summaryrefslogtreecommitdiff
path: root/t/perf/perf-lib.sh
AgeCommit message (Collapse)AuthorFilesLines
2020-12-22t/perf: avoid unnecessary test_export() recursionLibravatar Eric Sunshine1-4/+1
test_export() has been self-recursive since its inception even though a simple for-loop would have served just as well to append its arguments to the `test_export_` variable separated by the pipe character "|". Recently `test_export_` was changed instead to a space-separated list of tokens to be exported, an operation which can be accomplished via a single simple assignment, with no need for looping or recursion. Therefore, simplify the implementation. While at it, take advantage of the fact that variable names to be exported are shell identifiers, thus won't be composed of special characters or whitespace, thus simple a `$*` can be used rather than magical `"$@"`. Signed-off-by: Eric Sunshine <sunshine@sunshineco.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-12-16t/perf: fix test_export() failure with BSD `sed`Libravatar Eric Sunshine1-2/+7
test_perf() runs each test in its own subshell which makes it difficult to persist variables between tests. test_export() addresses this shortcoming by grabbing the values of specified variables after a test runs but before the subshell exits, and writes those values to a file which is loaded into the environment of subsequent tests. To grab the values to be persisted, test_export() pipes the output of the shell's builtin `set` command through `sed` which plucks them out using a regular expression along the lines of `s/^(var1|var2)/.../p`. Unfortunately, though, this use of alternation is not portable. For instance, BSD-lineage `sed` (including macOS `sed`) does not support it in the default "basic regular expression" mode (BRE). It may be possible to enable "extended regular expression" mode (ERE) in some cases with `sed -E`, however, `-E` is neither portable nor part of POSIX. Fortunately, alternation is unnecessary in this case and can easily be avoided, so replace it with a series of simple expressions such as `s/^var1/.../p;s/^var2/.../p`. While at it, tighten the expressions so they match the variable names exactly rather than matching prefixes (i.e. use `s/^var1=/.../p`). If the requirements of test_export() become more complex in the future, then an alternative would be to replace `sed` with `perl` which supports alternation on all platforms, however, the simple elimination of alternation via multiple `sed` expressions suffices for the present. Reported-by: Sangeeta <sangunb09@gmail.com> Diagnosed-by: Philippe Blain <levraiphilippeblain@gmail.com> Signed-off-by: Eric Sunshine <sunshine@sunshineco.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-08-21p5302: disable thread-count parameter tests by defaultLibravatar Jeff King1-0/+2
The primary function of the perf suite is to detect regressions (or improvements) between versions of Git. The only numbers we show a direct comparison for are timings between the same test run on two different versions. However, it can sometimes be used to collect other information. For instance, p5302 runs the same index-pack operation with different thread counts. The output doesn't directly compare these, but anybody interested in working on index-pack can manually compare the results. For a normal regression run of the full perf-suite, though, this incurs a significant cost to generate numbers nobody will actually look at; about 25% of the total time of the test suite is spent in p5302. And the low-thread-count runs are the most expensive part of it, since they're (unsurprisingly) not using as many threads. Let's skip these tests by default, but make it possible for people working on index-pack to still run them by setting an environment variable. Rather than make this specific to p5302, let's introduce a generic mechanism. This makes it possible to run the full suite with every possible test if somebody really wants to burn some CPU. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-11-27perf-lib: use a single filename for all measurement typesLibravatar Jeff King1-2/+2
The perf tests write files recording the results of tests. These results are later aggregated by 'aggregate.perl'. If the tests are run multiple times, those results are overwritten by the new results. This works just fine as long as there are only perf tests measuring the times, whose results are stored in "$base".times files. However 22bec79d1a ("t/perf: add infrastructure for measuring sizes", 2018-08-17) introduced a new type of test for measuring the size of something. The results of this are written to "$base".size files. "$base" is essentially made up of the basename of the script plus the test number. So if test numbers shift because a new test was introduced earlier in the script we might end up with both a ".times" and a ".size" file for the same test. In the aggregation script the ".times" file is preferred over the ".size" file, so some size tests might end with performance numbers from a previous run of the test. This is mainly relevant when writing perf tests that check both performance and sizes, and can get quite confusing during developement. We could fix this by doing a more thorough job of cleaning out old ".times" and ".size" files before running each test. However, an even easier solution is to just use the same filename for both types of measurement, meaning we'll always overwrite the previous result. We don't even need to change the file format to distinguish the two; aggregate.perl already decides which is which based on a regex of the content (this may become ambiguous if we add new types in the future, but we could easily add a header field to the file at that point). Based on an initial patch from Thomas Gummerer, who discovered the problem and did all of the analysis (which I stole for the commit message above): https://public-inbox.org/git/20191119185047.8550-1-t.gummerer@gmail.com/ Helped-by: Thomas Gummerer <t.gummerer@gmail.com> Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-05-08perf-lib.sh: forbid the use of GIT_TEST_INSTALLEDLibravatar Ævar Arnfjörð Bjarmason1-0/+11
As noted in preceding commits setting GIT_TEST_INSTALLED has never been supported or documented, and as noted in an earlier t/perf/README change to the extent that it's been documented nobody's notices that the example hasn't worked since 3c8f12c96c ("test-lib: reorder and include GIT-BUILD-OPTIONS a lot earlier", 2012-06-24). We could directly support GIT_TEST_INSTALLED for invocations without the "run" script, such as: GIT_TEST_INSTALLED=../../ ./p0000-perf-lib-sanity.sh GIT_TEST_INSTALLED=/home/avar/g/git ./p0000-perf-lib-sanity.sh But while not having this "error" will "work", it won't write the the resulting "test-results/*" files to the right place, and thus a subsequent call to aggregate.perl won't work as expected. Let's just tell the user that they need to use the "run" script, which'll correctly deal with this and set the right PERF_RESULTS_PREFIX. If someone's in desperate need of bypassing "run" for whatever reason they can trivially do so by setting "PERF_SET_GIT_TEST_INSTALLED", but not we won't have people who expect GIT_TEST_INSTALLED to just work wondering why their aggregation doesn't work, even though they're running the right "git". Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
2019-05-08perf-lib.sh: remove GIT_TEST_INSTALLED from perf-lib.shLibravatar Ævar Arnfjörð Bjarmason1-14/+1
Follow-up my preceding change which fixed the immediate "./run <revisions>" regression in 0baf78e7bc ("perf-lib.sh: rely on test-lib.sh for --tee handling", 2019-03-15) and entirely get rid of GIT_TEST_INSTALLED from perf-lib.sh (and aggregate.perl). As noted in that change the dance we're doing with GIT_TEST_INSTALLED perf-lib.sh isn't necessary, but there I was doing the most minimal set of changes to quickly fix a regression. But it's much simpler to never deal with the "GIT_TEST_INSTALLED" we were setting in perf-lib.sh at all. Instead the run_dirs_helper() sets the previously inferred $PERF_RESULTS_PREFIX directly. Setting this at the callsite that's already best positioned to exhaustively know about all the different cases we need to handle where PERF_RESULTS_PREFIX isn't what we want already (the empty string) makes the most sense. In one-off cases like: ./run ./p0000-perf-lib-sanity.sh ./p0000-perf-lib-sanity.sh We'll just do the right thing because PERF_RESULTS_PREFIX will be empty, and test-lib.sh takes care of finding where our git is. Any refactoring of this code needs to change both the shell code and the Perl code in aggregate.perl, because when running e.g.: ./run ../../ -- <test> The "../../" path to a relative bindir needs to be munged to a filename containing the results, and critically aggregate.perl does not get passed the path to those aggregations, just "../..". Let's fix cases where aggregate.perl would print e.g. ".." in its report output for this, and "git" for "/home/avar/g/git", i.e. it would always pick the last element. Now'll always print the full path instead. This also makes the code sturdier, e.g. you can feed "../.." to "./run" and then an absolute path to the aggregate.perl script, as long as the absolute path and "../.." resolved to the same directory printing the aggregation will work. Also simplify the "[_*]" on the RHS of "tr -c", we're trimming everything to "_", so we don't need that. Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
2019-05-08perf-lib.sh: make "./run <revisions>" use the correct gitsLibravatar Ævar Arnfjörð Bjarmason1-0/+4
Fix a really bad regression in 0baf78e7bc ("perf-lib.sh: rely on test-lib.sh for --tee handling", 2019-03-15). Since that change all runs of different <revisions> of git have used the git found in the user's $PATH, e.g. /usr/bin/git instead of the <revision> we just built and wanted to performance test. The problem starts with GIT_TEST_INSTALLED not working like our non-perf tests with the "run" script. I.e. you can't run performance tests against a given installed git. Instead we expect to use it ourselves to point GIT_TEST_INSTALLED to the <revision> we just built. However, we had been relying on '$(cd "$GIT_TEST_INSTALLED" && pwd)' to resolve that relative $GIT_TEST_INSTALLED to an absolute path *before* test-lib.sh was loaded, in cases where it was e.g. "build/<rev>/bin-wrappers" and we wanted "<abs_path>build/...". This change post-dates another proposed solution by a few days[1], I didn't notice that version when I initially wrote this. I'm doing the most minimal thing to solve the regression here, a follow-up change will move this result prefix selection logic entirely into the "run" script. This makes e.g. these cases all work: ./run . $PWD/../../ origin/master origin/next HEAD -- <tests> As well as just a plain one-off: ./run <tests> And, since we're passing down the new GIT_PERF_DIR_MYDIR_REL we make sure the bug relating to aggregate.perl not finding our files as described in 0baf78e7bc doesn't happen again. What *doesn't* work is setting GIT_TEST_INSTALLED to a relative path, this will subtly fail in test-lib.sh. This has always been the case even before 0baf78e7bc, and as documented in t/README the GIT_TEST_INSTALLED variable should be set to an absolute path (needs to be set "to the bindir", which is always absolute), and the "perf" framework expects to munge it itself. Perhaps that should be dealt with in the future to allow manually setting GIT_TEST_INSTALLED, but as a preceding commit showed the user can just use the "run" script, which'll also pick the right output directory for the test results as expected by aggregate.perl. 1. https://public-inbox.org/git/20190502222409.GA15631@sigill.intra.peff.net/ Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
2019-03-18perf-lib.sh: rely on test-lib.sh for --tee handlingLibravatar Jeff King1-23/+11
Since its inception, the perf-lib.sh script has manually handled the "--tee" option (and other options which imply it, like "--valgrind") with a cut-and-pasted block from test-lib.sh. That block has grown stale over the years, and has at least three problems: 1. It uses $SHELL to re-exec the script, whereas the version in test-lib.sh learned to use $TEST_SHELL_PATH. 2. It does an ad-hoc search of the "$*" string, whereas test-lib.sh learned to carefully parse the arguments left to right. 3. It never learned about --verbose-log (which also implies --tee), so it would not trigger for that option. This last one was especially annoying, because t/perf/run uses the GIT_TEST_OPTS from your config.mak to run the perf scripts. So if you've set, say, "-x --verbose-log" there, it will be passed as part of most perf runs. And while this script doesn't recognize the option, the test-lib.sh that we source _does_, and the behavior ends up being much more annoying: - as the comment at the top of the block says, we have to run this tee code early, before we start munging variables (it says GIT_BUILD_DIR, but the problematic variable is actually GIT_TEST_INSTALLED). - since we don't recognize --verbose-log, we don't trigger the block. We go on to munge GIT_TEST_INSTALLED, converting it from a relative to an absolute path. - then we source test-lib.sh, which _does_ recognize --verbose-log. It re-execs the script, which runs again. But this time with an absolute version of GIT_TEST_INSTALLED. - As a result, we copy the absolute version of GIT_TEST_INSTALLED into perf_results_prefix. Instead of writing our results to the expected "test-results/build_1234abcd.p1234-whatever.times", we instead write them to "test-results/_full_path_to_repo_t_perf_build_1234...". The aggregate.perl script doesn't expect this, and so it prints "<missing>" for each result (even though it spent considerable time running the tests!). We can solve all of these in one blow by just deleting our custom handling, and relying on the inclusion of test-lib.sh to handle --tee, --verbose-log, etc. There's one catch, though. We want to handle GIT_TEST_INSTALLED after we've included test-lib.sh, since we want it un-munged in the re-exec'd version of the script. But if we want to convert it from a relative to an absolute path, we must do so before we load test-lib.sh, since it will change our working directory. So we compute the absolute directory first, store it away, then include test-lib.sh, and finally assign to GIT_TEST_INSTALLED as appropriate. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-11-20tests: send "bug in the test script" errors to the script's stderrLibravatar SZEDER Gábor1-2/+2
Some of the functions in our test library check that they were invoked properly with conditions like this: test "$#" = 2 || error "bug in the test script: not 2 parameters to test-expect-success" If this particular condition is triggered, then 'error' will abort the whole test script with a bold red error message [1] right away. However, under certain circumstances the test script will be aborted completely silently, namely if: - a similar condition in a test helper function like 'test_line_count' is triggered, - which is invoked from the test script's "main" shell [2], - and the test script is run manually (i.e. './t1234-foo.sh' as opposed to 'make t1234-foo.sh' or 'make test') [3] - and without the '--verbose' option, because the error message is printed from within 'test_eval_', where standard output is redirected either to /dev/null or to a log file. The only indication that something is wrong is that not all tests in the script are executed and at the end of the test script's output there is no "# passed all N tests" message, which are subtle and can easily go unnoticed, as I had to experience myself. Send these "bug in the test script" error messages directly to the test scripts standard error and thus to the terminal, so those bugs will be much harder to overlook. Instead of updating all ~20 such 'error' calls with a redirection, let's add a BUG() function to 'test-lib.sh', wrapping an 'error' call with the proper redirection and also including the common prefix of those error messages, and convert all those call sites [4] to use this new BUG() function instead. [1] That particular error message from 'test_expect_success' is printed in color only when running with or without '--verbose'; with '--tee' or '--verbose-log' the error is printed without color, but it is printed to the terminal nonetheless. [2] If such a condition is triggered in a subshell of a test, then 'error' won't be able to abort the whole test script, but only the subshell, which in turn causes the test to fail in the usual way, indicating loudly and clearly that something is wrong. [3] Well, 'error' aborts the test script the same way when run manually or by 'make' or 'prove', but both 'make' and 'prove' pay attention to the test script's exit status, and even a silently aborted test script would then trigger those tools' usual noticable error messages. [4] Strictly speaking, not all those 'error' calls need that redirection to send their output to the terminal, see e.g. 'test_expect_success' in the opening example, but I think it's better to be consistent. Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-08-20t/perf: add infrastructure for measuring sizesLibravatar Jeff King1-0/+13
The main objective of scripts in the perf framework is to run "test_perf", which measures the time it takes to run some operation. However, it can also be interesting to see the change in the output size of certain operations. This patch introduces test_size, which records a single numeric output from the test and shows it in the aggregated output (with pretty printing and relative size comparison). Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-08-20t/perf: factor boilerplate out of test_perfLibravatar Jeff King1-26/+35
About half of test_perf() is boilerplate preparing to run _any_ test, and the other half is specifically running a timing test. Let's split it into two functions, so that we can reuse the boilerplate in future commits. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-09-24perf: store subsection results in "test-results/$GIT_PERF_SUBSECTION/"Libravatar Christian Couder1-0/+1
When tests are run for a subsection defined in a config file, it is better if the results for the current subsection are not overwritting the results of a previous subsection. So let's store the results for a subsection in a subdirectory of "test-results/" with the subsection name. The aggregate.perl, when it is run for a subsection, should then aggregate the results found in "test-results/$GIT_PERF_SUBSECTION/". Signed-off-by: Christian Couder <chriscool@tuxfamily.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-09-24perf/run: add get_var_from_env_or_config()Libravatar Christian Couder1-3/+0
Add get_var_from_env_or_config() to easily set variables from a config file if they are defined there and not already set. This can also set them to a default value if one is provided. As an example, use this function to set GIT_PERF_REPEAT_COUNT from the perf.repeatCount config option or from the default value. Signed-off-by: Christian Couder <chriscool@tuxfamily.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-06-05perf: work around the tested repo having an index.lockLibravatar Ævar Arnfjörð Bjarmason1-1/+8
When the tested repo has an index.lock file it should be removed. This file may be present if e.g. git-status previously crashed in that repo, and it will make a lot of git commands fail. Let's try harder and remove the lock. Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-05-12perf: add function to setup a fresh test repoLibravatar Ævar Arnfjörð Bjarmason1-4/+15
Add a function to setup a fresh test repo via 'git init' to compliment the existing functions to copy over a normal & large repo. Some performance tests don't need any existing repository data at all to be significant, e.g. tests which stress glob matches against single pathological revisions or files, which I'm about to add in a subsequent commit. Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Reviewed-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-03-03t/perf: use $MODERN_GIT for all repo-copying stepsLibravatar Jeff King1-2/+2
Since 1a0962dee (t/perf: fix regression in testing older versions of git, 2016-06-22), we point "$MODERN_GIT" to a copy of git that matches the t/perf script itself, and which can be used for tasks outside of the actual timings. This is needed because the setup done by perf scripts keeps moving forward in time, and may use features that the older versions of git we are testing do not have. That commit used $MODERN_GIT to fix a case where we relied on the relatively recent --git-path option. But if you go back further still, there are more problems. Since 7501b5921 (perf: make the tests work in worktrees, 2016-05-13), we use "git -C", but versions of git older than 44e1e4d67 (git: run in a directory given with -C option, 2013-09-09) don't know about "-C". So testing an old version of git with a new version of t/perf will fail the setup step. We can fix this by using $MODERN_GIT during the setup; there's no need to use the antique version, since it doesn't affect the timings. Likewise, we'll adjust the "init" invocation; antique versions of git called this "init-db". Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-07-11Merge branch 'jk/perf-any-version'Libravatar Junio C Hamano1-1/+4
Allow t/perf framework to use the features from the most recent version of Git even when testing an older installed version. * jk/perf-any-version: p4211: explicitly disable renames in no-rename test t/perf: fix regression in testing older versions of git
2016-06-22t/perf: fix regression in testing older versions of gitLibravatar Jeff King1-1/+4
Commit 7501b59 (perf: make the tests work in worktrees, 2016-05-13) introduced the use of "git rev-parse --git-path" in the perf-lib setup code. Because the to-be-tested version of git is at the front of the $PATH when this code runs, this means we cannot use modern versions of t/perf to test versions of git older than v2.5.0 (when that option was introduced). This is a symptom of a more general problem. The t/perf suite is essentially independent of git versions, and ideally we would be able to run the most modern and complete set of tests across many historical versions (to see how they compare). But any setup code they run is therefore required to use the lowest common denominator we expect to test. So let's introduce a new variable, $MODERN_GIT, that we can use both in perf-lib and in the test setup to get a reliable set of git features (we might change git and break some tests, of course, but $MODERN_GIT is tied to the same version of git as the t/perf scripts, so they can be fixed or adjusted together). This commit fixes the "--git-path" case, but does not mass-convert existing setup code to use $MODERN_GIT. Most setup code is fairly vanilla and will work with effectively all versions. But now the tool is there to fix any other issues we find going forward. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-06-21perf: accommodate for MacOSXLibravatar Johannes Schindelin1-1/+5
As this developer has no access to MacOSX developer setups anymore, Travis becomes the best bet to run performance tests on that OS. However, on MacOSX /usr/bin/time is that good old BSD executable that no Linux user cares about, as demonstrated by the perf-lib.sh's use of GNU-ish extensions. And by the hard-coded path. Let's just work around this issue by using gtime on MacOSX, the Homebrew-provided GNU implementation onto which pretty much every MacOSX power user falls back anyway. To help other developers use Travis to run performance tests on MacOSX, the .travis.yml file now sports a commented-out line that installs GNU time via Homebrew. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Reviewed-by: Lars Schneider <larsxschneider@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-05-31perf: make the tests work without a worktreeLibravatar René Scharfe1-1/+4
In regular repositories $source_git and $objects_dir contain relative paths based on $source. Go there to allow cp to resolve them. Signed-off-by: Rene Scharfe <l.s.r@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-05-13perf: make the tests work in worktreesLibravatar Johannes Schindelin1-7/+7
This patch makes perf-lib.sh more robust so that it can run correctly even inside a worktree. For example, it assumed that $GIT_DIR/objects is the objects directory (which is not the case for worktrees) and it used the commondir file verbatim, even if it contained a relative path. Furthermore, the setup code expected `git rev-parse --git-dir` to spit out a relative path, which is also not true for worktrees. Let's just change the code to accept both relative and absolute paths, by avoiding the `cd` into the copied working directory. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-05-13perf: let's disable symlinks when they are not availableLibravatar Johannes Schindelin1-1/+4
We already have a perfectly fine prereq to tell us whether it is safe to use symlinks. So let's use it. This fixes the performance tests in Git for Windows' SDK, where symlinks are not really available ([*1*]). This is not an issue with Git for Windows itself because it configures core.symlinks=false in its system config. However, the system config is disabled for the performance tests, for obvious reasons: we want them to be independent of the vagaries of any local configuration. Footnote *1*: Windows has symbolic links. Git for Windows disables them by default, though (for example: in standard setups, non-admins lack the privilege to create symbolic links). For details, see https://github.com/git-for-windows/git/wiki/Symbolic-Links Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-03-25perf-lib: fix ignored exit code inside loopLibravatar Jeff King1-1/+1
When copying the test repository, we try to detect whether the copy succeeded. However, most of the heavy lifting is done inside a for loop, where our "break" will lose the exit code of the failing "cp". We can take advantage of the fact that we are in a subshell, and just "exit 1" to break out with a code. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-11-26test: replace shebangs with descriptions in shell librariesLibravatar Jonathan Nieder1-1/+3
A #! line in these files is misleading, since these scriptlets are meant to be sourced with '.' (using whatever shell sources them) instead of run directly using the interpreter named on the #! line. Removing the #! line shouldn't hurt syntax highlighting since these files have filenames ending with '.sh'. For documentation, add a brief description of how the files are meant to be used in place of the shebang line. Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-08-01Merge branch 'lf/echo-n-is-not-portable'Libravatar Junio C Hamano1-2/+2
* lf/echo-n-is-not-portable: Avoid using `echo -n` anywhere
2013-07-29Avoid using `echo -n` anywhereLibravatar Lukas Fleischer1-2/+2
`echo -n` is non-portable. The POSIX specification says: Conforming applications that wish to do prompting without <newline> characters or that could possibly be expecting to echo a -n, should use the printf utility derived from the Ninth Edition system. Since all of the affected shell scripts use a POSIX shell shebang, replace `echo -n` invocations with printf. Signed-off-by: Lukas Fleischer <git@cryptocrack.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-06-29perf-lib: fix start/stop of perf testsLibravatar Thomas Gummerer1-1/+2
ae75342 test-lib: rearrange start/end of test_expect_* and test_skip changed the way tests are started/stopped, but did not update the perf tests. They were therefore giving the wrong output, because of the wrong test count. Fix this by starting and stopping the tests correctly. Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com> Acked-by: Thomas Rast <trast@inf.ethz.ch> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-09-26MALLOC_CHECK: enable it, unless disabled explicitlyLibravatar René Scharfe1-1/+1
The malloc checks in tests are currently disabled. Actually evaluate the variable for turning them off and enable them if it's unset. Also use this opportunity to give it the more descriptive and consistent name TEST_NO_MALLOC_CHECK. Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-09-17MALLOC_CHECK: various clean-upsLibravatar Junio C Hamano1-0/+1
The most important in this change is to avoid affecting anything when test-lib is used from perf-lib. It also limits the effect of the MALLOC_CHECK only to what is run inside the actual test, and uses a fixed MALLOC_PERTURB_ in order to avoid hurting repeatability of the tests. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-08-04tests: Introduce test_seqLibravatar Michał Kiedrowicz1-1/+1
Jeff King wrote: The seq command is GNU-ism, and is missing at least in older BSD releases and their derivatives, not to mention antique commercial Unixes. We already purged it in b3431bc (Don't use seq in tests, not everyone has it, 2007-05-02), but a few new instances have crept in. They went unnoticed because they are in scripts that are not run by default. Replace them with test_seq that is implemented with a Perl snippet (proposed by Jeff). This is better than inlining this snippet everywhere it's needed because it's easier to read and it's easier to change the implementation (e.g. to C) if we ever decide to remove Perl from the test suite. Note that test_seq is not a complete replacement for seq(1). It just has what we need now, in addition that it makes it possible for us to do something like "test_seq a m" if we wanted to in the future. There are also many places that do `for i in 1 2 3 ...` but I'm not sure if it's worth converting them to test_seq. That would introduce running more processes of Perl. Signed-off-by: Michał Kiedrowicz <michal.kiedrowicz@gmail.com> Acked-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-03-08perf: export some important test-lib variablesLibravatar Thomas Rast1-0/+4
The only bug right now is that $GIT_TEST_CMP is needed for test_cmp to work. However, we also export the three most important paths for tests: TEST_DIRECTORY TRASH_DIRECTORY GIT_BUILD_DIR Since they are available within test_expect_success, a future test writer may expect them to also be defined in test_perf. Signed-off-by: Thomas Rast <trast@student.ethz.ch> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-03-08perf: load test-lib-functions from the correct directoryLibravatar Thomas Rast1-1/+1
Loading it in the subshells still referred to $TEST_DIRECTORY/.., which was only correct in preliminary versions of perf-lib.sh Signed-off-by: Thomas Rast <trast@student.ethz.ch> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-02-17Introduce a performance testing frameworkLibravatar Thomas Rast1-0/+198
This introduces a performance testing framework under t/perf/. It tries to be as close to the test-lib.sh infrastructure as possible, and thus should be easy to get used to for git developers. The following points were considered for the implementation: 1. You usually want to compare arbitrary revisions/build trees against each other. They may not have the performance test under consideration, or even the perf-lib.sh infrastructure. To cope with this, the 'run' script lets you specify arbitrary build dirs and revisions. It even automatically builds the revisions if it doesn't have them at hand yet. 2. Usually you would not want to run all tests. It would take too long anyway. The 'run' script lets you specify which tests to run; or you can also do it manually. There is a Makefile for discoverability and 'make clean', but it is not meant for real-world use. 3. Creating test repos from scratch in every test is extremely time-consuming, and shipping or downloading such large/weird repos is out of the question. We leave this decision to the user. Two different sizes of test repos can be configured, and the scripts just copy one or more of those (using hardlinks for the object store). By default it tries to use the build tree's git.git repository. This is fairly fast and versatile. Using a copy instead of a clone preserves many properties that the user may want to test for, such as lots of loose objects, unpacked refs, etc. Signed-off-by: Thomas Rast <trast@student.ethz.ch> Signed-off-by: Junio C Hamano <gitster@pobox.com>