| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Allow t/perf framework to use the features from the most recent
version of Git even when testing an older installed version.
* jk/perf-any-version:
p4211: explicitly disable renames in no-rename test
t/perf: fix regression in testing older versions of git
|
|
p4211 tests line-log performance both with and without "-M".
In v2.9.0, the case without "-M" appears to have regressed
badly, but that is only because we flipped on renames by
default.
Let's have the test explicitly disable renames to get
consistent timings (and to match the presumed intent of the
test, which is to see the effects with and without renames).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Commit 7501b59 (perf: make the tests work in worktrees,
2016-05-13) introduced the use of "git rev-parse --git-path"
in the perf-lib setup code. Because the to-be-tested version
of git is at the front of the $PATH when this code runs,
this means we cannot use modern versions of t/perf to test
versions of git older than v2.5.0 (when that option was
introduced).
This is a symptom of a more general problem. The t/perf
suite is essentially independent of git versions, and
ideally we would be able to run the most modern and complete
set of tests across many historical versions (to see how
they compare). But any setup code they run is therefore
required to use the lowest common denominator we expect to
test.
So let's introduce a new variable, $MODERN_GIT, that we can
use both in perf-lib and in the test setup to get a reliable
set of git features (we might change git and break some
tests, of course, but $MODERN_GIT is tied to the same
version of git as the t/perf scripts, so they can be fixed
or adjusted together).
This commit fixes the "--git-path" case, but does not
mass-convert existing setup code to use $MODERN_GIT. Most
setup code is fairly vanilla and will work with effectively
all versions. But now the tool is there to fix any other
issues we find going forward.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
As this developer has no access to MacOSX developer setups anymore,
Travis becomes the best bet to run performance tests on that OS.
However, on MacOSX /usr/bin/time is that good old BSD executable that
no Linux user cares about, as demonstrated by the perf-lib.sh's use
of GNU-ish extensions. And by the hard-coded path.
Let's just work around this issue by using gtime on MacOSX, the
Homebrew-provided GNU implementation onto which pretty much every
MacOSX power user falls back anyway.
To help other developers use Travis to run performance tests on
MacOSX, the .travis.yml file now sports a commented-out line that
installs GNU time via Homebrew.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Reviewed-by: Lars Schneider <larsxschneider@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In regular repositories $source_git and $objects_dir contain relative
paths based on $source. Go there to allow cp to resolve them.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This developer spent a lot of time trying to speed up the interactive
rebase, in particular on Windows. And will continue to do so.
To make it easier to demonstrate the performance improvement, let's have
a reproducible performance test.
The topic branch we use to test performance was found using these shell
commands (essentially searching for a long-enough topic branch in Git's
own history that touched the same file multiple times):
git rev-list --parents origin/master |
grep ' .* ' |
while read commit rest
do
patch_count=$(git rev-list --count $commit^..$commit^2)
test $patch_count -gt 20 || continue
merges="$(git rev-list --parents $commit^..$commit^2 |
grep ' .* ')"
test -z "$merges" || continue
patches_per_file="$(git log --pretty=%H --name-only \
$commit^..$commit^2 |
grep -v '^$' |
sort |
uniq -c -d |
sort -n -r)"
test -n "$patches_per_file" &&
test 20 -lt $(echo "$patches_per_file" |
sed -n '1s/^ *\([0-9]*\).*/\1/p') || continue
printf 'commit %s\n%s\n' "$commit" "$patches_per_file"
done
Note that we can get away with *not* having to reset to the original
branch tip before rebasing: we switch the first two "pick" lines every
time, so we end up with the same patch order after two rebases, and the
complexity of both rebases is equivalent.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This patch makes perf-lib.sh more robust so that it can run correctly
even inside a worktree. For example, it assumed that $GIT_DIR/objects is
the objects directory (which is not the case for worktrees) and it used
the commondir file verbatim, even if it contained a relative path.
Furthermore, the setup code expected `git rev-parse --git-dir` to spit
out a relative path, which is also not true for worktrees. Let's just
change the code to accept both relative and absolute paths, by avoiding
the `cd` into the copied working directory.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We already have a perfectly fine prereq to tell us whether it is safe to
use symlinks. So let's use it.
This fixes the performance tests in Git for Windows' SDK, where symlinks
are not really available ([*1*]). This is not an issue with Git for
Windows itself because it configures core.symlinks=false in its system
config. However, the system config is disabled for the performance
tests, for obvious reasons: we want them to be independent of the
vagaries of any local configuration.
Footnote *1*: Windows has symbolic links. Git for Windows disables them
by default, though (for example: in standard setups, non-admins lack the
privilege to create symbolic links). For details, see
https://github.com/git-for-windows/git/wiki/Symbolic-Links
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When we want to look up a submodule ref, we use
get_ref_cache(path) to find or auto-create its ref cache.
But if we feed a path that isn't actually a git repository,
we blindly create the ref cache, and then may die deeper in
the code when we try to access it. This is a problem because
many callers speculatively feed us a path that looks vaguely
like a repository, and expect us to tell them when it is
not.
This patch teaches resolve_gitlink_ref to reject
non-repository paths without creating a ref_cache. This
avoids the die(), and also performs better if you have a
large number of these faux-submodule directories (because
the ref_cache lookup is linear, under the assumption that
there won't be a large number of submodules).
To accomplish this, we also break get_ref_cache into two
pieces: the lookup and auto-creation (the latter is lumped
into create_ref_cache). This lets us first cheaply ask our
cache "is it a submodule we know about?" If so, we can avoid
repeating our filesystem lookup. So lookups of real
submodules are not penalized; they examine the submodule's
.git directory only once.
The test in t3000 demonstrates a case where this improves
correctness (we used to just die). The new perf case in
p7300 shows off the speed improvement in an admittedly
pathological repository:
Test HEAD^ HEAD
----------------------------------------------------------------
7300.4: ls-files -o 66.97(66.15+0.87) 0.33(0.08+0.24) -99.5%
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If the user specifies an index filter but not a tree filter,
filter-branch cleverly avoids checking out the tree
entirely. But we don't do the next level of optimization: if
you have no index or tree filter, we do not need to read the
index at all.
This can greatly speed up cases where we are only changing
the commit objects (e.g., cementing a graft into place).
Here are numbers from the newly-added perf test:
Test HEAD^ HEAD
---------------------------------------------------------------
7000.2: noop filter 13.81(4.95+0.83) 5.43(0.42+0.43) -60.7%
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Performance-measurement tests did not work without an installed Git.
* sb/perf-without-installed-git:
t/perf: make runner work even if Git is not installed
|
|
aggregate.perl did not work when Git.pm is not installed to a directory
contained in the default Perl library path list or PERLLIB.
This commit prepends the Perl library path of the current Git source
tree to enable this.
Note that this commit adds a hard-coded relative path
use lib '../../perl/blib/lib';
instead of the flexible environment-based variant
use lib (split(/:/, $ENV{GITPERLLIB}));
which is used in tests written in Perl.
The hard-coded variant is used because the whole performance test
framework does it that way (and GITPERLLIB is not set there).
Signed-off-by: Stephan Beyer <s-beyer@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Replace "is this subdirectory a separate repository that should not
be touched?" check "git clean" does by checking if it has .git/HEAD
using the submodule-related code with a more optimized check.
* ee/clean-remove-dirs:
read_gitfile_gently: fix use-after-free
clean: improve performance when removing lots of directories
p7300: add performance tests for clean
t7300: add tests to document behavior of clean and nested git
setup: sanity check file size in read_gitfile_gently
setup: add gentle version of read_gitfile
|
|
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The tests are run in dry-run mode to avoid having to restore the test
directories for each timed iteration. Using dry-run is an acceptable
compromise since we are mostly interested in the initial computation
of what to clean and not so much in the cleaning it self.
Signed-off-by: Erik Elfström <erik.elfstrom@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When copying the test repository, we try to detect whether
the copy succeeded. However, most of the heavy lifting is
done inside a for loop, where our "break" will lose the exit
code of the failing "cp". We can take advantage of the fact
that we are in a subshell, and just "exit 1" to break out
with a code.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* jk/repack-pack-writebitmaps-config:
t7700: drop explicit --no-pack-kept-objects from .keep test
repack: introduce repack.writeBitmaps config option
repack: simplify handling of --write-bitmap-index
pack-objects: stop respecting pack.writebitmaps
|
|
We currently have pack.writeBitmaps, which originally
operated at the pack-objects level. This should really have
been a repack.* option from day one. Let's give it the more
sensible name, but keep the old version as a deprecated
synonym.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
sed -i 's@`\(.*\)`@$(\1)@g' ${_f}
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Borrow the bitmap index into packfiles from JGit to speed up
enumeration of objects involved in a commit range without having to
fully traverse the history.
* jk/pack-bitmap: (26 commits)
ewah: unconditionally ntohll ewah data
ewah: support platforms that require aligned reads
read-cache: use get_be32 instead of hand-rolled ntoh_l
block-sha1: factor out get_be and put_be wrappers
do not discard revindex when re-preparing packfiles
pack-bitmap: implement optional name_hash cache
t/perf: add tests for pack bitmaps
t: add basic bitmap functionality tests
count-objects: recognize .bitmap in garbage-checking
repack: consider bitmaps when performing repacks
repack: handle optional files created by pack-objects
repack: turn exts array into array-of-struct
repack: stop using magic number for ARRAY_SIZE(exts)
pack-objects: implement bitmap writing
rev-list: add bitmap mode to speed up object lists
pack-objects: use bitmaps when packing objects
pack-objects: split add_object_entry
pack-bitmap: add support for bitmap indexes
documentation: add documentation for the bitmap format
ewah: compressed bitmap implementation
...
|
|
Fix performance regression in v1.8.4.x and later.
* jk/mark-edges-uninteresting:
list-objects: only look at cmdline trees with edge_hint
t/perf: time rev-list with UNINTERESTING commits
|
|
We time a straight "rev-list --all" and its "--object"
counterpart, both going all the way to the root. However, we
do not time a partial history walk. This patch adds an
extreme case: a walk over a very small slice of history, but
with a very large set of UNINTERESTING tips. This is similar
to the connectivity check run by git on a small fetch, or
the walk done by any pre-receive hooks that want to check
incoming commits.
This test reveals a performance regression in git v1.8.4.2,
caused by fbd4a70 (list-objects: mark more commits as edges
in mark_edges_uninteresting, 2013-08-16):
Test fbd4a703^ fbd4a703
------------------------------------------------------------------------------------------
0001.1: rev-list --all 0.69(0.67+0.02) 0.69(0.68+0.01) +0.0%
0001.2: rev-list --all --objects 3.47(3.44+0.02) 3.48(3.44+0.03) +0.3%
0001.4: rev-list $commit --not --all 0.04(0.04+0.00) 0.04(0.04+0.00) +0.0%
0001.5: rev-list --objects $commit --not --all 0.04(0.03+0.00) 0.27(0.24+0.02) +575.0%
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When we use pack bitmaps rather than walking the object
graph, we end up with the list of objects to include in the
packfile, but we do not know the path at which any tree or
blob objects would be found.
In a recently packed repository, this is fine. A fetch would
use the paths only as a heuristic in the delta compression
phase, and a fully packed repository should not need to do
much delta compression.
As time passes, though, we may acquire more objects on top
of our large bitmapped pack. If clients fetch frequently,
then they never even look at the bitmapped history, and all
works as usual. However, a client who has not fetched since
the last bitmap repack will have "have" tips in the
bitmapped history, but "want" newer objects.
The bitmaps themselves degrade gracefully in this
circumstance. We manually walk the more recent bits of
history, and then use bitmaps when we hit them.
But we would also like to perform delta compression between
the newer objects and the bitmapped objects (both to delta
against what we know the user already has, but also between
"new" and "old" objects that the user is fetching). The lack
of pathnames makes our delta heuristics much less effective.
This patch adds an optional cache of the 32-bit name_hash
values to the end of the bitmap file. If present, a reader
can use it to match bitmapped and non-bitmapped names during
delta compression.
Here are perf results for p5310:
Test origin/master HEAD^ HEAD
-------------------------------------------------------------------------------------------------
5310.2: repack to disk 36.81(37.82+1.43) 47.70(48.74+1.41) +29.6% 47.75(48.70+1.51) +29.7%
5310.3: simulated clone 30.78(29.70+2.14) 1.08(0.97+0.10) -96.5% 1.07(0.94+0.12) -96.5%
5310.4: simulated fetch 3.16(6.10+0.08) 3.54(10.65+0.06) +12.0% 1.70(3.07+0.06) -46.2%
5310.6: partial bitmap 36.76(43.19+1.81) 6.71(11.25+0.76) -81.7% 4.08(6.26+0.46) -88.9%
You can see that the time spent on an incremental fetch goes
down, as our delta heuristics are able to do their work.
And we save time on the partial bitmap clone for the same
reason.
Signed-off-by: Vicent Marti <tanoku@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This adds a few basic perf tests for the pack bitmap code to
show off its improvements. The tests are:
1. How long does it take to do a repack (it gets slower
with bitmaps, since we have to do extra work)?
2. How long does it take to do a clone (it gets faster
with bitmaps)?
3. How does a small fetch perform when we've just
repacked?
4. How does a clone perform when we haven't repacked since
a week of pushes?
Here are results against linux.git:
Test origin/master this tree
-----------------------------------------------------------------------
5310.2: repack to disk 33.64(32.64+2.04) 67.67(66.75+1.84) +101.2%
5310.3: simulated clone 30.49(29.47+2.05) 1.20(1.10+0.10) -96.1%
5310.4: simulated fetch 3.49(6.79+0.06) 5.57(22.35+0.07) +59.6%
5310.6: partial bitmap 36.70(43.87+1.81) 8.18(21.92+0.73) -77.7%
You can see that we do take longer to repack, but we do way
better for further clones. A small fetch performs a bit
worse, as we spend way more time on delta compression (note
the heavy user CPU time, as we have 8 threads) due to the
lack of name hashes for the bitmapped objects.
The final test shows how the bitmaps degrade over time
between packs. There's still a significant speedup over the
non-bitmap case, but we don't do quite as well (we have to
spend time accessing the "new" objects the old fashioned
way, including delta compression).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git diff ../else/where/A ../else/where/B" when ../else/where is
clearly outside the repository, and "git diff --no-index A B", do
not have to look at the index at all, but we used to read the index
unconditionally.
* tg/diff-no-index-refactor:
diff: avoid some nesting
diff: add test for --no-index executed outside repo
diff: don't read index when --no-index is given
diff: move no-index detection to builtin/diff.c
|
|
git diff --no-index ... currently reads the index, during setup, when
calling gitmodules_config(). This results in worse performance when the
index is not actually needed. This patch avoids calling
gitmodules_config() when the --no-index option is given. The times for
executing "git diff --no-index" in the WebKit repository are improved as
follows:
Test HEAD~3 HEAD
------------------------------------------------------------------
4001.1: diff --no-index 0.24(0.15+0.09) 0.01(0.00+0.00) -95.8%
An additional improvement of this patch is that "git diff --no-index" no
longer breaks when the index file is corrupt, which makes it possible to
use it for investigating the broken repository.
To improve the possible usage as investigation tool for broken
repositories, setup_git_directory_gently() is also not called when the
--no-index option is given.
Also add a test to guard against future breakages, and a performance
test to show the improvements.
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A #! line in these files is misleading, since these scriptlets are
meant to be sourced with '.' (using whatever shell sources them)
instead of run directly using the interpreter named on the #! line.
Removing the #! line shouldn't hurt syntax highlighting since
these files have filenames ending with '.sh'. For documentation,
add a brief description of how the files are meant to be used in
place of the shebang line.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* lf/echo-n-is-not-portable:
Avoid using `echo -n` anywhere
|
|
`echo -n` is non-portable. The POSIX specification says:
Conforming applications that wish to do prompting without <newline>
characters or that could possibly be expecting to echo a -n, should
use the printf utility derived from the Ninth Edition system.
Since all of the affected shell scripts use a POSIX shell shebang,
replace `echo -n` invocations with printf.
Signed-off-by: Lukas Fleischer <git@cryptocrack.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Allows N instances of tests run in parallel, each running 1/N parts
of the test suite under Valgrind, to speed things up.
* tr/test-v-and-v-subtest-only:
perf-lib: fix start/stop of perf tests
test-lib: support running tests under valgrind in parallel
test-lib: allow prefixing a custom string before "ok N" etc.
test-lib: valgrind for only tests matching a pattern
test-lib: verbose mode for only tests matching a pattern
test-lib: self-test that --verbose works
test-lib: rearrange start/end of test_expect_* and test_skip
test-lib: refactor $GIT_SKIP_TESTS matching
test-lib: enable MALLOC_* for the actual tests
|
|
ae75342 test-lib: rearrange start/end of test_expect_* and test_skip
changed the way tests are started/stopped, but did not update the perf
tests. They were therefore giving the wrong output, because of the
wrong test count. Fix this by starting and stopping the tests
correctly.
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Acked-by: Thomas Rast <trast@inf.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The 3.x tree has been out for a while now. The -2.6 repository name
survived the initial release [1], but kernel.org now only lists
'linux.git' (for aegl as well as torvalds) [2].
[1]: http://article.gmane.org/gmane.linux.kernel/1147422
On 2011-05-30 01:47:57 GMT, Linus Torvalds wrote:
> ... yes, that means that my git tree is still called
> "linux-2.6.git" on kernel.org.
[2]: http://git.kernel.org/cgit/
Signed-off-by: W. Trevor King <wking@tremily.us>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* rs/discard-index-discard-array:
read-cache: free cache in discard_index
read-cache: add simple performance test
|
|
Add the helper test-read-cache, which can be used to call read_cache and
discard_cache in a loop as well as a performance check based on it.
Signed-off-by: René Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* tr/line-log:
git-log(1): remove --full-line-diff description
line-log: fix documentation formatting
log -L: improve comments in process_all_files()
log -L: store the path instead of a diff_filespec
log -L: test merge of parallel modify/rename
t4211: pass -M to 'git log -M -L...' test
log -L: fix overlapping input ranges
log -L: check range set invariants when we look it up
Speed up log -L... -M
log -L: :pattern:file syntax to find by funcname
Implement line-history search (git log -L)
Export rewrite_parents() for 'log -L'
Refactor parse_loc
|
|
This is a rewrite of much of Bo's work, mainly in an effort to split
it into smaller, easier to understand routines.
The algorithm is built around the struct range_set, which encodes a
series of line ranges as intervals [a,b). This is used in two
contexts:
* A set of lines we are tracking (which will change as we dig through
history).
* To encode diffs, as pairs of ranges.
The main routine is range_set_map_across_diff(). It processes the
diff between a commit C and some parent P. It determines which diff
hunks are relevant to the ranges tracked in C, and computes the new
ranges for P.
The algorithm is then simply to process history in topological order
from newest to oldest, computing ranges and (partial) diffs. At
branch points, we need to merge the ranges we are watching. We will
find that many commits do not affect the chosen ranges, and mark them
TREESAME (in addition to those already filtered by pathspec limiting).
Another pass of history simplification then gets rid of such commits.
This is wired as an extra filtering pass in the log machinery. This
currently only reduces code duplication, but should allow for other
simplifications and options to be used.
Finally, we hook a diff printer into the output chain. Ideally we
would wire directly into the diff logic, to optionally use features
like word diff. However, that will require some major reworking of
the diff chain, so we completely replace the output with our own diff
for now.
As this was a GSoC project, and has quite some history by now, many
people have helped. In no particular order, thanks go to
Jakub Narebski <jnareb@gmail.com>
Jens Lehmann <Jens.Lehmann@web.de>
Jonathan Nieder <jrnieder@gmail.com>
Junio C Hamano <gitster@pobox.com>
Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Will Palmer <wmpalmer@gmail.com>
Apologies to everyone I forgot.
Signed-off-by: Bo Yang <struggleyb.nku@gmail.com>
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Currently the documentation of GIT_PERF_REPEAT_COUNT says the default is
five while "perf-lib.sh" uses a value of three as a default.
Update the documentation so that it is consistent with the code.
Signed-off-by: Antoine Pelisse <apelisse@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Fixes a brown-paper bag bug.
* ep/malloc-check-perturb:
MALLOC_CHECK: enable it, unless disabled explicitly
|
|
The malloc checks in tests are currently disabled. Actually evaluate
the variable for turning them off and enable them if it's unset.
Also use this opportunity to give it the more descriptive and
consistent name TEST_NO_MALLOC_CHECK.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Run our test scripts with MALLOC_CHECK_ and MALLOC_PERTURB_, the
built-in memory access checking facility GNU libc has.
* ep/malloc-check-perturb:
MALLOC_CHECK: various clean-ups
Add MALLOC_CHECK_ and MALLOC_PERTURB_ libc env to the test suite for detecting heap corruption
|
|
The most important in this change is to avoid affecting anything
when test-lib is used from perf-lib. It also limits the effect of
the MALLOC_CHECK only to what is run inside the actual test, and
uses a fixed MALLOC_PERTURB_ in order to avoid hurting repeatability
of the tests.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Jeff King wrote:
The seq command is GNU-ism, and is missing at least in older BSD
releases and their derivatives, not to mention antique
commercial Unixes.
We already purged it in b3431bc (Don't use seq in tests, not
everyone has it, 2007-05-02), but a few new instances have crept
in. They went unnoticed because they are in scripts that are not
run by default.
Replace them with test_seq that is implemented with a Perl snippet
(proposed by Jeff). This is better than inlining this snippet
everywhere it's needed because it's easier to read and it's easier
to change the implementation (e.g. to C) if we ever decide to remove
Perl from the test suite.
Note that test_seq is not a complete replacement for seq(1). It
just has what we need now, in addition that it makes it possible for
us to do something like "test_seq a m" if we wanted to in the
future.
There are also many places that do `for i in 1 2 3 ...` but I'm not sure
if it's worth converting them to test_seq. That would introduce running
more processes of Perl.
Signed-off-by: Michał Kiedrowicz <michal.kiedrowicz@gmail.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Enables threading in index-pack to resolve base data in parallel.
By Nguyễn Thái Ngọc Duy (3) and Ramsay Jones (1)
* nd/threaded-index-pack:
index-pack: disable threading if NO_PREAD is defined
index-pack: support multithreaded delta resolving
index-pack: restructure pack processing into three main functions
compat/win32/pthread.h: Add an pthread_key_delete() implementation
|
|
This puts delta resolving on each base on a separate thread, one base
cache per thread. Per-thread data is grouped in struct thread_local.
When running with nr_threads == 1, no pthreads calls are made. The
system essentially runs in non-thread mode.
An experiment on a Xeon 24 core machine with git.git shows that
performance does not increase proportional to the number of cores. So
by default, we use maximum 3 cores. Some numbers with --threads from 1
to 16:
1..4
real 0m8.003s 0m5.307s 0m4.321s 0m3.830s
user 0m7.720s 0m8.009s 0m8.133s 0m8.305s
sys 0m0.224s 0m0.372s 0m0.360s 0m0.360s
5..8
real 0m3.727s 0m3.604s 0m3.332s 0m3.369s
user 0m9.361s 0m9.817s 0m9.525s 0m9.769s
sys 0m0.584s 0m0.624s 0m0.540s 0m0.560s
9..12
real 0m3.036s 0m3.139s 0m3.177s 0m2.961s
user 0m8.977s 0m10.205s 0m9.737s 0m10.073s
sys 0m0.596s 0m0.680s 0m0.684s 0m0.680s
13..16
real 0m2.985s 0m2.894s 0m2.975s 0m2.971s
user 0m9.825s 0m10.573s 0m10.833s 0m11.361s
sys 0m0.788s 0m0.732s 0m0.904s 0m1.016s
On an Intel dual core and linux-2.6.git
1..4
real 2m37.789s 2m7.963s 2m0.920s 1m58.213s
user 2m28.415s 2m52.325s 2m50.176s 2m41.187s
sys 0m7.808s 0m11.181s 0m11.224s 0m10.731s
Thanks Ramsay Jones for troubleshooting and support on MinGW platform.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The 'log -3000 (baseline)' test accidentally still used -1000 from an
earlier version.
Noticed-by: Lawrence Holding <Lawrence.Holding@cubic.com>
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The only bug right now is that $GIT_TEST_CMP is needed for test_cmp to
work.
However, we also export the three most important paths for tests:
TEST_DIRECTORY
TRASH_DIRECTORY
GIT_BUILD_DIR
Since they are available within test_expect_success, a future test
writer may expect them to also be defined in test_perf.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Loading it in the subshells still referred to $TEST_DIRECTORY/..,
which was only correct in preliminary versions of perf-lib.sh
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
8c912ee (teach --histogram to diff, 2011-07-12) claimed histogram diff
was faster than both Myers and patience.
We have since incorporated a performance testing framework, so add a
test that compares the various diff tasks performed in a real 'log -p'
workload. This does indeed show that histogram diff slightly beats
Myers, while patience is much slower than the others.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The only catch is that we don't really know what our repo contains, so
we have to ignore any possible "not found" status from git-grep.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
Junio C Hamano
Jeff King
Johannes Schindelin
René Scharfe
Stephan Beyer
Stefan Beller
Erik Elfström
Elia Pinto
Vicent Marti
Thomas Gummerer
Jonathan Nieder
Lukas Fleischer
W. Trevor King
René Scharfe
Thomas Rast
Antoine Pelisse
Ramkumar Ramachandra
Michał Kiedrowicz
Nguyễn Thái Ngọc Duy