| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Failures within `for` and `while` loops can go unnoticed if not detected
and signaled manually since the loop itself does not abort when a
contained command fails, nor will a failure necessarily be detected when
the loop finishes since the loop returns the exit code of the last
command it ran on the final iteration, which may not be the command
which failed. Therefore, detect and signal failures manually within
loops using the idiom `|| return 1` (or `|| exit 1` within subshells).
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Update the xargs call so that if your large repo contains
symlinks, test-tool chmtime failure does not end the script.
On Linux
Test this tree upstream/master
---------------------------------------------------------------------------------------------------------
7519.4: status (fsmonitor=fsmonitor-watchman) 0.52(0.43+0.10) 0.53(0.49+0.05) +1.9%
7519.5: status -uno (fsmonitor=fsmonitor-watchman) 0.21(0.15+0.07) 0.22(0.13+0.09) +4.8%
7519.6: status -uall (fsmonitor=fsmonitor-watchman) 1.65(0.93+0.71) 1.69(1.03+0.65) +2.4%
7519.7: status (dirty) (fsmonitor=fsmonitor-watchman) 11.99(11.34+1.58) 11.95(11.02+1.79) -0.3%
7519.8: diff (fsmonitor=fsmonitor-watchman) 0.25(0.17+0.26) 0.25(0.18+0.26) +0.0%
7519.9: diff HEAD (fsmonitor=fsmonitor-watchman) 0.39(0.25+0.34) 0.89(0.35+0.74) +128.2%
7519.10: diff -- 0_files (fsmonitor=fsmonitor-watchman) 0.16(0.13+0.04) 0.16(0.12+0.05) +0.0%
7519.11: diff -- 10_files (fsmonitor=fsmonitor-watchman) 0.16(0.12+0.05) 0.16(0.12+0.05) +0.0%
7519.12: diff -- 100_files (fsmonitor=fsmonitor-watchman) 0.16(0.12+0.05) 0.16(0.12+0.05) +0.0%
7519.13: diff -- 1000_files (fsmonitor=fsmonitor-watchman) 0.16(0.11+0.06) 0.16(0.12+0.05) +0.0%
7519.14: diff -- 10000_files (fsmonitor=fsmonitor-watchman) 0.18(0.13+0.06) 0.17(0.10+0.08) -5.6%
7519.15: add (fsmonitor=fsmonitor-watchman) 2.25(1.53+0.68) 2.25(1.47+0.74) +0.0%
7519.18: status (fsmonitor=disabled) 0.88(0.73+1.03) 0.89(0.67+1.08) +1.1%
7519.19: status -uno (fsmonitor=disabled) 0.45(0.43+0.89) 0.45(0.34+0.98) +0.0%
7519.20: status -uall (fsmonitor=disabled) 1.88(1.16+1.58) 1.88(1.22+1.51) +0.0%
7519.21: status (dirty) (fsmonitor=disabled) 7.53(7.05+2.11) 7.53(6.98+2.04) +0.0%
7519.22: diff (fsmonitor=disabled) 0.42(0.37+0.92) 0.42(0.38+0.91) +0.0%
7519.23: diff HEAD (fsmonitor=disabled) 0.44(0.41+0.90) 0.44(0.40+0.91) +0.0%
7519.24: diff -- 0_files (fsmonitor=disabled) 0.13(0.09+0.05) 0.13(0.09+0.05) +0.0%
7519.25: diff -- 10_files (fsmonitor=disabled) 0.13(0.10+0.04) 0.13(0.10+0.04) +0.0%
7519.26: diff -- 100_files (fsmonitor=disabled) 0.13(0.09+0.05) 0.13(0.10+0.04) +0.0%
7519.27: diff -- 1000_files (fsmonitor=disabled) 0.13(0.09+0.06) 0.13(0.09+0.05) +0.0%
7519.28: diff -- 10000_files (fsmonitor=disabled) 0.14(0.11+0.05) 0.14(0.10+0.05) +0.0%
7519.29: add (fsmonitor=disabled) 2.43(1.61+1.64) 2.43(1.69+1.57) +0.0%
On linux (2.29.2 vs w/ this patch):
nipunn@nipunn-dbx:~/src/server3$ strace -f -c git diff 2>&1 | grep lstat
0.04 0.000063 3 20 6 lstat
nipunn@nipunn-dbx:~/src/server3$ strace -f -c git diff HEAD 2>&1 | grep lstat
94.98 5.242262 10 523783 13 lstat
nipunn@nipunn-dbx:~/src/server3$ strace -f -c ../git/bin-wrappers/git diff 2>&1 | grep lstat
0.38 0.000032 5 7 3 lstat
nipunn@nipunn-dbx:~/src/server3$ strace -f -c ../git/bin-wrappers/git diff HEAD 2>&1 | grep lstat
99.44 0.741892 9 81634 10 lstat
On mac (2.29.2 vs w/ this patch):
nipunn-mbp:server nipunn$ sudo dtruss -L -f -c git diff 2>&1 | grep "^lstat64 "
lstat64 8
nipunn-mbp:server nipunn$ sudo dtruss -L -f -c git diff HEAD 2>&1 | grep "^lstat64 "
lstat64 120242
nipunn-mbp:server nipunn$ sudo dtruss -L -f -c ../git/bin-wrappers/git diff 2>&1 | grep "^lstat64 "
lstat64 4
nipunn-mbp:server nipunn$ sudo dtruss -L -f -c ../git/bin-wrappers/git diff HEAD 2>&1 | grep "^lstat64 "
lstat64 4497
There are still a bunch of lstats - on directories, but not every file. Progress!
Signed-off-by: Nipunn Koorapati <nipunn@dropbox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Preliminary changes to fsmonitor integration.
* jh/fsmonitor-prework:
fsmonitor: refactor initialization of fsmonitor_last_update token
fsmonitor: allow all entries for a folder to be invalidated
fsmonitor: log FSMN token when reading and writing the index
fsmonitor: log invocation of FSMonitor hook to trace2
read-cache: log the number of scanned files to trace2
read-cache: log the number of lstat calls to trace2
preload-index: log the number of lstat calls to trace2
p7519: add trace logging during perf test
p7519: move watchman cleanup earlier in the test
p7519: fix watchman watch-list test on Windows
p7519: do not rely on "xargs -d" in test
|
|
Add optional trace logging to allow us to better compare performance of
various fsmonitor providers and compare results with non-fsmonitor runs.
Currently, this includes Trace2 logging, but may be extended to include
other trace targets, such as GIT_TRACE_FSMONITOR if desired.
Using this logging helped me explain an odd behavior on MacOS where the
kernel was dropping events and causing the hook to Watchman to timeout.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Reviewed-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Shutdown Watchman after the Watchman-based tests and before the block of
"no fsmonitor" tests.
This helps ensure that Watchman cannot affect the test results for the
other.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Reviewed-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Only use the final portion of the test trash directory file name
when verifying that Watchman was started.
On Windows and under the SDK, $GIT_WORKTREE is a cygwin-style
path with forward slashes and a "/c/" drive name. However
`watchman watch-list` reports a proper Windows-style pathname
with drive letters and backslashes. This causes the grep to
fail. Since we don't really care about the full pathname (and
we really don't want to bother with normalizaing them), just see
if the test-name portion of the path is found.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Reviewed-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Convert the test to use a more portable method to update the mtime on a
large number of files under version control.
The Mac version of xargs does not support the "-d" option.
Likewise, the "-0" and "--null" options are not portable.
Furthermore, use `test-tool chmtime` rather than `touch` to update the
mtime to ensure that it is actually updated (especially on file systems
with only whole second resolution).
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Reviewed-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
p7519 measures the performance of the fsmonitor code. To do this, it
uses the installed copy of Watchman. If Watchman isn't installed, a noop
integration script is installed in its place.
When in the latter mode, it is expected that the script should not write
a "last update token": in fact, it doesn't write anything at all since
the script is blank.
Commit 33226af42b (t/perf/fsmonitor: improve error message if typoing
hook name, 2020-10-26) made sure that running 'git update-index
--fsmonitor' did not write anything to stderr, but this is not the case
when using the empty Watchman script, since Git will complain that:
$ which watchman
watchman not found
$ cat .git/hooks/fsmonitor-empty
$ git -c core.fsmonitor=.git/hooks/fsmonitor-empty update-index --fsmonitor
warning: Empty last update token.
Prior to 33226af42b, the output wasn't checked at all, which allowed
this noop mode to work. But, 33226af42b breaks p7519 when running it
without a 'watchman(1)' on your system.
Handle this by only checking that the stderr is empty only when running
with a real watchman executable. Otherwise, assert that the error
message is the expected one when running in the noop mode.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Acked-by: Nipunn Koorapati <nipunn@dropbox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Simplify test and make error messages more clear here.
Per feedback from Junio in
33226af42b (t/perf/fsmonitor: improve error message if typoing hook
name, 2020-10-26)
Signed-off-by: Nipunn Koorapati <nipunn@dropbox.com>
Acked-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This benchmark covers the git status time for a heavily
dirty directory - benchmarking fsmonitor's refresh
When running to compare our perl vs rs-git-fsmonitor - we see that
the perl script incurs significant overhead - further motivation
to provide a faster implementation within git.
7519.7: status (dirty) (fsmonitor=query-watchman) 10.05(7.78+1.56)
7519.20: status (dirty) (fsmonitor=rs-git-fsmonitor) 6.72(4.37+1.64)
7519.33: status (dirty) (fsmonitor=disabled) 5.62(4.24+2.03)
Signed-off-by: Nipunn Koorapati <nipunn@dropbox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Allows for simple perf comparison of different integrations. I ran it
to compare our perl script w/ rs-git-fsmonitor and found 20-30ms of
overhead on every command.
Output looks like this (extra newlines added for readability)
Test this tree
---------------------------------------------------------------------------
7519.4: status (fsmonitor=query-watchman) 0.42(0.37+0.05)
7519.5: status -uno (fsmonitor=query-watchman) 0.19(0.12+0.07)
7519.6: status -uall (fsmonitor=query-watchman) 1.36(0.73+0.62)
7519.7: diff (fsmonitor=query-watchman) 0.14(0.09+0.05)
7519.8: diff -- 0_files (fsmonitor=query-watchman) 0.14(0.11+0.03)
7519.9: diff -- 10_files (fsmonitor=query-watchman) 0.14(0.10+0.04)
7519.10: diff -- 100_files (fsmonitor=query-watchman) 0.14(0.09+0.05)
7519.11: diff -- 1000_files (fsmonitor=query-watchman) 0.14(0.08+0.06)
7519.12: diff -- 10000_files (fsmonitor=query-watchman) 0.14(0.09+0.05)
7519.13: add (fsmonitor=query-watchman) 2.04(1.32+0.66)
7519.16: status (fsmonitor=rs-git-fsmonitor) 0.39(0.32+0.08)
7519.17: status -uno (fsmonitor=rs-git-fsmonitor) 0.17(0.11+0.06)
7519.18: status -uall (fsmonitor=rs-git-fsmonitor) 1.33(0.71+0.61)
7519.19: diff (fsmonitor=rs-git-fsmonitor) 0.11(0.07+0.04)
7519.20: diff -- 0_files (fsmonitor=rs-git-fsmonitor) 0.11(0.09+0.03)
7519.21: diff -- 10_files (fsmonitor=rs-git-fsmonitor) 0.11(0.09+0.03)
7519.22: diff -- 100_files (fsmonitor=rs-git-fsmonitor) 0.11(0.07+0.04)
7519.23: diff -- 1000_files (fsmonitor=rs-git-fsmonitor) 0.11(0.06+0.06)
7519.24: diff -- 10000_files (fsmonitor=rs-git-fsmonitor) 0.11(0.06+0.06)
7519.25: add (fsmonitor=rs-git-fsmonitor) 2.03(1.28+0.69)
7519.28: status (fsmonitor=disabled) 0.77(0.59+0.99)
7519.29: status -uno (fsmonitor=disabled) 0.42(0.33+0.85)
7519.30: status -uall (fsmonitor=disabled) 1.59(1.02+1.34)
7519.31: diff (fsmonitor=disabled) 0.35(0.30+0.81)
7519.32: diff -- 0_files (fsmonitor=disabled) 0.11(0.08+0.04)
7519.33: diff -- 10_files (fsmonitor=disabled) 0.11(0.07+0.04)
7519.34: diff -- 100_files (fsmonitor=disabled) 0.11(0.08+0.03)
7519.35: diff -- 1000_files (fsmonitor=disabled) 0.11(0.10+0.02)
7519.36: diff -- 10000_files (fsmonitor=disabled) 0.12(0.07+0.06)
7519.37: add (fsmonitor=disabled) 2.24(1.48+1.44)
Signed-off-by: Nipunn Koorapati <nipunn@dropbox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Previously, the git add of the previous suiterun would
pollute the numbers in the second run
Before:
Test this tree
-----------------------------------------------------------------------------
7519.4: status (fsmonitor=fsmonitor-watchman) 0.40(0.36+0.04)
7519.5: status -uno (fsmonitor=fsmonitor-watchman) 0.19(0.12+0.07)
7519.6: status -uall (fsmonitor=fsmonitor-watchman) 1.36(0.74+0.61)
7519.7: diff (fsmonitor=fsmonitor-watchman) 0.14(0.10+0.04)
7519.8: diff -- 0_files (fsmonitor=fsmonitor-watchman) 0.14(0.10+0.04)
7519.9: diff -- 10_files (fsmonitor=fsmonitor-watchman) 0.14(0.09+0.05)
7519.10: diff -- 100_files (fsmonitor=fsmonitor-watchman) 0.14(0.10+0.04)
7519.11: diff -- 1000_files (fsmonitor=fsmonitor-watchman) 0.14(0.08+0.06)
7519.12: diff -- 10000_files (fsmonitor=fsmonitor-watchman) 0.14(0.10+0.04)
7519.13: add (fsmonitor=fsmonitor-watchman) 2.03(1.28+0.69)
7519.16: status (fsmonitor=disabled) 0.64(0.49+0.90)
7519.17: status -uno (fsmonitor=disabled) 1.15(0.92+1.00)
7519.18: status -uall (fsmonitor=disabled) 2.32(1.46+1.55)
7519.19: diff (fsmonitor=disabled) 1.44(1.12+1.76)
7519.20: diff -- 0_files (fsmonitor=disabled) 0.11(0.07+0.05)
7519.21: diff -- 10_files (fsmonitor=disabled) 0.11(0.06+0.05)
7519.22: diff -- 100_files (fsmonitor=disabled) 0.11(0.08+0.03)
7519.23: diff -- 1000_files (fsmonitor=disabled) 0.11(0.08+0.04)
7519.24: diff -- 10000_files (fsmonitor=disabled) 0.12(0.06+0.07)
7519.25: add (fsmonitor=disabled) 2.25(1.47+1.47)
After:
Test this tree
-----------------------------------------------------------------------------
7519.4: status (fsmonitor=fsmonitor-watchman) 0.41(0.33+0.09)
7519.5: status -uno (fsmonitor=fsmonitor-watchman) 0.20(0.14+0.07)
7519.6: status -uall (fsmonitor=fsmonitor-watchman) 1.37(0.78+0.58)
7519.7: diff (fsmonitor=fsmonitor-watchman) 0.14(0.10+0.04)
7519.8: diff -- 0_files (fsmonitor=fsmonitor-watchman) 0.14(0.08+0.06)
7519.9: diff -- 10_files (fsmonitor=fsmonitor-watchman) 0.14(0.09+0.05)
7519.10: diff -- 100_files (fsmonitor=fsmonitor-watchman) 0.14(0.10+0.05)
7519.11: diff -- 1000_files (fsmonitor=fsmonitor-watchman) 0.14(0.11+0.04)
7519.12: diff -- 10000_files (fsmonitor=fsmonitor-watchman) 0.14(0.09+0.05)
7519.13: add (fsmonitor=fsmonitor-watchman) 2.04(1.27+0.71)
7519.16: status (fsmonitor=disabled) 0.78(0.59+0.99)
7519.17: status -uno (fsmonitor=disabled) 0.43(0.32+0.88)
7519.18: status -uall (fsmonitor=disabled) 1.58(0.96+1.38)
7519.19: diff (fsmonitor=disabled) 0.36(0.31+0.79)
7519.20: diff -- 0_files (fsmonitor=disabled) 0.11(0.08+0.03)
7519.21: diff -- 10_files (fsmonitor=disabled) 0.11(0.07+0.04)
7519.22: diff -- 100_files (fsmonitor=disabled) 0.11(0.08+0.04)
7519.23: diff -- 1000_files (fsmonitor=disabled) 0.11(0.07+0.05)
7519.24: diff -- 10000_files (fsmonitor=disabled) 0.12(0.08+0.05)
7519.25: add (fsmonitor=disabled) 2.25(1.48+1.47)
Signed-off-by: Nipunn Koorapati <nipunn@dropbox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This prepares for it being called multiple times when
testing different hooks
Signed-off-by: Nipunn Koorapati <nipunn@dropbox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
It is extremely verbose, printing >10K non-useful lines
Signed-off-by: Nipunn Koorapati <nipunn@dropbox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The full name is lengthy and makes it hard to read
Before:
7519.3: status (fsmonitor=/home/nipunn/src/server/.git/hooks/rs-git-fsmonitor) 0.02(0.01+0.00)
After
7519.3: status (fsmonitor=rs-git-fsmonitor) 0.03(0.02+0.00)
Signed-off-by: Nipunn Koorapati <nipunn@dropbox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
There was much duplication here. Prepares for making
changes to the description.
Signed-off-by: Nipunn Koorapati <nipunn@dropbox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Previously - it would silently run the perf suite w/o using
fsmonitor - fsmonitor errors are not hard failures.
Now it errors loudly.
GIT_PERF_7519_FSMONITOR="$HOME/rs-git-fsmonitorr"
./p7519-fsmonitor.sh -i -v
fatal: cannot run /home/nipunn/rs-git-fsmonitorr:
No such file or directory
not ok 2 - setup for fsmonitor
Signed-off-by: Nipunn Koorapati <nipunn@dropbox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
It is only required to be set up once. This prepares for
testing multiple hooks in one invocation.
Signed-off-by: Nipunn Koorapati <nipunn@dropbox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In preparation for testing multiple fsmonitor hooks
Signed-off-by: Nipunn Koorapati <nipunn@dropbox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Test v2.29.0-rc1 this tree
-----------------------------------------------------------------------------------------------------------------
7519.2: status (fsmonitor=.git/hooks/fsmonitor-watchman) 1.48(0.79+0.67) 1.48(0.79+0.67) +0.0%
7519.3: status -uno (fsmonitor=.git/hooks/fsmonitor-watchman) 0.16(0.11+0.05) 0.17(0.13+0.04) +6.3%
7519.4: status -uall (fsmonitor=.git/hooks/fsmonitor-watchman) 1.36(0.77+0.58) 1.37(0.72+0.63) +0.7%
7519.5: diff (fsmonitor=.git/hooks/fsmonitor-watchman) 0.84(0.21+0.63) 0.14(0.11+0.03) -83.3%
7519.6: diff -- 0_files (fsmonitor=.git/hooks/fsmonitor-watchman) 0.12(0.07+0.05) 0.13(0.09+0.04) +8.3%
7519.7: diff -- 10_files (fsmonitor=.git/hooks/fsmonitor-watchman) 0.12(0.09+0.04) 0.13(0.07+0.06) +8.3%
7519.8: diff -- 100_files (fsmonitor=.git/hooks/fsmonitor-watchman) 0.12(0.08+0.05) 0.12(0.08+0.05) +0.0%
7519.9: diff -- 1000_files (fsmonitor=.git/hooks/fsmonitor-watchman) 0.12(0.08+0.05) 0.13(0.09+0.04) +8.3%
7519.10: diff -- 10000_files (fsmonitor=.git/hooks/fsmonitor-watchman) 0.14(0.08+0.06) 0.13(0.07+0.06) -7.1%
7519.11: add (fsmonitor=.git/hooks/fsmonitor-watchman) 2.75(1.41+1.27) 2.03(1.26+0.70) -26.2%
7519.13: status (fsmonitor=) 1.38(1.03+1.04) 1.37(1.04+1.04) -0.7%
7519.14: status -uno (fsmonitor=) 1.11(0.83+0.98) 1.10(0.89+0.90) -0.9%
7519.15: status -uall (fsmonitor=) 2.30(1.57+1.42) 2.31(1.49+1.50) +0.4%
7519.16: diff (fsmonitor=) 1.43(1.13+1.76) 1.46(1.19+1.72) +2.1%
7519.17: diff -- 0_files (fsmonitor=) 0.10(0.08+0.04) 0.11(0.08+0.04) +10.0%
7519.18: diff -- 10_files (fsmonitor=) 0.10(0.07+0.05) 0.11(0.08+0.04) +10.0%
7519.19: diff -- 100_files (fsmonitor=) 0.10(0.07+0.04) 0.11(0.07+0.05) +10.0%
7519.20: diff -- 1000_files (fsmonitor=) 0.10(0.08+0.03) 0.11(0.08+0.04) +10.0%
7519.21: diff -- 10000_files (fsmonitor=) 0.11(0.08+0.05) 0.12(0.07+0.06) +9.1%
7519.22: add (fsmonitor=) 2.26(1.46+1.49) 2.27(1.42+1.55) +0.4%
Signed-off-by: Nipunn Koorapati <nipunn@dropbox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Much of the benchmark code is redundant. This is
easier to understand and edit.
Signed-off-by: Nipunn Koorapati <nipunn@dropbox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Results for the git-diff fsmonitor optimization
in patch in the parent-rev (using a 400k file repo to test)
As you can see here - git diff with fsmonitor running is
significantly better with this patch series (80% faster on my
workload)!
GIT_PERF_LARGE_REPO=~/src/server ./run v2.29.0-rc1 . -- p7519-fsmonitor.sh
Test v2.29.0-rc1 this tree
-----------------------------------------------------------------------------------------------------------------
7519.2: status (fsmonitor=.git/hooks/fsmonitor-watchman) 1.46(0.82+0.64) 1.47(0.83+0.62) +0.7%
7519.3: status -uno (fsmonitor=.git/hooks/fsmonitor-watchman) 0.16(0.12+0.04) 0.17(0.12+0.05) +6.3%
7519.4: status -uall (fsmonitor=.git/hooks/fsmonitor-watchman) 1.36(0.73+0.62) 1.37(0.76+0.60) +0.7%
7519.5: diff (fsmonitor=.git/hooks/fsmonitor-watchman) 0.85(0.22+0.63) 0.14(0.10+0.05) -83.5%
7519.6: diff -- 0_files (fsmonitor=.git/hooks/fsmonitor-watchman) 0.12(0.08+0.05) 0.13(0.11+0.02) +8.3%
7519.7: diff -- 10_files (fsmonitor=.git/hooks/fsmonitor-watchman) 0.12(0.08+0.04) 0.13(0.09+0.04) +8.3%
7519.8: diff -- 100_files (fsmonitor=.git/hooks/fsmonitor-watchman) 0.12(0.07+0.05) 0.13(0.07+0.06) +8.3%
7519.9: diff -- 1000_files (fsmonitor=.git/hooks/fsmonitor-watchman) 0.12(0.09+0.04) 0.13(0.08+0.05) +8.3%
7519.10: diff -- 10000_files (fsmonitor=.git/hooks/fsmonitor-watchman) 0.14(0.09+0.05) 0.13(0.10+0.03) -7.1%
7519.12: status (fsmonitor=) 1.67(0.93+1.49) 1.67(0.99+1.42) +0.0%
7519.13: status -uno (fsmonitor=) 0.37(0.30+0.82) 0.37(0.33+0.79) +0.0%
7519.14: status -uall (fsmonitor=) 1.58(0.97+1.35) 1.57(0.86+1.45) -0.6%
7519.15: diff (fsmonitor=) 0.34(0.28+0.83) 0.34(0.27+0.83) +0.0%
7519.16: diff -- 0_files (fsmonitor=) 0.09(0.06+0.04) 0.09(0.08+0.02) +0.0%
7519.17: diff -- 10_files (fsmonitor=) 0.09(0.07+0.03) 0.09(0.06+0.05) +0.0%
7519.18: diff -- 100_files (fsmonitor=) 0.09(0.06+0.04) 0.09(0.06+0.04) +0.0%
7519.19: diff -- 1000_files (fsmonitor=) 0.09(0.06+0.04) 0.09(0.05+0.05) +0.0%
7519.20: diff -- 10000_files (fsmonitor=) 0.10(0.08+0.04) 0.10(0.06+0.05) +0.0%
I also added a benchmark for a tiny git diff workload w/ a pathspec.
I see an approximately .02 second overhead added w/ and w/o fsmonitor
From looking at these results, I suspected that refresh_fsmonitor
is already happening during git diff - independent of this patch
series' optimization. Confirmed that suspicion by breaking on
refresh_fsmonitor.
(gdb) bt [simplified]
0 refresh_fsmonitor at fsmonitor.c:176
1 ie_match_stat at read-cache.c:375
2 match_stat_with_submodule at diff-lib.c:237
4 builtin_diff_files at builtin/diff.c:260
5 cmd_diff at builtin/diff.c:541
6 run_builtin at git.c:450
7 handle_builtin at git.c:700
8 run_argv at git.c:767
9 cmd_main at git.c:898
10 main at common-main.c:52
Signed-off-by: Nipunn Koorapati <nipunn@dropbox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The first git status would be inflated due to warming of
filesystem cache. This makes the results comparable.
Before
Test this tree
--------------------------------------------------------------------------------
7519.2: status (fsmonitor=.git/hooks/fsmonitor-watchman) 2.52(1.59+1.56)
7519.3: status -uno (fsmonitor=.git/hooks/fsmonitor-watchman) 0.18(0.12+0.06)
7519.4: status -uall (fsmonitor=.git/hooks/fsmonitor-watchman) 1.36(0.73+0.62)
7519.7: status (fsmonitor=) 0.69(0.52+0.90)
7519.8: status -uno (fsmonitor=) 0.37(0.28+0.81)
7519.9: status -uall (fsmonitor=) 1.53(0.93+1.32)
After
Test this tree
--------------------------------------------------------------------------------
7519.2: status (fsmonitor=.git/hooks/fsmonitor-watchman) 0.39(0.33+0.06)
7519.3: status -uno (fsmonitor=.git/hooks/fsmonitor-watchman) 0.17(0.13+0.05)
7519.4: status -uall (fsmonitor=.git/hooks/fsmonitor-watchman) 1.34(0.77+0.56)
7519.7: status (fsmonitor=) 0.70(0.53+0.90)
7519.8: status -uno (fsmonitor=) 0.37(0.32+0.78)
7519.9: status -uall (fsmonitor=) 1.55(1.01+1.25)
Signed-off-by: Nipunn Koorapati <nipunn@dropbox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The return code of command -v with a non-existing command is 1 in bash
and 127 in dash. Use that return code directly to allow the script to
work with dash and without watchman (e.g. on Debian).
While at it stop redirecting the output. stderr is redirected to
/dev/null by test_lazy_prereq already, and stdout can actually be
useful -- the path of the found watchman executable is sent there, but
it's shown only if the script was run with --verbose.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Acked-by: Ben Peart <benpeart@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add a test utility (test-drop-caches) that flushes all changes to disk
then drops file system cache on Windows, Linux, and OSX.
Add a perf test (p7519-fsmonitor.sh) for fsmonitor.
By default, the performance test will utilize the Watchman file system
monitor if it is installed. If Watchman is not installed, it will use a
dummy integration script that does not report any new or modified files.
The dummy script has very little overhead which provides optimistic results.
The performance test will also use the untracked cache feature if it is
available as fsmonitor uses it to speed up scanning for untracked files.
There are 4 environment variables that can be used to alter the default
behavior of the performance test:
GIT_PERF_7519_UNTRACKED_CACHE: used to configure core.untrackedCache
GIT_PERF_7519_SPLIT_INDEX: used to configure core.splitIndex
GIT_PERF_7519_FSMONITOR: used to configure core.fsmonitor
GIT_PERF_7519_DROP_CACHE: if set, the OS caches are dropped between tests
The big win for using fsmonitor is the elimination of the need to scan the
working directory looking for changed and untracked files. If the file
information is all cached in RAM, the benefits are reduced.
Signed-off-by: Ben Peart <benpeart@microsoft.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
Eric Sunshine
Nipunn Koorapati
Junio C Hamano
Jeff Hostetler
Taylor Blau
Nguyễn Thái Ngọc Duy
René Scharfe
Ben Peart