| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
"git check-attr" when (trying to) work on a repository with a
working tree did not work well when the working tree was specified
via --work-tree (and obviously with --git-dir).
The command also works in a bare repository but it reads from the
(possibly stale, irrelevant and/or nonexistent) index, which may
need to be fixed to read from HEAD, but that is a completely
separate issue. As a related tangent to this separate issue, we
may want to also fix "check-ignore", which refuses to work in a
bare repository, to also operate in a bare one.
* jc/check-attr-honor-working-tree:
check-attr: move to the top of working tree when in non-bare repository
t0003: do not chdir the whole test process
|
|
Lasse Makholm noticed that running "git check-attr" from a place
totally unrelated to $GIT_DIR and $GIT_WORK_TREE does not give
expected results. I think it is because the command does not say it
wants to call setup_work_tree().
We still need to support use cases where only a bare repository is
involved, so unconditionally requiring a working tree would not work
well. Instead, make a call only in a non-bare repository.
We may want to see if we want to do a similar fix in the opposite
direction to check-ignore. The command unconditionally requires a
working tree, but it should be usable in a bare repository just like
check-attr attempts to be.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Moving to some other directory and letting the remainder of the test
pieces to expect that they start there is a bad practice. The test
that contains chdir itself may fail (or by mistake skipped via the
GIT_SKIP_TESTS mechanism) in which case the remainder may operate on
files in unexpected places.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
|
|
Before 82dce99 (attr: more matching optimizations from .gitignore,
2012-10-15), .gitattributes did not have any special treatment of a
leading '!'. The docs, however, always said
The rules how the pattern matches paths are the same as in
`.gitignore` files; see linkgit:gitignore[5].
By those rules, leading '!' means pattern negation. So 82dce99
correctly determined that this kind of line makes no sense and should
be disallowed.
However, users who actually had a rule for files starting with a '!'
are in a bad position: before 82dce99 '!' matched that literal
character, so it is conceivable that users have .gitattributes with
such lines in them. After 82dce99 the unescaped version was
disallowed in such a way that git outright refuses to run(!) most
commands in the presence of such a .gitattributes. It therefore
becomes very hard to fix, let alone work with, such repositories.
Let's at least allow the users to fix their repos: change the fatal
error into a warning.
Reported-by: mathstuf@gmail.com
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Allows pathname patterns in .gitignore and .gitattributes files
with double-asterisks "foo/**/bar" to match any number of directory
hierarchies.
* nd/wildmatch:
wildmatch: replace variable 'special' with better named ones
compat/fnmatch: respect NO_FNMATCH* even on glibc
wildmatch: fix "**" special case
t3070: Disable some failing fnmatch tests
test-wildmatch: avoid Windows path mangling
Support "**" wildcard in .gitignore and .gitattributes
wildmatch: make /**/ match zero or more directories
wildmatch: adjust "**" behavior
wildmatch: fix case-insensitive matching
wildmatch: remove static variable force_lower_case
wildmatch: make wildmatch's return value compatible with fnmatch
t3070: disable unreliable fnmatch tests
Integrate wildmatch to git
wildmatch: follow Git's coding convention
wildmatch: remove unnecessary functions
Import wildmatch from rsync
ctype: support iscntrl, ispunct, isxdigit and isprint
ctype: make sane_ctype[] const array
Conflicts:
Makefile
|
|
Start laying the foundation to build the "wildmatch" after we can
agree on its desired semantics.
* nd/attr-match-optim-more:
attr: more matching optimizations from .gitignore
gitignore: make pattern parsing code a separate function
exclude: split pathname matching code into a separate function
exclude: fix a bug in prefix compare optimization
exclude: split basename matching code into a separate function
exclude: stricten a length check in EXC_FLAG_ENDSWITH case
|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
.gitattributes and .gitignore share the same pattern syntax but has
separate matching implementation. Over the years, ignore's
implementation accumulates more optimizations while attr's stays the
same.
This patch reuses the core matching functions that are also used by
excluded_from_list. excluded_from_list and path_matches can't be
merged due to differences in exclude and attr, for example:
* "!pattern" syntax is forbidden in .gitattributes. As an attribute
can be unset (i.e. set to a special value "false") or made back to
unspecified (i.e. not even set to "false"), "!pattern attr" is unclear
which one it means.
* we support attaching attributes to directories, but git-core
internally does not currently make use of attributes on
directories.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Case insensitivity plays a role in several tests and is tested in several
tests. Therefore, move the test from t003 into the test lib and use the
prerequisite in t0003.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When we prepare the attribute stack for a lookup on a path,
we start with the cached stack from the previous lookup
(because it is common to do several lookups in the same
directory hierarchy). So the first thing we must do in
preparing the stack is to pop any entries that point to
directories we are no longer interested in.
For example, if our stack contains gitattributes for:
foo/bar/baz
foo/bar
foo
but we want to do a lookup in "foo/bar/bleep", then we want
to pop the top element, but retain the others.
To do this we walk down the stack from the top, popping
elements that do not match our lookup directory. However,
the test do this simply checked strncmp, meaning we would
mistake "foo/bar/baz" as a leading directory of
"foo/bar/baz_plus". We must also check that the character
after our match is '/', meaning we matched the whole path
component.
There are two special cases to consider:
1. The top of our attr stack has the empty path. So we
must not check for '/', but rather special-case the
empty path, which always matches.
2. Typically when matching paths in this way, you would
also need to check for a full string match (i.e., the
character after is '\0'). We don't need to do so in
this case, though, because our path string is actually
just the directory component of the path to a file
(i.e., we know that it terminates with "/", because the
filename comes after that).
Helped-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* bc/attr-ignore-case:
attr.c: respect core.ignorecase when matching attribute patterns
attr: read core.attributesfile from git_default_core_config
builtin/mv.c: plug miniscule memory leak
cleanup: use internal memory allocation wrapper functions everywhere
attr.c: avoid inappropriate access to strbuf "buf" member
Conflicts:
transport-helper.c
|
|
When core.ignorecase is true, the file globs configured in the
.gitattributes file should be matched case-insensitively against the paths
in the working directory. Let's do so.
Plus, add some tests.
The last set of tests is performed only on a case-insensitive filesystem.
Those tests make sure that git handles the case where the .gitignore file
resides in a subdirectory and the user supplies a path that does not match
the case in the filesystem. In that case^H^H^H^Hsituation, part of the
path supplied by the user is effectively interpreted case-insensitively,
and part of it is dependent on the setting of core.ignorecase. git will
currently only match the portion of the path below the directory holding
the .gitignore file according to the setting of core.ignorecase.
This is also partly future-proofing. Currently, git builds the attr stack
based on the path supplied by the user, so we don't have to do anything
special (like use strcmp_icase) to handle the parts of that path that don't
match the filesystem with respect to case. If git instead built the attr
stack by scanning the repository, then the paths in the origin field would
not necessarily match the paths supplied by the user. If someone makes a
change like that in the future, these tests will notice.
Signed-off-by: Brandon Casey <drafnel@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The test had excess whitespaces everywhere that made it harder to
read than necessary. Remove them.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This option causes check-attr to consider .gitattributes only from
the index, ignoring .gitattributes from the working tree. This allows
the command to be used in situations where a working tree does not exist.
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Normalize the path arguments (relative to the working tree root, if
applicable) before looking up their attributes. This requires passing
the prefix down the call chain.
This fixes two test cases for different reasons:
* "unnormalized paths" is fixed because the .gitattribute-file-seeking
code is not confused into reading the top-level file twice.
* "relative paths" is fixed because the canonical pathnames are passed
to get_check_attr() or get_all_attrs(), allowing them to match the
pathname patterns as expected.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
According to the git-check-attr synopsis, if the '--stdin' option is
used then no pathnames are expected on the command line. Change the
behavior to match this description; namely, if '--stdin' is used but
not '--', then treat all command-line arguments as attribute names.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add new usage patterns
git check-attr [-a | --all] [--] pathname...
git check-attr --stdin [-a | --all] < <list-of-paths>
which display all attributes associated with the specified file(s).
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If no pathnames are passed as command-line arguments and the --stdin
option is not specified, fail with the error message "No file
specified". Add tests of this behavior.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Previously, it was possible to have a line like "file.txt =foo" in a
.gitattribute file, after which an invocation like "git check-attr ''
-- file.txt" would succeed. This patch disallows both constructs.
Please note that any existing .gitattributes file that tries to set an
empty attribute will now trigger the error message "error: : not a
valid attribute name" whereas previously the nonsense was allowed
through.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* en/and-cascade-tests: (25 commits)
t4124 (apply --whitespace): use test_might_fail
t3404: do not use 'describe' to implement test_cmp_rev
t3404 (rebase -i): introduce helper to check position of HEAD
t3404 (rebase -i): move comment to description
t3404 (rebase -i): unroll test_commit loops
t3301 (notes): use test_expect_code for clarity
t1400 (update-ref): use test_must_fail
t1502 (rev-parse --parseopt): test exit code from "-h"
t6022 (renaming merge): chain test commands with &&
test-lib: introduce test_line_count to measure files
tests: add missing &&, batch 2
tests: add missing &&
Introduce sane_unset and use it to ensure proper && chaining
t7800 (difftool): add missing &&
t7601 (merge-pull-config): add missing &&
t7001 (mv): add missing &&
t6016 (rev-list-graph-simplify-history): add missing &&
t5602 (clone-remote-exec): add missing &&
t4026 (color): remove unneeded and unchained command
t4019 (diff-wserror): add lots of missing &&
...
Conflicts:
t/t7006-pager.sh
|
|
Breaks in a test assertion's && chain can potentially hide
failures from earlier commands in the chain.
Commands intended to fail should be marked with !, test_must_fail, or
test_might_fail. The examples in this patch do not require that.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
6df42ab (Add global and system-wide gitattributes, 2010-09-01) forgot
to quote one instance of $HOME in the tests. This would be valid
according to POSIX, but bash 4 helpfully declines to execute the
command in question with an "ambiguous redirection" error.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* po/etc-gitattributes:
Add global and system-wide gitattributes
Conflicts:
Documentation/config.txt
Makefile
|
|
Allow gitattributes to be set globally and system wide. This way, settings
for particular file types can be set in one place and apply for all user's
repositories.
The location of system-wide attributes file is $(prefix)/etc/gitattributes.
The location of the global file can be configured by setting
core.attributesfile.
Some parts of the code were copied from the implementation of the same
functionality in config.c.
Signed-off-by: Petr Onderka <gsvick@gmail.com>
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When using macros it is otherwise hard to know whether an
attribute set by the macro should override an already set
attribute. Consider the following .gitattributes file:
[attr]mybinary binary -ident
* ident
foo.bin mybinary
bar.bin mybinary ident
Without this patch both foo.bin and bar.bin will have
the ident attribute set, which is probably not what
the user expects. With this patch foo.bin will have an
unset ident attribute, while bar.bin will have it set.
Signed-off-by: Henrik Grubbström <grubba@grubba.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When using macros it isn't inconceivable to have an attribute
being set by a macro, and then being reset explicitly.
Signed-off-by: Henrik Grubbström <grubba@grubba.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This allows multiple paths to be specified on stdin.
Signed-off-by: Dmitry Potapov <dpotapov@gmail.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
Attributes can be specified at three different places: the internal
table of default values, the file $GIT_DIR/info/attributes and files
named .gitattributes in the work tree. Since bare repositories don't
have a work tree, git should ignore any .gitattributes files there.
This patch makes git do that, so the only way left for a user to specify
attributes in a bare repository is the file info/attributes (in addition
to changing the defaults and recompiling).
In addition, git-check-attr is now allowed to run without a work tree.
Like any user of the code in attr.c, it ignores the .gitattributes files
when run in a bare repository. It can still read from info/attributes.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* maint-1.5.4:
svn-git: Use binmode for reading/writing binary rev maps
diff options documentation: refer to --diff-filter in --name-status
git-svn bug with blank commits and author file
archive.c: format_subst - fixed bogus argument to memchr
copy.c: copy_fd - correctly report write errors
gitattributes: Fix subdirectory attributes specified from root directory
|
|
Signed-off-by: Matthew Ogilvie <mmogilvi_git@miniinfo.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Many scripts compare actual and expected output using
"diff -u". This is nicer than "cmp" because the output shows
how the two differ. However, not all versions of diff
understand -u, leading to unnecessary test failure.
This adds a test_cmp function to the test scripts and
switches all "diff -u" invocations to use it. The function
uses the contents of "$GIT_TEST_CMP" to compare its
arguments; the default is "diff -u".
On systems with a less-capable diff, you can do:
GIT_TEST_CMP=cmp make test
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
There was an embarrassing pair of off-by-one miscounting that
failed to match path "a/b/c" when "a/.gitattributes" tried to
name it with relative path "b/c".
This fixes it.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
Junio C Hamano
Felipe Contreras
Thomas Rast
Jeff King
Nguyễn Thái Ngọc Duy
Michael J Gruber
Brandon Casey
Jay Soffian
Michael Haggerty
Jonathan Nieder
Petr Onderka
Matthieu Moy
Henrik Grubbström
Dmitry Potapov
René Scharfe
Matthew Ogilvie