| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The hash-object command uses prefix_filename() without
duplicating its return value. Since that function returns a
static buffer, the value is overwritten by subsequent calls.
This can cause incorrect results when we use --path along
with hashing a file by its relative path, both of which need
to call prefix_filename(). We overwrite the filename
computed for --path, effectively ignoring it.
We can fix this by calling xstrdup on the return value. Note
that we don't bother freeing the "vpath" instance, as it
remains valid until the program exit.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When the tree-walker runs into an error, it just calls
die(), and the message is always "corrupt tree file".
However, we are actually covering several cases here; let's
give the user a hint about what happened.
Let's also avoid using the word "corrupt", which makes it
seem like the data bit-rotted on disk. Our sha1 check would
already have found that. These errors are ones of data that
is malformed in the first place.
Signed-off-by: David Turner <dturner@twosigma.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We have a series of 3 CRLF tests that do exactly the same
(long) setup sequence. Let's pull it out into a common setup
test, which is shorter, more efficient, and will make it
easier to add new tests.
Note that we don't have to worry about cleaning up any of
the setup which was previously per-test; we call pop_repo
after the CRLF tests, which cleans up everything.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When "hash-object" is run without "-w", we don't need to be
in a git repository at all; we can just hash the object and
write its sha1 to stdout. However, if we _are_ in a git
repository, we would want to know that so we can follow the
normal rules for respecting config, .gitattributes, etc.
This happens to work at the top-level of a git repository
because we blindly read ".git/config", but as the included
test shows, it does not work when you are in a subdirectory.
The solution is to just do a "gentle" setup in this case. We
already take care to use prefix_filename() on any filename
arguments we get (to handle the "-w" case), so we don't need
to do anything extra to handle the side effects of repo
setup.
An alternative would be to specify RUN_SETUP_GENTLY for this
command in git.c, and then die if "-w" is set but we are not
in a repository. However, the error messages generated at
the time of setup_git_directory() are more detailed, so it's
better to find out which mode we are in, and then call the
appropriate function.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"hash-object --literally" introduced in v2.2 was not prepared to
take a really long object type name.
* jc/hash-object:
write_sha1_file(): do not use a separate sha1[] array
t1007: add hash-object --literally tests
hash-object --literally: fix buffer overrun with extra-long object type
git-hash-object.txt: document --literally option
|
|
git-hash-object learned a --literally option in 5ba9a93
(hash-object: add --literally option, 2014-09-11). Check that
--literally allows object creation with a bogus type, with two
type strings whose length is reasonably short and very long.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When commit fe8e3b7 refactored type_from_string to allow
input that was not NUL-terminated, it switched to using
strncmp instead of strcmp. But this means we check only the
first "len" bytes of the strings, and ignore any remaining
bytes in the object_type_string. We should make sure that it
is also "len" bytes, or else we would accept "comm" as
"commit", and so forth.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Breaks in a test assertion's && chain can potentially hide failures from
earlier commands in the chain by adding " &&" at the end of line to the
commands that need them.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Acked-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Commits, trees and tags have structure. Don't let users feed git
with malformed ones. Sooner or later git will die() when
encountering them.
Note that this patch does not check semantics. A tree that points
to non-existent objects is perfectly OK (and should be so, users
may choose to add commit first, then its associated tree for example).
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Erik Faye-Lund <kusmabite@gmail.com>
Acked-by: Junio C Hamano <gitster@pobox.com>
|
|
* maint:
Start 1.6.0.2 maintenance cycle
tests: use "git xyzzy" form (t7200 - t9001)
tests: use "git xyzzy" form (t7000 - t7199)
Fix passwd(5) ref and reflect that commit doens't use commit-tree
improve handling of sideband message display
tests: use "git xyzzy" form (t3600 - t6999)
tests: use "git xyzzy" form (t0000 - t3599)
checkout: fix message when leaving detached HEAD
clone: fix creation of explicitly named target directory
'git foo' program identifies itself without dash in die() messages
setup_git_directory(): fix move to worktree toplevel directory
update-index: fix worktree setup
Start conforming code to "git subcmd" style
read-tree: setup worktree if merge is required
grep: fix worktree setup
diff*: fix worktree setup
Conflicts:
RelNotes
t/t3900-i18n-commit.sh
t/t7003-filter-branch.sh
|
|
Converts tests between t0050-t3903.
Signed-off-by: Nanako Shiraishi <nanako3@lavabit.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The new option allows the contents to be hashed as is, ignoring any input
filter that would have been chosen by the attributes mechanism.
This option is incompatible with --path and --stdin-paths options.
Signed-off-by: Dmitry Potapov <dpotapov@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The --path option allows us to pretend as if the contents being hashed
came from the specified path, and affects which input filter is used via
the attributes mechanism. This is useful for hashing a temporary file
whose name is different from the path that is meant to have the hashed
contents.
Signed-off-by: Dmitry Potapov <dpotapov@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Because the file name given to stdin did not exist, git hash-object
fails to open it and exits with non-zero error code.
Thus the test may pass even if there is an error in argument checking.
Signed-off-by: Dmitry Potapov <dpotapov@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Miklos Vajna <vmiklos@frugalware.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This allows multiple paths to be specified on stdin.
Signed-off-by: Adam Roben <aroben@apple.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Adam Roben <aroben@apple.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This is a more appropriate location according to t/README.
Signed-off-by: Adam Roben <aroben@apple.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
Jeff King
Junio C Hamano
Eric Sunshine
Ramkumar Ramachandra
Nguyễn Thái Ngọc Duy
Erik Faye-Lund
Nanako Shiraishi
Dmitry Potapov
Miklos Vajna
Adam Roben