full, etc). However, we already die on a number of other checkout-related errors, so this patch follows that pattern. In addition to marking a now-passing test, we need to adjust t5710, which blindly assumed it could make bogus clones of very deep alternates hierarchies. By using "--bare", we can avoid it actually touching any objects. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-03-27add tests for cloning corrupted repositoriesLibravatar Jeff King1-0/+41
We try not to let corruption pass unnoticed over fetches and clones. For the most part, this works, but there are some broken corner cases, including: 1. We do not detect missing objects over git-aware transports. This is a little hard to test, because the sending side will actually complain about the missing object. To fool it, we corrupt a repository such that we have a "misnamed" object: it claims to be sha1 X, but is really Y. This lets the sender blindly transmit it, but it is the receiver's responsibility to verify that what it got is sane (and it does not). 2. We do not detect missing or misnamed blobs during the checkout phase of clone. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-03-27streaming_write_entry: propagate streaming errorsLibravatar Jeff King1-0/+25
When we are streaming an index blob to disk, we store the error from stream_blob_to_fd in the "result" variable, and then immediately overwrite that with the return value of "close". That means we catch errors on close (e.g., problems committing the file to disk), but miss anything which happened before then. We can fix this by using bitwise-OR to accumulate errors in our result variable. While we're here, we can also simplify the error handling with an early return, which makes it easier to see under which circumstances we need to clean up. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-03-27add test for streaming corrupt blobsLibravatar Jeff King1-0/+34
We do not have many tests for handling corrupt objects. This new test at least checks that we detect a byte error in a corrupt blob object while streaming it out with cat-file. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>