summaryrefslogtreecommitdiff
path: root/t/t0001-init.sh
AgeCommit message (Collapse)AuthorFilesLines
2018-07-03t: use sane_unset() rather than 'unset' with broken &&-chainLibravatar Eric Sunshine1-2/+2
These tests intentionally break the &&-chain after using 'unset' since they don't know if 'unset' will succeed or fail and don't want a local 'unset' failure to fail the test overall. We can do better by using sane_unset(), which can be linked into the &&-chain as usual. Signed-off-by: Eric Sunshine <sunshine@sunshineco.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-06-15tests: clean after SANITY testsLibravatar Junio C Hamano1-0/+1
Some of our tests try to make sure Git behaves sensibly in a read-only directory, by dropping 'w' permission bit before doing a test and then restoring it after it is done. The latter is needed for the test framework to clean after itself without leaving a leftover directory that cannot be removed. Ancient parts of tests however arrange the above with chmod a-w . && ... do the test ... status=$? chmod 775 . (exit $status) which obviously would not work if the test somehow dies before it has the chance to do "chmod 775". Rewrite them by following a more robust pattern recently written tests use, which is test_when_finished "chmod 775 ." && chmod a-w . && ... do the test ... Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-11-02mingw: optionally redirect stderr/stdout via the same handleLibravatar Johannes Schindelin1-1/+7
The "2>&1" notation in Powershell and in Unix shells implies that stderr is redirected to the same handle into which stdout is already written. Let's use this special value to allow the same trick with GIT_REDIRECT_STDERR and GIT_REDIRECT_STDOUT: if the former's value is `2>&1`, then stderr will simply be written to the same handle as stdout. The functionality was suggested by Jeff Hostetler. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-11-02mingw: add experimental feature to redirect standard handlesLibravatar Johannes Schindelin1-0/+6
Particularly when calling Git from applications, such as Visual Studio's Team Explorer, it is important that stdin/stdout/stderr are closed properly. However, when spawning processes on Windows, those handles must be marked as inheritable if we want to use them, but that flag is a global flag and may very well be used by other spawned processes which then do not know to close those handles. Let's introduce a set of environment variables (GIT_REDIRECT_STDIN and friends) that specify paths to files, or even better, named pipes (which are similar to Unix sockets) and that are used by the spawned Git process. This helps work around above-mentioned issue: those named pipes will be opened in a non-inheritable way upon startup, and no handles are passed around (and therefore no inherited handles need to be closed by any spawned child). This feature shipped with Git for Windows (marked as experimental) since v2.11.0(2), so it has seen some serious testing in the meantime. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-08-07t0001: skip test with restrictive permissions if getpwd(3) respects themLibravatar René Scharfe1-2/+28
The sub-test "init in long base path" in t0001 checks the ability to handle long base paths with restrictive permissions (--x). On OpenBSD getcwd(3) fails in that case even for short paths. Check the two aspects separately by trying to use a long base path both with and without execute-only permissions. Only attempt the former if we know that getcwd(3) doesn't care. Original-patch-by: David Coppa <dcoppa@openbsd.org> Reported-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: René Scharfe <l.s.r@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-03-26strbuf: support long paths w/o read rights in strbuf_getcwd() on FreeBSDLibravatar René Scharfe1-0/+14
FreeBSD implements getcwd(3) as a syscall, but falls back to a version based on readdir(3) if it fails for some reason. The latter requires permissions to read and execute path components, while the former does not. That means that if our buffer is too small and we're missing rights we could get EACCES, but we may succeed with a bigger buffer. Keep retrying if getcwd(3) indicates lack of permissions until our buffer can fit PATH_MAX bytes, as that's the maximum supported by the syscall on FreeBSD anyway. This way we do what we can to be able to benefit from the syscall, but we also won't loop forever if there is a real permission issue. This fixes a regression introduced with 7333ed17 (setup: convert setup_git_directory_gently_1 et al. to strbuf, 2014-07-28) for paths longer than 127 bytes with components that miss read or execute permissions (e.g. 0711 on /home for privacy reasons); we used a fixed PATH_MAX-sized buffer before. Reported-by: Zenobiusz Kunegunda <zenobiusz.kunegunda@interia.pl> Signed-off-by: Rene Scharfe <l.s.r@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-02-02Merge branch 'mm/reset-facl-before-umask-test'Libravatar Junio C Hamano1-0/+3
Test tweaks for those who have default ACL in their git source tree that interfere with the umask test. * mm/reset-facl-before-umask-test: t0001: don't let a default ACL interfere with the umask test
2017-01-30t0001: don't let a default ACL interfere with the umask testLibravatar Matt McCutchen1-0/+3
The "init creates a new deep directory (umask vs. shared)" test expects the permissions of newly created files to be based on the umask, which fails if a default ACL is inherited from the working tree for git. So attempt to remove a default ACL if there is one. Same idea as 8ed0a740dd42bd0724aebed6e3b07c4ea2a2d5e8. (I guess I'm the only one who ever runs the test suite with a default ACL set.) Signed-off-by: Matt McCutchen <matt@mattmccutchen.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-09-25init: do not set unnecessary core.worktreeLibravatar Nguyễn Thái Ngọc Duy1-0/+2
The function needs_work_tree_config() that is called from create_default_files() is supposed to be fed the path to ".git" that looks as if it is at the top of the working tree, and decide if that location matches the actual worktree being used. This comparison allows "git init" to decide if core.worktree needs to be recorded in the working tree. In the current code, however, we feed the return value from get_git_dir(), which can be totally different from what the function expects when "gitdir" file is involved. Instead of giving the path to the ".git" at the top of the working tree, we end up feeding the actual path that the file points at. This original location of ".git" however is only known to init_db(). Make init_db() save it and have it passed to create_default_files() as a new parameter, which passes the correct location down to needs_work_tree_config() to fix this. Noticed-by: Max Nordlund <max.nordlund@sqore.com> Helped-by: Michael J Gruber <git@drmicha.warpmail.net> Helped-by: Junio C Hamano <gitster@pobox.com> Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-09-25init: correct re-initialization from a linked worktreeLibravatar Nguyễn Thái Ngọc Duy1-0/+15
When 'git init' is called from a linked worktree, we treat '.git' dir (which is $GIT_COMMON_DIR/worktrees/something) as the main '.git' (i.e. $GIT_COMMON_DIR) and populate the whole repository skeleton in there. It does not harm anything (*) but it is still wrong. Since 'git init' calls set_git_dir() at preparation time, which indirectly calls get_common_dir() and correctly detects multiple worktree setup, all git_path_buf() calls in create_default_files() will return correct paths in both single and multiple worktree setups. The only thing left is copy_templates(), which targets $GIT_DIR, not $GIT_COMMON_DIR. Fix that with get_git_common_dir(). This function will return $GIT_DIR in single-worktree setup, so we don't have to make a special case for multiple-worktree here. (*) It does in fact, thanks to another bug. More on that later. Noticed-by: Max Nordlund <max.nordlund@sqore.com> Helped-by: Michael J Gruber <git@drmicha.warpmail.net> Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-09-13config: only read .git/config from configured reposLibravatar Jeff King1-0/+9
When git_config() runs, it looks in the system, user-wide, and repo-level config files. It gets the latter by calling git_pathdup(), which in turn calls get_git_dir(). If we haven't set up the git repository yet, this may simply return ".git", and we will look at ".git/config". This seems like it would be helpful (presumably we haven't set up the repository yet, so it tries to find it), but it turns out to be a bad idea for a few reasons: - it's not sufficient, and therefore hides bugs in a confusing way. Config will be respected if commands are run from the top-level of the working tree, but not from a subdirectory. - it's not always true that we haven't set up the repository _yet_; we may not want to do it at all. For instance, if you run "git init /some/path" from inside another repository, it should not load config from the existing repository. - there might be a path ".git/config", but it is not the actual repository we would find via setup_git_directory(). This may happen, e.g., if you are storing a git repository inside another git repository, but have munged one of the files in such a way that the inner repository is not valid (e.g., by removing HEAD). We have at least two bugs of the second type in git-init, introduced by ae5f677 (lazily load core.sharedrepository, 2016-03-11). It causes init to use git_configset(), which loads all of the config, including values from the current repo (if any). This shows up in two ways: 1. If we happen to be in an existing repository directory, we'll read and respect core.sharedrepository from it, even though it should have no bearing on the new repository. A new test in t1301 covers this. 2. Similarly, if we're in an existing repo that sets core.logallrefupdates, that will cause init to fail to set it in a newly created repository (because it thinks that the user's templates already did so). A new test in t0001 covers this. We also need to adjust an existing test in t1302, which gives another example of why this patch is an improvement. That test creates an embedded repository with a bogus core.repositoryformatversion of "99". It wants to make sure that we actually stop at the bogus repo rather than continuing upward to find the outer repo. So it checks that "git config core.repositoryformatversion" returns 99. But that only works because we blindly read ".git/config", even though we _know_ we're in a repository whose vintage we do not understand. After this patch, we avoid reading config from the unknown vintage repository at all, which is a safer choice. But we need to tweak the test, since core.repositoryformatversion will not return 99; it will claim that it could not find the variable at all. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-05-11mingw: introduce the 'core.hideDotFiles' settingLibravatar Johannes Schindelin1-0/+30
On Unix (and Linux), files and directories whose names start with a dot are usually not shown by default. This convention is used by Git: the .git/ directory should be left alone by regular users, and only accessed through Git itself. On Windows, no such convention exists. Instead, there is an explicit flag to mark files or directories as hidden. In the early days, Git for Windows did not mark the .git/ directory (or for that matter, any file or directory whose name starts with a dot) hidden. This lead to quite a bit of confusion, and even loss of data. Consequently, Git for Windows introduced the core.hideDotFiles setting, with three possible values: true, false, and dotGitOnly, defaulting to marking only the .git/ directory as hidden. The rationale: users do not need to access .git/ directly, and indeed (as was demonstrated) should not really see that directory, either. However, not all dot files should be hidden by default, as e.g. Eclipse does not show them (and the user would therefore be unable to see, say, a .gitattributes file). In over five years since the last attempt to bring this patch into core Git, a slightly buggy version of this patch has served Git for Windows' users well: no single report indicated problems with the hidden .git/ directory, and the stream of problems caused by the previously non-hidden .git/ directory simply stopped. The bugs have been fixed during the process of getting this patch upstream. Note that there is a funny quirk we have to pay attention to when creating hidden files: we use Win32's _wopen() function which transmogrifies its arguments and hands off to Win32's CreateFile() function. That latter function errors out with ERROR_ACCESS_DENIED (the equivalent of EACCES) when the equivalent of the O_CREAT flag was passed and the file attributes (including the hidden flag) do not match an existing file's. And _wopen() accepts no parameter that would be transmogrified into said hidden flag. Therefore, we simply try again without O_CREAT. A slightly different method is required for our fopen()/freopen() function as we cannot even *remove* the implicit O_CREAT flag. Therefore, we briefly mark existing files as unhidden when opening them via fopen()/freopen(). The ERROR_ACCESS_DENIED error can also be triggered by opening a file that is marked as a system file (which is unlikely to be tracked in Git), and by trying to create a file that has *just* been deleted and is awaiting the last open handles to be released (which would be handled better by the "Try again?" logic, a story for a different patch series, though). In both cases, it does not matter much if we try again without the O_CREAT flag, read: it does not hurt, either. For details how ERROR_ACCESS_DENIED can be triggered, see https://msdn.microsoft.com/en-us/library/windows/desktop/aa363858 Original-patch-by: Erik Faye-Lund <kusmabite@gmail.com> Initial-Test-By: Pat Thoyts <patthoyts@users.sourceforge.net> Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-03-04Merge branch 'nd/clear-gitenv-upon-use-of-alias'Libravatar Junio C Hamano1-11/+9
Hotfix for a test breakage made between 2.7 and 'master'. * nd/clear-gitenv-upon-use-of-alias: t0001: fix GIT_* environment variable check under --valgrind
2016-03-03t0001: fix GIT_* environment variable check under --valgrindLibravatar Johannes Sixt1-11/+9
When a test case is run without --valgrind, the wrap-for-bin.sh helper script inserts the environment variable GIT_TEXTDOMAINDIR, but when run with --valgrind, the variable is missing. A recently introduced test case expects the presence of the variable, though, and fails under --valgrind. Rewrite the test case to strip conditially defined environment variables from both expected and actual output. Signed-off-by: Johannes Sixt <j6t@kdbg.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-01-20Merge branch 'nd/clear-gitenv-upon-use-of-alias'Libravatar Junio C Hamano1-0/+17
d95138e6 (setup: set env $GIT_WORK_TREE when work tree is set, like $GIT_DIR, 2015-06-26) attempted to work around a glitch in alias handling by overwriting GIT_WORK_TREE environment variable to affect subprocesses when set_git_work_tree() gets called, which resulted in a rather unpleasant regression to "clone" and "init". Try to address the same issue by always restoring the environment and respawning the real underlying command when handling alias. * nd/clear-gitenv-upon-use-of-alias: run-command: don't warn on SIGPIPE deaths git.c: make sure we do not leak GIT_* to alias scripts setup.c: re-fix d95138e (setup: set env $GIT_WORK_TREE when .. git.c: make it clear save_env() is for alias handling only
2015-12-22git.c: make sure we do not leak GIT_* to alias scriptsLibravatar Nguyễn Thái Ngọc Duy1-0/+17
The unfortunate commit d95138e (setup: set env $GIT_WORK_TREE when work tree is set, like $GIT_DIR - 2015-06-26) exposes another problem, besides git-clone that's described in the previous commit. If GIT_WORK_TREE (or even GIT_DIR) is exported to an alias script, it may mislead git commands in the script where the repo is. Granted, most scripts work on the repo where the alias is summoned from. But nowhere do we forbid the script to visit another repository. The revert of d95138e in the previous commit is sufficient as a fix. However, to protect us from accidentally leaking GIT_* environment variables again, we restore certain sensitive env before calling the external script. GIT_PREFIX is let through because there's another setup side effect that we simply accepted so far: current working directory is moved. Maybe in future we can introduce a new alias format that guarantees no cwd move, then we can unexport GIT_PREFIX. Reported-by: Gabriel Ganne <gabriel.ganne@gmail.com> Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-10-05init: use strbufs to store pathsLibravatar Jeff King1-2/+2
The init code predates strbufs, and uses PATH_MAX-sized buffers along with many manual checks on intermediate sizes (some of which make magic assumptions, such as that init will not create a path inside .git longer than 50 characters). We can simplify this greatly by using strbufs, which drops some hard-to-verify strcpy calls in favor of git_path_buf. While we're in the area, let's also convert existing calls to git_path to the safer git_path_buf (our existing calls were passed to pretty tame functions, and so were not a problem, but it's easy to be consistent and safe here). Note that we had an explicit test that "git init" rejects long template directories. This comes from 32d1776 (init: Do not segfault on big GIT_TEMPLATE_DIR environment variable, 2009-04-18). We can drop the test_must_fail here, as we now accept this and need only confirm that we don't segfault, which was the original point of the test. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-12-05Merge branch 'mh/config-flip-xbit-back-after-checking'Libravatar Junio C Hamano1-0/+7
* mh/config-flip-xbit-back-after-checking: create_default_files(): don't set u+x bit on $GIT_DIR/config
2014-11-18create_default_files(): don't set u+x bit on $GIT_DIR/configLibravatar Michael Haggerty1-0/+7
Since time immemorial, the test of whether to set "core.filemode" has been done by trying to toggle the u+x bit on $GIT_DIR/config, which we know always exists, and then testing whether the change "took". I find it somewhat odd to use the config file for this test, but whatever. The test code didn't set the u+x bit back to its original state itself, instead relying on the subsequent call to git_config_set() to re-write the config file with correct permissions. But ever since daa22c6f8d config: preserve config file permissions on edits (2014-05-06) git_config_set() copies the permissions from the old config file to the new one. This is a good change in and of itself, but it invalidates the create_default_files()'s assumption, causing "git init" to leave the executable bit set on $GIT_DIR/config. Reset the permissions on $GIT_DIR/config when we are done with the test in create_default_files(). Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-06-25Merge branch 'nd/init-restore-env'Libravatar Junio C Hamano1-2/+2
Some subcommands do not want to be aliased because of the side effects that happens while the definitions of the aliases are looked up from configuration system. * nd/init-restore-env: git potty: restore environments after alias expansion
2014-06-10git potty: restore environments after alias expansionLibravatar Nguyễn Thái Ngọc Duy1-2/+2
Commit 4ad8332 (t0001: test git init when run via an alias - 2010-11-26) noted breakages when running init via alias. The problem is for alias to be used, $GIT_DIR must be searched, but 'init' and 'clone' are not happy with that. So we start a new process like an external command, with clean environment in this case. Env variables that are set by command line (e.g. "git --git-dir=.. ") are kept. This should also fix autocorrecting a command typo to "init" because it's the same problem: aliases are read, then "init" is unhappy with $GIT_DIR already set up because of that. Reminded-by: David Turner <dturner@twopensource.com> Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-06-03Merge branch 'ep/shell-command-substitution'Libravatar Junio C Hamano1-6/+6
Adjust shell scripts to use $(cmd) instead of `cmd`. * ep/shell-command-substitution: (41 commits) t5000-tar-tree.sh: use the $( ... ) construct for command substitution t4204-patch-id.sh: use the $( ... ) construct for command substitution t4119-apply-config.sh: use the $( ... ) construct for command substitution t4116-apply-reverse.sh: use the $( ... ) construct for command substitution t4057-diff-combined-paths.sh: use the $( ... ) construct for command substitution t4038-diff-combined.sh: use the $( ... ) construct for command substitution t4036-format-patch-signer-mime.sh: use the $( ... ) construct for command substitution t4014-format-patch.sh: use the $( ... ) construct for command substitution t4013-diff-various.sh: use the $( ... ) construct for command substitution t4012-diff-binary.sh: use the $( ... ) construct for command substitution t4010-diff-pathspec.sh: use the $( ... ) construct for command substitution t4006-diff-mode.sh: use the $( ... ) construct for command substitution t3910-mac-os-precompose.sh: use the $( ... ) construct for command substitution t3905-stash-include-untracked.sh: use the $( ... ) construct for command substitution t1050-large.sh: use the $( ... ) construct for command substitution t1020-subdirectory.sh: use the $( ... ) construct for command substitution t1004-read-tree-m-u-wf.sh: use the $( ... ) construct for command substitution t1003-read-tree-prefix.sh: use the $( ... ) construct for command substitution t1002-read-tree-m-u-2way.sh: use the $( ... ) construct for command substitution t1001-read-tree-m-2way.sh: use the $( ... ) construct for command substitution ...
2014-04-29t0001-init.sh: use the $( ... ) construct for command substitutionLibravatar Elia Pinto1-6/+6
The Git CodingGuidelines prefer the $(...) construct for command substitution instead of using the backquotes `...`. The backquoted form is the traditional method for command substitution, and is supported by POSIX. However, all but the simplest uses become complicated quickly. In particular, embedded command substitutions and/or the use of double quotes require careful escaping with the backslash character. The patch was generated by: for _f in $(find . -name "*.sh") do sed -i 's@`\(.*\)`@$(\1)@g' ${_f} done and then carefully proof-read. Signed-off-by: Elia Pinto <gitter.spiros@gmail.com> Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-03-21t0001: drop subshells just for "cd"Libravatar Jeff King1-47/+9
Many tests do something like: ( mkdir foo && cd foo && git init ) You can do the same these days with "git init foo", which makes the tests shorter and simpler to read. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-03-21t0001: drop useless subshellsLibravatar Jeff King1-39/+22
Many tests use subshells, but don't actually change the shell environment. They were probably cargo-culted from earlier tests which did need subshells. Drop the useless ones. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-03-21t0001: use test_must_failLibravatar Jeff King1-27/+11
We've hand-rolled several "if" statements looking for failures. We can use test_must_fail here, which is shorter and more robust. Note that we modify the commands slightly (to use "git init foo" rather than "cd foo && git init") to avoid dealing with a subshell, but this should not affect the outcome. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-03-21t0001: use test_config_globalLibravatar Jeff King1-7/+4
We hand-set several config options using : git config -f $HOME/.gitconfig ... Instead, we can use "test_config_global". Not only is this more readable, but it cleans up for us so that subsequent tests aren't polluted by our settings. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-03-21t0001: use test_path_is_*Libravatar Jeff King1-18/+18
t0001 predates the test_path_is_* helpers, and uses "test -f" and "test -d" directly. Using the helpers provides better debugging output, and are a little more robust. As opposed to "! test -d", test_path_is_missing will actually makes sure the path does not exist at all. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-03-21t0001: make symlink reinit test more carefulLibravatar Jeff King1-2/+2
In the final test of t0001, we have a repo whose .git is a symlink to a directory "here", and we use "--separate-git-dir" to migrate that to a .git file pointing to a different directory. We check that the data is migrated to the new directory and that .git looks like a git-file. We also check that "here" is not a directory, which is slightly misleading. It should not be a directory, but neither should it be gone. It is the actual resting place of the git-file, and .git remains a symlink to it. Let's check that more explicitly, both to make our test more robust, and to make further cleanups in this area more obvious. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-03-21t: stop using GIT_CONFIG to cross repo boundariesLibravatar Jeff King1-2/+2
Some tests want to check or set config in another repository. E.g., t1000 creates repositories and makes sure that their core.bare and core.worktree settings are what we expect. We can do this with: GIT_CONFIG=$repo/.git/config git config ... but it better shows the intent to just enter the repository and let "git config" do the normal lookups: (cd $repo && git config ...) In theory, this would cause us to use an extra subshell, but in all such cases, we are actually already in a subshell. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-03-21t: drop useless sane_unset GIT_* callsLibravatar Jeff King1-15/+0
Several test scripts manually unset GIT_CONFIG and other GIT_* variables. These are generally taken care of for us by test-lib.sh already. Unsetting these is not only useless, but can be confusing to a reader, who may wonder why some tests in a script unset them and others do not (t0001 is particularly guilty of this inconsistency, probably because many of its tests predate the test-lib.sh environment-cleansing). Note that we cannot always get rid of such unsetting. For example, t9130 can drop the GIT_CONFIG unset, but not the GIT_DIR one, because lib-git-svn.sh sets the latter. And in t1000, we unset GIT_TEMPLATE_DIR, which is explicitly initialized by test-lib.sh. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-09-03Make setup_git_env() resolve .git file when $GIT_DIR is not specifiedLibravatar Nguyễn Thái Ngọc Duy1-0/+4
This makes reinitializing on a .git file repository work. This is probably the only case that setup_git_env() (via set_git_dir()) is called on a .git file. Other cases in setup_git_dir_gently() and enter_repo() both cover .git file case explicitly because they need to verify the target repo is valid. Reported-by: Ximin Luo <infinity0@gmx.com> Signed-off-by: Junio C Hamano <gitster@pobox.com> Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-05-25Merge branch 'maint'Libravatar Junio C Hamano1-1/+1
* maint: init/clone: remove short option -L and document --separate-git-dir
2011-05-25init/clone: remove short option -L and document --separate-git-dirLibravatar Nguyen Thai Ngoc Duy1-1/+1
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-05-02Merge branch 'ab/i18n-fixup'Libravatar Junio C Hamano1-5/+5
* ab/i18n-fixup: (24 commits) i18n: use test_i18n{cmp,grep} in t7600, t7607, t7611 and t7811 i18n: use test_i18n{grep,cmp} in t7508 i18n: use test_i18ngrep in t7506 i18n: use test_i18ngrep and test_i18ncmp in t7502 i18n: use test_i18ngrep in t7501 i18n: use test_i18ncmp in t7500 i18n: use test_i18ngrep in t7201 i18n: use test_i18ncmp and test_i18ngrep in t7102 and t7110 i18n: use test_i18ncmp and test_i18ngrep in t5541, t6040, t6120, t7004, t7012 and t7060 i18n: use test_i18ncmp and test_i18ngrep in t3700, t4001 and t4014 i18n: use test_i18ncmp and test_i18ngrep in t3203, t3501 and t3507 i18n: use test_i18ngrep in t2020, t2204, t3030, and t3200 i18n: use test_i18ngrep in lib-httpd and t2019 i18n: do not overuse C_LOCALE_OUTPUT (grep) i18n: use test_i18ncmp in t1200 and t2200 i18n: .git file is not a human readable message (t5601) i18n: do not overuse C_LOCALE_OUTPUT i18n: mark init-db messages for translation i18n: mark checkout plural warning for translation i18n: mark checkout --detach messages for translation ...
2011-04-13i18n: do not overuse C_LOCALE_OUTPUT (grep)Libravatar Junio C Hamano1-5/+5
Instead of skipping the whole test, introduce test_i18ngrep wrapper that pretends a successful result under GETTEXT_POISON build. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-04-12Merge branch 'nd/init-gitdir'Libravatar Junio C Hamano1-1/+1
* nd/init-gitdir: t0001: guard a new test with SYMLINKS prerequisite
2011-04-11t0001: guard a new test with SYMLINKS prerequisiteLibravatar Johannes Sixt1-1/+1
Signed-off-by: Johannes Sixt <j6t@kdbg.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-04-01Merge branch 'nd/init-gitdir'Libravatar Junio C Hamano1-0/+46
* nd/init-gitdir: init, clone: support --separate-git-dir for .git file git-init.txt: move description section up Conflicts: builtin/clone.c
2011-04-01Merge branch 'ab/i18n-st'Libravatar Junio C Hamano1-1/+1
* ab/i18n-st: (69 commits) i18n: git-shortlog basic messages i18n: git-revert split up "could not revert/apply" message i18n: git-revert literal "me" messages i18n: git-revert "Your local changes" message i18n: git-revert basic messages i18n: git-notes GIT_NOTES_REWRITE_MODE error message i18n: git-notes basic commands i18n: git-gc "Auto packing the repository" message i18n: git-gc basic messages i18n: git-describe basic messages i18n: git-clean clean.requireForce messages i18n: git-clean basic messages i18n: git-bundle basic messages i18n: git-archive basic messages i18n: git-status "renamed: " message i18n: git-status "Initial commit" message i18n: git-status "Changes to be committed" message i18n: git-status shortstatus messages i18n: git-status "nothing to commit" messages i18n: git-status basic messages ... Conflicts: builtin/branch.c builtin/checkout.c builtin/clone.c builtin/commit.c builtin/grep.c builtin/merge.c builtin/push.c builtin/revert.c t/t3507-cherry-pick-conflict.sh t/t7607-merge-overwrite.sh
2011-03-19init, clone: support --separate-git-dir for .git fileLibravatar Nguyễn Thái Ngọc Duy1-0/+46
--separate-git-dir tells git to create git dir at the specified location, instead of where it is supposed to be. A .git file that points to that location will be put in place so that it appears normal to repo discovery process. Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-03-15config: drop support for GIT_CONFIG_NOGLOBALLibravatar Jonathan Nieder1-4/+1
Now that test-lib sets $HOME to protect against pollution from user settings, GIT_CONFIG_NOGLOBAL is not needed for use by the test suite any more. And as luck would have it, a quick code search reveals no other users in the wild. This patch does not affect GIT_CONFIG_NOSYSTEM, which is still needed. Helped-by: Jeff King <peff@peff.net> Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-03-09i18n: git-init "Initialized [...] repository" messageLibravatar Ævar Arnfjörð Bjarmason1-1/+1
These messages could benefit from splitting up. An earlier version of this patch began like this: const char *reinit_shared = _("Reinitialized existing shared Git repository in %s\n"); const char *init_shared = _("Initialized empty shared Git repository in %s\n"); const char *reinit_noshared = _("Reinitialized existing Git repository in %s\n"); const char *init_noshared = _("Initialized empty Git repository in %s\n"); But in the first round of gettextization I'm aiming to keep code changes to a minimum for ease of review. So just add a comment explaining to translators how the sprintf format gets used so they can cope for now if the language's grammar allows. Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-01-06t0001,t1510,t3301: use sane_unset which always returns with status 0Libravatar Brandon Casey1-4/+4
On some shells (like /usr/xpg4/bin/sh on Solaris), unset will exit non-zero when passed the name of a variable that has not been set. Use sane_unset instead so that the return value of unset can be ignored while the && linkage of the test script can be preserved. Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-12-28Merge branch 'nd/setup'Libravatar Junio C Hamano1-0/+56
* nd/setup: (47 commits) setup_work_tree: adjust relative $GIT_WORK_TREE after moving cwd git.txt: correct where --work-tree path is relative to Revert "Documentation: always respect core.worktree if set" t0001: test git init when run via an alias Remove all logic from get_git_work_tree() setup: rework setup_explicit_git_dir() setup: clean up setup_discovered_git_dir() t1020-subdirectory: test alias expansion in a subdirectory setup: clean up setup_bare_git_dir() setup: limit get_git_work_tree()'s to explicit setup case only Use git_config_early() instead of git_config() during repo setup Add git_config_early() git-rev-parse.txt: clarify --git-dir t1510: setup case #31 t1510: setup case #30 t1510: setup case #29 t1510: setup case #28 t1510: setup case #27 t1510: setup case #26 t1510: setup case #25 ...
2010-12-22t0001: test git init when run via an aliasLibravatar Jonathan Nieder1-0/+56
Add some tests to document the correct behavior of (possibly aliased) init when run within and outside a git directory. If I set up a simple git alias “quietinit = init --quiet”, usually it will work just like ‘git init --quiet’. There are some differences, unfortunately, since in the process of checking for aliases, git has to look for a .git/config file. If ‘git quietinit’ is run from a subdirectory of an existing git repository, that repository’s configuration will affect the configuration of the new repository. In particular, the new repository can inherit bogus values for core.bare and core.worktree. Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-10-06Introduce sane_unset and use it to ensure proper && chainingLibravatar Elijah Newren1-14/+14
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-08-31tests: factor HOME=$(pwd) in test-lib.shLibravatar Matthieu Moy1-6/+0
The same pattern is used in many tests, and makes it easy for new ones to rely on $HOME being a trashable, clean, directory. Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-08-18tests: A SANITY test prereq for testing if we're rootLibravatar Ævar Arnfjörð Bjarmason1-1/+1
Some tests depend on not being able to write to files after chmod -w. This doesn't work when running the tests as root. Change test-lib.sh to test if this works, and if so it sets a new SANITY test prerequisite. The tests that use this previously failed when run under root. There was already a test for this in t3600-rm.sh, added by Junio C Hamano in 2283645 in 2006. That check now uses the new SANITY prerequisite. Some of this was resurrected from the "Tests in Cygwin" thread in May 2009: http://thread.gmane.org/gmane.comp.version-control.git/116729/focus=118385 Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-05-10handle "git --bare init <dir>" properlyLibravatar Jeff King1-0/+14
If we know we are creating a bare repository, we use setenv to set the GIT_DIR directory to the current directory (either where we already were, or one we created and chdir'd into with "git init --bare <dir>"). However, with "git --bare init <dir>" (note the --bare as a git wrapper option), the setup code actually sets GIT_DIR for us, but it uses the wrong, original cwd when a directory is given. Because our setenv does not use the overwrite flag, it is ignored. We need to set the overwrite flag, but only when we are given a directory on the command line. That still allows: GIT_DIR=foo.git git init --bare to work. The behavior is changed for: GIT_DIR=foo.git git init --bare bar.git which used to create the repository in foo.git, but now will use bar.git. This is more sane, as command line options should generally override the environment. Noticed by Oliver Hoffmann. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>