| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
core.excludesfile (defaulting to $XDG_HOME/git/ignore) is supposed
to be overridden by repository-specific .git/info/exclude file, but
the order was swapped from the beginning. This belatedly fixes it.
* jc/gitignore-precedence:
ignore: info/exclude should trump core.excludesfile
|
|
$GIT_DIR/info/exclude and core.excludesfile (which falls back to
$XDG_HOME/git/ignore) are both ways to override the ignore pattern
lists given by the project in .gitignore files. The former, which
is per-repository personal preference, should take precedence over
the latter, which is a personal preference default across different
repositories that are accessed from that machine. The existing
documentation also agrees.
However, the precedence order was screwed up between these two from
the very beginning when 896bdfa2 (add: Support specifying an
excludes file with a configuration variable, 2007-02-27) introduced
core.excludesfile variable.
Noticed-by: Yohei Endo <yoheie@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Support for Back when bdccd3c1 (test-lib: allow negation of
prerequisites, 2012-11-14) introduced negated predicates
(e.g. "!MINGW,!CYGWIN"), we already had 5 test files that use
NOT_MINGW (and a few MINGW) as prerequisites.
Let's not add NOT_FOO and rewrite existing ones as !FOO for both
MINGW and CYGWIN.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The original used to pass with /bin/dash but not with /bin/bash set
to $SHELL_PATH. The former turns "\\" into "\", but the latter does
not.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Discard the unnecessary 'nr_spaces' variable, remove 'strlen()' and
improve the 'if' structure. Switch to pointers instead of integers
to control the loop.
Slightly more rare occurrences of 'text \ ' with a backslash
in between spaces are handled correctly. Namely, the code in
7e2e4b37 (dir: ignore trailing spaces in exclude patterns, 2014-02-09)
does not reset 'last_space' when a backslash is encountered and the above
line stays intact as a result.
Add a test at the end of t/t0008-ignores.sh to exhibit this behavior.
Signed-off-by: Pasha Bolokhov <pasha.bolokhov@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The Windows API does not preserve file names with trailing spaces (and
dots), but rather strips them. Our tools (MSYS bash, git) base the POSIX
emulation on the Windows API. As a consequence, it is impossible for bash
on Windows to allocate a file whose name has trailing spaces, and for git
to stat such a file. Both operate on a file whose name has the spaces
stripped. Skip the test that needs such a file name.
Note that we do not use (another incarnation of) prerequisite FUNNYNAMES.
The reason is that FUNNYNAMES is intended to represent a property of the
file system. But the inability to have trailing spaces in a file name is
a property of the Windows API. The file system (NTFS) does not have this
limitation.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Solaris' tr (both /usr/bin/ and /usr/xpg4/bin) uses the System V
semantics for tr whereby string1's length is truncated to the length
of string2 if string2 is shorter. The BSD semantics, as used by GNU tr
see string2 padded to the length of string1 using the final character
in string2. POSIX explicitly doesn't specify the correct behavior
here, making both equally valid.
This difference means that Solaris' native tr implementations produce
different results for tr ":\t\n" "\0" than GNU tr. This breaks a few
tests in t0008-ignores.sh.
Possible fixes for this are to make string2 be "\0\0\0" or "[\0*]".
Instead, use perl to perform these transliterations which means we
don't need to worry about the difference at all. Since we're replacing
tr with perl, we also use perl to replace the sed invocations used to
transform the files.
Replace four identical transforms with a function named
broken_c_unquote. Replace the other two identical transforms with a
fuction named broken_c_unquote_verbose.
Signed-off-by: Ben Walton <bdwalton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git check-ignore" follows the same rule as "git add" and "git
status" in that the ignore/exclude mechanism does not take effect
on paths that are already tracked. With "--no-index" option, it
can be used to diagnose which paths that should have been ignored
have been mistakenly added to the index.
* dw/check-ignore-sans-index:
check-ignore: Add option to ignore index contents
|
|
check-ignore currently shows how .gitignore rules would treat untracked
paths. Tracked paths do not generate useful output. This prevents
debugging of why a path became tracked unexpectedly unless that path is
first removed from the index with `git rm --cached <path>`.
The option --no-index tells the command to bypass the check for the
path being in the index and hence allows tracked paths to be checked
too.
Whilst this behaviour deviates from the characteristics of `git add` and
`git status` its use case is unlikely to cause any user confusion.
Test scripts are augmented to check this option against the standard
ignores to ensure correct behaviour.
Signed-off-by: Dave Williams <dave@opensourcesolutions.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git mv A B" when moving a submodule A does "the right thing",
inclusing relocating its working tree and adjusting the paths in
the .gitmodules file.
* jl/submodule-mv: (53 commits)
rm: delete .gitmodules entry of submodules removed from the work tree
mv: update the path entry in .gitmodules for moved submodules
submodule.c: add .gitmodules staging helper functions
mv: move submodules using a gitfile
mv: move submodules together with their work trees
rm: do not set a variable twice without intermediate reading.
t6131 - skip tests if on case-insensitive file system
parse_pathspec: accept :(icase)path syntax
pathspec: support :(glob) syntax
pathspec: make --literal-pathspecs disable pathspec magic
pathspec: support :(literal) syntax for noglob pathspec
kill limit_pathspec_to_literal() as it's only used by parse_pathspec()
parse_pathspec: preserve prefix length via PATHSPEC_PREFIX_ORIGIN
parse_pathspec: make sure the prefix part is wildcard-free
rename field "raw" to "_raw" in struct pathspec
tree-diff: remove the use of pathspec's raw[] in follow-rename codepath
remove match_pathspec() in favor of match_pathspec_depth()
remove init_pathspec() in favor of parse_pathspec()
remove diff_tree_{setup,release}_paths
convert common_prefix() to use struct pathspec
...
|
|
check-ignore (at least the test suite) seems to rely on the pattern
order. PATHSPEC_KEEP_ORDER is introduced to explictly express this.
The lack of PATHSPEC_MAXDEPTH_VALID is sufficient because it's the
only flag that reorders pathspecs, but it's less obvious that way.
Cc: Adam Spiers <git@adamspiers.org>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
To test check-ignore's --stdin feature, we use two fifos to
send and receive data. We carefully keep a descriptor to its
input open so that it does not receive EOF between input
lines. However, we do not do the same for its output. That
means there is a potential race condition in which
check-ignore has opened the output pipe once (when we read
the first line), and then writes the second line before we
have re-opened the pipe.
In that case, check-ignore gets a SIGPIPE and dies. The
outer shell then tries to open the output fifo but blocks
indefinitely, because there is no writer. We can fix it by
keeping a descriptor open through the whole procedure.
This should also help if check-ignore dies for any other
reason (we would already have opened the fifo and would
therefore not block, but just get EOF on read).
However, we are technically still susceptible to
check-ignore dying early, before we have opened the fifo.
This is an unlikely race and shouldn't generally happen in
practice, though, so we can hopefully ignore it.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
sleeps in the check-ignore test suite are not ideal since they can
fail when the system is under load, or when a tool like valgrind is
used which drastically alters the timing. Therefore we replace them
with a more robust solution using a named pipe (FIFO).
Thanks to Jeff King for coming up with the redirection wizardry
required to make this work.
http://article.gmane.org/gmane.comp.version-control.git/220916
Signed-off-by: Adam Spiers <git@adamspiers.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Some callers, such as the git-annex web assistant, find it useful to
invoke git check-ignore as a persistent background process, which can
then have queries fed to its STDIN at any point, and the corresponding
response consumed from its STDOUT. For this we need to invoke
check_ignore() once per line of standard input, and flush standard
output after each result.
The above use case suggests that empty STDIN is actually a reasonable
scenario (e.g. when the caller doesn't know in advance whether any
queries need to be fed to the background process until after it's
already started), so we make the minor behavioural change that "no
pathspec given." is no longer emitted in when STDIN is empty.
Even though check_ignore() could now be changed to operate on a single
pathspec, we keep it operating on an array of pathspecs since that is
a more convenient way of consuming the existing pathspec API.
Signed-off-by: Adam Spiers <git@adamspiers.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If `-n` or `--non-matching` are specified, non-matching pathnames will
also be output, in which case all fields in each output record except
for <pathname> will be empty. This can be useful when running
check-ignore as a background process, so that files can be
incrementally streamed to STDIN, and for each of these files, STDOUT
will indicate whether that file matched a pattern or not. (Without
this option, it would be impossible to tell whether the absence of
output for a given file meant that it didn't match any pattern, or
that the result simply hadn't been flushed to STDOUT yet.)
Signed-off-by: Adam Spiers <git@adamspiers.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The expected contents of STDOUT for the final --stdin tests can be
derived from the expected contents of STDOUT for the same tests when
--verbose is given, in the same way that test_expect_success_multi
derives this for earlier tests.
Signed-off-by: Adam Spiers <git@adamspiers.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Usually we do not pass an empty string to the function hash_name()
because we almost always ask for hash values for a path that is a
candidate to be added to the index. However, check-ignore (and most
likely check-attr, but I didn't check) apparently has a callchain
to ask the hash value for an empty path when it was given a "." from
the top-level directory to ask "Is the path . excluded by default?"
Make sure that hash_name() does not overrun the end of the given
pathname even when it is empty.
Remove a sweep-the-issue-under-the-rug conditional in check-ignore
that avoided to pass an empty string to the callchain while at it.
It is a valid question to ask for check-ignore if the top-level is
set to be ignored by default, even though the answer is most likely
no, if only because there is currently no way to specify such an
entry in the .gitignore file. But it is an unusual thing to ask and
it is not worth optimizing for it by special casing at the top level
of the call chain.
Signed-off-by: Adam Spiers <git@adamspiers.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
test_expect_success_multi() helper function warrants some explanation,
since at first sight it may seem like generic test framework plumbing,
but is in fact specific to testing check-ignore, and allows more
thorough testing of the various output formats without significantly
increase the size of t0008.
Signed-off-by: Adam Spiers <git@adamspiers.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Brace expansion is a shell feature that's not required by POSIX and not
supported by dash nor NetBSD's sh. Explicitly list all combinations
instead. Also avoid calling touch by creating the test files with a
redirection instead, as suggested by Junio.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This works in a similar manner to git-check-attr.
Thanks to Jeff King and Junio C Hamano for the idea:
http://thread.gmane.org/gmane.comp.version-control.git/108671/focus=108815
Signed-off-by: Adam Spiers <git@adamspiers.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
Junio C Hamano
Pasha Bolokhov
Johannes Sixt
Nguyễn Thái Ngọc Duy
Ben Walton
Dave Williams
Jeff King
Adam Spiers
René Scharfe