summaryrefslogtreecommitdiff
path: root/t/t1002-read-tree-m-u-2way.sh
AgeCommit message (Collapse)AuthorFilesLines
2021-11-01leak tests: mark a read-tree test as passing SANITIZE=leakLibravatar Ævar Arnfjörð Bjarmason1-0/+2
The "t1002-read-tree-m-u-2way.sh" test has passed under SANITIZE=leak since 04988c8d182 (unpack-trees: introduce preserve_ignored to unpack_trees_options, 2021-09-27) was combined with e5a917fcf42 (unpack-trees: don't leak memory in verify_clean_subdirectory(), 2021-10-07), but as both were in-flight at the time neither could mark it as passing. It will now be listed as running under the "GIT_TEST_PASSING_SANITIZE_LEAK=true" test mode (the "linux-leaks" CI target). Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-05-14t: switch $_x40 to $OID_REGEXLibravatar brian m. carlson1-1/+1
Switch all uses of $_x40 to $OID_REGEX so that they work correctly with larger hashes. This commit was created by using the following sed command to modify all files in the t directory except t/test-lib.sh: sed -i 's/\$_x40/$OID_REGEX/g' Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-08-15t1002: stop using sum(1)Libravatar René Scharfe1-32/+35
sum(1) is a command for calculating checksums of the contents of files. It was part of early editions of Unix ("Research Unix", 1972/1973, [1]). cksum(1) appeared in 4.4BSD (1993) as a replacement [2], and became part of POSIX.1-2008 [3]. OpenBSD 5.6 (2014) removed sum(1). We only use sum(1) in t1002 to check for changes in three files. On MinGW we use md5sum(1) instead. We could switch to the standard command cksum(1) for all platforms; MinGW comes with GNU coreutils now, which provides sum(1), cksum(1) and md5sum(1). Use our standard method for checking for file changes instead: test_cmp. It's more convenient because it shows differences nicely, it's faster on MinGW because we have a special implementation there based only on shell-internal commands, it's simpler as it allows us to avoid stripping out unnecessary entries from the checksum file using grep(1), and it's more consistent with the rest of the test suite. We already compare changed files with their expected new contents using diff(1), so we don't need to check with "test_must_fail test_cmp" if they differ from their original state. A later patch could convert the direct diff(1) calls to test_cmp as well. With all sum(1) calls gone, remove the MinGW-specific implementation from test-lib.sh as well. [1] http://minnie.tuhs.org/cgi-bin/utree.pl?file=V3/man/man1/sum.1 [2] http://minnie.tuhs.org/cgi-bin/utree.pl?file=4.4BSD/usr/share/man/cat1/cksum.0 [3] http://pubs.opengroup.org/onlinepubs/9699919799/utilities/cksum.html Signed-off-by: René Scharfe <l.s.r@web.de> Reviewed-by: Johannes Sixt <j6t@kdbg.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-03-20t: use test_might_fail for diff and grepLibravatar Jeff King1-4/+4
Some tests run diff or grep to produce an output, and then compare the output to an expected value. We know the exit code we expect these processes to have (e.g., grep yields 0 if it produced output and 1 otherwise), so it would not make the test wrong to look for it. But the difference between their output and the expected output (e.g., shown by test_cmp) is much more useful to somebody debugging the test than the test just bailing out. These tests break the &&-chain to skip the exit-code check of the process. However, we can get the same effect by using test_might_fail. Note that in some cases the test did use "|| return 1", which meant the test was not wrong, but it did fool --chain-lint. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-04-29t1002-read-tree-m-u-2way.sh: use the $( ... ) construct for command substitutionLibravatar Elia Pinto1-5/+5
The Git CodingGuidelines prefer the $(...) construct for command substitution instead of using the backquotes `...`. The backquoted form is the traditional method for command substitution, and is supported by POSIX. However, all but the simplest uses become complicated quickly. In particular, embedded command substitutions and/or the use of double quotes require careful escaping with the backslash character. The patch was generated by: for _f in $(find . -name "*.sh") do sed -i 's@`\(.*\)`@$(\1)@g' ${_f} done and then carefully proof-read. Signed-off-by: Elia Pinto <gitter.spiros@gmail.com> Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-05-25Teach read-tree the -n|--dry-run optionLibravatar Jens Lehmann1-40/+41
The option can be used to check if read-tree with the same set of other options like "-m" and "-u" would succeed without actually changing either the index or the working tree. The relevant tests in the t10?? range were extended to do a read-tree -n before the real read-tree to make sure neither the index nor any local files were changed with -n and the same exit code as without -n is returned. The helper functions added for that purpose reside in the new t/lib-read-tree.sh file. The only exception is #13 in t1004 ("unlinking an un-unlink-able symlink"). As this is an issue of wrong directory permissions it is not detected with -n. Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-10-06t100[12] (read-tree-m-2way, read_tree_m_u_2way): add missing &&Libravatar Elijah Newren1-5/+5
Also, replace "|| return 1" with "&&" in order to keep commands chained. Acked-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Reviewed-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-01-03tests: move convenience regexp to match object names to test-lib.shLibravatar Junio C Hamano1-2/+0
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-08-18t1002-read-tree-m-u-2way.sh: use 'git diff -U0' rather than 'diff -U0'Libravatar Brandon Casey1-4/+6
Some old platforms have an old diff which doesn't have the -U option. 'git diff' can be used in its place. Adjust the comparison function to strip git's additional header lines to make this possible. Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-07-23t/: Replace diff [-u|-U0] with test_cmp to allow compilation with old diffLibravatar Brandon Casey1-6/+6
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-05-24tests: do not use implicit "git diff --no-index"Libravatar Junio C Hamano1-1/+1
As a general principle, we should not use "git diff" to validate the results of what git command that is being tested has done. We would not know if we are testing the command in question, or locating a bug in the cute hack of "git diff --no-index". Rather use test_cmp for that purpose. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-07-02Rewrite "git-frotz" to "git frotz"Libravatar Junio C Hamano1-87/+87
This uses the remove-dashes target to replace "git-frotz" to "git frotz". Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-03-04Get rid of the dependency to GNU diff in the testsLibravatar Johannes Schindelin1-1/+1
Now that "git diff" handles stdin and relative paths outside the working tree correctly, we can convert all instances of "diff -u" to "git diff". This commit is really the result of $ perl -pi.bak -e 's/diff -u/git diff/' $(git grep -l "diff -u" t/) Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <junkio@cox.net> (cherry picked from commit c699a40d68215c7e44a5b26117a35c8a56fbd387)
2006-05-28t1002: use -U0 instead of --unified=0Libravatar Linus Torvalds1-10/+10
Using "-U0" is definitely more portable than using "--unified=0", so we should do that regardless. Signed-off-by: Linus Torvalds <torvalds@osdl.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-05-17read-tree -m -u: do not overwrite or remove untracked working tree files.Libravatar Junio C Hamano1-23/+43
When a merge results in a creation of a path that did not exist in HEAD, and if you already have that path on the working tree, because the index has not been told about the working tree file, read-tree happily removes it. The issue was brought up by Santi Béjar on the list. Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-04-22Libify diff-files.Libravatar Junio C Hamano1-1/+1
This is the first installment to libify diff brothers. The updated diff-files uses revision.c::setup_revisions() infrastructure to parse its command line arguments, which means the pathname arguments are checked more strictly than before. The tests are adjusted to separate possibly missing paths from the rest of arguments with double-dashes, to show the kosher way. As Linus pointed out, renaming diff.c to diff-lib.c was simply stupid, so I am renaming it back. The new diff-lib.c is to contain pieces extracted from diff brothers. Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-09-07Big tool rename.Libravatar Junio C Hamano1-23/+23
As promised, this is the "big tool rename" patch. The primary differences since 0.99.6 are: (1) git-*-script are no more. The commands installed do not have any such suffix so users do not have to remember if something is implemented as a shell script or not. (2) Many command names with 'cache' in them are renamed with 'index' if that is what they mean. There are backward compatibility symblic links so that you and Porcelains can keep using the old names, but the backward compatibility support is expected to be removed in the near future. Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-08-11[PATCH] Trapping exit in tests, using return for errorsLibravatar Pavel Roskin1-4/+4
I have noticed that "make test" fails without any explanations when the "merge" utility is missing. I don't think tests should be silent in case of failure. It turned out that the particular test was using "exit" to interrupt the test in case of an error. This caused the whole test script to exit. No further tests would be run even if "--immediate" wasn't specified. No error message was printed. This patch does following: All instances of "exit", "exit 1" and "(exit 1)" in tests have been replaced with "return 1". In fact, "(exit 1)" had no effect. File descriptor 5 is duplicated from file descriptor 1. This is needed to print important error messages from tests. New function test_run_() has been introduced. Any "return" in the test would merely cause that function to return without skipping calls to test_failure_() and test_ok_(). The new function also traps "exit" and treats it like a fatal error (in case somebody reintroduces "exit" in the tests). test_expect_failure() and test_expect_success() check both the result of eval and the return value of test_run_(). If the later is not 0, it's always a failure because it indicates the the test didn't complete. Signed-off-by: Pavel Roskin <proski@gnu.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-06-27[PATCH] replace sha1sum with sum in t/t1002Libravatar Mark Allen1-15/+32
This replaces sha1sum(1) with sum(1) in t/t1002. GNU sum(1) runs in "BSD compatibility" mode by default, and not all systems have GNU coreutils. On any system without GNU coreutils (or sha1sum) t1002 will fail. This patch should make t1002 complete successfully everywhere that sum(1) runs. I've tested this on Darwin and Linux; it works on both platforms. Signed-off-by: Mark Allen <mrallen1@yahoo.com> Acked-by: Junio C Hamano <junkio@cox.net> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-08[PATCH] Tests: read-tree -m test updates.Libravatar Junio C Hamano1-2/+2
This updates t1000 (basic 3-way merge test) to check the merge results for both successful cases (earlier one checked the result for only one of them). Also fixes typos in t1002 that broke '&&' chain, potentially missing a test failure before the chain got broken. Signed-off-by: Junio C Hamano <junkio@cox.net> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-07[PATCH] read-tree: save more user hassles during fast-forward.Libravatar Junio C Hamano1-0/+307
This implements the "never lose the current cache information or the work tree state, but favor a successful merge over merge failure" principle in the fast-forward two-tree merge operation. It comes with a set of tests to cover all the cases described in the case matrix found in the new documentation. Signed-off-by: Junio C Hamano <junkio@cox.net> Signed-off-by: Linus Torvalds <torvalds@osdl.org>