| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
As a follow-up to d162b25f956 (tests: remove support for
GIT_TEST_GETTEXT_POISON, 2021-01-20) remove those uses of the now
always true C_LOCALE_OUTPUT prerequisite from those tests which
declare it as an argument to test_expect_{success,failure}.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When we use the sub-test helpers, we end up defining one shell snippet
inside another shell snippet. So if we use single-quotes for the outer
snippet, we have to use double-quotes within the inner snippet (it's
included as here-doc within the outer snippet, but using a single quote
would end the outer snippet early). Or vice versa we can use double
quotes for the outer snippet, but then single quotes in the inner.
We have some of each in the script, and neither is wrong. But it would
be nice to be consistent unless there is a good reason not to. Using
single quotes for the outer script is preferable, because it requires
less metacharacter quoting overall. For example, in:
test_expect_success 'outer' '
run_sub_test_lib_test ... <<-\EOF
echo $foo &&
test_expect_success "inner" "
echo \$bar
"
EOF
'
we need only quote inside "inner", but not inside "outer" or the
here-doc. Whereas if we flip them, we have to quote in both places:
test_expect_success 'outer' "
run_sub_test_lib_test ... <<-\EOF
echo \$foo &&
test_expect_success 'inner' '
echo \$bar
'
EOF
"
The exception is when we need a literal single-quote in an expected
output here-doc. There we can either use outer double-quotes, or just
use ${SQ} within the doc. I chose the latter for consistency (within
this test, but also with other test scripts that face the same problem).
There is one other interesting case, which is some tests that do:
test_expect_success ... "
do_something --run='"'!3'"'
"
This is rather confusing to read, but is correct. The outer script sees
'!3' in single-quotes, as does the eval'd snippet. This is perhaps being
overly cautious. In many interactive shells, an exclamation triggers
history expansion even inside double quotes, but that is not generally
true in non-interactive shells.
There's some conflicting information here. Commit 784ce03d55 (t4216:
avoid unnecessary subshell in test_bloom_filters_not_used, 2020-05-19)
reports it as a problem with OpenBSD 6.7's /bin/sh. However, we have
many instances in this script of prereqs like !LAZY_TRUE, which haven't
been a problem. I left them un-escaped here to test out this theory.
It's much nicer if we can not worry about this as a portability issue,
so it's worth knowing.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Our check of test_when_finished is done directly in the main script, and
if we failed to clean, we complain and exit immediately. It's nicer to
signal a test failure here, for a few reasons:
- this gives better output to the user when run under a TAP harness
like "prove"
- constency; it's the only test left in the file that behaves this way
- half of its "if" conditional is nonsense anyway; it picked up a
reference to GIT_TEST_FAIL_PREREQS_INTERNAL in dfe1a17df9 (tests:
add a special setup where prerequisites fail, 2019-05-13) along with
its neighbors, even though it has nothing to do with that flag
We could actually do this without a sub-test at all, and just put our
two tests (one to do cleanup, and one to check that it happened) in the
main script. But doing it in a subtest is conceptually cleaner (from the
perspective of the main test script, we are checking only one thing),
and it remains consistent with the "cleanup when failing" test directly
after it, which has to happen in a sub-test (to avoid the main script
complaining of the failed test).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We test the behavior of prerequisites in t0000 by setting up fake ones
in the main test script, trying to run some tests, and then seeing if
those tests impacted the environment correctly. If they didn't, then we
write a message and manually call exit.
Instead, let's push these down into a sub-test, like many of the other
tests covering the framework itself. This has a few advantages:
- it does not pollute the test output with mention of skipped tests
(that we know are uninteresting -- the point of the test was to see
that these are skipped).
- when running in a TAP harness, we get a useful test failure message
(whereas when the script exits early, a tool like "prove" simply
says "Dubious, test returned 1").
- we do not have to worry about different test environments, such as
when GIT_TEST_FAIL_PREREQS_INTERNAL is set. Our sub-test helpers
already give us a known environment.
- the tests themselves are a bit easier to read, as we can just check
the test-framework output to see what happened (and get the usual
test_cmp diff if it failed)
A few notes on the implementation:
- we could do one sub-test per each individual test_expect_success. I
broke it up here into a few logical groups, as I think this makes it
more readable
- the original tests modified environment variables inside the test
bodies. Instead, I've used "true" as the body of a test we expect to
run and "false" otherwise. Technically this does not confirm that
the body of the "true" test actually ran. We are trusting the
framework output to believe that it truly ran, which is sufficient
for these tests. And I think the end result is much simpler to
follow.
- the nested_prereq test uses a few bare "test -f" calls; I converted
these to our usual test_path_is_* helpers while moving the code
around.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We check that test_when_finished cleans up after a test, and that it
runs even after a failure. Those two were originally adjacent, but got
split apart by the new test added in 477dcaddb6 (tests: do not let lazy
prereqs inside `test_expect_*` turn off tracing, 2020-03-26), and then
further by more lazy-prereq tests. Let's move them back together.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A lazily defined test prerequisite can now be defined in terms of
another lazily defined test prerequisite.
* sg/tests-prereq:
tests: fix description of 'test_set_prereq'
tests: make sure nested lazy prereqs work reliably
|
|
Some test prereqs depend on other prereqs, so in a couple of cases we
have nested prereqs that look something like this:
test_lazy_prereq FOO '
test_have_prereq BAR &&
check-foo
'
This can be problematic, because lazy prereqs are evaluated in the
'$TRASH_DIRECTORY/prereq-test-dir' directory, which is the same for
every prereq, and which is automatically removed after the prereq has
been evaluated. So if the inner prereq (BAR above) is a lazy prereq
that hasn't been evaluated yet, then after its evaluation the
'prereq-test-dir' shared with the outer prereq will be removed.
Consequently, 'check-foo' will find itself in a non-existing
directory, and won't be able to create/access any files in its cwd,
which could result in an unfulfilled outer prereq.
Luckily, this doesn't affect any of our current nested prereqs, either
because the inner prereq is not a lazy prereq (e.g. MINGW, CYGWIN or
PERL), or because the outer prereq happens to be checked without
touching any paths in its cwd (GPGSM and RFC1991 in 'lib-gpg.sh').
So to prevent nested prereqs from interfering with each other let's
evaluate each prereq in its own dedicated directory by appending the
prereq's name to the directory name, e.g. 'prereq-test-dir-SYMLINKS'.
In the test we check not only that the prereq test dir is still there,
but also that the inner prereq can't mess with the outer prereq's
files.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Our test scripts can be told to run only individual pieces while
skipping others with the "--run=..." option; they were taught to
take a substring of test title, in addition to numbers, to name the
test pieces to run.
* en/test-selector:
test-lib: reduce verbosity of skipped tests
t6006, t6012: adjust tests to use 'setup' instead of synonyms
test-lib: allow selecting tests by substring/glob with --run
|
|
Many of our test scripts have several "setup" tests. It's a lot easier
to say
./t0050-filesystem.sh --run=setup,9
in order to run all the setup tests as well as test #9, than it is to
track down what all the setup tests are and enter all their numbers in
the list. Also, I often find myself wanting to run just one or a couple
tests from the test file, but I don't know the numbering of any of the
tests -- to get it I either have to first run the whole test file (or
start counting by hand or figure out some other clever but non-obvious
tricks). It's really convenient to be able to just look at the test
description(s) and then run
./t6416-recursive-corner-cases.sh --run=symlink
or
./t6402-merge-rename.sh --run='setup,unnecessary update'
Add such an ability to test selection which relies on merely matching
against the test description.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Caleb Tillman <caleb.tillman@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The final leg of SHA-256 transition.
* bc/sha-256-part-3: (39 commits)
t: remove test_oid_init in tests
docs: add documentation for extensions.objectFormat
ci: run tests with SHA-256
t: make SHA1 prerequisite depend on default hash
t: allow testing different hash algorithms via environment
t: add test_oid option to select hash algorithm
repository: enable SHA-256 support by default
setup: add support for reading extensions.objectformat
bundle: add new version for use with SHA-256
builtin/verify-pack: implement an --object-format option
http-fetch: set up git directory before parsing pack hashes
t0410: mark test with SHA1 prerequisite
t5308: make test work with SHA-256
t9700: make hash size independent
t9500: ensure that algorithm info is preserved in config
t9350: make hash size independent
t9301: make hash size independent
t9300: use $ZERO_OID instead of hard-coded object ID
t9300: abstract away SHA-1-specific constants
t8011: make hash size independent
...
|
|
Now that we call test_oid_init in the setup for all test scripts,
there's no point in calling it individually. Remove all of the places
where we've done so to help keep tests tidy.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Reviewed-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In some tests, we have data files which are written with a particular
hash algorithm. Instead of keeping two copies of the test files, we can
keep one, and translate the value on the fly.
In order to do so, we'll need to read both the source algorithm and the
current algorithm, so add an optional flag to the test_oid helper that
lets us look up a value for a specified hash algorithm. This should
not cause any conflicts with existing tests, since key arguments to
test_oid are allowed to contains only shell identifier characters.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Reviewed-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In previous commits, we removed the usage of test_must_fail() for most
commands except for a set of pre-approved commands. Since that's done,
only allow test_must_fail() to run those pre-approved commands.
Obviously, we should allow `git`.
We allow `__git*` as some completion functions return an error code that
comes from a git invocation. It's good to avoid using test_must_fail
unnecessarily but it wouldn't hurt to err on the side of caution when
we're potentially wrapping a git command (like in these cases).
We also allow `test-tool` and `test-svn-fe` because these are helper
commands that are written by us and we want to catch their failure.
Finally, we allow `test_terminal` because `test_terminal` just wraps
around git commands. Also, we cannot rewrite
`test_must_fail test_terminal` as `test_terminal test_must_fail` because
test_must_fail() is a shell function and as a result, it cannot be
invoked from the test-terminal Perl script.
We opted to explicitly list the above tools instead of using a catch-all
such as `test[-_]*` because we want to be as restrictive as possible so
that in the future, someone would not accidentally introduce an
unrelated usage of test_must_fail() on an "unapproved" command.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The basic test did not honor $TEST_SHELL_PATH setting, which has
been corrected.
* cb/t0000-use-the-configured-shell:
t/t0000-basic: make sure subtests also use TEST_SHELL_PATH
|
|
3f824e91c8 (t/Makefile: introduce TEST_SHELL_PATH, 2017-12-08) allows for
setting a shell for running the tests, but the generated subtests weren't
updated.
Correct that and while at it update it to use write_script.
Signed-off-by: Carlo Marcelo Arenas Belón <carenas@gmail.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The test added by 477dcaddb6 (tests: do not let lazy prereqs inside
`test_expect_*` turn off tracing, 2020-03-26) runs a sub-test script
that traces a test with a lazy prereq, like:
test_have_prereq LAZY && echo trace
That won't work if GIT_TEST_FAIL_PREREQS is set in the environment,
because our have_prereq will report failure, and we won't run the echo
at all.
We could work around this by avoiding the &&-chain, but we can
fix this and any future tests at once by unsetting that variable for our
sub-tests. These are meant to be controlled environments where we test
the test-suite itself; the outer test snippet should be in charge of the
sub-test environment, not whatever mode the user happens to be running
in.
Reported-by: Son Luong Ngoc <sluongng@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The `test_expect_*` functions use `test_eval_` and so does
`test_run_lazy_prereq_`. If tracing is enabled via the `-x` option,
`test_eval_` turns on tracing while evaluating the code block, and turns
it off directly after it.
This is unwanted for nested invocations.
One somewhat surprising example of this is when running a test that
calls `test_i18ngrep`: that function requires the `C_LOCALE_OUTPUT`
prereq, and that prereq is a lazy one, so it is evaluated via
`test_eval_`, the command tracing is turned off, and the test case
continues to run _without tracing the commands_.
Another somewhat surprising example is when one lazy prereq depends on
another lazy prereq: the former will call `test_have_prereq` with the
latter one, which in turn calls `test_eval_` and -- you guessed it --
tracing (if enabled) will be turned off _before_ returning to evaluating
the other lazy prereq.
As we will introduce just such a scenario with the GPG, GPGSM and
RFC1991 prereqs, let's fix that by introducing a variable that keeps
track of the current trace level: nested `test_eval_` calls will
increment and then decrement the level, and only when it reaches 0, the
tracing will _actually_ be turned off.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Test clean-up.
* dl/test-must-fail-fixes:
t1507: inline full_name()
t1507: run commands within test_expect_success
t1507: stop losing return codes of git commands
t1501: remove use of `test_might_fail cp`
t1409: use test_path_is_missing()
t1409: let sed open its own input file
t1307: reorder `nongit test_must_fail`
t1306: convert `test_might_fail rm` to `rm -f`
t0020: use ! check_packed_refs_marked
t0020: don't use `test_must_fail has_cr`
t0003: don't use `test_must_fail attr_check`
t0003: use test_must_be_empty()
t0003: use named parameters in attr_check()
t0000: replace test_must_fail with run_sub_test_lib_test_err()
t/lib-git-p4: use test_path_is_missing()
|
|
The test_must_fail function should only be used for git commands since
we should assume that external commands work sanely. We use
test_must_fail to test run_sub_test_lib_test() but that function does
not invoke any git commands internally. Even better, we have a function
that's exactly meant to be used when we expect to have a failing test
suite: run_sub_test_lib_test_err()!
Replace `test_must_fail run_sub_test_lib_test` with
`run_sub_test_lib_test_err`.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Recently we have declared that GIT_TEST_* variables take the
usual boolean values (it used to be that some used "non-empty
means true" and taking GIT_TEST_VAR=YesPlease as true); make
sure we notice and fail when non-bool strings are given to
these variables.
* sg/test-bool-env:
t5608-clone-2gb.sh: turn GIT_TEST_CLONE_2GB into a bool
tests: add 'test_bool_env' to catch non-bool GIT_TEST_* values
|
|
Test cleanup.
* dl/t5520-cleanup:
t5520: replace `! git` with `test_must_fail git`
t5520: remove redundant lines in test cases
t5520: replace $(cat ...) comparison with test_cmp
t5520: don't put git in upstream of pipe
t5520: test single-line files by git with test_cmp
t5520: use test_cmp_rev where possible
t5520: replace test -{n,z} with test-lib functions
t5520: use test_line_count where possible
t5520: remove spaces after redirect operator
t5520: replace test -f with test-lib functions
t5520: let sed open its own input
t5520: use sq for test case names
t5520: improve test style
t: teach test_cmp_rev to accept ! for not-equals
t0000: test multiple local assignment
|
|
Since 3b072c577b (tests: replace test_tristate with "git env--helper",
2019-06-21) we get the normalized bool values of various GIT_TEST_*
environment variables via 'git env--helper'. Now, while the 'git
env--helper' command itself does catch invalid values in the
environment variable or in the given --default and exits with error
(exit code 128 or 129, respectively), it's invoked in conditions like
'if ! git env--helper ...', which means that all invalid bool values
are interpreted the same as the ordinary 'false' (exit code 1). This
has led to inadvertently skipped httpd tests in our CI builds for a
couple of weeks, see 3960290675 (ci: restore running httpd tests,
2019-09-06).
Let's be more careful about what the test suite accepts as bool values
in GIT_TEST_* environment variables, and error out loud and clear on
invalid values instead of simply skipping tests. Add the
'test_bool_env' helper function to encapsulate the invocation of 'git
env--helper' and the verification of its exit code, and replace all
invocations of that command in our test framework and test suite with
a call to this new helper (except in 't0017-env-helper.sh', of
course).
$ GIT_TEST_GIT_DAEMON=YesPlease ./t5570-git-daemon.sh
fatal: bad numeric config value 'YesPlease' for 'GIT_TEST_GIT_DAEMON': invalid unit
error: test_bool_env requires bool values both for $GIT_TEST_GIT_DAEMON and for the default fallback
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
According to POSIX enhancement request '0000767: Add built-in
"local"'[1],
dash only allows one variable in a local definition; it permits
assignment though it doesn't document that clearly.
however, this isn't true since t0000 still passes with this patch
applied on dash 0.5.10.2. Needless to say, since `local` isn't POSIX
standardized, it is not exactly clear what `local` entails on different
versions of different shells.
We currently already have many instances of multiple local assignments
in our codebase. Ensure that this is actually supported by explicitly
testing that it is sane.
[1]: http://austingroupbugs.net/bug_view_page.php?bug_id=767
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Reported-by: Jens Schleusener <Jens.Schleusener@fossies.org>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
test update.
* dl/t0000-skip-test-test:
t0000: cover GIT_SKIP_TESTS blindspots
|
|
Currently, the tests for GIT_SKIP_TESTS do not cover the situation where
we skip an entire test suite. The tests also do not cover the situation
where we have GIT_SKIP_TESTS defined but the test suite does not match.
Add two test cases so we cover this blindspot.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The first line of verbose output from each test piece now carries
the test name and number to help scanning with eyeballs.
* sg/show-failed-test-names:
tests: show the test name and number at the start of verbose output
t0000-basic: use realistic test script names in the verbose tests
|
|
Test fix.
* bc/hash-independent-tests-part-4:
t0000: reword comments for "local" test
t: decrease nesting in test_oid_to_path
|
|
Commit 01d3a526ad (t0000: check whether the shell supports the "local"
keyword, 2017-10-26) added a test to gather data on whether people run
the test suite with shells that don't support "local".
After almost two years, nobody has complained, and several other uses
have cropped up in test-lib-functions.sh. Let's declare it acceptable to
use.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The verbose output of every test looks something like this:
expecting success:
echo content >file &&
git add file &&
git commit -m "add file"
[master (root-commit) d1fbfbd] add file
Author: A U Thor <author@example.com>
1 file changed, 1 insertion(+)
create mode 100644 file
ok 1 - commit works
i.e. first an "expecting success" (or "checking known breakage") line
followed by the commands to be executed, then the output of those
comamnds, and finally an "ok"/"not ok" line containing the test name.
Note that the test's name is only shown at the very end.
With '-x' tracing enabled and/or in longer tests the verbose output
might be several screenfulls long, making it harder than necessary to
find where the output of the test with a given name starts (especially
when the outputs to different file descriptors are racing, and the
"expecting success"/command block arrives earlier than the "ok" line
of the previous test).
Print the test name at the start of the test's verbose output, i.e. at
the end of the "expecting success" and "checking known breakage"
lines, to make the start of a particular test a bit easier to
recognize. Also print the test script and test case numbers, to help
those poor souls who regularly have to scan through the combined
verbose output of several test scripts.
So the dummy test above would start like this:
expecting success of 9999.1 'commit works':
echo content >file &&
[...]
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Our test scripts are named something like 't1234-command.sh', but the
script names used in 't0000-basic.sh' don't follow this naming
convention. Normally this doesn't matter, because the test scripts
themselves don't care how they are called. However, the next patch
will start to include the test number in the test's verbose output, so
the test script's name will matter in the two tests checking the
verbose output.
Update the tests 'test --verbose' and 'test --verbose-only' to follow
out test script naming convention.
Leave the other tests in 't0000' unchanged: changing the names of
their test scripts would be only pointless code churn.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Change the GIT_TEST_FAIL_PREREQS variable from being "non-empty?" to
being a more standard boolean variable. I recently added the variable
in dfe1a17df9 ("tests: add a special setup where prerequisites fail",
2019-05-13), having to add another "non-empty?" special-case is what
prompted me to write the "git env--helper" utility being used here.
Converting this one is a bit tricky since we use it so early and
frequently in the guts of the test code itself, so let's set a
GIT_TEST_FAIL_PREREQS_INTERNAL which can be tested with the old "test
-n" for the purposes of the shell code, and change the user-exposed
and documented GIT_TEST_FAIL_PREREQS variable to a boolean.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
As discussed in [1] there's a regression in the "pu" branch now
because a new test implicitly assumed that a previous test guarded by
a prerequisite had been run. Add a "GIT_TEST_FAIL_PREREQS" special
test setup where we'll skip (nearly) all tests guarded by
prerequisites, allowing us to easily emulate those platform where we
don't run these tests.
As noted in the documentation I'm adding I'm whitelisting the SYMLINKS
prerequisite for now. A lot of tests started failing if we lied about
not supporting symlinks. It's also unlikely that we'll have a failing
test due to a hard dependency on symlinks without that being the
obvious cause, so for now it's not worth the effort to make it work.
1. https://public-inbox.org/git/nycvar.QRO.7.76.6.1905131531000.44@tvgsbejvaqbjf.bet/
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When running Apache, 'git daemon', or p4d, we want to kill them at the
end of the test script, otherwise a leftover daemon process will keep
its port open indefinitely, and thus will interfere with subsequent
executions of the same test script.
So far, we stop these daemon processes "manually", i.e.:
- by registering functions or commands in the trap on EXIT to stop
the daemon while preserving the last seen exit code before the
trap (to deal with a failure when run with '--immediate' or with
interrupts by ctrl-C),
- and by invoking these functions/commands last thing before
'test_done' (and sometimes restoring the test framework's default
trap on EXIT, to prevent the daemons from being killed twice).
On one hand, we do this inconsistently, e.g. 'git p4' tests invoke
different functions in the trap on EXIT and in the last test before
'test_done', and they neither restore the test framework's default trap
on EXIT nor preserve the last seen exit code. On the other hand, this
is error prone, because, as shown in a previous patch in this series,
any output from the cleanup commands in the trap on EXIT can prevent a
proper cleanup when a test script run with '--verbose-log' and certain
shells, notably 'dash', is interrupted.
Let's introduce 'test_atexit', which is loosely modeled after
'test_when_finished', but has a broader scope: rather than running the
commands after the current test case, run them when the test script
finishes, and also run them when the test is interrupted, or exits
early in case of a failure while the '--immediate' option is in
effect.
When running the cleanup commands at the end of a successful test,
then they will be run in 'test_done' before it removes the trash
directory, i.e. the cleanup commands will still be able to access any
pidfiles or socket files in there. When running the cleanup commands
after an interrupt or failure with '--immediate', then they will be
run in the trap on EXIT. In both cases they will be run in
'test_eval_', i.e. both standard error and output of all cleanup
commands will go where they should according to the '-v' or
'--verbose-log' options, and thus won't cause any troubles when
interrupting a test script run with '--verbose-log'.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Change the GETTEXT_POISON compile-time + runtime GIT_GETTEXT_POISON
test parameter to only be a GIT_TEST_GETTEXT_POISON=<non-empty?>
runtime parameter, to be consistent with other parameters documented
in "Running tests with special setups" in t/README.
When I added GETTEXT_POISON in bb946bba76 ("i18n: add GETTEXT_POISON
to simulate unfriendly translator", 2011-02-22) I was concerned with
ensuring that the _() function would get constant folded if NO_GETTEXT
was defined, and likewise that GETTEXT_POISON would be compiled out
unless it was defined.
But as the benchmark in my [1] shows doing a one-off runtime
getenv("GIT_TEST_[...]") is trivial, and since GETTEXT_POISON was
originally added the GIT_TEST_* env variables have become the common
idiom for turning on special test setups.
So change GETTEXT_POISON to work the same way. Now the
GETTEXT_POISON=YesPlease compile-time option is gone, and running the
tests with GIT_TEST_GETTEXT_POISON=[YesPlease|] can be toggled on/off
without recompiling.
This allows for conditionally amending tests to test with/without
poison, similar to what 859fdc0c3c ("commit-graph: define
GIT_TEST_COMMIT_GRAPH", 2018-08-29) did for GIT_TEST_COMMIT_GRAPH. Do
some of that, now we e.g. always run the t0205-gettext-poison.sh test.
I did enough there to remove the GETTEXT_POISON prerequisite, but its
inverse C_LOCALE_OUTPUT is still around, and surely some tests using
it can be converted to e.g. always set GIT_TEST_GETTEXT_POISON=.
Notes on the implementation:
* We still compile a dedicated GETTEXT_POISON build in Travis
CI. Perhaps this should be revisited and integrated into the
"linux-gcc" build, see ae59a4e44f ("travis: run tests with
GIT_TEST_SPLIT_INDEX", 2018-01-07) for prior art in that area. Then
again maybe not, see [2].
* We now skip a test in t0000-basic.sh under
GIT_TEST_GETTEXT_POISON=YesPlease that wasn't skipped before. This
test relies on C locale output, but due to an edge case in how the
previous implementation of GETTEXT_POISON worked (reading it from
GIT-BUILD-OPTIONS) wasn't enabling poison correctly. Now it does,
and needs to be skipped.
* The getenv() function is not reentrant, so out of paranoia about
code of the form:
printf(_("%s"), getenv("some-env"));
call use_gettext_poison() in our early setup in git_setup_gettext()
so we populate the "poison_requested" variable in a codepath that's
won't suffer from that race condition.
* We error out in the Makefile if you're still saying
GETTEXT_POISON=YesPlease to prompt users to change their
invocation.
* We should not print out poisoned messages during the test
initialization itself to keep it more readable, so the test library
hides the variable if set in $GIT_TEST_GETTEXT_POISON_ORIG during
setup. See [3].
See also [4] for more on the motivation behind this patch, and the
history of the GETTEXT_POISON facility.
1. https://public-inbox.org/git/871s8gd32p.fsf@evledraar.gmail.com/
2. https://public-inbox.org/git/20181102163725.GY30222@szeder.dev/
3. https://public-inbox.org/git/20181022202241.18629-2-szeder.dev@gmail.com/
4. https://public-inbox.org/git/878t2pd6yu.fsf@evledraar.gmail.com/
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Some environment variables that control the runtime options of Git
used during tests are getting renamed for consistency.
* bp/rename-test-env-var:
t0000: do not get self-test disrupted by environment warnings
preload-index: update GIT_FORCE_PRELOAD_TEST support
read-cache: update TEST_GIT_INDEX_VERSION support
fsmonitor: update GIT_TEST_FSMONITOR support
preload-index: use git_env_bool() not getenv() for customization
t/README: correct spelling of "uncommon"
|
|
Various test scripts have been updated for style and also correct
handling of exit status of various commands.
* md/test-cleanup:
tests: order arguments to git-rev-list properly
t9109: don't swallow Git errors upstream of pipes
tests: don't swallow Git errors upstream of pipes
t/*: fix ordering of expected/observed arguments
tests: standardize pipe placement
Documentation: add shell guidelines
t/README: reformat Do, Don't, Keep in mind lists
|
|
Fix various places where the ordering was obviously wrong, meaning it
was easy to find with grep.
Signed-off-by: Matthew DeVore <matvore@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The test framework test-lib.sh itself would want to give warnings
and hints, e.g. when it sees a deprecated environment variable is in
use that we want to encourage users to migrate to another variable.
The self-test of test framework done in t0000 however do not expect
to see these warnings and hints, so depending on the settings of
environment variables, a running test may or may not produce these
messages to the standard error output, breaking the expectations of
self-test test framework does on itself. Here is what we see:
$ TEST_GIT_INDEX_VERSION=4 sh t0000-basic.sh -i -v
...
'err' is not empty, it contains:
warning: TEST_GIT_INDEX_VERSION is now GIT_TEST_INDEX_VERSION
hint: set GIT_TEST_INDEX_VERSION too during the transition period
not ok 5 - pretend we have a fully passing test suite
The following quick attempt to work it around does not work, because
some tests in t0000 do want to see expected errors from the test
framework itself.
t/t0000-basic.sh | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/t/t0000-basic.sh b/t/t0000-basic.sh
index 850f651e4e..88c6ed4696 100755
--- a/t/t0000-basic.sh
+++ b/t/t0000-basic.sh
@@ -88,7 +88,7 @@ _run_sub_test_lib_test_common () {
'
# Point to the t/test-lib.sh, which isn't in ../ as usual
- . "\$TEST_DIRECTORY"/test-lib.sh
+ . "\$TEST_DIRECTORY"/test-lib.sh >/dev/null 2>&1
EOF
cat >>"$name.sh" &&
chmod +x "$name.sh" &&
There are a few possible ways to work this around:
* We could strip the warning: and hint: unconditionally from the
error output before the error messages are checked in the
self-test (helper functions check_sub_test_lib_test_err and
check_sub_test_lib_test); the problem with this approach is that
it will make it impossible to write self-tests to ensure that
right warnings and hints are given.
* We could force a sane environment settings before the test helper
_run_sub_test_lib_test_common dot-sources test-lib.sh; the
problem with this approach is that _run_sub_test_lib_test_common
now needs to be aware of what pairs of environment variables are
checked in test-lib.sh using check_var_migration helper.
The final patch I came up with is probably the solution that is
least bad. Set a variable to tell test-lib.sh that we are running
a self-test, so that various pieces in test-lib.sh can react to keep
the output stable.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Test t0000 tests the "basics of the basics" and as such, checks that we
have various fixed hard-coded object IDs. The tests relying on these
assertions have been marked with the SHA1 prerequisite, as they will
obviously not function in their current form with SHA-256.
Use the test_oid helper to update these assertions and provide values
for both SHA-1 and SHA-256.
These object IDs were synthesized using a set of scripts that created
the objects for both SHA-1 and SHA-256 using the same method to ensure
that they are indeed the correct values.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If the hash we're using is 32 bytes in size, attempting to insert a
20-byte object name won't work. Since these are synthesized objects
that are almost all zeros, look them up in a translation table.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add several test functions to make working with various hash-related
values easier.
Add test_oid_init, which loads common hash-related constants and
placeholder object IDs from the newly added files in t/oid-info.
Provide values for these constants for both SHA-1 and SHA-256.
Add test_oid_cache, which accepts data on standard input in the form of
hash-specific key-value pairs that can be looked up later, using the
same format as the files in t/oid-info. Document this format in a
t/oid-info/README directory so that it's easier to use in the future.
Add test_oid, which is used to specify look up a per-hash value
(produced on standard output) based on the key specified as its
argument. Usually the data to be looked up will be a hash-related
constant (such as the size of the hash in binary or hexadecimal), a
well-known or placeholder object ID (such as the all-zeros object ID or
one consisting of "deadbeef" repeated), or something similar. For these
reasons, test_oid will usually be used within a command substitution.
Consequently, redirect the error output to standard error, since
otherwise it will not be displayed.
Add test_detect_hash, which currently only detects SHA-1, and
test_set_hash, which can be used to set a different hash algorithm for
test purposes. In the future, test_detect_hash will learn to actually
detect the hash depending on how the testsuite is to be run.
Use the local keyword within these functions to avoid overwriting other
shell variables. We have had a test balloon in place for a couple of
releases to catch shells that don't have this keyword and have not
received any reports of failure. Note that the varying usages of local
used here are supported by all common open-source shells supporting the
local keyword.
Test these new functions as part of t0000, which also serves to
demonstrate basic usage of them. In addition, add documentation on how
to format the lookup data and how to use the test functions.
Implement two basic lookup charts, one for common invalid or synthesized
object IDs, and one for various facts about the hash function in use.
Provide versions of the data for both SHA-1 and SHA-256.
Since we use shell variables for storage, names used for lookup can
currently consist only of shell identifier characters. If this is a
problem in the future, we can hash the names before use.
Improved-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Test fixes.
* sg/test-must-be-empty:
tests: use 'test_must_be_empty' instead of 'test_cmp <empty> <out>'
tests: use 'test_must_be_empty' instead of 'test_cmp /dev/null <out>'
tests: use 'test_must_be_empty' instead of 'test ! -s'
tests: use 'test_must_be_empty' instead of '! test -s'
|
|
Using 'test_must_be_empty' is preferable to '! test -s', because it
gives a helpful error message if the given file is unexpectedly not
empty, while the latter remains completely silent. Furthermore, it
also catches cases when the given file unexpectedly does not exist at
all.
This patch was basically created by:
sed -i -e 's/! test -s/test_must_be_empty/' t[0-9]*.sh
with the following notable exceptions:
- The '! test -s' check in '.gitmodules ignore=dirty suppresses
submodules with untracked content' in 't7508-status.sh' is left
as-is, because it's bogus and, therefore, it's subject of a
dedicated patch.
- The '! test -s' checks in 't9131-git-svn-empty-symlink.sh' and
't9135-git-svn-moved-branch-empty-file.sh' are immediately
preceeded by a 'test -f' to ensure that the files exist in the
first place. 'test_must_be_empty' ensures that as well, so those
'test -f' commands are removed as well.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Since this is a core test that tests basic functionality, annotate the
assertions that have dependencies on SHA-1 with the appropriate
prerequisite.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add a test balloon to see if we get complaints from anybody who is
using a shell that doesn't support the "local" keyword. If so, this
test can be reverted. If not, we might want to consider using "local"
in shell code throughout the git code base.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This is a special SHA1. Let's keep it at one place, easier to replace
later when the hash change comes, easier to recognize.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Many instances of duplicate words (e.g. "the the path") and
a few typoes are fixed, originally in multiple patches.
wildmatch: fix duplicate words of "the"
t: fix duplicate words of "output"
transport-helper: fix duplicate words of "read"
Git.pm: fix duplicate words of "return"
path: fix duplicate words of "look"
pack-protocol.txt: fix duplicate words of "the"
precompose-utf8: fix typo of "sequences"
split-index: fix typo
worktree.c: fix typo
remote-ext: fix typo
utf8: fix duplicate words of "the"
git-cvsserver: fix duplicate words
Signed-off-by: Li Peng <lip@dtdream.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
Ævar Arnfjörð Bjarmason
Jeff King
Junio C Hamano
SZEDER Gábor
Elijah Newren
Caleb Tillman
brian m. carlson
Denton Liu
Carlo Marcelo Arenas Belón
Johannes Schindelin
Matthew DeVore
Eric Sunshine
Michael Haggerty
Nguyễn Thái Ngọc Duy
Li Peng