summaryrefslogtreecommitdiff
path: root/t/t0001-init.sh
AgeCommit message (Collapse)AuthorFilesLines
2011-01-06t0001,t1510,t3301: use sane_unset which always returns with status 0Libravatar Brandon Casey1-4/+4
On some shells (like /usr/xpg4/bin/sh on Solaris), unset will exit non-zero when passed the name of a variable that has not been set. Use sane_unset instead so that the return value of unset can be ignored while the && linkage of the test script can be preserved. Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-12-28Merge branch 'nd/setup'Libravatar Junio C Hamano1-0/+56
* nd/setup: (47 commits) setup_work_tree: adjust relative $GIT_WORK_TREE after moving cwd git.txt: correct where --work-tree path is relative to Revert "Documentation: always respect core.worktree if set" t0001: test git init when run via an alias Remove all logic from get_git_work_tree() setup: rework setup_explicit_git_dir() setup: clean up setup_discovered_git_dir() t1020-subdirectory: test alias expansion in a subdirectory setup: clean up setup_bare_git_dir() setup: limit get_git_work_tree()'s to explicit setup case only Use git_config_early() instead of git_config() during repo setup Add git_config_early() git-rev-parse.txt: clarify --git-dir t1510: setup case #31 t1510: setup case #30 t1510: setup case #29 t1510: setup case #28 t1510: setup case #27 t1510: setup case #26 t1510: setup case #25 ...
2010-12-22t0001: test git init when run via an aliasLibravatar Jonathan Nieder1-0/+56
Add some tests to document the correct behavior of (possibly aliased) init when run within and outside a git directory. If I set up a simple git alias “quietinit = init --quiet”, usually it will work just like ‘git init --quiet’. There are some differences, unfortunately, since in the process of checking for aliases, git has to look for a .git/config file. If ‘git quietinit’ is run from a subdirectory of an existing git repository, that repository’s configuration will affect the configuration of the new repository. In particular, the new repository can inherit bogus values for core.bare and core.worktree. Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-10-06Introduce sane_unset and use it to ensure proper && chainingLibravatar Elijah Newren1-14/+14
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-08-31tests: factor HOME=$(pwd) in test-lib.shLibravatar Matthieu Moy1-6/+0
The same pattern is used in many tests, and makes it easy for new ones to rely on $HOME being a trashable, clean, directory. Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-08-18tests: A SANITY test prereq for testing if we're rootLibravatar Ævar Arnfjörð Bjarmason1-1/+1
Some tests depend on not being able to write to files after chmod -w. This doesn't work when running the tests as root. Change test-lib.sh to test if this works, and if so it sets a new SANITY test prerequisite. The tests that use this previously failed when run under root. There was already a test for this in t3600-rm.sh, added by Junio C Hamano in 2283645 in 2006. That check now uses the new SANITY prerequisite. Some of this was resurrected from the "Tests in Cygwin" thread in May 2009: http://thread.gmane.org/gmane.comp.version-control.git/116729/focus=118385 Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-05-10handle "git --bare init <dir>" properlyLibravatar Jeff King1-0/+14
If we know we are creating a bare repository, we use setenv to set the GIT_DIR directory to the current directory (either where we already were, or one we created and chdir'd into with "git init --bare <dir>"). However, with "git --bare init <dir>" (note the --bare as a git wrapper option), the setup code actually sets GIT_DIR for us, but it uses the wrong, original cwd when a directory is given. Because our setenv does not use the overwrite flag, it is ignored. We need to set the overwrite flag, but only when we are given a directory on the command line. That still allows: GIT_DIR=foo.git git init --bare to work. The behavior is changed for: GIT_DIR=foo.git git init --bare bar.git which used to create the repository in foo.git, but now will use bar.git. This is more sane, as command line options should generally override the environment. Noticed by Oliver Hoffmann. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-02-25t/t0001-init.sh: add test for 'init with init.templatedir set'Libravatar Steven Drake1-0/+19
Requires a small change to wrap-for-bin.sh in order to work. Signed-off-by: Steven Drake <sdrake@xnet.co.nz> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-08-09t0001-init: split the existence test from the permission testLibravatar Johannes Sixt1-0/+6
The test for correct permissions after init created a deep directory must be guarded by POSIXPERM. But testing that the deep dirctory exists is good even on platforms that do not provide the POSIXPERM prerequiste. Signed-off-by: Johannes Sixt <j6t@kdbg.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-08-09t0001-init: fix a file nameLibravatar Johannes Sixt1-1/+1
Without this change, grep fails because it does not find the file instead of because it does not find the text in the file. Signed-off-by: Johannes Sixt <j6t@kdbg.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-07-25git init: optionally allow a directory argumentLibravatar Nanako Shiraishi1-0/+77
When starting a new repository, I see my students often say % git init newrepo and curse git. They could say % mkdir newrepo; cd newrepo; git init but allowing it as an obvious short-cut may be nicer. Signed-off-by: Nanako Shiraishi <nanako3@lavabit.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-04-18init: Do not segfault on big GIT_TEMPLATE_DIR environment variableLibravatar Frank Lichtenheld1-0/+9
Signed-off-by: Frank Lichtenheld <flichtenheld@astaro.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-10-08git init: --bare/--shared overrides system/global configLibravatar Deskin Miller1-0/+32
If core.bare or core.sharedRepository are set in /etc/gitconfig or ~/.gitconfig, then 'git init' will read the values when constructing a new config file; reading them, however, will override the values specified on the command line. In the case of --bare, this ends up causing a segfault, without the repository being properly initialised; in the case of --shared, the permissions are set according to the existing config settings, not what was specified on the command line. This fix saves any specified values for --bare and --shared prior to reading existing config settings, and restores them after reading but before writing the new config file. core.bare is ignored in all situations, while core.sharedRepository will only be used if --shared is not specified to git init. Also includes testcases which use a specified global config file override, demonstrating the former failure scenario. Signed-off-by: Deskin Miller <deskinm@umich.edu> Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
2008-07-27init: handle empty "template" parameterLibravatar Jeff King1-0/+26
If a user passes "--template=", then our template parameter is blank. Unfortunately, copy_templates() assumes it has at least one character, and does all sorts of bad things like reading from template[-1] and then proceeding to link all of '/' into the .git directory. This patch just checks for that condition in copy_templates and aborts. As a side effect, this means that --template= now has the meaning "don't copy any templates." Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-07-11t0001-init.sh: change confusing directory nameLibravatar Miklos Vajna1-3/+3
using git-init as directory name confused 'make remove-dashes', so just drop the 'git-' prefix. Signed-off-by: Miklos Vajna <vmiklos@frugalware.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-05-28git-init: accept --bare optionLibravatar Luciano Rocha1-0/+11
It is unfortunate that "git init --bare" does not work and the only reason why "init" did not learn its own "--bare" option is because "git --bare init" already does the job (and as an option to the git 'potty', it is more generic solution). This teaches "git init" its own "--bare" option, so that both "git --bare init" and "git init --bare" works mostly the same way. [jc: rewrote the log message and added test] Signed-off-by: Luciano Rocha <strange@nsk.pt> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-03-25init: show "Reinit" message even in an (existing) empty repositoryLibravatar Johannes Schindelin1-0/+17
Earlier, git-init tested for a valid HEAD ref, but if the repository was empty, there was none. Instead, test for the existence of the file $GIT_DIR/HEAD. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-12-04Do not rely on the exit status of "unset" for unset variablesLibravatar H.Merijn Brand1-8/+8
POSIX says that exit status "0" means that "unset" successfully unset the variable. However, it is kind of ambiguous if an environment variable which was not set could be successfully unset. At least the default shell on HP-UX insists on reporting an error in such a case, so just ignore the exit status of "unset". [Dscho: extended the patch to git-submodule.sh, as Junio realized that this is the only other place where we check the exit status of "unset".] Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-08-27Fix initialization of a bare repositoryLibravatar Junio C Hamano1-0/+116
Here is my attempt to fix this with a minimally intrusive patch. * As "git --bare init" cannot tell if it was called with --bare or just "GIT_DIR=. git init", I added an explicit assignment of is_bare_repository_cfg on the codepath for "git --bare". * GIT_WORK_TREE alone without GIT_DIR does not make any sense, nor GIT_WORK_TREE with an explicit "git --bare". Catch that mistake. It might make sense to move this check to "git.c" side as well, but I tried to shoot for the minimum change for now. * Some scripts, especially from the olden days, rely on traditional GIT_DIR behaviour in "git init". Namely, these are some notable patterns: (create a bare repository) - mkdir some.git && cd some.git && GIT_DIR=. git init - mkdir some.git && cd some.git && git --bare init (create a non-bare repository) - mkdir .git && GIT_DIR=.git git init - mkdir .git && GIT_DIR=`pwd`/.git git init This comes with a new test script and also passes the existing test suite, but there may be cases that are still broken with the current tip of master and this patch does not yet fix. I'd appreciate help in straightening this mess out. Signed-off-by: Junio C Hamano <gitster@pobox.com>