| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
"git filter-branch --prune-empty" drops a single-parent commit that
becomes a no-op, but did not drop a root commit whose tree is empty.
* dp/filter-branch-prune-empty:
p7000: add test for filter-branch with --prune-empty
filter-branch: fix --prune-empty on parentless commits
t7003: ensure --prune-empty removes entire branch when applicable
t7003: ensure --prune-empty can prune root commit
|
|
Signed-off-by: Devin J. Pohly <djpohly@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
It's tempting to say:
./run v1.0.0 HEAD
to see how we've sped up Git over the years. Unfortunately,
this doesn't quite work because versions of Git prior to
v1.7.0 lack bin-wrappers, so our "run" script doesn't
correctly put them in the PATH.
Worse, it means we silently find whatever other "git" is in
the PATH, and produce test results that have no bearing on
what we asked for.
Let's fallback to the main git directory when bin-wrappers
isn't present. Many modern perf scripts won't run with such
an antique version of Git, of course, but at least those
failures are detected and reported (and you're free to write
a limited perf script that works across many versions).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Since 1a0962dee (t/perf: fix regression in testing older
versions of git, 2016-06-22), we point "$MODERN_GIT" to a
copy of git that matches the t/perf script itself, and which
can be used for tasks outside of the actual timings. This is
needed because the setup done by perf scripts keeps moving
forward in time, and may use features that the older
versions of git we are testing do not have.
That commit used $MODERN_GIT to fix a case where we relied
on the relatively recent --git-path option. But if you go
back further still, there are more problems.
Since 7501b5921 (perf: make the tests work in worktrees,
2016-05-13), we use "git -C", but versions of git older than
44e1e4d67 (git: run in a directory given with -C option,
2013-09-09) don't know about "-C". So testing an old version
of git with a new version of t/perf will fail the setup
step.
We can fix this by using $MODERN_GIT during the setup;
there's no need to use the antique version, since it doesn't
affect the timings. Likewise, we'll adjust the "init"
invocation; antique versions of git called this "init-db".
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In p0001, a variable was created in a test_expect_success block to be
used in later test_perf blocks, but was not exported. This caused the
variable to not appear in those blocks (this can be verified by writing
'test -n "$commit"' in those blocks), resulting in a slightly different
invocation than what was intended. Export that variable.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Adjust a perf test to new world order where commands that do
require a repository are really strict about having a repository.
* rs/p5302-create-repositories-before-tests:
p5302: create repositories for index-pack results explicitly
|
|
Before 7176a314 (index-pack: complain when --stdin is used outside of a
repo) index-pack silently created a non-existing target directory; now
the command refuses to work unless it's used against a valid repository.
That causes p5302 to fail, which relies on the former behavior. Fix it
by setting up the destinations for its performance tests using git init.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add a sort command to test-string-list that reads lines from stdin,
stores them in a string_list and then sorts it. Use it in a simple
perf test script to measure the performance of string_list_sort().
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When fetching from a remote that has many tags that are irrelevant
to branches we are following, we used to waste way too many cycles
when checking if the object pointed at by a tag (that we are not
going to fetch!) exists in our repository too carefully.
* jk/fetch-quick-tag-following:
fetch: use "quick" has_sha1_file for tag following
|
|
When we auto-follow tags in a fetch, we look at all of the
tags advertised by the remote and fetch ones where we don't
already have the tag, but we do have the object it peels to.
This involves a lot of calls to has_sha1_file(), some of
which we can reasonably expect to fail. Since 45e8a74
(has_sha1_file: re-check pack directory before giving up,
2013-08-30), this may cause many calls to
reprepare_packed_git(), which is potentially expensive.
This has gone unnoticed for several years because it
requires a fairly unique setup to matter:
1. You need to have a lot of packs on the client side to
make reprepare_packed_git() expensive (the most
expensive part is finding duplicates in an unsorted
list, which is currently quadratic).
2. You need a large number of tag refs on the server side
that are candidates for auto-following (i.e., that the
client doesn't have). Each one triggers a re-read of
the pack directory.
3. Under normal circumstances, the client would
auto-follow those tags and after one large fetch, (2)
would no longer be true. But if those tags point to
history which is disconnected from what the client
otherwise fetches, then it will never auto-follow, and
those candidates will impact it on every fetch.
So when all three are true, each fetch pays an extra
O(nr_tags * nr_packs^2) cost, mostly in string comparisons
on the pack names. This was exacerbated by 47bf4b0
(prepare_packed_git_one: refactor duplicate-pack check,
2014-06-30) which uses a slightly more expensive string
check, under the assumption that the duplicate check doesn't
happen very often (and it shouldn't; the real problem here
is how often we are calling reprepare_packed_git()).
This patch teaches fetch to use HAS_SHA1_QUICK to sacrifice
accuracy for speed, in cases where we might be racy with a
simultaneous repack. This is similar to the fix in 0eeb077
(index-pack: avoid excessive re-reading of pack directory,
2015-06-09). As with that case, it's OK for has_sha1_file()
occasionally say "no I don't have it" when we do, because
the worst case is not a corruption, but simply that we may
fail to auto-follow a tag that points to it.
Here are results from the included perf script, which sets
up a situation similar to the one described above:
Test HEAD^ HEAD
----------------------------------------------------------
5550.4: fetch 11.21(10.42+0.78) 0.08(0.04+0.02) -99.3%
Reported-by: Vegard Nossum <vegard.nossum@oracle.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Performance tests done via "t/perf" did not use the same set of
build configuration if the user relied on autoconf generated
configuration.
* ks/perf-build-with-autoconf:
t/perf/run: copy config.mak.autogen & friends to build area
|
|
Some codepaths in "git pack-objects" were not ready to use an
existing pack bitmap; now they are and as the result they have
become faster.
* ks/pack-objects-bitmap:
pack-objects: use reachability bitmap index when generating non-stdout pack
pack-objects: respect --local/--honor-pack-keep/--incremental when bitmap is in use
|
|
Otherwise for people who use autotools-based configure in main worktree,
the performance testing results will be inconsistent as work and build
trees could be using e.g. different optimization levels.
See e.g.
http://public-inbox.org/git/20160818175222.bmm3ivjheokf2qzl@sigill.intra.peff.net/
for example.
NOTE config.status has to be copied because otherwise without it the build
would want to run reconfigure this way loosing just copied config.mak.autogen.
Signed-off-by: Kirill Smelkov <kirr@nexedi.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Starting from 6b8fda2d (pack-objects: use bitmaps when packing objects)
if a repository has bitmap index, pack-objects can nicely speedup
"Counting objects" graph traversal phase. That however was done only for
case when resultant pack is sent to stdout, not written into a file.
The reason here is for on-disk repack by default we want:
- to produce good pack (with bitmap index not-yet-packed objects are
emitted to pack in suboptimal order).
- to use more robust pack-generation codepath (avoiding possible
bugs in bitmap code and possible bitmap index corruption).
Jeff King further explains:
The reason for this split is that pack-objects tries to determine how
"careful" it should be based on whether we are packing to disk or to
stdout. Packing to disk implies "git repack", and that we will likely
delete the old packs after finishing. We want to be more careful (so
as not to carry forward a corruption, and to generate a more optimal
pack), and we presumably run less frequently and can afford extra CPU.
Whereas packing to stdout implies serving a remote via "git fetch" or
"git push". This happens more frequently (e.g., a server handling many
fetching clients), and we assume the receiving end takes more
responsibility for verifying the data.
But this isn't always the case. One might want to generate on-disk
packfiles for a specialized object transfer. Just using "--stdout" and
writing to a file is not optimal, as it will not generate the matching
pack index.
So it would be useful to have some way of overriding this heuristic:
to tell pack-objects that even though it should generate on-disk
files, it is still OK to use the reachability bitmaps to do the
traversal.
So we can teach pack-objects to use bitmap index for initial object
counting phase when generating resultant pack file too:
- if we take care to not let it be activated under git-repack:
See above about repack robustness and not forward-carrying corruption.
- if we know bitmap index generation is not enabled for resultant pack:
The current code has singleton bitmap_git, so it cannot work
simultaneously with two bitmap indices.
We also want to avoid (at least with current implementation)
generating bitmaps off of bitmaps. The reason here is: when generating
a pack, not-yet-packed objects will be emitted into pack in
suboptimal order and added to tail of the bitmap as "extended entries".
When the resultant pack + some new objects in associated repository
are in turn used to generate another pack with bitmap, the situation
repeats: new objects are again not emitted optimally and just added to
bitmap tail - not in recency order.
So the pack badness can grow over time when at each step we have
bitmapped pack + some other objects. That's why we want to avoid
generating bitmaps off of bitmaps, not to let pack badness grow.
- if we keep pack reuse enabled still only for "send-to-stdout" case:
Because pack-to-file needs to generate index for destination pack, and
currently on pack reuse raw entries are directly written out to the
destination pack by write_reused_pack(), bypassing needed for pack index
generation bookkeeping done by regular codepath in write_one() and
friends.
( In the future we might teach pack-reuse code about cases when index
also needs to be generated for resultant pack and remove
pack-reuse-only-for-stdout limitation )
This way for pack-objects -> file we get nice speedup:
erp5.git[1] (~230MB) extracted from ~ 5GB lab.nexedi.com backup
repository managed by git-backup[2] via
time echo 0186ac99 | git pack-objects --revs erp5pack
before: 37.2s
after: 26.2s
And for `git repack -adb` packed git.git
time echo 5c589a73 | git pack-objects --revs gitpack
before: 7.1s
after: 3.6s
i.e. it can be 30% - 50% speedup for pack extraction.
git-backup extracts many packs on repositories restoration. That was my
initial motivation for the patch.
[1] https://lab.nexedi.com/nexedi/erp5
[2] https://lab.nexedi.com/kirr/git-backup
NOTE
Jeff also suggests that pack.useBitmaps was probably a mistake to
introduce originally. This way we are not adding another config point,
but instead just always default to-file pack-objects not to use bitmap
index: Tools which need to generate on-disk packs with using bitmap, can
pass --use-bitmap-index explicitly. And git-repack does never pass
--use-bitmap-index, so this way we can be sure regular on-disk repacking
remains robust.
NOTE2
`git pack-objects --stdout >file.pack` + `git index-pack file.pack` is much slower
than `git pack-objects file.pack`. Extracting erp5.git pack from
lab.nexedi.com backup repository:
$ time echo 0186ac99 | git pack-objects --stdout --revs >erp5pack-stdout.pack
real 0m22.309s
user 0m21.148s
sys 0m0.932s
$ time git index-pack erp5pack-stdout.pack
real 0m50.873s <-- more than 2 times slower than time to generate pack itself!
user 0m49.300s
sys 0m1.360s
So the time for
`pack-object --stdout >file.pack` + `index-pack file.pack` is 72s,
while
`pack-objects file.pack` which does both pack and index is 27s.
And even
`pack-objects --no-use-bitmap-index file.pack` is 37s.
Jeff explains:
The packfile does not carry the sha1 of the objects. A receiving
index-pack has to compute them itself, including inflating and applying
all of the deltas.
that's why for `git-backup restore` we want to teach `git pack-objects
file.pack` to use bitmaps instead of using `git pack-objects --stdout
>file.pack` + `git index-pack file.pack`.
NOTE3
The speedup is now tracked via t/perf/p5310-pack-bitmaps.sh
Test 56dfeb62 this tree
--------------------------------------------------------------------------------
5310.2: repack to disk 8.98(8.05+0.29) 9.05(8.08+0.33) +0.8%
5310.3: simulated clone 2.02(2.27+0.09) 2.01(2.25+0.08) -0.5%
5310.4: simulated fetch 0.81(1.07+0.02) 0.81(1.05+0.04) +0.0%
5310.5: pack to file 7.58(7.04+0.28) 7.60(7.04+0.30) +0.3%
5310.6: pack to file (bitmap) 7.55(7.02+0.28) 3.25(2.82+0.18) -57.0%
5310.8: clone (partial bitmap) 1.83(2.26+0.12) 1.82(2.22+0.14) -0.5%
5310.9: pack to file (partial bitmap) 6.86(6.58+0.30) 2.87(2.74+0.20) -58.2%
More context:
http://marc.info/?t=146792101400001&r=1&w=2
http://public-inbox.org/git/20160707190917.20011-1-kirr@nexedi.com/T/#t
Cc: Vicent Marti <tanoku@gmail.com>
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Kirill Smelkov <kirr@nexedi.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The delta-base-cache mechanism has been a key to the performance in
a repository with a tightly packed packfile, but it did not scale
well even with a larger value of core.deltaBaseCacheLimit.
* jk/delta-base-cache:
t/perf: add basic perf tests for delta base cache
delta_base_cache: use hashmap.h
delta_base_cache: drop special treatment of blobs
delta_base_cache: use list.h for LRU
release_delta_base_cache: reuse existing detach function
clear_delta_base_cache_entry: use a more descriptive name
cache_or_unpack_entry: drop keep_cache parameter
|
|
* kw/patch-ids-optim:
p3400: make test script executable
|
|
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This just shows off the improvements done by the last few
patches, and gives us a baseline for noticing regressions in
the future. Here are the results with linux.git as the perf
"large repo":
Test origin HEAD
-------------------------------------------------------------------
0003.1: log --raw 43.41(40.36+2.69) 33.86(30.96+2.41) -22.0%
0003.2: log -S 313.61(309.74+3.78) 298.75(295.58+3.00) -4.7%
(for a large repo, the "log -S" improvements are greater if
you bump the delta base cache limit, but I think it makes
sense to test the "stock" behavior, since that is what most
people will see).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When "git rebase" tries to compare set of changes on the updated
upstream and our own branch, it computes patch-id for all of these
changes and attempts to find matches. This has been optimized by
lazily computing the full patch-id (which is expensive) to be
compared only for changes that touch the same set of paths.
* kw/patch-ids-optim:
rebase: avoid computing unnecessary patch IDs
patch-ids: add flag to create the diff patch id using header only data
patch-ids: replace the seen indicator with a commit pointer
patch-ids: stop using a hand-rolled hashmap implementation
|
|
The `rebase` family of Git commands avoid applying patches that were
already integrated upstream. They do that by using the revision walking
option that computes the patch IDs of the two sides of the rebase
(local-only patches vs upstream-only ones) and skipping those local
patches whose patch ID matches one of the upstream ones.
In many cases, this causes unnecessary churn, as already the set of
paths touched by a given commit would suffice to determine that an
upstream patch has no local equivalent.
This hurts performance in particular when there are a lot of upstream
patches, and/or large ones.
Therefore, let's introduce the concept of a "diff-header-only" patch ID,
compare those first, and only evaluate the "full" patch ID lazily.
Please note that in contrast to the "full" patch IDs, those
"diff-header-only" patch IDs are prone to collide with one another, as
adjacent commits frequently touch the very same files. Hence we now
have to be careful to allow multiple hash entries with the same hash.
We accomplish that by using the hashmap_add() function that does not even
test for hash collisions. This also allows us to evaluate the full patch ID
lazily, i.e. only when we found commits with matching diff-header-only
patch IDs.
We add a performance test that demonstrates ~1-6% improvement. In
practice this will depend on various factors such as how many upstream
changes and how big those changes are along with whether file system
caches are cold or warm. As Git's test suite has no way of catching
performance regressions, we also add a regression test that verifies
that the full patch ID computation is skipped when the diff-header-only
computation suffices.
Signed-off-by: Kevin Willford <kcwillford@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Git's pack storage does efficient (log n) lookups in a
single packfile's index, but if we have multiple packfiles,
we have to linearly search each for a given object. This
patch introduces some timing tests for cases where we have a
large number of packs, so that we can measure any
improvements we make in the following patches.
The main thing we want to time is object lookup. To do this,
we measure "git rev-list --objects --all", which does a
fairly large number of object lookups (essentially one per
object in the repository).
However, we also measure the time to do a full repack, which
is interesting for two reasons. One is that in addition to
the usual pack lookup, it has its own linear iteration over
the list of packs. And two is that because it it is the tool
one uses to go from an inefficient many-pack situation back
to a single pack, we care about its performance not only at
marginal numbers of packs, but at the extreme cases (e.g.,
if you somehow end up with 5,000 packs, it is the only way
to get back to 1 pack, so we need to make sure it performs
well).
We measure the performance of each command in three
scenarios: 1 pack, 50 packs, and 1,000 packs.
The 1-pack case is a baseline; any optimizations we do to
handle multiple packs cannot possibly perform better than
this.
The 50-pack case is as far as Git should generally allow
your repository to go, if you have auto-gc enabled with the
default settings. So this represents the maximum performance
improvement we would expect under normal circumstances.
The 1,000-pack case is hopefully rare, though I have seen it
in the wild where automatic maintenance was broken for some
time (and the repository continued to receive pushes). This
represents cases where we care less about general
performance, but want to make sure that a full repack
command does not take excessively long.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Allow t/perf framework to use the features from the most recent
version of Git even when testing an older installed version.
* jk/perf-any-version:
p4211: explicitly disable renames in no-rename test
t/perf: fix regression in testing older versions of git
|
|
p4211 tests line-log performance both with and without "-M".
In v2.9.0, the case without "-M" appears to have regressed
badly, but that is only because we flipped on renames by
default.
Let's have the test explicitly disable renames to get
consistent timings (and to match the presumed intent of the
test, which is to see the effects with and without renames).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Commit 7501b59 (perf: make the tests work in worktrees,
2016-05-13) introduced the use of "git rev-parse --git-path"
in the perf-lib setup code. Because the to-be-tested version
of git is at the front of the $PATH when this code runs,
this means we cannot use modern versions of t/perf to test
versions of git older than v2.5.0 (when that option was
introduced).
This is a symptom of a more general problem. The t/perf
suite is essentially independent of git versions, and
ideally we would be able to run the most modern and complete
set of tests across many historical versions (to see how
they compare). But any setup code they run is therefore
required to use the lowest common denominator we expect to
test.
So let's introduce a new variable, $MODERN_GIT, that we can
use both in perf-lib and in the test setup to get a reliable
set of git features (we might change git and break some
tests, of course, but $MODERN_GIT is tied to the same
version of git as the t/perf scripts, so they can be fixed
or adjusted together).
This commit fixes the "--git-path" case, but does not
mass-convert existing setup code to use $MODERN_GIT. Most
setup code is fairly vanilla and will work with effectively
all versions. But now the tool is there to fix any other
issues we find going forward.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
As this developer has no access to MacOSX developer setups anymore,
Travis becomes the best bet to run performance tests on that OS.
However, on MacOSX /usr/bin/time is that good old BSD executable that
no Linux user cares about, as demonstrated by the perf-lib.sh's use
of GNU-ish extensions. And by the hard-coded path.
Let's just work around this issue by using gtime on MacOSX, the
Homebrew-provided GNU implementation onto which pretty much every
MacOSX power user falls back anyway.
To help other developers use Travis to run performance tests on
MacOSX, the .travis.yml file now sports a commented-out line that
installs GNU time via Homebrew.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Reviewed-by: Lars Schneider <larsxschneider@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In regular repositories $source_git and $objects_dir contain relative
paths based on $source. Go there to allow cp to resolve them.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This developer spent a lot of time trying to speed up the interactive
rebase, in particular on Windows. And will continue to do so.
To make it easier to demonstrate the performance improvement, let's have
a reproducible performance test.
The topic branch we use to test performance was found using these shell
commands (essentially searching for a long-enough topic branch in Git's
own history that touched the same file multiple times):
git rev-list --parents origin/master |
grep ' .* ' |
while read commit rest
do
patch_count=$(git rev-list --count $commit^..$commit^2)
test $patch_count -gt 20 || continue
merges="$(git rev-list --parents $commit^..$commit^2 |
grep ' .* ')"
test -z "$merges" || continue
patches_per_file="$(git log --pretty=%H --name-only \
$commit^..$commit^2 |
grep -v '^$' |
sort |
uniq -c -d |
sort -n -r)"
test -n "$patches_per_file" &&
test 20 -lt $(echo "$patches_per_file" |
sed -n '1s/^ *\([0-9]*\).*/\1/p') || continue
printf 'commit %s\n%s\n' "$commit" "$patches_per_file"
done
Note that we can get away with *not* having to reset to the original
branch tip before rebasing: we switch the first two "pick" lines every
time, so we end up with the same patch order after two rebases, and the
complexity of both rebases is equivalent.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This patch makes perf-lib.sh more robust so that it can run correctly
even inside a worktree. For example, it assumed that $GIT_DIR/objects is
the objects directory (which is not the case for worktrees) and it used
the commondir file verbatim, even if it contained a relative path.
Furthermore, the setup code expected `git rev-parse --git-dir` to spit
out a relative path, which is also not true for worktrees. Let's just
change the code to accept both relative and absolute paths, by avoiding
the `cd` into the copied working directory.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We already have a perfectly fine prereq to tell us whether it is safe to
use symlinks. So let's use it.
This fixes the performance tests in Git for Windows' SDK, where symlinks
are not really available ([*1*]). This is not an issue with Git for
Windows itself because it configures core.symlinks=false in its system
config. However, the system config is disabled for the performance
tests, for obvious reasons: we want them to be independent of the
vagaries of any local configuration.
Footnote *1*: Windows has symbolic links. Git for Windows disables them
by default, though (for example: in standard setups, non-admins lack the
privilege to create symbolic links). For details, see
https://github.com/git-for-windows/git/wiki/Symbolic-Links
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When we want to look up a submodule ref, we use
get_ref_cache(path) to find or auto-create its ref cache.
But if we feed a path that isn't actually a git repository,
we blindly create the ref cache, and then may die deeper in
the code when we try to access it. This is a problem because
many callers speculatively feed us a path that looks vaguely
like a repository, and expect us to tell them when it is
not.
This patch teaches resolve_gitlink_ref to reject
non-repository paths without creating a ref_cache. This
avoids the die(), and also performs better if you have a
large number of these faux-submodule directories (because
the ref_cache lookup is linear, under the assumption that
there won't be a large number of submodules).
To accomplish this, we also break get_ref_cache into two
pieces: the lookup and auto-creation (the latter is lumped
into create_ref_cache). This lets us first cheaply ask our
cache "is it a submodule we know about?" If so, we can avoid
repeating our filesystem lookup. So lookups of real
submodules are not penalized; they examine the submodule's
.git directory only once.
The test in t3000 demonstrates a case where this improves
correctness (we used to just die). The new perf case in
p7300 shows off the speed improvement in an admittedly
pathological repository:
Test HEAD^ HEAD
----------------------------------------------------------------
7300.4: ls-files -o 66.97(66.15+0.87) 0.33(0.08+0.24) -99.5%
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If the user specifies an index filter but not a tree filter,
filter-branch cleverly avoids checking out the tree
entirely. But we don't do the next level of optimization: if
you have no index or tree filter, we do not need to read the
index at all.
This can greatly speed up cases where we are only changing
the commit objects (e.g., cementing a graft into place).
Here are numbers from the newly-added perf test:
Test HEAD^ HEAD
---------------------------------------------------------------
7000.2: noop filter 13.81(4.95+0.83) 5.43(0.42+0.43) -60.7%
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Performance-measurement tests did not work without an installed Git.
* sb/perf-without-installed-git:
t/perf: make runner work even if Git is not installed
|
|
aggregate.perl did not work when Git.pm is not installed to a directory
contained in the default Perl library path list or PERLLIB.
This commit prepends the Perl library path of the current Git source
tree to enable this.
Note that this commit adds a hard-coded relative path
use lib '../../perl/blib/lib';
instead of the flexible environment-based variant
use lib (split(/:/, $ENV{GITPERLLIB}));
which is used in tests written in Perl.
The hard-coded variant is used because the whole performance test
framework does it that way (and GITPERLLIB is not set there).
Signed-off-by: Stephan Beyer <s-beyer@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Replace "is this subdirectory a separate repository that should not
be touched?" check "git clean" does by checking if it has .git/HEAD
using the submodule-related code with a more optimized check.
* ee/clean-remove-dirs:
read_gitfile_gently: fix use-after-free
clean: improve performance when removing lots of directories
p7300: add performance tests for clean
t7300: add tests to document behavior of clean and nested git
setup: sanity check file size in read_gitfile_gently
setup: add gentle version of read_gitfile
|
|
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The tests are run in dry-run mode to avoid having to restore the test
directories for each timed iteration. Using dry-run is an acceptable
compromise since we are mostly interested in the initial computation
of what to clean and not so much in the cleaning it self.
Signed-off-by: Erik Elfström <erik.elfstrom@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When copying the test repository, we try to detect whether
the copy succeeded. However, most of the heavy lifting is
done inside a for loop, where our "break" will lose the exit
code of the failing "cp". We can take advantage of the fact
that we are in a subshell, and just "exit 1" to break out
with a code.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* jk/repack-pack-writebitmaps-config:
t7700: drop explicit --no-pack-kept-objects from .keep test
repack: introduce repack.writeBitmaps config option
repack: simplify handling of --write-bitmap-index
pack-objects: stop respecting pack.writebitmaps
|
|
We currently have pack.writeBitmaps, which originally
operated at the pack-objects level. This should really have
been a repack.* option from day one. Let's give it the more
sensible name, but keep the old version as a deprecated
synonym.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
sed -i 's@`\(.*\)`@$(\1)@g' ${_f}
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Borrow the bitmap index into packfiles from JGit to speed up
enumeration of objects involved in a commit range without having to
fully traverse the history.
* jk/pack-bitmap: (26 commits)
ewah: unconditionally ntohll ewah data
ewah: support platforms that require aligned reads
read-cache: use get_be32 instead of hand-rolled ntoh_l
block-sha1: factor out get_be and put_be wrappers
do not discard revindex when re-preparing packfiles
pack-bitmap: implement optional name_hash cache
t/perf: add tests for pack bitmaps
t: add basic bitmap functionality tests
count-objects: recognize .bitmap in garbage-checking
repack: consider bitmaps when performing repacks
repack: handle optional files created by pack-objects
repack: turn exts array into array-of-struct
repack: stop using magic number for ARRAY_SIZE(exts)
pack-objects: implement bitmap writing
rev-list: add bitmap mode to speed up object lists
pack-objects: use bitmaps when packing objects
pack-objects: split add_object_entry
pack-bitmap: add support for bitmap indexes
documentation: add documentation for the bitmap format
ewah: compressed bitmap implementation
...
|
|
Fix performance regression in v1.8.4.x and later.
* jk/mark-edges-uninteresting:
list-objects: only look at cmdline trees with edge_hint
t/perf: time rev-list with UNINTERESTING commits
|
|
We time a straight "rev-list --all" and its "--object"
counterpart, both going all the way to the root. However, we
do not time a partial history walk. This patch adds an
extreme case: a walk over a very small slice of history, but
with a very large set of UNINTERESTING tips. This is similar
to the connectivity check run by git on a small fetch, or
the walk done by any pre-receive hooks that want to check
incoming commits.
This test reveals a performance regression in git v1.8.4.2,
caused by fbd4a70 (list-objects: mark more commits as edges
in mark_edges_uninteresting, 2013-08-16):
Test fbd4a703^ fbd4a703
------------------------------------------------------------------------------------------
0001.1: rev-list --all 0.69(0.67+0.02) 0.69(0.68+0.01) +0.0%
0001.2: rev-list --all --objects 3.47(3.44+0.02) 3.48(3.44+0.03) +0.3%
0001.4: rev-list $commit --not --all 0.04(0.04+0.00) 0.04(0.04+0.00) +0.0%
0001.5: rev-list --objects $commit --not --all 0.04(0.03+0.00) 0.27(0.24+0.02) +575.0%
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When we use pack bitmaps rather than walking the object
graph, we end up with the list of objects to include in the
packfile, but we do not know the path at which any tree or
blob objects would be found.
In a recently packed repository, this is fine. A fetch would
use the paths only as a heuristic in the delta compression
phase, and a fully packed repository should not need to do
much delta compression.
As time passes, though, we may acquire more objects on top
of our large bitmapped pack. If clients fetch frequently,
then they never even look at the bitmapped history, and all
works as usual. However, a client who has not fetched since
the last bitmap repack will have "have" tips in the
bitmapped history, but "want" newer objects.
The bitmaps themselves degrade gracefully in this
circumstance. We manually walk the more recent bits of
history, and then use bitmaps when we hit them.
But we would also like to perform delta compression between
the newer objects and the bitmapped objects (both to delta
against what we know the user already has, but also between
"new" and "old" objects that the user is fetching). The lack
of pathnames makes our delta heuristics much less effective.
This patch adds an optional cache of the 32-bit name_hash
values to the end of the bitmap file. If present, a reader
can use it to match bitmapped and non-bitmapped names during
delta compression.
Here are perf results for p5310:
Test origin/master HEAD^ HEAD
-------------------------------------------------------------------------------------------------
5310.2: repack to disk 36.81(37.82+1.43) 47.70(48.74+1.41) +29.6% 47.75(48.70+1.51) +29.7%
5310.3: simulated clone 30.78(29.70+2.14) 1.08(0.97+0.10) -96.5% 1.07(0.94+0.12) -96.5%
5310.4: simulated fetch 3.16(6.10+0.08) 3.54(10.65+0.06) +12.0% 1.70(3.07+0.06) -46.2%
5310.6: partial bitmap 36.76(43.19+1.81) 6.71(11.25+0.76) -81.7% 4.08(6.26+0.46) -88.9%
You can see that the time spent on an incremental fetch goes
down, as our delta heuristics are able to do their work.
And we save time on the partial bitmap clone for the same
reason.
Signed-off-by: Vicent Marti <tanoku@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This adds a few basic perf tests for the pack bitmap code to
show off its improvements. The tests are:
1. How long does it take to do a repack (it gets slower
with bitmaps, since we have to do extra work)?
2. How long does it take to do a clone (it gets faster
with bitmaps)?
3. How does a small fetch perform when we've just
repacked?
4. How does a clone perform when we haven't repacked since
a week of pushes?
Here are results against linux.git:
Test origin/master this tree
-----------------------------------------------------------------------
5310.2: repack to disk 33.64(32.64+2.04) 67.67(66.75+1.84) +101.2%
5310.3: simulated clone 30.49(29.47+2.05) 1.20(1.10+0.10) -96.1%
5310.4: simulated fetch 3.49(6.79+0.06) 5.57(22.35+0.07) +59.6%
5310.6: partial bitmap 36.70(43.87+1.81) 8.18(21.92+0.73) -77.7%
You can see that we do take longer to repack, but we do way
better for further clones. A small fetch performs a bit
worse, as we spend way more time on delta compression (note
the heavy user CPU time, as we have 8 threads) due to the
lack of name hashes for the bitmapped objects.
The final test shows how the bitmaps degrade over time
between packs. There's still a significant speedup over the
non-bitmap case, but we don't do quite as well (we have to
spend time accessing the "new" objects the old fashioned
way, including delta compression).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git diff ../else/where/A ../else/where/B" when ../else/where is
clearly outside the repository, and "git diff --no-index A B", do
not have to look at the index at all, but we used to read the index
unconditionally.
* tg/diff-no-index-refactor:
diff: avoid some nesting
diff: add test for --no-index executed outside repo
diff: don't read index when --no-index is given
diff: move no-index detection to builtin/diff.c
|
|
git diff --no-index ... currently reads the index, during setup, when
calling gitmodules_config(). This results in worse performance when the
index is not actually needed. This patch avoids calling
gitmodules_config() when the --no-index option is given. The times for
executing "git diff --no-index" in the WebKit repository are improved as
follows:
Test HEAD~3 HEAD
------------------------------------------------------------------
4001.1: diff --no-index 0.24(0.15+0.09) 0.01(0.00+0.00) -95.8%
An additional improvement of this patch is that "git diff --no-index" no
longer breaks when the index file is corrupt, which makes it possible to
use it for investigating the broken repository.
To improve the possible usage as investigation tool for broken
repositories, setup_git_directory_gently() is also not called when the
--no-index option is given.
Also add a test to guard against future breakages, and a performance
test to show the improvements.
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A #! line in these files is misleading, since these scriptlets are
meant to be sourced with '.' (using whatever shell sources them)
instead of run directly using the interpreter named on the #! line.
Removing the #! line shouldn't hurt syntax highlighting since
these files have filenames ending with '.sh'. For documentation,
add a brief description of how the files are meant to be used in
place of the shebang line.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* lf/echo-n-is-not-portable:
Avoid using `echo -n` anywhere
|
|
`echo -n` is non-portable. The POSIX specification says:
Conforming applications that wish to do prompting without <newline>
characters or that could possibly be expecting to echo a -n, should
use the printf utility derived from the Ninth Edition system.
Since all of the affected shell scripts use a POSIX shell shebang,
replace `echo -n` invocations with printf.
Signed-off-by: Lukas Fleischer <git@cryptocrack.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
Junio C Hamano
Devin J. Pohly
Jeff King
Jonathan Tan
René Scharfe
Kirill Smelkov
Kevin Willford
Johannes Schindelin
Stephan Beyer
Stefan Beller
Erik Elfström
Elia Pinto
Vicent Marti
Thomas Gummerer
Jonathan Nieder
Lukas Fleischer