summaryrefslogtreecommitdiff
path: root/t/lib-rebase.sh
AgeCommit message (Collapse)AuthorFilesLines
2021-01-21tests: remove support for GIT_TEST_GETTEXT_POISONLibravatar Ævar Arnfjörð Bjarmason1-1/+0
This removes the ability to inject "poison" gettext() messages via the GIT_TEST_GETTEXT_POISON special test setup. I initially added this as a compile-time option in bb946bba761 (i18n: add GETTEXT_POISON to simulate unfriendly translator, 2011-02-22), and most recently modified to be toggleable at runtime in 6cdccfce1e0 (i18n: make GETTEXT_POISON a runtime option, 2018-11-08).. The reason for its removal is that the trade-off of maintaining it v.s. what it's getting us has long since flipped. When gettext was integrated in 5e9637c6297 (i18n: add infrastructure for translating Git with gettext, 2011-11-18) there was understandable concern on the Git ML that in marking messages for translation en-masse we'd inadvertently mark plumbing messages. The GETTEXT_POISON facility was a way to smoke those out via our test suite. Nowadays however we're done (or almost entirely done) with any marking of messages for translation. New messages are usually marked by their authors, who'll know whether it makes sense to translate them or not. If not any errors in marking the messages are much more likely to be spotted in review than in the the initial deluge of i18n patches in the 2011-2012 era. So let's just remove this. This leaves the test suite in a state where we still have a lot of test_i18n, C_LOCALE_OUTPUT etc. uses. Subsequent commits will remove those too. The change to t/lib-rebase.sh is a selective revert of the relevant part of f2d17068fd (i18n: rebase-interactive: mark comments of squash for translation, 2016-06-17), and the comment in t/t3406-rebase-message.sh is from c7108bf9ed (i18n: rebase: mark messages for translation, 2012-07-25). Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-11-10Merge branch 'pw/post-commit-from-sequencer'Libravatar Junio C Hamano1-0/+28
"rebase -i" ceased to run post-commit hook by mistake in an earlier update, which has been corrected. * pw/post-commit-from-sequencer: sequencer: run post-commit hook move run_commit_hook() to libgit and use it there sequencer.h fix placement of #endif t3404: remove uneeded calls to set_fake_editor t3404: set $EDITOR in subshell t3404: remove unnecessary subshell
2019-10-16t3404: remove uneeded calls to set_fake_editorLibravatar Phillip Wood1-0/+28
Some tests were calling set_fake_editor to ensure they had a sane no-op editor set. Now that all the editor setting is done in subshells these tests can rely on EDITOR=: and so do not need to call set_fake_editor. Also add a test at the end to detect any future additions messing with the exported value of $EDITOR. Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-07-31t/lib-rebase: prepare for testing `git rebase --rebase-merges`Libravatar Johannes Schindelin1-4/+5
The format of the todo list is quite a bit different in the `--rebase-merges` mode; Let's prepare the fake editor to handle those todo lists properly, too. The original idea was that we keep the original command unless overridden, and because the original todo lists only had `pick` lines anyway, we could be sloppy and "override" the command by the same command (i.e. use the sed replacement pattern "pick" instead of "&"). This actually would not have worked with `fixup` and `squash` commands, but it would appear that we never tried to use the fake editor with `--autosquash`. However, in the next commit we want to use the fake editor in conjunction with `--rebase-merges`, so let's use the correct sed replacement pattern. Technically, it is not necessary to take care of the `fakesha` thing (where we reuse the sed replacement pattern to craft a new todo command), at least for now, as the only user of that thing overrides the `action` anyway. Nevertheless, for completeness' sake, we do take care of it. Helped-by: brian m. carlson <sandals@crustytoothpaste.net> Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-11-06Merge branch 'sg/test-rebase-editor-fix'Libravatar Junio C Hamano1-2/+2
* sg/test-rebase-editor-fix: t3404-rebase-interactive: test abbreviated commands
2018-11-02Merge branch 'js/rebase-i-shortopt'Libravatar Junio C Hamano1-1/+1
"git rebase -i" learned to take 'b' as the short form of 'break' option in the todo list. * js/rebase-i-shortopt: rebase -i: recognize short commands without arguments
2018-11-02Merge branch 'js/rebase-i-break'Libravatar Junio C Hamano1-1/+1
"git rebase -i" learned a new insn, 'break', that the user can insert in the to-do list. Upon hitting it, the command returns control back to the user. * js/rebase-i-break: rebase -i: introduce the 'break' command rebase -i: clarify what happens on a failed `exec`
2018-10-29t3404-rebase-interactive: test abbreviated commandsLibravatar Johannes Sixt1-2/+2
Make sure that each short command is tested at least once. To not exacerbate the runtime of the test script, do not add new tests, but modify existing ones according to these criteria: - The test does not have a prerequisite. - The 'git rebase' command is not guarded by test_must_fail. The pick commands are optional in the FAKE_LINES variable, but when used, they do end up in the insn sheet. Test them, too. Signed-off-by: Johannes Sixt <j6t@kdbg.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-10-26rebase -i: recognize short commands without argumentsLibravatar Johannes Sixt1-1/+1
The sequencer instruction 'b', short for 'break', is rejected: error: invalid line 2: b The reason is that the parser expects all short commands to have an argument. Permit short commands without arguments. Signed-off-by: Johannes Sixt <j6t@kdbg.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-10-12rebase -i: introduce the 'break' commandLibravatar Johannes Schindelin1-1/+1
The 'edit' command can be used to cherry-pick a commit and then immediately drop out of the interactive rebase, with exit code 0, to let the user amend the commit, or test it, or look around. Sometimes this functionality would come in handy *without* cherry-picking a commit, e.g. to interrupt the interactive rebase even before cherry-picking a commit, or immediately after an 'exec' or a 'merge'. This commit introduces that functionality, as the spanking new 'break' command. Suggested-by: Stefan Beller <sbeller@google.com> Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-08-23t/lib-rebase.sh: support explicit 'pick' commands in 'fake_editor.sh'Libravatar SZEDER Gábor1-3/+3
The verbose output of the test 'reword without issues functions as intended' in 't3423-rebase-reword.sh', added in a9279c6785 (sequencer: do not squash 'reword' commits when we hit conflicts, 2018-06-19), contains the following error output: sed: -e expression #1, char 2: extra characters after command This error comes from within the 'fake-editor.sh' script created by 'lib-rebase.sh's set_fake_editor() function, and the root cause is the FAKE_LINES="pick 1 reword 2" variable in the test in question, in particular the "pick" word. 'fake-editor.sh' assumes 'pick' to be the default rebase command and doesn't support an explicit 'pick' command in FAKE_LINES. As a result, 'pick' will be used instead of a line number when assembling the following 'sed' script: sed -n picks/^pick/pick/p which triggers the aforementioned error. Luckily, this didn't affect the test's correctness: the erroring 'sed' command doesn't write anything to the todo script, and processing the rest of FAKE_LINES generates the desired todo script, as if that 'pick' command were not there at all. The minimal fix would be to remove the 'pick' word from FAKE_LINES, but that would leave us susceptible to similar issues in the future. Instead, teach the fake-editor script to recognize an explicit 'pick' command, which is still a fairly trivial change. In the future we might want to consider reinforcing this fake editor script with an &&-chain and stricter parsing of the FAKE_LINES variable (e.g. to error out when encountering unknown rebase commands or commands and line numbers in the wrong order). Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-06-17i18n: rebase-interactive: mark comments of squash for translationLibravatar Vasco Almeida1-0/+1
Mark comment messages of squash/fixup file ($squash_msg) for translation. Helper functions this_nth_commit_message and skip_nth_commit_message replace the previous method of making the comment messages (such as "This is the 2nd commit message:") aided by nth_string helper function. This step was taken as a workaround to enabled translation of entire sentences. However, doesn't change any text seen in English by the user, except for string "The first commit's message is:" which was changed to match the style of other instances. The test t3404-rebase-interactive.sh resorts to set_fake_editor which didn't account for GETTEXT_POISON. Fix it by assuming success when we find dummy gettext poison output where was supposed to find the first comment line "This is a combination of $count commits.". For that same message, use plural aware eval_ngettext instead of eval_gettext, since other languages have more complex plural forms. Signed-off-by: Vasco Almeida <vascomalmeida@sapo.pt> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-06-30git rebase -i: add static check for commands and SHA-1Libravatar Galan Rémi1-0/+5
Check before the start of the rebasing if the commands exists, and for the commands expecting a SHA-1, check if the SHA-1 is present and corresponds to a commit. In case of error, print the error, stop git rebase and prompt the user to fix with 'git rebase --edit-todo' or to abort. This allows to avoid doing half of a rebase before finding an error and giving back what's left of the todo list to the user and prompt him to fix when it might be too late for him to do so (he might have to abort and restart the rebase). Signed-off-by: Galan Rémi <remi.galan-alfonso@ensimag.grenoble-inp.fr> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-06-30git-rebase -i: add command "drop" to remove a commitLibravatar Galan Rémi1-2/+2
Instead of removing a line to remove the commit, you can use the command "drop" (just like "pick" or "edit"). It has the same effect as deleting the line (removing the commit) except that you keep a visual trace of your actions, allowing a better control and reducing the possibility of removing a commit by mistake. Signed-off-by: Galan Rémi <remi.galan-alfonso@ensimag.grenoble-inp.fr> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-11-26test: replace shebangs with descriptions in shell librariesLibravatar Jonathan Nieder1-1/+1
A #! line in these files is misleading, since these scriptlets are meant to be sourced with '.' (using whatever shell sources them) instead of run directly using the interpreter named on the #! line. Removing the #! line shouldn't hurt syntax highlighting since these files have filenames ending with '.sh'. For documentation, add a brief description of how the files are meant to be used in place of the shebang line. Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-07-01Merge branch 'maint'Libravatar Junio C Hamano1-0/+2
* maint: t7500: fix flipped actual/expect lib-rebase: document exec_ in FAKE_LINES
2013-07-01lib-rebase: style: use write_script, <<-\EOFLibravatar Andrew Pimlott1-38/+36
Signed-off-by: Andrew Pimlott <andrew@pimlott.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-07-01lib-rebase: document exec_ in FAKE_LINESLibravatar Andrew Pimlott1-0/+2
Signed-off-by: Andrew Pimlott <andrew@pimlott.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-06-27rebase -i: handle fixup! fixup! in --autosquashLibravatar Andrew Pimlott1-0/+14
In rebase -i --autosquash, ignore all "fixup! " or "squash! " after the first. This supports the case when a git commit --fixup/--squash referred to an earlier fixup/squash instead of the original commit (whether intentionally, as when the user expressly meant to note that the commit fixes an earlier fixup; or inadvertently, as when the user meant to refer to the original commit with :/msg; or out of laziness, as when the user could remember how to refer to the fixup but not the original). In the todo list, the full commit message is preserved, in case it provides useful cues to the user. A test helper set_cat_todo_editor is introduced to check this. Helped-by: Thomas Rast <trast@inf.ethz.ch> Helped-by: Junio C Hamano <gitster@pobox.com> Signed-off-by: Andrew Pimlott <andrew@pimlott.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-06-07add tests for rebasing with patch-equivalence presentLibravatar Martin von Zweigbergk1-0/+17
Signed-off-by: Martin von Zweigbergk <martinvonz@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-06-07add simple tests of consistency across rebase typesLibravatar Martin von Zweigbergk1-0/+16
Helped-by: Johannes Sixt <j6t@kdbg.org> Signed-off-by: Martin von Zweigbergk <martinvonz@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-08-11rebase -i: add exec command to launch a shell commandLibravatar Matthieu Moy1-0/+2
The typical usage pattern would be to run a test (or simply a compilation command) at given points in history. The shell command is ran (from the worktree root), and the rebase is stopped when the command fails, to give the user an opportunity to fix the problem before continuing with "git rebase --continue". This needs a little rework of skip_unnecessary_picks, which wasn't robust enough to deal with lines like exec >"file name with many spaces" in the todolist. The new version extracts command, sha1 and rest from each line, but outputs the line itself verbatim to avoid changing the whitespace layout. Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-01-22rebase -i: Enclose sed command substitution in quotesLibravatar Michael Haggerty1-1/+1
Reported by: Johannes Sixt <j.sixt@viscovery.net> Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-01-14t3404: Test the commit count in commit messages generated by "rebase -i"Libravatar Michael Haggerty1-1/+5
The first line of commit messages generated for "rebase -i" squash/fixup commits includes a count of the number of commits that are being combined. Add machinery to check that this count is correct, and add such a check to some test cases. Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-01-12lib-rebase: Allow comments and blank lines to be added to the rebase scriptLibravatar Michael Haggerty1-5/+16
(For testing "rebase -i"): Support new action types in $FAKE_LINES to allow comments and blank lines to be added to the "rebase -i" command list. Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-01-12lib-rebase: Provide clearer debugging info about what the editor didLibravatar Michael Haggerty1-2/+3
(For testing "rebase -i"): Output the "rebase -i" command script before and after the edits, to make it clearer what the editor did. Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-12-07Add a command "fixup" to rebase --interactiveLibravatar Michael Haggerty1-3/+4
The command is like "squash", except that it discards the commit message of the corresponding commit. Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu> Acked-by: Johannes Schindelin <Johannes.Schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-10-07Teach 'rebase -i' the command "reword"Libravatar Björn Gustavsson1-3/+3
Make it easier to edit just the commit message for a commit using 'git rebase -i' by introducing the "reword" command. Signed-off-by: Björn Gustavsson <bgustavsson@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-01-28lib-rebase.sh: Document what set_fake_editor() doesLibravatar Johannes Schindelin1-0/+12
Make it easy for other authors to use rebase tests' fake-editor. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-01-28t3404 & t3411: undo copy&pasteLibravatar Johannes Schindelin1-0/+36
Rather than copying and pasting, which is prone to lead to fixes missing in one version, move the fake-editor generator to t/t3404/. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>