| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
When passing an option '--foo' that it does not recognize, the
aggregate.perl script should die with an helpful error message
like:
Unknown option: foo
./aggregate.perl [options] [--] [<dir_or_rev>...] [--] \
[<test_script>...] >
Options:
--codespeed * Format output for Codespeed
--reponame <str> * Send given reponame to codespeed
--sort-by <str> * Sort output (only "regression" \
criteria is supported)
rather than:
fatal: Needed a single revision
rev-parse --verify --foo: command returned error: 128
To implement that let's use Getopt::Long for option parsing
instead of the current manual and sloppy parsing. This should
save some code and make option parsing simpler, tighter and
safer.
This will avoid something like 'foo--sort-by=regression' to
be handled as if '--sort-by=regression' had been used, for
example.
As Getopt::Long eats '--' at the end of options, this changes
a bit the way '--' is handled as we can now have '--' both
after the options and before the scripts.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Performance measuring framework in t/perf learned to help bisecting
performance regressions.
* cc/perf-bisect:
t/perf: add scripts to bisect performance regressions
perf/run: add --subsection option
|
|
The new bisect_regression script can be used to automatically bisect
performance regressions. It will pass the new bisect_run_script to
`git bisect run`.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This new option makes it possible to run perf tests as defined
in only one subsection of a config file.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Small test-helper programs have been consolidated into a single
binary.
* nd/combined-test-helper: (36 commits)
t/helper: merge test-write-cache into test-tool
t/helper: merge test-wildmatch into test-tool
t/helper: merge test-urlmatch-normalization into test-tool
t/helper: merge test-subprocess into test-tool
t/helper: merge test-submodule-config into test-tool
t/helper: merge test-string-list into test-tool
t/helper: merge test-strcmp-offset into test-tool
t/helper: merge test-sigchain into test-tool
t/helper: merge test-sha1-array into test-tool
t/helper: merge test-scrap-cache-tree into test-tool
t/helper: merge test-run-command into test-tool
t/helper: merge test-revision-walking into test-tool
t/helper: merge test-regex into test-tool
t/helper: merge test-ref-store into test-tool
t/helper: merge test-read-cache into test-tool
t/helper: merge test-prio-queue into test-tool
t/helper: merge test-path-utils into test-tool
t/helper: merge test-online-cpus into test-tool
t/helper: merge test-mktemp into test-tool
t/helper: merge (unused) test-mergesort into test-tool
...
|
|
One of the most interesting thing one can be interested in when
looking at performance test results is possible performance
regressions.
This new option makes it easy to spot such possible regressions.
This new option is named '--sort-by=regression' to make it
possible and easy to add other ways to sort the results, like for
example '--sort-by=utime'.
If we would like to sort according to how much the stime regressed
we could also add a new option called '--sort-by=regression:stime'.
Then '--sort-by=regression' could become a synonym for
'--sort-by=regression:rtime'.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This new helper function will be reused in a subsequent
commit.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
9ba95ed23c (perf/run: update get_var_from_env_or_config() for
subsections) stopped setting a default value for GIT_PERF_REPEAT_COUNT
if no perf config file is present, because get_var_from_env_or_config
returns early in that case.
Fix it by setting the default value after calling this function. Its
fifth parameter is not used for any other variable, so remove the
associated code.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"make perf" enhancement.
* cc/perf-aggregate:
perf/aggregate: sort JSON fields in output
perf/aggregate: add --reponame option
perf/aggregate: add --subsection option
|
|
The build procedure for perl/ part has been greatly simplified by
weaning ourselves off of MakeMaker.
* ab/simplify-perl-makefile:
perl: treat PERLLIB_EXTRA as an extra path again
perl: avoid *.pmc and fix Error.pm further
Makefile: replace perl/Makefile.PL with simple make rules
|
|
It is much easier to diff the output against a previous
one when the fields are sorted.
Helped-by: Philip Oakley <philipoakley@iee.org>
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This makes it easier to use the aggregate script
on the command line when one wants to get the
"environment" fields set in the codespeed output.
Previously setting GIT_REPO_NAME was needed
for this purpose.
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This makes it easier to use the aggregate script
on the command line, to get results from
subsections.
Previously setting GIT_PERF_SUBSECTION was needed
for this purpose.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"perf" test output can be sent to codespeed server.
* cc/codespeed:
perf/run: read GIT_PERF_REPO_NAME from perf.repoName
perf/run: learn to send output to codespeed server
perf/run: learn about perf.codespeedOutput
perf/run: add conf_opts argument to get_var_from_env_or_config()
perf/aggregate: implement codespeed JSON output
perf/aggregate: refactor printing results
perf/aggregate: fix checking ENV{GIT_PERF_SUBSECTION}
|
|
The GIT_PERF_REPO_NAME env variable is used in
the `aggregate.perl` script to set the 'environment'
field in the JSON Codespeed output.
Let's make it easy to set this variable by setting it
in a config file.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Let's make it possible to set in a config file the URL of
a codespeed server. And then let's make the `run` script
send the perf test results to this URL at the end of the
tests.
This should make is possible to easily automate the process
of running perf tests and having their results available in
Codespeed.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Let's make it possible to set in a config file the output
format (regular or codespeed) of the perf tests.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Let's make it possible to use `git config` type specifiers like
`--int` or `--bool`, so that config values are converted to the
canonical form and easier to use.
This additional argument is now the fourth argument of
get_var_from_env_or_config() instead of the fifth because we
want the default value argument to be unset if it is not
passed, and this is simpler if it is the last argument.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Codespeed (https://github.com/tobami/codespeed/) is an open source
project that can be used to track how some software performs over
time. It stores performance test results in a database and can show
nice graphs and charts on a web interface.
As it can be interesting to use Codespeed to see how Git performance
evolves over time and releases, let's implement a Codespeed output
in "perf/aggregate.perl".
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
As we want to implement another kind of output than
the current output for the perf test results, let's
refactor the existing code that outputs the results
in its own print_default_results() function.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The way we check ENV{GIT_PERF_SUBSECTION} could trigger
comparison between undef and "" that may be flagged by
use of strict & warnings. Let's fix that.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Ever since 5b594f457a ("Threaded grep", 2010-01-25) the number of
threads git-grep uses under PTHREADS has been hardcoded to 8, but
there's no performance test to check whether this is an optimal
setting.
Amend the existing tests for the grep engines to support a mode where
this can be tested, e.g.:
GIT_PERF_GREP_THREADS='1 8 16' GIT_PERF_LARGE_REPO=~/g/linux ./run p782*
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Test fix.
* bp/fsmonitor:
p7519: improve check for prerequisite WATCHMAN
|
|
The return code of command -v with a non-existing command is 1 in bash
and 127 in dash. Use that return code directly to allow the script to
work with dash and without watchman (e.g. on Debian).
While at it stop redirecting the output. stderr is redirected to
/dev/null by test_lazy_prereq already, and stdout can actually be
useful -- the path of the found watchman executable is sent there, but
it's shown only if the script was run with --verbose.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Acked-by: Ben Peart <benpeart@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The code to iterate over loose object files got optimized.
* ds/for-each-file-in-obj-micro-optim:
sha1_file: use strbuf_add() instead of strbuf_addf()
|
|
Replace the perl/Makefile.PL and the fallback perl/Makefile used under
NO_PERL_MAKEMAKER=NoThanks with a much simpler implementation heavily
inspired by how the i18n infrastructure's build process works[1].
The reason for having the Makefile.PL in the first place is that it
was initially[2] building a perl C binding to interface with libgit,
this functionality, that was removed[3] before Git.pm ever made it to
the master branch.
We've since since started maintaining a fallback perl/Makefile, as
MakeMaker wouldn't work on some platforms[4]. That's just the tip of
the iceberg. We have the PM.stamp hack in the top-level Makefile[5] to
detect whether we need to regenerate the perl/perl.mak, which I fixed
just recently to deal with issues like the perl version changing from
under us[6].
There is absolutely no reason for why this needs to be so complex
anymore. All we're getting out of this elaborate Rube Goldberg machine
was copying perl/* to perl/blib/* as we do a string-replacement on
the *.pm files to hardcode @@LOCALEDIR@@ in the source, as well as
pod2man-ing Git.pm & friends.
So replace the whole thing with something that's pretty much a copy of
how we generate po/build/**.mo from po/*.po, just with a small sed(1)
command instead of msgfmt. As that's being done rename the files
from *.pm to *.pmc just to indicate that they're generated (see
"perldoc -f require").
While I'm at it, change the fallback for Error.pm from being something
where we'll ship our own Error.pm if one doesn't exist at build time
to one where we just use a Git::Error wrapper that'll always prefer
the system-wide Error.pm, only falling back to our own copy if it
really doesn't exist at runtime. It's now shipped as
Git::FromCPAN::Error, making it easy to add other modules to
Git::FromCPAN::* in the future if that's needed.
Functional changes:
* This will not always install into perl's idea of its global
"installsitelib". This only potentially matters for packagers that
need to expose Git.pm for non-git use, and as explained in the
INSTALL file there's a trivial workaround.
* The scripts themselves will 'use lib' the target directory, but if
INSTLIBDIR is set it overrides it. It doesn't have to be this way,
it could be set in addition to INSTLIBDIR, but my reading of [7] is
that this is the desired behavior.
* We don't build man pages for all of the perl modules as we used to,
only Git(3pm). As discussed on-list[8] that we were building
installed manpages for purely internal APIs like Git::I18N or
private-Error.pm was always a bug anyway, and all the Git::SVN::*
ones say they're internal APIs.
There are apparently external users of Git.pm, but I don't expect
there to be any of the others.
As a side-effect of these general changes the perl documentation
now only installed by install-{doc,man}, not a mere "install" as
before.
1. 5e9637c629 ("i18n: add infrastructure for translating Git with
gettext", 2011-11-18)
2. b1edc53d06 ("Introduce Git.pm (v4)", 2006-06-24)
3. 18b0fc1ce1 ("Git.pm: Kill Git.xs for now", 2006-09-23)
4. f848718a69 ("Make perl/ build procedure ActiveState friendly.",
2006-12-04)
5. ee9be06770 ("perl: detect new files in MakeMaker builds",
2012-07-27)
6. c59c4939c2 ("perl: regenerate perl.mak if perl -V changes",
2017-03-29)
7. 0386dd37b1 ("Makefile: add PERLLIB_EXTRA variable that adds to
default perl path", 2013-11-15)
8. 87bmjjv1pu.fsf@evledraar.booking.com ("Re: [PATCH] Makefile:
replace perl/Makefile.PL with simple make rules"
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Internaly we use 0{40} as a placeholder object name to signal the
codepath that there is no such object (e.g. the fast-forward check
while "git fetch" stores a new remote-tracking ref says "we know
there is no 'old' thing pointed at by the ref, as we are creating
it anew" by passing 0{40} for the 'old' side), and expect that a
codepath to locate an in-core object to return NULL as a sign that
the object does not exist. A look-up for an object that does not
exist however is quite costly with a repository with large number
of packfiles. This access pattern has been optimized.
* jk/fewer-pack-rescan:
sha1_file: fast-path null sha1 as a missing object
everything_local: use "quick" object existence check
p5551: add a script to test fetch pack-dir rescans
t/perf/lib-pack: use fast-import checkpoint to create packs
p5550: factor out nonsense-pack creation
|
|
* cc/perf-run-config:
perf: store subsection results in "test-results/$GIT_PERF_SUBSECTION/"
perf/run: show name of rev being built
perf/run: add run_subsection()
perf/run: update get_var_from_env_or_config() for subsections
perf/run: add get_subsections()
perf/run: add calls to get_var_from_env_or_config()
perf/run: add GIT_PERF_DIRS_OR_REVS
perf/run: add get_var_from_env_or_config()
perf/run: add '--config' option to the 'run' script
|
|
Replace use of strbuf_addf() with strbuf_add() when enumerating
loose objects in for_each_file_in_obj_subdir(). Since we already
check the length and hex-values of the string before consuming
the path, we can prevent extra computation by using the lower-
level method.
One consumer of for_each_file_in_obj_subdir() is the abbreviation
code. OID abbreviations use a cached list of loose objects (per
object subdirectory) to make repeated queries fast, but there is
significant cache load time when there are many loose objects.
Most repositories do not have many loose objects before repacking,
but in the GVFS case the repos can grow to have millions of loose
objects. Profiling 'git log' performance in GitForWindows on a
GVFS-enabled repo with ~2.5 million loose objects revealed 12% of
the CPU time was spent in strbuf_addf().
Add a new performance test to p4211-line-log.sh that is more
sensitive to this cache-loading. By limiting to 1000 commits, we
more closely resemble user wait time when reading history into a
pager.
For a copy of the Linux repo with two ~512 MB packfiles and ~572K
loose objects, running 'git log --oneline --parents --raw -1000'
had the following performance:
HEAD~1 HEAD
----------------------------------------
7.70(7.15+0.54) 7.44(7.09+0.29) -3.4%
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We learned to talk to watchman to speed up "git status" and other
operations that need to see which paths have been modified.
* bp/fsmonitor:
fsmonitor: preserve utf8 filenames in fsmonitor-watchman log
fsmonitor: read entirety of watchman output
fsmonitor: MINGW support for watchman integration
fsmonitor: add a performance test
fsmonitor: add a sample integration script for Watchman
fsmonitor: add test cases for fsmonitor extension
split-index: disable the fsmonitor extension when running the split index test
fsmonitor: add a test tool to dump the index extension
update-index: add fsmonitor support to update-index
ls-files: Add support in ls-files to display the fsmonitor valid bit
fsmonitor: add documentation for the fsmonitor extension.
fsmonitor: teach git to optionally utilize a file system monitor to speed up detecting new or changed files.
update-index: add a new --force-write-index option
preload-index: add override to enable testing preload-index
bswap: add 64 bit endianness helper get_be64
|
|
Since fetch often deals with object-ids we don't have (yet),
it's an easy mistake for it to use a function like
parse_object() that gives the correct result (e.g., NULL)
but does so very slowly (because after failing to find the
object, we re-scan the pack directory looking for new
packs).
The regular test suite won't catch this because the end
result is correct, but we would want to know about
performance regressions, too. Let's add a test to the
regression suite.
Note that this uses a synthetic repository that has a large
number of packs. That's not ideal, as it means we're not
testing what "normal" users see (in fact, some of these
problems have existed for ages without anybody noticing
simply because a rescan on a normal repository just isn't
that expensive).
So what we're really looking for here is the spike you'd
notice in a pathological case (a lot of unknown objects
coming into a repo with a lot of packs). If that's fast,
then the normal cases should be, too.
Note that the test also makes liberal use of $MODERN_GIT for
setup; some of these regressions go back a ways, and we
should be able to use it to find the problems there.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We currently use fast-import only to create a large number
of objects, and then run O(n) invocations of pack-objects to
turn them into packs.
We can do this faster by just asking fast-import to
checkpoint and create a pack for each (after telling it
not to turn loose tiny packs).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We have a function to create a bunch of irrelevant packs to
measure the expense of reprepare_packed_git(). Let's make
that available to other perf scripts.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add a new perf test for testing the performance of log while computing
OID abbreviations. Using --oneline --raw and --parents options maximizes
the number of OIDs to abbreviate while still spending some time computing
diffs.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add a test utility (test-drop-caches) that flushes all changes to disk
then drops file system cache on Windows, Linux, and OSX.
Add a perf test (p7519-fsmonitor.sh) for fsmonitor.
By default, the performance test will utilize the Watchman file system
monitor if it is installed. If Watchman is not installed, it will use a
dummy integration script that does not report any new or modified files.
The dummy script has very little overhead which provides optimistic results.
The performance test will also use the untracked cache feature if it is
available as fsmonitor uses it to speed up scanning for untracked files.
There are 4 environment variables that can be used to alter the default
behavior of the performance test:
GIT_PERF_7519_UNTRACKED_CACHE: used to configure core.untrackedCache
GIT_PERF_7519_SPLIT_INDEX: used to configure core.splitIndex
GIT_PERF_7519_FSMONITOR: used to configure core.fsmonitor
GIT_PERF_7519_DROP_CACHE: if set, the OS caches are dropped between tests
The big win for using fsmonitor is the elimination of the need to scan the
working directory looking for changed and untracked files. If the file
information is all cached in RAM, the benefits are reduced.
Signed-off-by: Ben Peart <benpeart@microsoft.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When tests are run for a subsection defined in a config file, it is
better if the results for the current subsection are not overwritting
the results of a previous subsection.
So let's store the results for a subsection in a subdirectory of
"test-results/" with the subsection name.
The aggregate.perl, when it is run for a subsection, should then
aggregate the results found in "test-results/$GIT_PERF_SUBSECTION/".
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
It is nice for the user to not just show the sha1 of the
current revision being built but also the actual name of
this revision.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Let's actually use the subsections we find in the config file
to run the perf tests separately for each subsection.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
As we will set some config options in subsections, let's
teach get_var_from_env_or_config() to get the config options
from the subsections if they are set there.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This function makes it possible to find subsections, so that
we will be able to run different tests for different subsections
in a later commit.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
These calls make it possible to have the make command or the
make options in a config file, instead of in environment
variables.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This environment variable can be set to some revisions or
directories whose Git versions should be tested, in addition
to the revisions or directories passed as arguments to the
'run' script.
This enables a "perf.dirsOrRevs" configuration variable to
be used to set revisions or directories whose Git versions
should be tested.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add get_var_from_env_or_config() to easily set variables
from a config file if they are defined there and not already set.
This can also set them to a default value if one is provided.
As an example, use this function to set GIT_PERF_REPEAT_COUNT
from the perf.repeatCount config option or from the default
value.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
It is error prone and tiring to use many long environment
variables to give parameters to the 'run' script.
Let's make it easy to store some parameters in a config
file and to pass them to the run script.
The GIT_PERF_CONFIG_FILE variable will be set to the
argument of the '--config' option. This variable is not
used yet. It will be used in a following commit.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A performance test for writing the index to be able to
determine if changes to allocating ondisk structure help.
Signed-off-by: Kevin Willford <kewillf@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
Christian Couder
Junio C Hamano
Nguyễn Thái Ngọc Duy
René Scharfe
Ævar Arnfjörð Bjarmason
Derrick Stolee
Jeff King
Ben Peart
Christian Couder
Kevin Willford