summaryrefslogtreecommitdiff
path: root/t/t1011-read-tree-sparse-checkout.sh
AgeCommit message (Collapse)AuthorFilesLines
2020-05-04sparse-checkout: stop blocking empty workdirsLibravatar Derrick Stolee1-3/+9
Remove the error condition when updating the sparse-checkout leaves an empty working directory. This behavior was added in 9e1afb167 (sparse checkout: inhibit empty worktree, 2009-08-20). The comment was added in a7bc906f2 (Add explanation why we do not allow to sparse checkout to empty working tree, 2011-09-22) in response to a "dubious" comment in 84563a624 (unpack-trees.c: cosmetic fix, 2010-12-22). With the recent "cone mode" and "git sparse-checkout init [--cone]" command, it is common to set a reasonable sparse-checkout pattern set of /* !/*/ which matches only files at root. If the repository has no such files, then their "git sparse-checkout init" command will fail. Now that we expect this to be a common pattern, we should not have the commands fail on an empty working directory. If it is a confusing result, then the user can recover with "git sparse-checkout disable" or "git sparse-checkout set". This is especially simple when using cone mode. Reported-by: Lars Schneider <larsxschneider@gmail.com> Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-03-27unpack-trees: failure to set SKIP_WORKTREE bits always just a warningLibravatar Elijah Newren1-5/+6
Setting and clearing of the SKIP_WORKTREE bit is not only done when users run 'sparse-checkout'; other commands such as 'checkout' also run through unpack_trees() which has logic for handling this special bit. As such, we need to consider how they handle special cases. A couple comparison points should help explain the rationale for changing how unpack_trees() handles these bits: Ignoring sparse checkouts for a moment, if you are switching branches and have dirty changes, it is only considered an error that will prevent the branch switching from being successful if the dirty file happens to be one of the paths with different contents. SKIP_WORKTREE has always been considered advisory; for example, if rebase or merge need or even want to materialize a path as part of their work, they have always been allowed to do so regardless of the SKIP_WORKTREE setting. This has been used for unmerged paths, but it was often used for paths it wasn't needed just because it made the code simpler. It was a best-effort consideration, and when it materialized paths contrary to the SKIP_WORKTREE setting, it was never required to even print a warning message. In the past if you trying to run e.g. 'git checkout' and: 1) you had a path that was materialized and had some dirty changes 2) the path was listed in $GITDIR/info/sparse-checkout 3) this path did not different between the current and target branches then despite the comparison points above, the inability to set SKIP_WORKTREE was treated as a *hard* error that would abort the checkout operation. This is completely inconsistent with how SKIP_WORKTREE is handled elsewhere, and rather annoying for users as leaving the paths materialized in the working copy (with a simple warning) should present no problem at all. Downgrade any errors from inability to toggle the SKIP_WORKTREE bit to a warning and allow the operations to continue. Reviewed-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-11-27test: use test_must_be_empty F instead of test_cmp empty FLibravatar René Scharfe1-2/+1
Use test_must_be_empty instead of comparing it to an empty file. That's more efficient, as the function only needs built-in meta-data only check in the usual case, and provides nicer debug output otherwise. Helped-by: Denton Liu <liu.denton@gmail.com> Signed-off-by: René Scharfe <l.s.r@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-07-30tests: make use of the test_must_be_empty functionLibravatar Ævar Arnfjörð Bjarmason1-2/+1
Change various tests that use an idiom of the form: >expect && test_cmp expect actual To instead use: test_must_be_empty actual The test_must_be_empty() wrapper was introduced in ca8d148daf ("test: test_must_be_empty helper", 2013-06-09). Many of these tests have been added after that time. This was mostly found with, and manually pruned from: git grep '^\s+>.*expect.* &&$' t Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-03-26t1011: abstract away SHA-1-specific constantsLibravatar brian m. carlson1-3/+4
Adjust the test so that it computes the expected hash value dynamically instead of relying on a hard-coded hash. Hoist some code earlier in the test to make this possible. Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-07-25Merge branch 'nd/cache-tree-ita'Libravatar Junio C Hamano1-4/+4
"git add -N dir/file && git write-tree" produced an incorrect tree when there are other paths in the same directory that sorts after "file". * nd/cache-tree-ita: cache-tree: do not generate empty trees as a result of all i-t-a subentries cache-tree.c: fix i-t-a entry skipping directory updates sometimes test-lib.sh: introduce and use $EMPTY_BLOB test-lib.sh: introduce and use $EMPTY_TREE
2016-07-18test-lib.sh: introduce and use $EMPTY_BLOBLibravatar Nguyễn Thái Ngọc Duy1-4/+4
Similar to $EMPTY_TREE this makes it easier to recognize this special SHA-1 and change hash later. Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-07-13Merge branch 'ah/unpack-trees-advice-messages'Libravatar Junio C Hamano1-1/+1
Grammofix. * ah/unpack-trees-advice-messages: unpack-trees: fix English grammar in do-this-before-that messages
2016-06-27unpack-trees: fix English grammar in do-this-before-that messagesLibravatar Alex Henrie1-1/+1
Signed-off-by: Alex Henrie <alexhenrie24@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-06-17tests: unpack-trees: update to use test_i18n* functionsLibravatar Vasco Almeida1-1/+1
Use functions test_i18ncmp and test_i18ngrep to successfully pass tests running under GETTEXT_POISON. The output strings compared to in these test were marked for translation in ed47fdf ("i18n: unpack-trees: mark strings for translation", 2016-04-09) and later improved in 2e3926b ("i18n: unpack-trees: avoid substituting only a verb in sentences", 2016-05-12). Signed-off-by: Vasco Almeida <vascomalmeida@sapo.pt> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-04-15checkout: add --ignore-skip-worktree-bits in sparse checkout modeLibravatar Nguyễn Thái Ngọc Duy1-0/+24
"git checkout -- <paths>" is usually used to restore all modified files in <paths>. In sparse checkout mode, this command is overloaded with another meaning: to add back all files in <paths> that are excluded by sparse patterns. As the former makes more sense for day-to-day use. Switch it to the default and the latter enabled with --ignore-skip-worktree-bits. While at there, add info/sparse-checkout to gitrepository-layout.txt Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-10-13Merge branch 'nd/maint-sparse-errors'Libravatar Junio C Hamano1-0/+16
* nd/maint-sparse-errors: Add explanation why we do not allow to sparse checkout to empty working tree sparse checkout: show error messages when worktree shaping fails
2011-09-22sparse checkout: show error messages when worktree shaping failsLibravatar Nguyễn Thái Ngọc Duy1-0/+15
verify_* functions can queue errors up and to be printed later at label return_failed. In case of errors, do not go to label "done" directly because all queued messages would be dropped on the floor. Found-by: Joshua Jensen <jjensen@workspacewhiz.com> Tracked-down-by: Michael J Gruber <git@drmicha.warpmail.net> Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-05-25Teach read-tree the -n|--dry-run optionLibravatar Jens Lehmann1-13/+14
The option can be used to check if read-tree with the same set of other options like "-m" and "-u" would succeed without actually changing either the index or the working tree. The relevant tests in the t10?? range were extended to do a read-tree -n before the real read-tree to make sure neither the index nor any local files were changed with -n and the same exit code as without -n is returned. The helper functions added for that purpose reside in the new t/lib-read-tree.sh file. The only exception is #13 in t1004 ("unlinking an un-unlink-able symlink"). As this is an issue of wrong directory permissions it is not detected with -n. Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-05-10sparse checkout: do not eagerly decide the fate for whole directoryLibravatar Nguyễn Thái Ngọc Duy1-0/+41
Sparse-setting code follows closely how files are excluded in read_directory(), every entry (including directories) are fed to excluded_from_list() to decide if the entry is suitable. Directories are treated no different than files. If a directory is matched (or not), the whole directory is considered matched (or not) and the process moves on. This generally works as long as there are no patterns to exclude parts of the directory. In case of sparse checkout code, the following patterns t !t/t0000-basic.sh will produce a worktree with full directory "t" even if t0000-basic.sh is requested to stay out. By the same reasoning, if a directory is to be excluded, any rules to re-include certain files within that directory will be ignored. Fix it by always checking files against patterns. If no pattern can be used to decide whether an entry is in our out (ie. excluded_from_list() returns -1), the entry will be included/excluded the same as their parent directory. Noticed-by: <skillzero@gmail.com> Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-05-10t1011: fix sparse-checkout initialization and add new fileLibravatar Nguyễn Thái Ngọc Duy1-4/+8
Do not append to $GIT_DIR/info/sparse-checkout at each test, overwrite it instead. Also add sub/addedtoo for more complex tests later on Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-12-22Merge branch 'nd/maint-fix-add-typo-detection'Libravatar Junio C Hamano1-3/+11
* nd/maint-fix-add-typo-detection: Revert "excluded_1(): support exclude files in index" unpack-trees: fix sparse checkout's "unable to match directories" unpack-trees: move all skip-worktree checks back to unpack_trees() dir.c: add free_excludes() cache.h: realign and use (1 << x) form for CE_* constants
2010-11-30unpack-trees: fix sparse checkout's "unable to match directories"Libravatar Nguyễn Thái Ngọc Duy1-3/+11
Matching index entries against an excludes file currently has two problems. First, there's no function to do it. Code paths (like sparse checkout) that wanted to try it would iterate over index entries and for each index entry pass that path to excluded_from_list(). But that is not how excluded_from_list() works; one is supposed to feed in each ancester of a path before a given path to find out if it was excluded because of some parent or grandparent matching a bigsubdirectory/ pattern despite the path not matching any .gitignore pattern directly. Second, it's inefficient. The excludes mechanism is supposed to let us block off vast swaths of the filesystem as uninteresting; separately checking every index entry doesn't fit that model. Introduce a new function to take care of both these problems. This traverses the index in depth-first order (well, that's what order the index is in) to mark un-excluded entries. Maybe some day the in-core index format will be restructured to make this sort of operation easier. Or maybe we will want to try some binary search based thing. The interface is simple enough to allow all those things. Example: clear_ce_flags(the_index.cache, the_index.cache_nr, CE_CANDIDATE, CE_CLEARME, exclude_list); would clear the CE_CLEARME flag on all index entries with CE_CANDIDATE flag and not matched by exclude_list. Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-11-24Merge branch 'en/and-cascade-tests'Libravatar Junio C Hamano1-1/+1
* en/and-cascade-tests: (25 commits) t4124 (apply --whitespace): use test_might_fail t3404: do not use 'describe' to implement test_cmp_rev t3404 (rebase -i): introduce helper to check position of HEAD t3404 (rebase -i): move comment to description t3404 (rebase -i): unroll test_commit loops t3301 (notes): use test_expect_code for clarity t1400 (update-ref): use test_must_fail t1502 (rev-parse --parseopt): test exit code from "-h" t6022 (renaming merge): chain test commands with && test-lib: introduce test_line_count to measure files tests: add missing &&, batch 2 tests: add missing && Introduce sane_unset and use it to ensure proper && chaining t7800 (difftool): add missing && t7601 (merge-pull-config): add missing && t7001 (mv): add missing && t6016 (rev-list-graph-simplify-history): add missing && t5602 (clone-remote-exec): add missing && t4026 (color): remove unneeded and unchained command t4019 (diff-wserror): add lots of missing && ... Conflicts: t/t7006-pager.sh
2010-11-09tests: add missing &&Libravatar Jonathan Nieder1-1/+1
Breaks in a test assertion's && chain can potentially hide failures from earlier commands in the chain. Commands intended to fail should be marked with !, test_must_fail, or test_might_fail. The examples in this patch do not require that. Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-11-08dir.c: fix EXC_FLAG_MUSTBEDIR match in sparse checkoutLibravatar Nguyễn Thái Ngọc Duy1-3/+7
Commit c84de70 (excluded_1(): support exclude files in index - 2009-08-20) tries to work around the fact that there is no directory/file information in index entries, therefore EXC_FLAG_MUSTBEDIR match would fail. Unfortunately the workaround is flawed. This fixes it. Reported-by: Thomas Rinderknecht <thomasr@sailguy.org> Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-08-09unpack-trees: mark new entries skip-worktree appropriatelyLibravatar Nguyễn Thái Ngọc Duy1-1/+1
Sparse checkout narrows worktree down based on the skip-worktree bit before and after $GIT_DIR/info/sparse-checkout application. If it does not have that bit before but does after, a narrow is detected and the file will be removed from worktree. New files added by merge, however, does not have skip-worktree bit. If those files appear to be outside checkout area, the same rule applies: the file gets removed from worktree even though they don't exist in worktree. Just pretend they have skip-worktree before in that case, so the rule is ignored. Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Reviewed-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-08-09unpack-trees: let read-tree -u remove index entries outside sparse areaLibravatar Nguyễn Thái Ngọc Duy1-1/+10
To avoid touching the worktree outside a sparse checkout, when the update flag is enabled unpack_trees() clears the CE_UPDATE and CE_REMOVE flags on entries that do not match the sparse pattern before actually committing any updates to the index file or worktree. The effect on the index was unintentional; sparse checkout was never meant to prevent index updates outside the area checked out. And the result is very confusing: for example, after a failed merge, currently "git reset --hard" does not reset the state completely but an additional "git reset --mixed" will. So stop clearing the CE_REMOVE flag. Instead, maintain a CE_WT_REMOVE flag to separately track whether a particular file removal should apply to the worktree in addition to the index or not. The CE_WT_REMOVE flag is used already to mark files that should be removed because of a narrowing checkout area. That usage will still apply; do not clear the CE_WT_REMOVE flag in that case (detectable because the CE_REMOVE flag is not set). This bug masked some other bugs illustrated by the test suite, which will be addressed by later patches. Reported-by: Frédéric Brière <fbriere@fbriere.net> Fixes: http://bugs.debian.org/583699 Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Reviewed-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-08-09unpack-trees: only clear CE_UPDATE|CE_REMOVE when skip-worktree is always setLibravatar Nguyễn Thái Ngọc Duy1-0/+12
The purpose of this clearing is, as explained in comment, because verify_*() may set those bits before apply_sparse_checkout() is called. By that time, it's not clear whether an entry will stay in checkout area or out. After $GIT_DIR/info/sparse-checkout is applied, we know what entries will be in finally. It's time to clean unwanted bits. That works perfectly when checkout area remains unchanged. When checkout area changes, apply_sparse_checkout() may set CE_UPDATE or CE_WT_REMOVE to widen/narrow checkout area. Doing the clearing after apply_sparse_checkout() may clear those widening/narrowing bits unexpectedly. So, only do that on entries that are not affected by checkout area changes (i.e. skip-worktree bit does not change after apply_sparse_checkout). This code does not actually fix anything though, just future-proof. The removed code and the narrow/widen code inside apply_sparse_checkout are currently independent (narrow code never sets CE_REMOVE, widen code sets CE_UPDATE, but ce_skip_worktree() would be false). Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Reviewed-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-08-02t1011 (sparse checkout): style nitpicksLibravatar Jonathan Nieder1-47/+55
Tweak the rest of the script to more closely follow the test style guide. Guarding setup commands with test_expect_success makes it easy to see the scope in which some particular data is used; removal of whitespace after >redirection operators is just for consistency. Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-11-25tests: rename duplicate t1009Libravatar Jeff King1-0/+150
We should avoid duplicate test numbers, since things like GIT_SKIP_TESTS consider something like t1009.5 to be unambiguous. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>