summaryrefslogtreecommitdiff
path: root/t/t0003-attributes.sh
AgeCommit message (Collapse)AuthorFilesLines
2011-09-22t0003: remove extra whitespacesLibravatar Junio C Hamano1-46/+22
The test had excess whitespaces everywhere that made it harder to read than necessary. Remove them. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-09-22Teach '--cached' option to check-attrLibravatar Jay Soffian1-4/+21
This option causes check-attr to consider .gitattributes only from the index, ignoring .gitattributes from the working tree. This allows the command to be used in situations where a working tree does not exist. Signed-off-by: Jay Soffian <jaysoffian@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-08-04git-check-attr: Normalize pathsLibravatar Michael Haggerty1-2/+2
Normalize the path arguments (relative to the working tree root, if applicable) before looking up their attributes. This requires passing the prefix down the call chain. This fixes two test cases for different reasons: * "unnormalized paths" is fixed because the .gitattribute-file-seeking code is not confused into reading the top-level file twice. * "relative paths" is fixed because the canonical pathnames are passed to get_check_attr() or get_all_attrs(), allowing them to match the pathname patterns as expected. Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-08-04git-check-attr: Demonstrate problems with relative pathsLibravatar Michael Haggerty1-1/+14
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-08-04git-check-attr: Demonstrate problems with unnormalized pathsLibravatar Michael Haggerty1-0/+9
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-08-04git-check-attr: test that no output is written to stderrLibravatar Michael Haggerty1-2/+3
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-08-04git-check-attr: Fix command-line handling to match docsLibravatar Michael Haggerty1-1/+0
According to the git-check-attr synopsis, if the '--stdin' option is used then no pathnames are expected on the command line. Change the behavior to match this description; namely, if '--stdin' is used but not '--', then treat all command-line arguments as attribute names. Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-08-04git-check-attr: Drive two tests using the same raw dataLibravatar Michael Haggerty1-36/+23
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-08-04git-check-attr: Add an --all option to show all attributesLibravatar Michael Haggerty1-0/+24
Add new usage patterns git check-attr [-a | --all] [--] pathname... git check-attr --stdin [-a | --all] < <list-of-paths> which display all attributes associated with the specified file(s). Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-08-04git-check-attr: Error out if no pathnames are specifiedLibravatar Michael Haggerty1-0/+2
If no pathnames are passed as command-line arguments and the --stdin option is not specified, fail with the error message "No file specified". Add tests of this behavior. Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-08-04git-check-attr: Add tests of command-line parsingLibravatar Michael Haggerty1-0/+7
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-08-04git-check-attr: Add missing "&&"Libravatar Michael Haggerty1-1/+1
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-08-04Disallow the empty string as an attribute nameLibravatar Michael Haggerty1-0/+6
Previously, it was possible to have a line like "file.txt =foo" in a .gitattribute file, after which an invocation like "git check-attr '' -- file.txt" would succeed. This patch disallows both constructs. Please note that any existing .gitattributes file that tries to set an empty attribute will now trigger the error message "error: : not a valid attribute name" whereas previously the nonsense was allowed through. Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-11-24Merge branch 'en/and-cascade-tests'Libravatar Junio C Hamano1-1/+1
* en/and-cascade-tests: (25 commits) t4124 (apply --whitespace): use test_might_fail t3404: do not use 'describe' to implement test_cmp_rev t3404 (rebase -i): introduce helper to check position of HEAD t3404 (rebase -i): move comment to description t3404 (rebase -i): unroll test_commit loops t3301 (notes): use test_expect_code for clarity t1400 (update-ref): use test_must_fail t1502 (rev-parse --parseopt): test exit code from "-h" t6022 (renaming merge): chain test commands with && test-lib: introduce test_line_count to measure files tests: add missing &&, batch 2 tests: add missing && Introduce sane_unset and use it to ensure proper && chaining t7800 (difftool): add missing && t7601 (merge-pull-config): add missing && t7001 (mv): add missing && t6016 (rev-list-graph-simplify-history): add missing && t5602 (clone-remote-exec): add missing && t4026 (color): remove unneeded and unchained command t4019 (diff-wserror): add lots of missing && ... Conflicts: t/t7006-pager.sh
2010-11-09tests: add missing &&Libravatar Jonathan Nieder1-1/+1
Breaks in a test assertion's && chain can potentially hide failures from earlier commands in the chain. Commands intended to fail should be marked with !, test_must_fail, or test_might_fail. The examples in this patch do not require that. Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-10-29t0003: properly quote $HOMELibravatar Thomas Rast1-1/+1
6df42ab (Add global and system-wide gitattributes, 2010-09-01) forgot to quote one instance of $HOME in the tests. This would be valid according to POSIX, but bash 4 helpfully declines to execute the command in question with an "ambiguous redirection" error. Signed-off-by: Thomas Rast <trast@student.ethz.ch> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-09-29Merge branch 'po/etc-gitattributes'Libravatar Junio C Hamano1-0/+13
* po/etc-gitattributes: Add global and system-wide gitattributes Conflicts: Documentation/config.txt Makefile
2010-09-01Add global and system-wide gitattributesLibravatar Petr Onderka1-0/+13
Allow gitattributes to be set globally and system wide. This way, settings for particular file types can be set in one place and apply for all user's repositories. The location of system-wide attributes file is $(prefix)/etc/gitattributes. The location of the global file can be configured by setting core.attributesfile. Some parts of the code were copied from the implementation of the same functionality in config.c. Signed-off-by: Petr Onderka <gsvick@gmail.com> Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-08-29t0003: add missing && at end of linesLibravatar Matthieu Moy1-5/+5
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-04-10attr: Expand macros immediately when encountered.Libravatar Henrik Grubbström1-0/+9
When using macros it is otherwise hard to know whether an attribute set by the macro should override an already set attribute. Consider the following .gitattributes file: [attr]mybinary binary -ident * ident foo.bin mybinary bar.bin mybinary ident Without this patch both foo.bin and bar.bin will have the ident attribute set, which is probably not what the user expects. With this patch foo.bin will have an unset ident attribute, while bar.bin will have it set. Signed-off-by: Henrik Grubbström <grubba@grubba.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-04-10attr: Allow multiple changes to an attribute on the same line.Libravatar Henrik Grubbström1-0/+6
When using macros it isn't inconceivable to have an attribute being set by a macro, and then being reset explicitly. Signed-off-by: Henrik Grubbström <grubba@grubba.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-10-12check-attr: Add --stdin optionLibravatar Dmitry Potapov1-0/+17
This allows multiple paths to be specified on stdin. Signed-off-by: Dmitry Potapov <dpotapov@gmail.com> Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
2008-06-09Ignore .gitattributes in bare repositoriesLibravatar René Scharfe1-0/+35
Attributes can be specified at three different places: the internal table of default values, the file $GIT_DIR/info/attributes and files named .gitattributes in the work tree. Since bare repositories don't have a work tree, git should ignore any .gitattributes files there. This patch makes git do that, so the only way left for a user to specify attributes in a bare repository is the file info/attributes (in addition to changing the defaults and recompiling). In addition, git-check-attr is now allowed to run without a work tree. Like any user of the code in attr.c, it ignores the .gitattributes files when run in a bare repository. It can still read from info/attributes. Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-04-22Merge branch 'maint-1.5.4' into maintLibravatar Junio C Hamano1-0/+8
* maint-1.5.4: svn-git: Use binmode for reading/writing binary rev maps diff options documentation: refer to --diff-filter in --name-status git-svn bug with blank commits and author file archive.c: format_subst - fixed bogus argument to memchr copy.c: copy_fd - correctly report write errors gitattributes: Fix subdirectory attributes specified from root directory
2008-04-22gitattributes: Fix subdirectory attributes specified from root directoryLibravatar Matthew Ogilvie1-0/+8
Signed-off-by: Matthew Ogilvie <mmogilvi_git@miniinfo.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-03-13add test_cmp function for test scriptsLibravatar Jeff King1-1/+1
Many scripts compare actual and expected output using "diff -u". This is nicer than "cmp" because the output shows how the two differ. However, not all versions of diff understand -u, leading to unnecessary test failure. This adds a test_cmp function to the test scripts and switches all "diff -u" invocations to use it. The function uses the contents of "$GIT_TEST_CMP" to compare its arguments; the default is "diff -u". On systems with a less-capable diff, you can do: GIT_TEST_CMP=cmp make test Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-02-07gitattributes: fix relative path matchingLibravatar Junio C Hamano1-0/+49
There was an embarrassing pair of off-by-one miscounting that failed to match path "a/b/c" when "a/.gitattributes" tried to name it with relative path "b/c". This fixes it. Signed-off-by: Junio C Hamano <gitster@pobox.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-10-31 07:20:01 +0000