| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Mark various existing tests in t00*.sh that invoke a "test-tool" with
as passing when git is compiled with SANITIZE=leak.
They'll now be listed as running under the
"GIT_TEST_PASSING_SANITIZE_LEAK=true" test mode (the "linux-leaks" CI
target).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
By default, CreateProcess() does not inherit any open file handles,
unless the bInheritHandles parameter is set to TRUE. Which we do need to
set because we need to pass in stdin/stdout/stderr to talk to the child
processes. Sadly, this means that all file handles (unless marked via
O_NOINHERIT) are inherited.
This lead to problems in VFS for Git, where a long-running read-object
hook is used to hydrate missing objects, and depending on the
circumstances, might only be called *after* Git opened a file handle.
Ideally, we would not open files without O_NOINHERIT unless *really*
necessary (i.e. when we want to pass the opened file handle as standard
handle into a child process), but apparently it is all-too-easy to
introduce incorrect open() calls: this happened, and prevented updating
a file after the read-object hook was started because the hook still
held a handle on said file.
Happily, there is a solution: as described in the "Old New Thing"
https://blogs.msdn.microsoft.com/oldnewthing/20111216-00/?p=8873 there
is a way, starting with Windows Vista, that lets us define precisely
which handles should be inherited by the child process.
And since we bumped the minimum Windows version for use with Git for
Windows to Vista with v2.10.1 (i.e. a *long* time ago), we can use this
method. So let's do exactly that.
We need to make sure that the list of handles to inherit does not
contain duplicates; Otherwise CreateProcessW() would fail with
ERROR_INVALID_ARGUMENT.
While at it, stop setting errno to ENOENT unless it really is the
correct value.
Also, fall back to not limiting handle inheritance under certain error
conditions (e.g. on Windows 7, which is a lot stricter in what handles
you can specify to limit to).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When spawning child processes, we really should be careful which file
handles we let them inherit.
This is doubly important on Windows, where we cannot rename, delete, or
modify files if there is still a file handle open.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The test was originally designed for the case where user reported
that setting GIT_SSH to a .bat file with spaces in path fails on
Windows: https://github.com/git-for-windows/git/issues/692
The test has two different problems:
1. It succeeds with AND without fix eb7c7863 that addressed user's
problem. This happens because the core problem was misunderstood,
leading to conclusion that git is unable to start any programs with
spaces in path on Win7. But in fact
a) Bug only affected cmd.exe scripts, such as .bat scripts
b) Bug only happened when cmd.exe received at least two quoted args
c) Bug happened on any Windows (verified on Win10).
Therefore, correct test must involve .bat script and two quoted args.
2. In Visual Studio build, it fails to run, because 'test-fake-ssh.exe'
is copied away from its dependencies 'libiconv.dll' and 'zlib1.dll'.
Fix both problems by using .bat script instead of 'test-fake-ssh.exe'.
NOTE: With this change, the test now correctly fails without eb7c7863.
Signed-off-by: Alexandr Miloslavskiy <alexandr.miloslavskiy@syntevo.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
On some older Windows versions (e.g. Windows 7), the CreateProcessW()
function does not really support spaces in its first argument,
lpApplicationName. But it supports passing NULL as lpApplicationName,
which makes it figure out the application from the (possibly quoted)
first argument of lpCommandLine.
Let's use that trick (if we are certain that the first argument matches
the executable's path) to support launching programs whose path contains
spaces.
We will abuse the test-fake-ssh.exe helper to verify that this works and
does not regress.
This fixes https://github.com/git-for-windows/git/issues/692
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Prepare to run test suite on Azure Pipeline.
* js/vsts-ci: (22 commits)
test-date: drop unused parameter to getnanos()
ci: parallelize testing on Windows
ci: speed up Windows phase
tests: optionally skip bin-wrappers/
t0061: workaround issues with --with-dashes and RUNTIME_PREFIX
tests: add t/helper/ to the PATH with --with-dashes
mingw: try to work around issues with the test cleanup
tests: include detailed trace logs with --write-junit-xml upon failure
tests: avoid calling Perl just to determine file sizes
README: add a build badge (status of the Azure Pipelines build)
mingw: be more generous when wrapping up the setitimer() emulation
ci: use git-sdk-64-minimal build artifact
ci: add a Windows job to the Azure Pipelines definition
Add a build definition for Azure DevOps
ci/lib.sh: add support for Azure Pipelines
tests: optionally write results as JUnit-style .xml
test-date: add a subcommand to measure times in shell scripts
ci: use a junction on Windows instead of a symlink
ci: inherit --jobs via MAKEFLAGS in run-build-and-tests
ci/lib.sh: encapsulate Travis-specific things
...
|
|
When building Git with RUNTIME_PREFIX and starting a test helper from
t/helper/, it fails to detect a system prefix. The reason is that the
RUNTIME_PREFIX feature wants to use the location of the Git executable
to determine where the support files can be found, e.g. system-wide Git
config or the translations. This does not make any sense for the test
helpers, though, as they are distinctly not in a directory structure
resembling the final installation location of Git.
That is the reason why the test helpers rely on environment variables to
indicate the location of the needed support files, e.g.
GIT_TEXTDOMAINDIR. If this information is missing, the output will
contain warnings like this one:
RUNTIME_PREFIX requested, but prefix computation failed. [...]
In t0061, we did not expect that to happen, and it actually does not
happen in the regular case, because bin-wrappers/test-tool specifically
sets GIT_TEXTDOMAINDIR (and as a consequence, nothing in test-tool needs
to know anything about any runtime prefix).
However, with --with-dashes, bin-wrappers/test-tool is no longer called,
but t/helper/test-tool is called directly instead.
So let's just ignore the RUNTIME_PREFIX warning.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The MSYS2 runtime does its best to emulate the command-line wildcard
expansion and de-quoting which would be performed by the calling Unix
shell on Unix systems.
Those Unix shell quoting rules differ from the quoting rules applying to
Windows' cmd and Powershell, making it a little awkward to quote
command-line parameters properly when spawning other processes.
In particular, git.exe passes arguments to subprocesses that are *not*
intended to be interpreted as wildcards, and if they contain
backslashes, those are not to be interpreted as escape characters, e.g.
when passing Windows paths.
Note: this is only a problem when calling MSYS2 executables, not when
calling MINGW executables such as git.exe. However, we do call MSYS2
executables frequently, most notably when setting the use_shell flag in
the child_process structure.
There is no elegant way to determine whether the .exe file to be
executed is an MSYS2 program or a MINGW one. But since the use case of
passing a command line through the shell is so prevalent, we need to
work around this issue at least when executing sh.exe.
Let's introduce an ugly, hard-coded test whether argv[0] is "sh", and
whether it refers to the MSYS2 Bash, to determine whether we need to
quote the arguments differently than usual.
That still does not fix the issue completely, but at least it is
something.
Incidentally, this also fixes the problem where `git clone \\server\repo`
failed due to incorrect handling of the backslashes when handing the path
to the git-upload-pack process.
Further, we need to take care to quote not only whitespace and
backslashes, but also curly brackets. As aliases frequently go through
the MSYS2 Bash, and as aliases frequently get parameters such as
HEAD@{yesterday}, this is really important. As an early version of this
patch broke this, let's make sure that this does not regress by adding a
test case for that.
Helped-by: Kim Gybels <kgybels@infogroep.be>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Test update.
* hb/t0061-dot-in-path-fix:
t0061: do not fail test if '.' is part of $PATH
|
|
A recent update accidentally squelched an error message when the
run_command API failed to run a missing command, which has been
corrected.
* jc/run-command-report-exec-failure-fix:
run-command: report exec failure
|
|
In 321fd823 ("run-command: mark path lookup errors with ENOENT",
2018-10-24), we rewrote the logic to execute a command by looking
in the directories on $PATH; as a side effect, a request to run a
command that is not found on $PATH is noticed even before a child
process is forked to execute it.
We however stopped to report an exec failure in such a case by
mistake. Add a logic to report the error unless silent-exec-failure
is requested, to match the original code.
Reported-by: John Passaro <john.a.passaro@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
t0061 creates a script with an unlikely name in the current
directory and asks the run_command() API to run it without an
explicit path, expecting that the script does *not* get run. This
obviously would not work if the $PATH does contain such an element.
Check if the running shell picks up the script without an explicit
path to it, and skip the test when it does, as the run_command() API
should also run the script in such an (insane) environment.
Reported-by: "H.Merijn Brand" <h.m.brand@xs4all.nl>
Helped-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The implementation of run_command() API on the UNIX platforms had a
bug that caused a command not on $PATH to be found in the current
directory.
* jk/run-command-notdot:
run-command: mark path lookup errors with ENOENT
|
|
|
|
Since commit e3a434468f (run-command: use the
async-signal-safe execv instead of execvp, 2017-04-19),
prepare_cmd() does its own PATH lookup for any commands we
run (on non-Windows platforms).
However, its logic does not match the old execvp call when
we fail to find a matching entry in the PATH. Instead of
feeding the name directly to execv, execvp would consider
that an ENOENT error. By continuing and passing the name
directly to execv, we effectively behave as if "." was
included at the end of the PATH. This can have confusing and
even dangerous results.
The fix itself is pretty straight-forward. There's a new
test in t0061 to cover this explicitly, and I've also added
a duplicate of the ENOENT test to ensure that we return the
correct errno for this case.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Using 'test_must_be_empty' is shorter and more idiomatic than
>empty &&
test_cmp empty out
as it saves the creation of an empty file. Furthermore, sometimes the
expected empty file doesn't have such a descriptive name like 'empty',
and its creation is far away from the place where it's finally used
for comparison (e.g. in 't7600-merge.sh', where two expected empty
files are created in the 'setup' test, but are used only about 500
lines later).
These cases were found by instrumenting 'test_cmp' to error out the
test script when it's used to compare empty files, and then converted
manually.
Note that even after this patch there still remain a lot of cases
where we use 'test_cmp' to check empty files:
- Sometimes the expected output is not hard-coded in the test, but
'test_cmp' is used to ensure that two similar git commands produce
the same output, and that output happens to be empty, e.g. the
test 'submodule update --merge - ignores --merge for new
submodules' in 't7406-submodule-update.sh'.
- Repetitive common tasks, including preparing the expected results
and running 'test_cmp', are often extracted into a helper
function, and some of this helper's callsites expect no output.
- For the same reason as above, the whole 'test_expect_success'
block is within a helper function, e.g. in 't3070-wildmatch.sh'.
- Or 'test_cmp' is invoked in a loop, e.g. the test 'cvs update
(-p)' in 't9400-git-cvsserver-server.sh'.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Enable Git to resolve its own binary location using a variety of
OS-specific and generic methods, including:
- procfs via "/proc/self/exe" (Linux)
- _NSGetExecutablePath (Darwin)
- KERN_PROC_PATHNAME sysctl on BSDs.
- argv0, if absolute (all, including Windows).
This is used to enable RUNTIME_PREFIX support for non-Windows systems,
notably Linux and Darwin. When configured with RUNTIME_PREFIX, Git will
do a best-effort resolution of its executable path and automatically use
this as its "exec_path" for relative helper and data lookups, unless
explicitly overridden.
Small incidental formatting cleanup of "exec_cmd.c".
Signed-off-by: Dan Jacques <dnj@google.com>
Thanks-to: Robbie Iannucci <iannucci@google.com>
Thanks-to: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Occasionally submodule code could execute new commands with GIT_DIR set
to some submodule. GIT_TRACE prints just the command line which makes it
hard to tell that it's not really executed on this repository.
Print the env delta (compared to parent environment) in this case.
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In some situations run-command will incorrectly try (and fail) to
execute a directory instead of an executable file. This was observed by
having a directory called "ssh" in $PATH before the real ssh and trying
to use ssh protoccol, reslting in the following:
$ git ls-remote ssh://url
fatal: cannot exec 'ssh': Permission denied
It ends up being worse and run-command will even try to execute a
non-executable file if it preceeds the executable version of a file on
the PATH. For example, if PATH=~/bin1:~/bin2:~/bin3 and there exists a
directory 'git-hello' in 'bin1', a non-executable file 'git-hello' in
bin2 and an executable file 'git-hello' (which prints "Hello World!") in
bin3 the following will occur:
$ git hello
fatal: cannot exec 'git-hello': Permission denied
This is due to only checking 'access()' when locating an executable in
PATH, which doesn't distinguish between files and directories. Instead
use 'is_executable()' which check that the path is to a regular,
executable file. Now run-command won't try to execute the directory or
non-executable file 'git-hello':
$ git hello
Hello World!
which matches what execvp(3) would have done when asked to execute
git-hello with such a $PATH.
Reported-by: Brian Hatfield <bhatfield@google.com>
Signed-off-by: Brandon Williams <bmwill@google.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add a test to 't0061-run-command.sh' to ensure that run_command can
continue to execute scripts which don't include a '#!' line.
As shell scripts are not natively executable on Windows, we use a
workaround to check "#!" when running scripts from Git. As this
test requires the platform (not with Git's help) to run scripts
without "#!", skipt it on Windows.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This allows to run external commands in parallel with ordered output
on stderr.
If we run external commands in parallel we cannot pipe the output directly
to the our stdout/err as it would mix up. So each process's output will
flow through a pipe, which we buffer. One subprocess can be directly
piped to out stdout/err for a low latency feedback to the user.
Example:
Let's assume we have 5 submodules A,B,C,D,E and each fetch takes a
different amount of time as the different submodules vary in size, then
the output of fetches in sequential order might look like this:
time -->
output: |---A---| |-B-| |-------C-------| |-D-| |-E-|
When we schedule these submodules into maximal two parallel processes,
a schedule and sample output over time may look like this:
process 1: |---A---| |-D-| |-E-|
process 2: |-B-| |-------C-------|
output: |---A---|B|---C-------|DE
So A will be perceived as it would run normally in the single child
version. As B has finished by the time A is done, we can dump its whole
progress buffer on stderr, such that it looks like it finished in no
time. Once that is done, C is determined to be the visible child and
its progress will be reported in real time.
So this way of output is really good for human consumption, as it only
changes the timing, not the actual output.
For machine consumption the output needs to be prepared in the tasks,
by either having a prefix per line or per block to indicate whose tasks
output is displayed, because the output order may not follow the
original sequential ordering:
|----A----| |--B--| |-C-|
will be scheduled to be all parallel:
process 1: |----A----|
process 2: |--B--|
process 3: |-C-|
output: |----A----|CB
This happens because C finished before B did, so it will be queued for
output before B.
To detect when a child has finished executing, we check interleaved
with other actions (such as checking the liveliness of children or
starting new processes) whether the stderr pipe still exists. Once a
child closed its stderr stream, we assume it is terminating very soon,
and use `finish_command()` from the single external process execution
interface to collect the exit status.
By maintaining the strong assumption of stderr being open until the
very end of a child process, we can avoid other hassle such as an
implementation using `waitpid(-1)`, which is not implemented in Windows.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
POSIXPERM requires that a later call to stat(2) (hence "ls -l")
faithfully reproduces what an earlier chmod(2) did. Some
filesystems cannot satisify this.
SANITY requires that a file or a directory is indeed accessible (or
inaccessible) when its permission bits would say it ought to be
accessible (or inaccessible). Running tests as root would lose this
prerequisite for obvious reasons.
Fix a few tests that misuse POSIXPERM.
t0061-run-command.sh has two uses of POSIXPERM.
- One checks that an attempt to execute a file that is marked as
unexecutable results in a failure with EACCES; I do not think
having root-ness or any other capability that busts the
filesystem permission mode bits will make you run an unexecutable
file, so this should be left as-is. The test does not have
anything to do with SANITY.
- The other one expects 'git nitfol' runs the alias when an
alias.nitfol is defined and a directory on the PATH is marked as
unreadable and unsearchable. I _think_ the test tries to reject
the alternative expectation that we want to refuse to run the
alias because it would break "no alias may mask a command" rule
if a file 'git-nitfol' exists in the unreadable directory but we
cannot even determine if that is the case. Under !SANITY that
busts the permission bits, this test no longer checks that, so it
must be protected with SANITY.
t1509-root-worktree.sh expects to be run on a / that is writable by
the user and sees if Git behaves "sensibly" when /.git is the
repository to govern a worktree that is the whole filesystem, and
also if Git behaves "sensibly" when / itself is a bare repository
with refs, objects, and friends (I find the definition of "behaves
sensibly" under these conditions hard to fathom, but it is a
different matter).
The implementation of the test is very much problematic.
- It requires POSIXPERM, but it does not do chmod or checks modes
in any way.
- It runs "rm /*" and "rm -fr /refs /objects ..." in one of the
tests, and also does "cd / && git init --bare". If done on a
live system that takes advantages of the "feature" being tested,
these obviously will clobber the system. But there is no guard
against such a breakage.
- It uses "test $UID = 0" to see rootness, which now should be
spelled "! test_have_prereq NOT_ROOT"
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When execvp reports EACCES, it can be one of two things:
1. We found a file to execute, but did not have
permissions to do so.
2. We did not have permissions to look in some directory
in the $PATH.
In the former case, we want to consider this a
permissions problem and report it to the user as such (since
getting this for something like "git foo" is likely a
configuration error).
In the latter case, there is a good chance that the
inaccessible directory does not contain anything of
interest. Reporting "permission denied" is confusing to the
user (and prevents our usual "did you mean...?" lookup). It
also prevents git from trying alias lookup, since we do so
only when an external command does not exist (not when it
exists but has an error).
This patch detects EACCES from execvp, checks whether we are
in case (2), and if so converts errno to ENOENT. This
behavior matches that of "bash" (but not of simpler shells
that use execvp more directly, like "dash").
Test stolen from Junio.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In git versions starting at v1.7.5-rc0~29^2 until v1.7.5-rc3~2 (Revert
"run-command: prettify -D_FORTIFY_SOURCE workaround", 2011-04-18)
fixed it, the run_command facility would write a truncated error
message when the command is present but cannot be executed for some
other reason. For example, if I add a 'hello' command to git:
$ echo 'echo hello' >git-hello
$ chmod +x git-hello
$ PATH=.:$PATH git hello
hello
and make it non-executable, this is what I normally get:
$ chmod -x git-hello
$ git hello
fatal: cannot exec 'git-hello': Permission denied
But with the problematic versions, we get disturbing output:
$ PATH=.:$PATH git hello
fatal: $
Add some tests to make sure it doesn't happen again.
The hello-script used in these tests uses cat instead of echo because
on Windows the bash spawned by git converts LF to CRLF in text written
by echo while the bash running tests does not, causing the test to
fail if "echo" is used. Thanks to Hannes for noticing.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Improved-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Previously, failures during execvp could be detected only by
finish_command. However, in some situations it is beneficial for the
parent process to know earlier that the child process will not run.
The idea to use a pipe to signal failures to the parent process and
the test case were lifted from patches by Ilari Liusvaara.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
Ævar Arnfjörð Bjarmason
Johannes Schindelin
Alexandr Miloslavskiy
Junio C Hamano
Jeff King
SZEDER Gábor
Dan Jacques
Nguyễn Thái Ngọc Duy
Brandon Williams
Stefan Beller
Jonathan Nieder
Johannes Sixt