| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Add two new tests to measure repack performance. Both tests split the
repository into synthetic "pushes", and then leave the remaining objects
in a big base pack.
The first new test marks an empty pack as "kept" and then passes
--honor-pack-keep to avoid including objects in it. That doesn't change
the resulting pack, but it does let us compare to the normal repack case
to see how much overhead we add to check whether objects are kept or
not.
The other test is of --stdin-packs, which gives us a sense of how that
number scales based on the number of packs we provide as input. In each
of those tests, the empty pack isn't considered, but the residual pack
(objects that were left over and not included in one of the synthetic
push packs) is marked as kept.
(Note that in the single-pack case of the --stdin-packs test, there is
nothing do since there are no non-excluded packs).
Here are some timings on a recent clone of the kernel:
5303.5: repack (1) 57.26(54.59+10.84)
5303.6: repack with kept (1) 57.33(54.80+10.51)
in the 50-pack case, things start to slow down:
5303.11: repack (50) 71.54(88.57+4.84)
5303.12: repack with kept (50) 85.12(102.05+4.94)
and by the time we hit 1,000 packs, things are substantially worse, even
though the resulting pack produced is the same:
5303.17: repack (1000) 216.87(490.79+14.57)
5303.18: repack with kept (1000) 665.63(938.87+15.76)
That's because the code paths around handling .keep files are known to
scale badly; they look in every single pack file to find each object.
Our solution to that was to notice that most repos don't have keep
files, and to make that case a fast path. But as soon as you add a
single .keep, that part of pack-objects slows down again (even if we
have fewer objects total to look at).
Likewise, the scaling is pretty extreme on --stdin-packs (but each
subsequent test is also being asked to do more work):
5303.7: repack with --stdin-packs (1) 0.01(0.01+0.00)
5303.13: repack with --stdin-packs (50) 3.53(12.07+0.24)
5303.19: repack with --stdin-packs (1000) 195.83(371.82+8.10)
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
These are in a helper function, so the usual chain-lint doesn't notice
them. This function is still not perfect, as it has some git invocations
on the left-hand-side of the pipe, but it's primary purpose is timing,
not finding bugs or correctness issues.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Using "1~5" isn't portable. Nobody seems to have noticed, since perhaps
people don't tend to run the perf suite on more exotic platforms. Still,
it's better to set a good example.
We can use:
perl -ne 'print if $. % 5 == 1'
instead. But we can further observe that perl does a good job of the
other parts of this pipeline, and fold the whole thing together.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The approximate_object_count() function tries to compute the count only
once per process. But ever since it was introduced in 8e3f52d778
(find_unique_abbrev: move logic out of get_short_sha1(), 2016-10-03), we
failed to actually set the "valid" flag, meaning we'd compute it fresh
on every call.
This turns out not to be _too_ bad, because we're only iterating through
the packed_git list, and not making any system calls. But since it may
get called for every abbreviated hash we output, even this can add up if
you have many packs.
Here are before-and-after timings for a new perf test which just asks
rev-list to abbreviate each commit hash (the test repo is linux.git,
with commit-graphs):
Test origin HEAD
----------------------------------------------------------------------------
5303.3: rev-list (1) 28.91(28.46+0.44) 29.03(28.65+0.38) +0.4%
5303.4: abbrev-commit (1) 1.18(1.06+0.11) 1.17(1.02+0.14) -0.8%
5303.7: rev-list (50) 28.95(28.56+0.38) 29.50(29.17+0.32) +1.9%
5303.8: abbrev-commit (50) 3.67(3.56+0.10) 3.57(3.42+0.15) -2.7%
5303.11: rev-list (1000) 30.34(29.89+0.43) 30.82(30.35+0.46) +1.6%
5303.12: abbrev-commit (1000) 86.82(86.52+0.29) 77.82(77.59+0.22) -10.4%
5303.15: load 10,000 packs 0.08(0.02+0.05) 0.08(0.02+0.06) +0.0%
It doesn't help at all when we have 1 pack (5303.4), but we get a 10%
speedup when there are 1000 packs (5303.12). That's a modest speedup for
a case that's already slow and we'd hope to avoid in general (note how
slow it is even after, because we have to look in each of those packs
for abbreviations). But it's a one-line change that clearly matches the
original intent, so it seems worth doing.
The included perf test may also be useful for keeping an eye on any
regressions in the overall abbreviation code.
Reported-by: Rasmus Villemoes <rv@rasmusvillemoes.dk>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In a repository with many packfiles, the cost of the procedure that
avoids registering the same packfile twice was unnecessarily high
by using an inefficient search algorithm, which has been corrected.
* cs/store-packfiles-in-hashmap:
packfile.c: speed up loading lots of packfiles
|
|
When loading packfiles on start-up, we traverse the internal packfile
list once per file to avoid reloading packfiles that have already
been loaded. This check runs in quadratic time, so for poorly
maintained repos with a large number of packfiles, it can be pretty
slow.
Add a hashmap containing the packfile names as we load them so that
the average runtime cost of checking for already-loaded packs becomes
constant.
Add a perf test to p5303 to show speed-up.
The existing p5303 test runtimes are dominated by other factors and do
not show an appreciable speed-up. The new test in p5303 clearly exposes
a speed-up in bad cases. In this test we create 10,000 packfiles and
measure the start-up time of git rev-parse, which does little else
besides load in the packs.
Here are the numbers for the new p5303 test:
Test HEAD^ HEAD
---------------------------------------------------------------------
5303.12: load 10,000 packs 1.03(0.92+0.10) 0.12(0.02+0.09) -88.3%
Signed-off-by: Colin Stolley <cstolley@runbox.com>
Helped-by: Jeff King <peff@peff.net>
[jc: squashed the change to call hashmap in install_packed_git() by peff]
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This patch fixes an extreme slowdown in pack-objects when you have more
than 1023 packs. See below for numbers.
Since 43fa44fa3b (pack-objects: move in_pack out of struct object_entry,
2018-04-14), we use a complicated system to save some per-object memory.
Each object_entry structs gets a 10-bit field to store the index of the
pack it's in. We map those indices into pointers using
packing_data->in_pack_by_idx, which we initialize at the start of the
program. If we have 2^10 or more packs, then we instead create an array
of pack pointers, one per object. This is packing_data->in_pack.
So far so good. But there's one other tricky case: if a new pack arrives
after we've initialized in_pack_by_idx, it won't have an index yet. We
solve that by calling oe_map_new_pack(), which just switches on the fly
to the less-optimal in_pack mechanism, allocating the array and
back-filling it for already-seen objects.
But that logic kicks in even when we've switched to it already (whether
because we really did see a new pack, or because we had too many packs
in the first place). The result doesn't produce a wrong outcome, but
it's very slow. What happens is this:
- imagine you have a repo with 500k objects and 2000 packs that you
want to repack.
- before looking at any objects, we call prepare_in_pack_by_idx(). It
starts allocating an index for each pack. On the 1024th pack, it
sees there are too many, so it bails, leaving in_pack_by_idx as
NULL.
- while actually adding objects to the packing list, we call
oe_set_in_pack(), which checks whether the pack already has an
index. If it's one of the packs after the first 1023, then it
doesn't have one, and we'll call oe_map_new_pack().
But there's no useful work for that function to do. We're already
using in_pack, so it just uselessly walks over the complete list of
objects, trying to backfill in_pack.
And we end up doing this for almost 1000 packs (each of which may be
triggered by more than one object). And each time it triggers, we
may iterate over up to 500k objects. So in the absolute worst case,
this is quadratic in the number of objects.
The solution is simple: we don't need to bother checking whether the
pack has an index if we've already converted to using in_pack, since by
definition we're not going to use it. So we can just push the "does the
pack have a valid index" check down into that half of the conditional,
where we know we're going to use it.
The current test in p5303 sadly doesn't notice this problem, since it
maxes out at 1000 packs. If we add a new test to it at 2000 packs, it
does show the improvement:
Test HEAD^ HEAD
----------------------------------------------------------------------
5303.12: repack (2000) 26.72(39.68+0.67) 15.70(28.70+0.66) -41.2%
However, these many-pack test cases are rather expensive to run, so
adding larger and larger numbers isn't appealing. Instead, we can show
it off more easily by using GIT_TEST_FULL_IN_PACK_ARRAY, which forces us
into the absolute worst case: no pack has an index, so we'll trigger
oe_map_new_pack() pointlessly for every single object, making it truly
quadratic.
Here are the numbers (on git.git) with the included change to p5303:
Test HEAD^ HEAD
----------------------------------------------------------------------
5303.3: rev-list (1) 2.05(1.98+0.06) 2.06(1.99+0.06) +0.5%
5303.4: repack (1) 33.45(33.46+0.19) 2.75(2.73+0.22) -91.8%
5303.6: rev-list (50) 2.07(2.01+0.06) 2.06(2.01+0.05) -0.5%
5303.7: repack (50) 34.21(35.18+0.16) 3.49(4.50+0.12) -89.8%
5303.9: rev-list (1000) 2.87(2.78+0.08) 2.88(2.80+0.07) +0.3%
5303.10: repack (1000) 41.26(51.30+0.47) 10.75(20.75+0.44) -73.9%
Again, those improvements aren't realistic for the 1-pack case (because
in the real world, the full-array solution doesn't kick in), but it's
more useful to be testing the more-complicated code path.
While we're looking at this issue, we'll tweak one more thing: in
oe_map_new_pack(), we call REALLOC_ARRAY(pack->in_pack). But we'd never
expect to get here unless we're back-filling it for the first time, in
which case it would be NULL. So let's switch that to ALLOC_ARRAY() for
clarity, and add a BUG() to document the expectation. Unfortunately this
code isn't well-covered in the test suite because it's inherently racy
(it only kicks in if somebody else adds a new pack while we're in the
middle of repacking).
Signed-off-by: Jeff King <peff@peff.net>
Reviewed-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Git's pack storage does efficient (log n) lookups in a
single packfile's index, but if we have multiple packfiles,
we have to linearly search each for a given object. This
patch introduces some timing tests for cases where we have a
large number of packs, so that we can measure any
improvements we make in the following patches.
The main thing we want to time is object lookup. To do this,
we measure "git rev-list --objects --all", which does a
fairly large number of object lookups (essentially one per
object in the repository).
However, we also measure the time to do a full repack, which
is interesting for two reasons. One is that in addition to
the usual pack lookup, it has its own linear iteration over
the list of packs. And two is that because it it is the tool
one uses to go from an inefficient many-pack situation back
to a single pack, we care about its performance not only at
marginal numbers of packs, but at the extreme cases (e.g.,
if you somehow end up with 5,000 packs, it is the only way
to get back to 1 pack, so we need to make sure it performs
well).
We measure the performance of each command in three
scenarios: 1 pack, 50 packs, and 1,000 packs.
The 1-pack case is a baseline; any optimizations we do to
handle multiple packs cannot possibly perform better than
this.
The 50-pack case is as far as Git should generally allow
your repository to go, if you have auto-gc enabled with the
default settings. So this represents the maximum performance
improvement we would expect under normal circumstances.
The 1,000-pack case is hopefully rare, though I have seen it
in the wild where automatic maintenance was broken for some
time (and the repository continued to receive pushes). This
represents cases where we care less about general
performance, but want to make sure that a full repack
command does not take excessively long.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
Jeff King
Junio C Hamano
Colin Stolley