summaryrefslogtreecommitdiff
path: root/t/t0201-gettext-fallbacks.sh
AgeCommit message (Collapse)AuthorFilesLines
2021-11-01leak tests: mark most gettext tests as passing with SANITIZE=leakLibravatar Ævar Arnfjörð Bjarmason1-0/+1
Mark all but one tests that match "*gettext*" as passing when git is compiled with SANITIZE=leak. They'll now be listed as running under the "GIT_TEST_PASSING_SANITIZE_LEAK=true" test mode (the "linux-leaks" CI target). In the case of "t0202-gettext-perl.sh" this isn't very meaningful as most of the work is on the Perl side, but let's mark it anyway. Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2021-02-10tests: remove most uses of test_i18ncmpLibravatar Ævar Arnfjörð Bjarmason1-7/+7
As a follow-up to d162b25f956 (tests: remove support for GIT_TEST_GETTEXT_POISON, 2021-01-20) remove most uses of test_i18ncmp via a simple s/test_i18ncmp/test_cmp/g search-replacement. I'm leaving t6300-for-each-ref.sh out due to a conflict with in-flight changes between "master" and "seen", as well as the prerequisite itself due to other changes between "master" and "next/seen" which add new test_i18ncmp uses. Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2021-02-10tests: remove most uses of C_LOCALE_OUTPUTLibravatar Ævar Arnfjörð Bjarmason1-1/+1
As a follow-up to d162b25f956 (tests: remove support for GIT_TEST_GETTEXT_POISON, 2021-01-20) remove those uses of the now always true C_LOCALE_OUTPUT prerequisite from those tests which declare it as an argument to test_expect_{success,failure}. Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-03-20t: fix trivial &&-chain breakageLibravatar Jeff King1-2/+2
These are tests which are missing a link in their &&-chain, but during a setup phase. We may fail to notice failure in commands that build the test environment, but these are typically not expected to fail at all (but it's still good to double-check that our test environment is what we expect). Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-03-20t: fix moderate &&-chain breakageLibravatar Jeff King1-2/+2
These are tests which are missing a link in their &&-chain, but in a way that probably does not effect the outcome of the test. Most of these are of the form: some_cmd >actual test_cmp expect actual The main point of the test is to verify the output, and a failure in some_cmd would probably be noticed by bogus output. But it is good for the tests to also confirm that "some_cmd" does not die unexpectedly after producing its output. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-07-25i18n: rebase: mark messages for translationLibravatar Jiang Xin1-4/+4
Mark messages in git-rebase.sh for translation. While doing this Jonathan noticed that the comma usage and sentence structure of the resolvemsg was not quite right, so correct that and its cousins in git-am.sh and t/t0201-gettext-fallbacks.sh at the same time. Some tests would start to fail with GETTEXT_POISON turned on after this update. Use test_i18ncmp and test_i18ngrep where appropriate to mark strings that should only be checked in the C locale output to avoid such issues. Signed-off-by: Jiang Xin <worldhello.net@gmail.com> Reviewed-by: Stefano Lattarini <stefano.lattarini@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-12-05i18n: add infrastructure for translating Git with gettextLibravatar Ævar Arnfjörð Bjarmason1-2/+18
Change the skeleton implementation of i18n in Git to one that can show localized strings to users for our C, Shell and Perl programs using either GNU libintl or the Solaris gettext implementation. This new internationalization support is enabled by default. If gettext isn't available, or if Git is compiled with NO_GETTEXT=YesPlease, Git falls back on its current behavior of showing interface messages in English. When using the autoconf script we'll auto-detect if the gettext libraries are installed and act appropriately. This change is somewhat large because as well as adding a C, Shell and Perl i18n interface we're adding a lot of tests for them, and for those tests to work we need a skeleton PO file to actually test translations. A minimal Icelandic translation is included for this purpose. Icelandic includes multi-byte characters which makes it easy to test various edge cases, and it's a language I happen to understand. The rest of the commit message goes into detail about various sub-parts of this commit. = Installation Gettext .mo files will be installed and looked for in the standard $(prefix)/share/locale path. GIT_TEXTDOMAINDIR can also be set to override that, but that's only intended to be used to test Git itself. = Perl Perl code that's to be localized should use the new Git::I18n module. It imports a __ function into the caller's package by default. Instead of using the high level Locale::TextDomain interface I've opted to use the low-level (equivalent to the C interface) Locale::Messages module, which Locale::TextDomain itself uses. Locale::TextDomain does a lot of redundant work we don't need, and some of it would potentially introduce bugs. It tries to set the $TEXTDOMAIN based on package of the caller, and has its own hardcoded paths where it'll search for messages. I found it easier just to completely avoid it rather than try to circumvent its behavior. In any case, this is an issue wholly internal Git::I18N. Its guts can be changed later if that's deemed necessary. See <AANLkTilYD_NyIZMyj9dHtVk-ylVBfvyxpCC7982LWnVd@mail.gmail.com> for a further elaboration on this topic. = Shell Shell code that's to be localized should use the git-sh-i18n library. It's basically just a wrapper for the system's gettext.sh. If gettext.sh isn't available we'll fall back on gettext(1) if it's available. The latter is available without the former on Solaris, which has its own non-GNU gettext implementation. We also need to emulate eval_gettext() there. If neither are present we'll use a dumb printf(1) fall-through wrapper. = About libcharset.h and langinfo.h We use libcharset to query the character set of the current locale if it's available. I.e. we'll use it instead of nl_langinfo if HAVE_LIBCHARSET_H is set. The GNU gettext manual recommends using langinfo.h's nl_langinfo(CODESET) to acquire the current character set, but on systems that have libcharset.h's locale_charset() using the latter is either saner, or the only option on those systems. GNU and Solaris have a nl_langinfo(CODESET), FreeBSD can use either, but MinGW and some others need to use libcharset.h's locale_charset() instead. =Credits This patch is based on work by Jeff Epler <jepler@unpythonic.net> who did the initial Makefile / C work, and a lot of comments from the Git mailing list, including Jonathan Nieder, Jakub Narebski, Johannes Sixt, Erik Faye-Lund, Peter Krefting, Junio C Hamano, Thomas Rast and others. [jc: squashed a small Makefile fix from Ramsay] Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-05-14git-sh-i18n--envsubst: our own envsubst(1) for eval_gettext()Libravatar Ævar Arnfjörð Bjarmason1-0/+51
Add a git-sh-i18n--envsubst program which is a stripped-down version of the GNU envsubst(1) program that comes with GNU gettext for use in the eval_gettext() fallback. We need a C helper program because implementing eval_gettext() purely in shell turned out to be unworkable. Digging through the Git mailing list archives will reveal two shell implementations of eval_gettext that are almost good enough, but fail on an edge case which is tested for in the tests which are part of this patch. These are the modifications I made to envsubst.c as I turned it into sh-i18n--envsubst.c: * Added our git-compat-util.h header for xrealloc() and friends. * Removed inclusion of gettext-specific headers. * Removed most of main() and replaced it with my own. The modified version only does option parsing for --variables. That's all it needs. * Modified error() invocations to use our error() instead of error(3). * Replaced the gettext XNMALLOC(n, size) macro with just xmalloc(n). Since XNMALLOC() only allocated char's. * Removed the string_list_destroy function. It's redundant (also in the upstream code). * Replaced the use of stdbool.h (a C99 header) by doing the following replacements on the code: * s/bool/unsigned short int/g * s/true/1/g * s/false/0/g Reported-by: Johannes Sixt <j.sixt@viscovery.net> Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>