summaryrefslogtreecommitdiff
path: root/t/perf
AgeCommit message (Collapse)AuthorFilesLines
2016-07-11Merge branch 'jk/perf-any-version'Libravatar Junio C Hamano3-6/+17
Allow t/perf framework to use the features from the most recent version of Git even when testing an older installed version. * jk/perf-any-version: p4211: explicitly disable renames in no-rename test t/perf: fix regression in testing older versions of git
2016-06-22p4211: explicitly disable renames in no-rename testLibravatar Jeff King1-3/+3
p4211 tests line-log performance both with and without "-M". In v2.9.0, the case without "-M" appears to have regressed badly, but that is only because we flipped on renames by default. Let's have the test explicitly disable renames to get consistent timings (and to match the presumed intent of the test, which is to see the effects with and without renames). Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-06-22t/perf: fix regression in testing older versions of gitLibravatar Jeff King2-3/+14
Commit 7501b59 (perf: make the tests work in worktrees, 2016-05-13) introduced the use of "git rev-parse --git-path" in the perf-lib setup code. Because the to-be-tested version of git is at the front of the $PATH when this code runs, this means we cannot use modern versions of t/perf to test versions of git older than v2.5.0 (when that option was introduced). This is a symptom of a more general problem. The t/perf suite is essentially independent of git versions, and ideally we would be able to run the most modern and complete set of tests across many historical versions (to see how they compare). But any setup code they run is therefore required to use the lowest common denominator we expect to test. So let's introduce a new variable, $MODERN_GIT, that we can use both in perf-lib and in the test setup to get a reliable set of git features (we might change git and break some tests, of course, but $MODERN_GIT is tied to the same version of git as the t/perf scripts, so they can be fixed or adjusted together). This commit fixes the "--git-path" case, but does not mass-convert existing setup code to use $MODERN_GIT. Most setup code is fairly vanilla and will work with effectively all versions. But now the tool is there to fix any other issues we find going forward. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-06-21perf: accommodate for MacOSXLibravatar Johannes Schindelin1-1/+5
As this developer has no access to MacOSX developer setups anymore, Travis becomes the best bet to run performance tests on that OS. However, on MacOSX /usr/bin/time is that good old BSD executable that no Linux user cares about, as demonstrated by the perf-lib.sh's use of GNU-ish extensions. And by the hard-coded path. Let's just work around this issue by using gtime on MacOSX, the Homebrew-provided GNU implementation onto which pretty much every MacOSX power user falls back anyway. To help other developers use Travis to run performance tests on MacOSX, the .travis.yml file now sports a commented-out line that installs GNU time via Homebrew. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Reviewed-by: Lars Schneider <larsxschneider@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-05-31perf: make the tests work without a worktreeLibravatar René Scharfe1-1/+4
In regular repositories $source_git and $objects_dir contain relative paths based on $source. Go there to allow cp to resolve them. Signed-off-by: Rene Scharfe <l.s.r@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-05-13perf: run "rebase -i" under perfLibravatar Johannes Schindelin1-0/+36
This developer spent a lot of time trying to speed up the interactive rebase, in particular on Windows. And will continue to do so. To make it easier to demonstrate the performance improvement, let's have a reproducible performance test. The topic branch we use to test performance was found using these shell commands (essentially searching for a long-enough topic branch in Git's own history that touched the same file multiple times): git rev-list --parents origin/master | grep ' .* ' | while read commit rest do patch_count=$(git rev-list --count $commit^..$commit^2) test $patch_count -gt 20 || continue merges="$(git rev-list --parents $commit^..$commit^2 | grep ' .* ')" test -z "$merges" || continue patches_per_file="$(git log --pretty=%H --name-only \ $commit^..$commit^2 | grep -v '^$' | sort | uniq -c -d | sort -n -r)" test -n "$patches_per_file" && test 20 -lt $(echo "$patches_per_file" | sed -n '1s/^ *\([0-9]*\).*/\1/p') || continue printf 'commit %s\n%s\n' "$commit" "$patches_per_file" done Note that we can get away with *not* having to reset to the original branch tip before rebasing: we switch the first two "pick" lines every time, so we end up with the same patch order after two rebases, and the complexity of both rebases is equivalent. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-05-13perf: make the tests work in worktreesLibravatar Johannes Schindelin1-7/+7
This patch makes perf-lib.sh more robust so that it can run correctly even inside a worktree. For example, it assumed that $GIT_DIR/objects is the objects directory (which is not the case for worktrees) and it used the commondir file verbatim, even if it contained a relative path. Furthermore, the setup code expected `git rev-parse --git-dir` to spit out a relative path, which is also not true for worktrees. Let's just change the code to accept both relative and absolute paths, by avoiding the `cd` into the copied working directory. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-05-13perf: let's disable symlinks when they are not availableLibravatar Johannes Schindelin1-1/+4
We already have a perfectly fine prereq to tell us whether it is safe to use symlinks. So let's use it. This fixes the performance tests in Git for Windows' SDK, where symlinks are not really available ([*1*]). This is not an issue with Git for Windows itself because it configures core.symlinks=false in its system config. However, the system config is disabled for the performance tests, for obvious reasons: we want them to be independent of the vagaries of any local configuration. Footnote *1*: Windows has symbolic links. Git for Windows disables them by default, though (for example: in standard setups, non-admins lack the privilege to create symbolic links). For details, see https://github.com/git-for-windows/git/wiki/Symbolic-Links Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-01-25resolve_gitlink_ref: ignore non-repository pathsLibravatar Jeff King1-0/+4
When we want to look up a submodule ref, we use get_ref_cache(path) to find or auto-create its ref cache. But if we feed a path that isn't actually a git repository, we blindly create the ref cache, and then may die deeper in the code when we try to access it. This is a problem because many callers speculatively feed us a path that looks vaguely like a repository, and expect us to tell them when it is not. This patch teaches resolve_gitlink_ref to reject non-repository paths without creating a ref_cache. This avoids the die(), and also performs better if you have a large number of these faux-submodule directories (because the ref_cache lookup is linear, under the assumption that there won't be a large number of submodules). To accomplish this, we also break get_ref_cache into two pieces: the lookup and auto-creation (the latter is lumped into create_ref_cache). This lets us first cheaply ask our cache "is it a submodule we know about?" If so, we can avoid repeating our filesystem lookup. So lookups of real submodules are not penalized; they examine the submodule's .git directory only once. The test in t3000 demonstrates a case where this improves correctness (we used to just die). The new perf case in p7300 shows off the speed improvement in an admittedly pathological repository: Test HEAD^ HEAD ---------------------------------------------------------------- 7300.4: ls-files -o 66.97(66.15+0.87) 0.33(0.08+0.24) -99.5% Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-11-06filter-branch: skip index read/write when possibleLibravatar Jeff King1-0/+19
If the user specifies an index filter but not a tree filter, filter-branch cleverly avoids checking out the tree entirely. But we don't do the next level of optimization: if you have no index or tree filter, we do not need to read the index at all. This can greatly speed up cases where we are only changing the commit objects (e.g., cementing a graft into place). Here are numbers from the newly-added perf test: Test HEAD^ HEAD --------------------------------------------------------------- 7000.2: noop filter 13.81(4.95+0.83) 5.43(0.42+0.43) -60.7% Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-10-15Merge branch 'sb/perf-without-installed-git'Libravatar Junio C Hamano1-0/+1
Performance-measurement tests did not work without an installed Git. * sb/perf-without-installed-git: t/perf: make runner work even if Git is not installed
2015-09-25t/perf: make runner work even if Git is not installedLibravatar Stephan Beyer1-0/+1
aggregate.perl did not work when Git.pm is not installed to a directory contained in the default Perl library path list or PERLLIB. This commit prepends the Perl library path of the current Git source tree to enable this. Note that this commit adds a hard-coded relative path use lib '../../perl/blib/lib'; instead of the flexible environment-based variant use lib (split(/:/, $ENV{GITPERLLIB})); which is used in tests written in Perl. The hard-coded variant is used because the whole performance test framework does it that way (and GITPERLLIB is not set there). Signed-off-by: Stephan Beyer <s-beyer@gmx.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-08-03Merge branch 'ee/clean-remove-dirs'Libravatar Junio C Hamano1-0/+31
Replace "is this subdirectory a separate repository that should not be touched?" check "git clean" does by checking if it has .git/HEAD using the submodule-related code with a more optimized check. * ee/clean-remove-dirs: read_gitfile_gently: fix use-after-free clean: improve performance when removing lots of directories p7300: add performance tests for clean t7300: add tests to document behavior of clean and nested git setup: sanity check file size in read_gitfile_gently setup: add gentle version of read_gitfile
2015-06-26p5310: Fix broken && chain in performance testLibravatar Stefan Beller1-3/+3
Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-06-15p7300: add performance tests for cleanLibravatar Erik Elfström1-0/+31
The tests are run in dry-run mode to avoid having to restore the test directories for each timed iteration. Using dry-run is an acceptable compromise since we are mostly interested in the initial computation of what to clean and not so much in the cleaning it self. Signed-off-by: Erik Elfström <erik.elfstrom@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-03-25perf-lib: fix ignored exit code inside loopLibravatar Jeff King1-1/+1
When copying the test repository, we try to detect whether the copy succeeded. However, most of the heavy lifting is done inside a for loop, where our "break" will lose the exit code of the failing "cp". We can take advantage of the fact that we are in a subshell, and just "exit 1" to break out with a code. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-06-25Merge branch 'jk/repack-pack-writebitmaps-config'Libravatar Junio C Hamano1-0/+3
* jk/repack-pack-writebitmaps-config: t7700: drop explicit --no-pack-kept-objects from .keep test repack: introduce repack.writeBitmaps config option repack: simplify handling of --write-bitmap-index pack-objects: stop respecting pack.writebitmaps
2014-06-10repack: introduce repack.writeBitmaps config optionLibravatar Jeff King1-0/+3
We currently have pack.writeBitmaps, which originally operated at the pack-objects level. This should really have been a repack.* option from day one. Let's give it the more sensible name, but keep the old version as a deprecated synonym. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-04-23p5302-pack-index.sh: use the $( ... ) construct for command substitutionLibravatar Elia Pinto1-1/+1
The Git CodingGuidelines prefer the $(...) construct for command substitution instead of using the backquotes `...`. The backquoted form is the traditional method for command substitution, and is supported by POSIX. However, all but the simplest uses become complicated quickly. In particular, embedded command substitutions and/or the use of double quotes require careful escaping with the backslash character. The patch was generated by: for _f in $(find . -name "*.sh") do sed -i 's@`\(.*\)`@$(\1)@g' ${_f} done and then carefully proof-read. Signed-off-by: Elia Pinto <gitter.spiros@gmail.com> Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-02-27Merge branch 'jk/pack-bitmap'Libravatar Junio C Hamano1-0/+57
Borrow the bitmap index into packfiles from JGit to speed up enumeration of objects involved in a commit range without having to fully traverse the history. * jk/pack-bitmap: (26 commits) ewah: unconditionally ntohll ewah data ewah: support platforms that require aligned reads read-cache: use get_be32 instead of hand-rolled ntoh_l block-sha1: factor out get_be and put_be wrappers do not discard revindex when re-preparing packfiles pack-bitmap: implement optional name_hash cache t/perf: add tests for pack bitmaps t: add basic bitmap functionality tests count-objects: recognize .bitmap in garbage-checking repack: consider bitmaps when performing repacks repack: handle optional files created by pack-objects repack: turn exts array into array-of-struct repack: stop using magic number for ARRAY_SIZE(exts) pack-objects: implement bitmap writing rev-list: add bitmap mode to speed up object lists pack-objects: use bitmaps when packing objects pack-objects: split add_object_entry pack-bitmap: add support for bitmap indexes documentation: add documentation for the bitmap format ewah: compressed bitmap implementation ...
2014-01-27Merge branch 'jk/mark-edges-uninteresting'Libravatar Junio C Hamano1-0/+12
Fix performance regression in v1.8.4.x and later. * jk/mark-edges-uninteresting: list-objects: only look at cmdline trees with edge_hint t/perf: time rev-list with UNINTERESTING commits
2014-01-21t/perf: time rev-list with UNINTERESTING commitsLibravatar Jeff King1-0/+12
We time a straight "rev-list --all" and its "--object" counterpart, both going all the way to the root. However, we do not time a partial history walk. This patch adds an extreme case: a walk over a very small slice of history, but with a very large set of UNINTERESTING tips. This is similar to the connectivity check run by git on a small fetch, or the walk done by any pre-receive hooks that want to check incoming commits. This test reveals a performance regression in git v1.8.4.2, caused by fbd4a70 (list-objects: mark more commits as edges in mark_edges_uninteresting, 2013-08-16): Test fbd4a703^ fbd4a703 ------------------------------------------------------------------------------------------ 0001.1: rev-list --all 0.69(0.67+0.02) 0.69(0.68+0.01) +0.0% 0001.2: rev-list --all --objects 3.47(3.44+0.02) 3.48(3.44+0.03) +0.3% 0001.4: rev-list $commit --not --all 0.04(0.04+0.00) 0.04(0.04+0.00) +0.0% 0001.5: rev-list --objects $commit --not --all 0.04(0.03+0.00) 0.27(0.24+0.02) +575.0% Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-12-30pack-bitmap: implement optional name_hash cacheLibravatar Vicent Marti1-1/+2
When we use pack bitmaps rather than walking the object graph, we end up with the list of objects to include in the packfile, but we do not know the path at which any tree or blob objects would be found. In a recently packed repository, this is fine. A fetch would use the paths only as a heuristic in the delta compression phase, and a fully packed repository should not need to do much delta compression. As time passes, though, we may acquire more objects on top of our large bitmapped pack. If clients fetch frequently, then they never even look at the bitmapped history, and all works as usual. However, a client who has not fetched since the last bitmap repack will have "have" tips in the bitmapped history, but "want" newer objects. The bitmaps themselves degrade gracefully in this circumstance. We manually walk the more recent bits of history, and then use bitmaps when we hit them. But we would also like to perform delta compression between the newer objects and the bitmapped objects (both to delta against what we know the user already has, but also between "new" and "old" objects that the user is fetching). The lack of pathnames makes our delta heuristics much less effective. This patch adds an optional cache of the 32-bit name_hash values to the end of the bitmap file. If present, a reader can use it to match bitmapped and non-bitmapped names during delta compression. Here are perf results for p5310: Test origin/master HEAD^ HEAD ------------------------------------------------------------------------------------------------- 5310.2: repack to disk 36.81(37.82+1.43) 47.70(48.74+1.41) +29.6% 47.75(48.70+1.51) +29.7% 5310.3: simulated clone 30.78(29.70+2.14) 1.08(0.97+0.10) -96.5% 1.07(0.94+0.12) -96.5% 5310.4: simulated fetch 3.16(6.10+0.08) 3.54(10.65+0.06) +12.0% 1.70(3.07+0.06) -46.2% 5310.6: partial bitmap 36.76(43.19+1.81) 6.71(11.25+0.76) -81.7% 4.08(6.26+0.46) -88.9% You can see that the time spent on an incremental fetch goes down, as our delta heuristics are able to do their work. And we save time on the partial bitmap clone for the same reason. Signed-off-by: Vicent Marti <tanoku@gmail.com> Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-12-30t/perf: add tests for pack bitmapsLibravatar Jeff King1-0/+56
This adds a few basic perf tests for the pack bitmap code to show off its improvements. The tests are: 1. How long does it take to do a repack (it gets slower with bitmaps, since we have to do extra work)? 2. How long does it take to do a clone (it gets faster with bitmaps)? 3. How does a small fetch perform when we've just repacked? 4. How does a clone perform when we haven't repacked since a week of pushes? Here are results against linux.git: Test origin/master this tree ----------------------------------------------------------------------- 5310.2: repack to disk 33.64(32.64+2.04) 67.67(66.75+1.84) +101.2% 5310.3: simulated clone 30.49(29.47+2.05) 1.20(1.10+0.10) -96.1% 5310.4: simulated fetch 3.49(6.79+0.06) 5.57(22.35+0.07) +59.6% 5310.6: partial bitmap 36.70(43.87+1.81) 8.18(21.92+0.73) -77.7% You can see that we do take longer to repack, but we do way better for further clones. A small fetch performs a bit worse, as we spend way more time on delta compression (note the heavy user CPU time, as we have 8 threads) due to the lack of name hashes for the bitmapped objects. The final test shows how the bitmaps degrade over time between packs. There's still a significant speedup over the non-bitmap case, but we don't do quite as well (we have to spend time accessing the "new" objects the old fashioned way, including delta compression). Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-12-27Merge branch 'tg/diff-no-index-refactor'Libravatar Junio C Hamano1-0/+22
"git diff ../else/where/A ../else/where/B" when ../else/where is clearly outside the repository, and "git diff --no-index A B", do not have to look at the index at all, but we used to read the index unconditionally. * tg/diff-no-index-refactor: diff: avoid some nesting diff: add test for --no-index executed outside repo diff: don't read index when --no-index is given diff: move no-index detection to builtin/diff.c
2013-12-12diff: don't read index when --no-index is givenLibravatar Thomas Gummerer1-0/+22
git diff --no-index ... currently reads the index, during setup, when calling gitmodules_config(). This results in worse performance when the index is not actually needed. This patch avoids calling gitmodules_config() when the --no-index option is given. The times for executing "git diff --no-index" in the WebKit repository are improved as follows: Test HEAD~3 HEAD ------------------------------------------------------------------ 4001.1: diff --no-index 0.24(0.15+0.09) 0.01(0.00+0.00) -95.8% An additional improvement of this patch is that "git diff --no-index" no longer breaks when the index file is corrupt, which makes it possible to use it for investigating the broken repository. To improve the possible usage as investigation tool for broken repositories, setup_git_directory_gently() is also not called when the --no-index option is given. Also add a test to guard against future breakages, and a performance test to show the improvements. Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-11-26test: replace shebangs with descriptions in shell librariesLibravatar Jonathan Nieder1-1/+3
A #! line in these files is misleading, since these scriptlets are meant to be sourced with '.' (using whatever shell sources them) instead of run directly using the interpreter named on the #! line. Removing the #! line shouldn't hurt syntax highlighting since these files have filenames ending with '.sh'. For documentation, add a brief description of how the files are meant to be used in place of the shebang line. Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-08-01Merge branch 'lf/echo-n-is-not-portable'Libravatar Junio C Hamano1-2/+2
* lf/echo-n-is-not-portable: Avoid using `echo -n` anywhere
2013-07-29Avoid using `echo -n` anywhereLibravatar Lukas Fleischer1-2/+2
`echo -n` is non-portable. The POSIX specification says: Conforming applications that wish to do prompting without <newline> characters or that could possibly be expecting to echo a -n, should use the printf utility derived from the Ninth Edition system. Since all of the affected shell scripts use a POSIX shell shebang, replace `echo -n` invocations with printf. Signed-off-by: Lukas Fleischer <git@cryptocrack.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-07-05Merge branch 'tr/test-v-and-v-subtest-only'Libravatar Junio C Hamano1-1/+2
Allows N instances of tests run in parallel, each running 1/N parts of the test suite under Valgrind, to speed things up. * tr/test-v-and-v-subtest-only: perf-lib: fix start/stop of perf tests test-lib: support running tests under valgrind in parallel test-lib: allow prefixing a custom string before "ok N" etc. test-lib: valgrind for only tests matching a pattern test-lib: verbose mode for only tests matching a pattern test-lib: self-test that --verbose works test-lib: rearrange start/end of test_expect_* and test_skip test-lib: refactor $GIT_SKIP_TESTS matching test-lib: enable MALLOC_* for the actual tests
2013-06-29perf-lib: fix start/stop of perf testsLibravatar Thomas Gummerer1-1/+2
ae75342 test-lib: rearrange start/end of test_expect_* and test_skip changed the way tests are started/stopped, but did not update the perf tests. They were therefore giving the wrong output, because of the wrong test count. Fix this by starting and stopping the tests correctly. Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com> Acked-by: Thomas Rast <trast@inf.ethz.ch> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-06-22Documentation: Update 'linux-2.6.git' -> 'linux.git'Libravatar W. Trevor King1-1/+1
The 3.x tree has been out for a while now. The -2.6 repository name survived the initial release [1], but kernel.org now only lists 'linux.git' (for aegl as well as torvalds) [2]. [1]: http://article.gmane.org/gmane.linux.kernel/1147422 On 2011-05-30 01:47:57 GMT, Linus Torvalds wrote: > ... yes, that means that my git tree is still called > "linux-2.6.git" on kernel.org. [2]: http://git.kernel.org/cgit/ Signed-off-by: W. Trevor King <wking@tremily.us> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-06-20Merge branch 'rs/discard-index-discard-array'Libravatar Junio C Hamano1-0/+14
* rs/discard-index-discard-array: read-cache: free cache in discard_index read-cache: add simple performance test
2013-06-09read-cache: add simple performance testLibravatar René Scharfe1-0/+14
Add the helper test-read-cache, which can be used to call read_cache and discard_cache in a loop as well as a performance check based on it. Signed-off-by: René Scharfe <rene.scharfe@lsrfire.ath.cx> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-06-02Merge branch 'tr/line-log'Libravatar Junio C Hamano1-0/+34
* tr/line-log: git-log(1): remove --full-line-diff description line-log: fix documentation formatting log -L: improve comments in process_all_files() log -L: store the path instead of a diff_filespec log -L: test merge of parallel modify/rename t4211: pass -M to 'git log -M -L...' test log -L: fix overlapping input ranges log -L: check range set invariants when we look it up Speed up log -L... -M log -L: :pattern:file syntax to find by funcname Implement line-history search (git log -L) Export rewrite_parents() for 'log -L' Refactor parse_loc
2013-03-28Implement line-history search (git log -L)Libravatar Thomas Rast1-0/+34
This is a rewrite of much of Bo's work, mainly in an effort to split it into smaller, easier to understand routines. The algorithm is built around the struct range_set, which encodes a series of line ranges as intervals [a,b). This is used in two contexts: * A set of lines we are tracking (which will change as we dig through history). * To encode diffs, as pairs of ranges. The main routine is range_set_map_across_diff(). It processes the diff between a commit C and some parent P. It determines which diff hunks are relevant to the ranges tracked in C, and computes the new ranges for P. The algorithm is then simply to process history in topological order from newest to oldest, computing ranges and (partial) diffs. At branch points, we need to merge the ranges we are watching. We will find that many commits do not affect the chosen ranges, and mark them TREESAME (in addition to those already filtered by pathspec limiting). Another pass of history simplification then gets rid of such commits. This is wired as an extra filtering pass in the log machinery. This currently only reduces code duplication, but should allow for other simplifications and options to be used. Finally, we hook a diff printer into the output chain. Ideally we would wire directly into the diff logic, to optionally use features like word diff. However, that will require some major reworking of the diff chain, so we completely replace the output with our own diff for now. As this was a GSoC project, and has quite some history by now, many people have helped. In no particular order, thanks go to Jakub Narebski <jnareb@gmail.com> Jens Lehmann <Jens.Lehmann@web.de> Jonathan Nieder <jrnieder@gmail.com> Junio C Hamano <gitster@pobox.com> Ramsay Jones <ramsay@ramsay1.demon.co.uk> Will Palmer <wmpalmer@gmail.com> Apologies to everyone I forgot. Signed-off-by: Bo Yang <struggleyb.nku@gmail.com> Signed-off-by: Thomas Rast <trast@student.ethz.ch> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-03-09perf: update documentation of GIT_PERF_REPEAT_COUNTLibravatar Antoine Pelisse1-1/+1
Currently the documentation of GIT_PERF_REPEAT_COUNT says the default is five while "perf-lib.sh" uses a value of three as a default. Update the documentation so that it is consistent with the code. Signed-off-by: Antoine Pelisse <apelisse@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-10-01Merge branch 'ep/malloc-check-perturb'Libravatar Junio C Hamano1-1/+1
Fixes a brown-paper bag bug. * ep/malloc-check-perturb: MALLOC_CHECK: enable it, unless disabled explicitly
2012-09-26MALLOC_CHECK: enable it, unless disabled explicitlyLibravatar René Scharfe1-1/+1
The malloc checks in tests are currently disabled. Actually evaluate the variable for turning them off and enable them if it's unset. Also use this opportunity to give it the more descriptive and consistent name TEST_NO_MALLOC_CHECK. Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-09-25Merge branch 'ep/malloc-check-perturb'Libravatar Junio C Hamano1-0/+1
Run our test scripts with MALLOC_CHECK_ and MALLOC_PERTURB_, the built-in memory access checking facility GNU libc has. * ep/malloc-check-perturb: MALLOC_CHECK: various clean-ups Add MALLOC_CHECK_ and MALLOC_PERTURB_ libc env to the test suite for detecting heap corruption
2012-09-17MALLOC_CHECK: various clean-upsLibravatar Junio C Hamano1-0/+1
The most important in this change is to avoid affecting anything when test-lib is used from perf-lib. It also limits the effect of the MALLOC_CHECK only to what is run inside the actual test, and uses a fixed MALLOC_PERTURB_ in order to avoid hurting repeatability of the tests. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-09-17t/perf: add "trash directory" to .gitignoreLibravatar Ramkumar Ramachandra1-2/+3
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-08-04tests: Introduce test_seqLibravatar Michał Kiedrowicz1-1/+1
Jeff King wrote: The seq command is GNU-ism, and is missing at least in older BSD releases and their derivatives, not to mention antique commercial Unixes. We already purged it in b3431bc (Don't use seq in tests, not everyone has it, 2007-05-02), but a few new instances have crept in. They went unnoticed because they are in scripts that are not run by default. Replace them with test_seq that is implemented with a Perl snippet (proposed by Jeff). This is better than inlining this snippet everywhere it's needed because it's easier to read and it's easier to change the implementation (e.g. to C) if we ever decide to remove Perl from the test suite. Note that test_seq is not a complete replacement for seq(1). It just has what we need now, in addition that it makes it possible for us to do something like "test_seq a m" if we wanted to in the future. There are also many places that do `for i in 1 2 3 ...` but I'm not sure if it's worth converting them to test_seq. That would introduce running more processes of Perl. Signed-off-by: Michał Kiedrowicz <michal.kiedrowicz@gmail.com> Acked-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-05-14Merge branch 'nd/threaded-index-pack'Libravatar Junio C Hamano1-0/+40
Enables threading in index-pack to resolve base data in parallel. By Nguyễn Thái Ngọc Duy (3) and Ramsay Jones (1) * nd/threaded-index-pack: index-pack: disable threading if NO_PREAD is defined index-pack: support multithreaded delta resolving index-pack: restructure pack processing into three main functions compat/win32/pthread.h: Add an pthread_key_delete() implementation
2012-05-07index-pack: support multithreaded delta resolvingLibravatar Nguyễn Thái Ngọc Duy1-0/+40
This puts delta resolving on each base on a separate thread, one base cache per thread. Per-thread data is grouped in struct thread_local. When running with nr_threads == 1, no pthreads calls are made. The system essentially runs in non-thread mode. An experiment on a Xeon 24 core machine with git.git shows that performance does not increase proportional to the number of cores. So by default, we use maximum 3 cores. Some numbers with --threads from 1 to 16: 1..4 real 0m8.003s 0m5.307s 0m4.321s 0m3.830s user 0m7.720s 0m8.009s 0m8.133s 0m8.305s sys 0m0.224s 0m0.372s 0m0.360s 0m0.360s 5..8 real 0m3.727s 0m3.604s 0m3.332s 0m3.369s user 0m9.361s 0m9.817s 0m9.525s 0m9.769s sys 0m0.584s 0m0.624s 0m0.540s 0m0.560s 9..12 real 0m3.036s 0m3.139s 0m3.177s 0m2.961s user 0m8.977s 0m10.205s 0m9.737s 0m10.073s sys 0m0.596s 0m0.680s 0m0.684s 0m0.680s 13..16 real 0m2.985s 0m2.894s 0m2.975s 0m2.971s user 0m9.825s 0m10.573s 0m10.833s 0m11.361s sys 0m0.788s 0m0.732s 0m0.904s 0m1.016s On an Intel dual core and linux-2.6.git 1..4 real 2m37.789s 2m7.963s 2m0.920s 1m58.213s user 2m28.415s 2m52.325s 2m50.176s 2m41.187s sys 0m7.808s 0m11.181s 0m11.224s 0m10.731s Thanks Ramsay Jones for troubleshooting and support on MinGW platform. Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-03-09p4000: use -3000 when promising -3000Libravatar Thomas Rast1-1/+1
The 'log -3000 (baseline)' test accidentally still used -1000 from an earlier version. Noticed-by: Lawrence Holding <Lawrence.Holding@cubic.com> Signed-off-by: Thomas Rast <trast@student.ethz.ch> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-03-08perf: export some important test-lib variablesLibravatar Thomas Rast2-1/+14
The only bug right now is that $GIT_TEST_CMP is needed for test_cmp to work. However, we also export the three most important paths for tests: TEST_DIRECTORY TRASH_DIRECTORY GIT_BUILD_DIR Since they are available within test_expect_success, a future test writer may expect them to also be defined in test_perf. Signed-off-by: Thomas Rast <trast@student.ethz.ch> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-03-08perf: load test-lib-functions from the correct directoryLibravatar Thomas Rast2-1/+6
Loading it in the subshells still referred to $TEST_DIRECTORY/.., which was only correct in preliminary versions of perf-lib.sh Signed-off-by: Thomas Rast <trast@student.ethz.ch> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-03-06perf: compare diff algorithmsLibravatar Thomas Rast1-0/+29
8c912ee (teach --histogram to diff, 2011-07-12) claimed histogram diff was faster than both Myers and patience. We have since incorporated a performance testing framework, so add a test that compares the various diff tasks performed in a real 'log -p' workload. This does indeed show that histogram diff slightly beats Myers, while patience is much slower than the others. Signed-off-by: Thomas Rast <trast@student.ethz.ch> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-02-17Add a performance test for git-grepLibravatar Thomas Rast1-0/+23
The only catch is that we don't really know what our repo contains, so we have to ignore any possible "not found" status from git-grep. Signed-off-by: Thomas Rast <trast@student.ethz.ch> Signed-off-by: Junio C Hamano <gitster@pobox.com>