summaryrefslogtreecommitdiff
path: root/t/t0000-basic.sh
AgeCommit message (Collapse)AuthorFilesLines
2017-10-31t0000: check whether the shell supports the "local" keywordLibravatar Michael Haggerty1-0/+25
Add a test balloon to see if we get complaints from anybody who is using a shell that doesn't support the "local" keyword. If so, this test can be reverted. If not, we might want to consider using "local" in shell code throughout the git code base. Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-07-18test-lib.sh: introduce and use $EMPTY_TREELibravatar Nguyễn Thái Ngọc Duy1-1/+1
This is a special SHA1. Let's keep it at one place, easier to replace later when the hash change comes, easier to recognize. Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-05-06typofix: assorted typofixes in comments, documentation and messagesLibravatar Li Peng1-1/+1
Many instances of duplicate words (e.g. "the the path") and a few typoes are fixed, originally in multiple patches. wildmatch: fix duplicate words of "the" t: fix duplicate words of "output" transport-helper: fix duplicate words of "read" Git.pm: fix duplicate words of "return" path: fix duplicate words of "look" pack-protocol.txt: fix duplicate words of "the" precompose-utf8: fix typo of "sequences" split-index: fix typo worktree.c: fix typo remote-ext: fix typo utf8: fix duplicate words of "the" git-cvsserver: fix duplicate words Signed-off-by: Li Peng <lip@dtdream.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-03-20t: fix trivial &&-chain breakageLibravatar Jeff King1-2/+2
These are tests which are missing a link in their &&-chain, but during a setup phase. We may fail to notice failure in commands that build the test environment, but these are typically not expected to fail at all (but it's still good to double-check that our test environment is what we expect). Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-06-06t0000-*.sh: fix the GIT_SKIP_TESTS sub-testsLibravatar Ramsay Jones1-51/+57
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-06-06test-lib: '--run' to run only specific testsLibravatar Ilya Bobyr1-4/+352
Allow better control of the set of tests that will be executed for a single test suite. Mostly useful while debugging or developing as it allows to focus on a specific test. Signed-off-by: Ilya Bobyr <ilya.bobyr@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-06-06test-lib: tests skipped by GIT_SKIP_TESTS say soLibravatar Ilya Bobyr1-0/+63
We used to show "(missing )" next to tests skipped because they are specified in GIT_SKIP_TESTS. Use "(GIT_SKIP_TESTS)" instead. Plus tests that check basic GIT_SKIP_TESTS functions. Signed-off-by: Ilya Bobyr <ilya.bobyr@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-01-02t0000: drop "known breakage" testLibravatar Jeff King1-3/+0
Having a simulated "known breakage" test means that the test suite will always tell us there is a bug to be fixed, even though it is only simulated. The right way to test this is in a sub-test, that can also check that we provide the correct exit status and output. Fortunately, we already have such a test (added much later by 5ebf89e). We could arguably get rid of the simulated success test immediately above, as well, as it is also redundant with the tests added in 5ebf89e. However, it does not have the annoying behavior of the "known breakage" test. It may also be easier to debug if the test suite is truly broken, since it is not a test-within-a-test, as the later tests are. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-01-02t0000: simplify HARNESS_ACTIVE hackLibravatar Jeff King1-9/+5
Commit 517cd55 set HARNESS_ACTIVE unconditionally in sub-tests, because that value affects the output of "--verbose". t0000 needs stable output from its sub-tests, and we may or may not be running under a TAP harness. That commit made the decision to always set the variable, since it has another useful side effect, which is suppressing writes to t/test-results by the sub-tests (which would just pollute the real results). Since the last commit, though, the sub-tests have their own test-results directories, so this is no longer an issue. We can now update a few comments that are no longer accurate nor necessary. We can also revisit the choice of HARNESS_ACTIVE. Since we must choose one value for stability, it's probably saner to have it off. This means that future patches could test things like the test-results writing, or the "--quiet" option, which is currently ignored when run under a harness. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-01-02t0000: set TEST_OUTPUT_DIRECTORY for sub-testsLibravatar Jeff King1-0/+2
Running t0000 produces more trash directories than expected and does not clean up after itself: $ ./t0000-basic.sh [...] $ ls -d trash\ directory.* trash directory.failing-cleanup trash directory.mixed-results1 trash directory.mixed-results2 trash directory.partial-pass trash directory.test-verbose trash directory.test-verbose-only-2 These scratch areas for sub-tests should be under the t0000 trash directory, but because TEST_OUTPUT_DIRECTORY defaults to TEST_DIRECTORY, which is exported to help sub-tests find test-lib.sh, the sub-test trash directories are created under the toplevel t/ directory instead. Because some of the sub-tests simulate failures, their trash directories are kept around. Fix it by explicitly setting TEST_OUTPUT_DIRECTORY appropriately for sub-tests. An alternative fix would be to pass the --root parameter that only specifies where to put the trash directories, which would also work. However, using TEST_OUTPUT_DIRECTORY is more futureproof in case tests want to write more output in addition to the test-results/ (which are already suppressed in sub-tests using the HARNESS_ACTIVE setting) and trash directories. This fixes a regression introduced by 38b074d (t/test-lib.sh: fix TRASH_DIRECTORY handling, 2013-04-14). Before that commit, the TEST_OUTPUT_DIRECTORY setting was not respected consistently so most tests did their work in a "trash" subdirectory of the current directory instead of the output dir. Signed-off-by: Jeff King <peff@peff.net> Clarified-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-07-11Merge branch 'tr/test-v-and-v-subtest-only'Libravatar Junio C Hamano1-1/+2
Finishing touches to a topic that is already in master for the upcoming release. * tr/test-v-and-v-subtest-only: t0000: do not use export X=Y
2013-07-08t0000: do not use export X=YLibravatar Torsten Bögershausen1-1/+2
The shell syntax "export X=Y A=B" is not understood by all shells. Signed-off-by: Torsten Bögershausen <tboegi@web.de> Acked-by: Thomas Rast <trast@inf.ethz.ch> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-07-05Merge branch 'tr/test-v-and-v-subtest-only'Libravatar Junio C Hamano1-1/+60
Allows N instances of tests run in parallel, each running 1/N parts of the test suite under Valgrind, to speed things up. * tr/test-v-and-v-subtest-only: perf-lib: fix start/stop of perf tests test-lib: support running tests under valgrind in parallel test-lib: allow prefixing a custom string before "ok N" etc. test-lib: valgrind for only tests matching a pattern test-lib: verbose mode for only tests matching a pattern test-lib: self-test that --verbose works test-lib: rearrange start/end of test_expect_* and test_skip test-lib: refactor $GIT_SKIP_TESTS matching test-lib: enable MALLOC_* for the actual tests
2013-06-23test-lib: verbose mode for only tests matching a patternLibravatar Thomas Rast1-0/+24
With the new --verbose-only=<pattern> option, one can enable --verbose at a per-test granularity. The pattern is matched against the test number, e.g. ./t0000-basic.sh --verbose-only='2[0-2]' to see only the full output of test 20-22, while showing the rest in the one-liner format. As suggested by Jeff King, this takes care to wrap the entire test_expect_* block, but nothing else, in the verbose toggling. We can use the test_start/end functions from the previous commit for the purpose. This is arguably not *too* useful on its own, but makes the next patch easier to follow. Helped-by: Jeff King <peff@peff.net> Signed-off-by: Thomas Rast <trast@inf.ethz.ch> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-06-23test-lib: self-test that --verbose worksLibravatar Thomas Rast1-1/+36
t0000 contains some light self-tests of test-lib.sh, but --verbose was not covered. Add a test. The only catch is that the presence of a test harness influences the output (specifically, the presence of some empty lines). So we need to unset TEST_HARNESS or set it to a known value. Leaving it unset leads to spurious test failures in the final summary, which come from the subtest. So we always set it. Signed-off-by: Thomas Rast <trast@inf.ethz.ch> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-06-07t0000: use test_ln_s_add to remove SYMLINKS prerequisiteLibravatar Johannes Sixt1-29/+10
t0000-basic hard-codes many object IDs. To cater to file systems that do not support symbolic links, different IDs are used depending on the SYMLINKS prerequisite. But we can observe the symbolic links are only needed to generate index entries. Use test_ln_s_add to generate the index entries and get rid of explicit SYMLINKS checks. This undoes the special casing introduced in this test by 704a3143 (Use prerequisite tags to skip tests that depend on symbolic links, 2009-03-04). Signed-off-by: Johannes Sixt <j6t@kdbg.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-01-03Merge branch 'as/test-tweaks'Libravatar Junio C Hamano1-48/+166
Output from the tests is coloured using "green is okay, yellow is questionable, red is bad and blue is informative" scheme. * as/test-tweaks: tests: paint unexpectedly fixed known breakages in bold red tests: test the test framework more thoroughly tests: refactor mechanics of testing in a sub test-lib tests: change info messages from yellow/brown to cyan tests: paint skipped tests in blue tests: paint known breakages in yellow tests: test number comes first in 'not ok $count - $message'
2012-12-20tests: paint unexpectedly fixed known breakages in bold redLibravatar Adam Spiers1-6/+24
Change color of unexpectedly fixed known breakages to bold red. An unexpectedly passing test indicates that the test code is somehow broken or out of sync with the code it is testing. Either way this is an error which is potentially as bad as a failing test, and as such is no longer portrayed as a pass in the output. Signed-off-by: Adam Spiers <git@adamspiers.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-12-20tests: test the test framework more thoroughlyLibravatar Adam Spiers1-0/+105
Add 5 new full test suite runs each with a different number of passing/failing/broken/fixed tests, in order to ensure that the correct exit code and output are generated in each case. As before, these are run in a subdirectory to avoid disrupting the metrics for the parent tests. Signed-off-by: Adam Spiers <git@adamspiers.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-12-20tests: refactor mechanics of testing in a sub test-libLibravatar Adam Spiers1-45/+40
This will allow us to test the test framework more thoroughly without disrupting the top-level test metrics. Signed-off-by: Adam Spiers <git@adamspiers.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-12-16tests: test number comes first in 'not ok $count - $message'Libravatar Adam Spiers1-2/+2
The old output to say "not ok - 1 messsage" was working by accident only because the test numbers are optional in TAP. Signed-off-by: Adam Spiers <git@adamspiers.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-11-15test-lib: allow negation of prerequisitesLibravatar Jeff King1-0/+32
You can set and test a prerequisite like this: test_set_prereq FOO test_have_prereq FOO && echo yes You can negate the test in the shell like this: ! test_have_prereq && echo no However, when you are using the automatic prerequisite checking in test_expect_*, there is no opportunity to use the shell negation. This patch introduces the syntax "!FOO" to indicate that the test should only run if a prerequisite is not meant. One alternative is to set an explicit negative prerequisite, like: if system_has_foo; then test_set_prereq FOO else test_set_prereq NO_FOO fi However, this doesn't work for lazy prerequisites, which associate a single test with a single name. We could teach the lazy prereq evaluator to set both forms, but the code change ends up quite similar to this one (because we still need to convert NO_FOO into FOO to find the correct lazy script). Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-09-25Merge branch 'rr/test-make-sure-we-have-git'Libravatar Junio C Hamano1-10/+0
Only the first test t0000 in the test suite made sure we have built Git to be tested; move the check to test-lib so that it applies to all tests equally. * rr/test-make-sure-we-have-git: t/test-lib: make sure Git has already been built
2012-09-18t/test-lib: make sure Git has already been builtLibravatar Ramkumar Ramachandra1-10/+0
When tests were run without building git, they stopped with: .: 54: Can't open /path/to/git/source/t/../GIT-BUILD-OPTIONS Move the check that makes sure that git has already been built from t0000 to test-lib, so that any test will do so before it runs. Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-09-06t0060: move tests of real_path() from t0000 to hereLibravatar Michael Haggerty1-18/+0
Suggested by: Johannes Sixt <j6t@kdbg.org> Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-03-02t0000: modernise styleLibravatar Stefano Lattarini1-274/+289
Match the style to more modern test scripts, namely: - Prefer tabs for indentation. - The first line of each test has prereq, title and opening sq for the script body. - Move cleanup or initialization of data used by a test inside the test itself. - Put a newline before the closing sq for each test. - Don't conclude the test descriptions with a full stop. - Prefer 'test_line_count = COUNT FILE' over 'test $(wc -l <FILE) = COUNT' - Prefer 'test_line_count = 0 FILE' over 'cmp -s /dev/null FILE' - Use '<<-EOF' style for here documents, so that they can be indented as well. Bot don't do that in case the resulting lines would be too long. Also when there is no $variable_substitution in the body of a here document, quote \EOF. - Don't redirect the output of commands to /dev/null unconditionally, the git testing framework should already take care of handling test verbosity transparently and uniformly. Signed-off-by: Stefano Lattarini <stefano.lattarini@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-03-17Name make_*_path functions more accuratelyLibravatar Carlos Martín Nieto1-5/+5
Rename the make_*_path functions so it's clearer what they do, in particlar make clear what the differnce between make_absolute_path and make_nonrelative_path is by renaming them real_path and absolute_path respectively. make_relative_path has an understandable name and is renamed to relative_path to maintain the name convention. The function calls have been replaced 1-to-1 in their usage. Signed-off-by: Carlos Martín Nieto <cmn@elego.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-01-13t0000: quote TAP snippets in test codeLibravatar Thomas Rast1-18/+18
t0000 contains two snippets of actual test output. This causes problems when passing -v to the test[*]: the test infrastructure echoes the tests before running them, and the TAP parser then sees this test output and concludes that two tests failed and that the TAP output was badly formatted. Guard against this by quoting the output in the source. [*] either by running 'make smoke' with GIT_TEST_OPTS=-v, or with prove ./t0000-basic.sh :: -v Signed-off-by: Thomas Rast <trast@student.ethz.ch> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-10-06test-lib: make test_expect_code a test commandLibravatar Ævar Arnfjörð Bjarmason1-10/+45
Change test_expect_code to be a normal test command instead of a top-level command. As a top-level command it would fail in cases like: test_expect_code 1 'phoney' ' foo && bar && (exit 1) ' Here the test might incorrectly succeed if "foo" or "bar" happened to fail with exit status 1. Instead we now do: test_expect_success 'phoney' ' foo && bar && test_expect_code 1 "(exit 1)" ' Which will only succeed if "foo" and "bar" return status 0, and "(exit 1)" returns status 1. Note that test_expect_code has been made slightly noisier, as it reports the exit code it receives even upon success. Some test code in t0000-basic.sh relied on the old semantics of test_expect_code to test the test_when_finished command. I've converted that code to use an external test similar to the TODO test I added in v1.7.3-rc0~2^2~3. Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Acked-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-08-31t/t0000-basic.sh: Run the passing TODO test inside its own test-libLibravatar Ævar Arnfjörð Bjarmason1-0/+31
Change the passing TODO test in t0000-basic.sh to run inside its own test-lib.sh. The motivation is to have nothing out of the ordinary on a normal test run for test smoking purposes. If every normal test run has a passing TODO you're more likely to turn a blind eye to it and not to investigate cases where things really are passing unexpectedly. It also makes the prove(1) output less noisy. Before: All tests successful. Test Summary Report ------------------- ./t0000-basic.sh (Wstat: 0 Tests: 46 Failed: 0) TODO passed: 5 Files=484, Tests=6229, 143 wallclock secs ( 4.00 usr 4.15 sys + 104.77 cusr 351.57 csys = 464.49 CPU) Result: PASS And after: All tests successful. Files=484, Tests=6228, 139 wallclock secs ( 4.07 usr 4.25 sys + 104.54 cusr 350.85 csys = 463.71 CPU) Result: PASS Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-08-18test-lib: Multi-prereq support only checked the last prereqLibravatar Ævar Arnfjörð Bjarmason1-1/+5
The support for multiple test prerequisites added by me in "test-lib: Add support for multiple test prerequisites" was broken. The for iterated over each prerequisite and returned true/false within a case statement, but since it missed a return statement only the last prerequisite in the list of prerequisites was ever considered, the rest were ignored. Fix that by changing the test_have_prereq code to something less clever that keeps a count of the total prereqs and the ones we have and compares the count at the end. This comes with the added advantage that it's easy to list the missing prerequisites in the test output, implement that while I'm at it. Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-08-18test-lib: Add support for multiple test prerequisitesLibravatar Ævar Arnfjörð Bjarmason1-0/+17
Change the test_have_prereq function in test-lib.sh to support a comma-separated list of prerequisites. This is useful for tests that need e.g. both POSIXPERM and SANITY. The implementation was stolen from Junio C Hamano and Johannes Sixt, the tests and documentation were not. See the "Tests in Cygwin" thread in May 2009 for the originals: http://thread.gmane.org/gmane.comp.version-control.git/116729/focus=118385 http://thread.gmane.org/gmane.comp.version-control.git/116729/focus=118434 Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-06-21Merge branch 'gv/portable'Libravatar Junio C Hamano1-1/+1
* gv/portable: test-lib: use DIFF definition from GIT-BUILD-OPTIONS build: propagate $DIFF to scripts Makefile: Tru64 portability fix Makefile: HP-UX 10.20 portability fixes Makefile: HPUX11 portability fixes Makefile: SunOS 5.6 portability fix inline declaration does not work on AIX Allow disabling "inline" Some platforms lack socklen_t type Make NO_{INET_NTOP,INET_PTON} configured independently Makefile: some platforms do not have hstrerror anywhere git-compat-util.h: some platforms with mmap() lack MAP_FAILED definition test_cmp: do not use "diff -u" on platforms that lack one fixup: do not unconditionally disable "diff -u" tests: use "test_cmp", not "diff", when verifying the result Do not use "diff" found on PATH while building and installing enums: omit trailing comma for portability Makefile: -lpthread may still be necessary when libc has only pthread stubs Rewrite dynamic structure initializations to runtime assignment Makefile: pass CPPFLAGS through to fllow customization Conflicts: Makefile wt-status.h
2010-05-31tests: use "test_cmp", not "diff", when verifying the resultLibravatar Gary V. Vaughan1-1/+1
In tests, call test_cmp rather than raw diff where possible (i.e. if the output does not go to a pipe), to allow the use of, say, 'cmp' when the default 'diff -u' is not compatible with a vendor diff. When that is not possible, use $DIFF, as set in GIT-BUILD-OPTIONS. Signed-off-by: Gary V. Vaughan <gary@thewrittenword.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-05-06test-lib: some shells do not let $? propagate into an evalLibravatar Jonathan Nieder1-0/+21
In 3bf7886 (test-lib: Let tests specify commands to be run at end of test, 2010-05-02), the git test harness learned to run cleanup commands unconditionally at the end of a test. During each test, the intended cleanup actions are collected in the test_cleanup variable and evaluated. That variable looks something like this: eval_ret=$?; clean_something && (exit "$eval_ret") eval_ret=$?; clean_something_else && (exit "$eval_ret") eval_ret=$?; final_cleanup && (exit "$eval_ret") eval_ret=$? All cleanup actions are run unconditionally but if one of them fails it is properly reported through $eval_ret. On FreeBSD, unfortunately, $? is set at the beginning of an ‘eval’ to 0 instead of the exit status of the previous command. This results in tests using test_expect_code appearing to fail and all others appearing to pass, unless their cleanup fails. Avoid the problem by setting eval_ret before the ‘eval’ begins. Thanks to Jeff King for the explanation. Cc: Jeff King <peff@peff.net> Cc: Johannes Sixt <j6t@kdbg.org> Acked-by: Jeff King <peff@peff.net> Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-03-22Use prerequisite tags to skip tests that depend on symbolic linksLibravatar Johannes Sixt1-12/+31
Many tests depend on that symbolic links work. This introduces a check that sets the prerequisite tag SYMLINKS if the file system supports symbolic links. Since so many tests have to check for this prerequisite, we do the check in test-lib.sh, so that we don't need to repeat the test in many scripts. To check for 'ln -s' failures, you can use a FAT partition on Linux: $ mkdosfs -C git-on-fat 1000000 $ sudo mount -o loop,uid=j6t,gid=users,shortname=winnt git-on-fat /mnt Clone git to /mnt and $ GIT_SKIP_TESTS='t0001.1[34] t0010 t1301 t403[34] t4129.[47] t5701.7 t7701.3 t9100 t9101.26 t9119 t9124.[67] t9200.10 t9600.6' \ make test (These additionally skipped tests depend on POSIX permissions that FAT on Linux does not provide.) Signed-off-by: Johannes Sixt <j6t@kdbg.org>
2009-03-21test-lib: Infrastructure to test and check for prerequisitesLibravatar Johannes Sixt1-0/+15
Some tests can be run only if a particular prerequisite is available. For example, some tests require that an UTF-8 locale is available. Here we introduce functions that are used in this way: 1. Insert code that checks whether the prerequisite is available. If it is, call test_set_prereq with an arbitrary tag name that subsequently can be used to check for the prerequisite: case $LANG in *.utf-8) test_set_prereq UTF8 ;; esac 2. In the calls to test_expect_success pass the tag name: test_expect_success UTF8 '...description...' '...tests...' 3. There is an auxiliary predicate that can be used anywhere to test for a prerequisite explicitly: if test_have_prereq UTF8 then ...code to be skipped if prerequisite is not available... fi Signed-off-by: Johannes Sixt <j6t@kdbg.org>
2009-03-17Tests: use test_cmp instead of diff where possibleLibravatar Miklos Vajna1-4/+4
Several old tests were written before test_cmp was introduced, convert these to test_cmp. If were are at it, fix the order of the arguments where necessary to make expected come first, so the command shows how the test result deviates from the correct output. Signed-off-by: Miklos Vajna <vmiklos@frugalware.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-07-13t/: Use "test_must_fail git" instead of "! git"Libravatar Stephan Beyer1-3/+3
This patch changes every occurrence of "! git" -- with the meaning that a git call has to gracefully fail -- into "test_must_fail git". This is useful to - make sure the test does not fail because of a signal, e.g. SIGSEGV, and - advertise the use of "test_must_fail" for new tests. Signed-off-by: Stephan Beyer <s-beyer@gmx.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-05-23Fold test-absolute-path into test-path-utilsLibravatar David Reiss1-4/+4
Signed-off-by: David Reiss <dreiss@facebook.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-05-05Fix tests breaking when checkout path contains shell metacharactersLibravatar Bryan Donlan1-2/+2
This fixes the remainder of the issues where the test script itself is at fault for failing when the git checkout path contains whitespace or other shell metacharacters. The majority of git svn tests used the idiom test_expect_success "title" "test script using $svnrepo" These were changed to have the test script in single-quotes: test_expect_success "title" 'test script using "$svnrepo"' which unfortunately makes the patch appear larger than it really is. One consequence of this change is that in the verbose test output the value of $svnrepo (and in some cases other variables, too) is no longer expanded, i.e. previously we saw * expecting success: test script using /path/to/git/t/trash/svnrepo but now it is: * expecting success: test script using "$svnrepo" Signed-off-by: Bryan Donlan <bdonlan@fushizen.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-03-02Fix make_absolute_path() for parameters without a slashLibravatar Johannes Schindelin1-0/+2
When passing "xyz" to make_absolute_path(), make_absolute_path() erroneously tried to chdir("xyz"), and then append "/xyz". Instead, skip the chdir() completely when no slash was found. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-02-11Merge branch 'lt/in-core-index'Libravatar Junio C Hamano1-0/+20
* lt/in-core-index: lazy index hashing Create pathname-based hash-table lookup into index read-cache.c: introduce is_racy_timestamp() helper read-cache.c: fix a couple more CE_REMOVE conversion Also use unpack_trees() in do_diff_cache() Make run_diff_index() use unpack_trees(), not read_tree() Avoid running lstat(2) on the same cache entry. index: be careful when handling long names Make on-disk index representation separate from in-core one
2008-02-01Sane use of test_expect_failureLibravatar Junio C Hamano1-9/+21
Originally, test_expect_failure was designed to be the opposite of test_expect_success, but this was a bad decision. Most tests run a series of commands that leads to the single command that needs to be tested, like this: test_expect_{success,failure} 'test title' ' setup1 && setup2 && setup3 && what is to be tested ' And expecting a failure exit from the whole sequence misses the point of writing tests. Your setup$N that are supposed to succeed may have failed without even reaching what you are trying to test. The only valid use of test_expect_failure is to check a trivial single command that is expected to fail, which is a minority in tests of Porcelain-ish commands. This large-ish patch rewrites all uses of test_expect_failure to use test_expect_success and rewrites the condition of what is tested, like this: test_expect_success 'test title' ' setup1 && setup2 && setup3 && ! this command should fail ' test_expect_failure is redefined to serve as a reminder that that test *should* succeed but due to a known breakage in git it currently does not pass. So if git-foo command should create a file 'bar' but you discovered a bug that it doesn't, you can write a test like this: test_expect_failure 'git-foo should create bar' ' rm -f bar && git foo && test -f bar ' This construct acts similar to test_expect_success, but instead of reporting "ok/FAIL" like test_expect_success does, the outcome is reported as "FIXED/still broken". Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-01-21index: be careful when handling long namesLibravatar Junio C Hamano1-0/+20
We currently use lower 12-bit (masked with CE_NAMEMASK) in the ce_flags field to store the length of the name in cache_entry, without checking the length parameter given to create_ce_flags(). This can make us store incorrect length. Currently we are mostly protected by the fact that many codepaths first copy the path in a variable of size PATH_MAX, which typically is 4096 that happens to match the limit, but that feels like a bug waiting to happen. Besides, that would not allow us to shorten the width of CE_NAMEMASK to use the bits for new flags. This redefines the meaning of the name length stored in the cache_entry. A name that does not fit is represented by storing CE_NAMEMASK in the field, and the actual length needs to be computed by actually counting the bytes in the name[] field. This way, only the unusually long paths need to suffer. Signed-off-by: Junio C Hamano <gitster@pobox.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-08-01Add is_absolute_path() and make_absolute_path()Libravatar Johannes Schindelin1-0/+16
This patch adds convenience functions to work with absolute paths. The function is_absolute_path() should help the efforts to integrate the MinGW fork. Note that make_absolute_path() returns a pointer to a static buffer. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-07-02Rewrite "git-frotz" to "git frotz"Libravatar Junio C Hamano1-52/+52
This uses the remove-dashes target to replace "git-frotz" to "git frotz". Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-06-07War on whitespaceLibravatar Junio C Hamano1-1/+1
This uses "git-apply --whitespace=strip" to fix whitespace errors that have crept in to our source files over time. There are a few files that need to have trailing whitespaces (most notably, test vectors). The results still passes the test, and build result in Documentation/ area is unchanged. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2007-01-12use 'init' instead of 'init-db' for shipped docs and toolsLibravatar Nicolas Pitre1-2/+2
While 'init-db' still is and probably will always remain a valid git command for obvious backward compatibility reasons, it would be a good idea to move shipped tools and docs to using 'init' instead. Signed-off-by: Nicolas Pitre <nico@cam.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-12-17Fix check_file_directory_conflict().Libravatar Junio C Hamano1-0/+9
When replacing an existing file A with a directory A that has a file A/B in it in the index, 'update-index --replace --add A/B' did not properly remove the file to make room for the new directory. There was a trivial logic error, most likely a cut & paste one, dating back to quite early days of git. Signed-off-by: Junio C Hamano <junkio@cox.net>