summaryrefslogtreecommitdiff
path: root/t/lib-httpd.sh
AgeCommit message (Collapse)AuthorFilesLines
2018-08-02Merge branch 'sg/httpd-test-unflake'Libravatar Junio C Hamano1-0/+21
httpd tests saw occasional breakage due to the way its access log gets inspected by the tests, which has been updated to make them less flaky. * sg/httpd-test-unflake: t/lib-httpd: avoid occasional failures when checking access.log t/lib-httpd: add the strip_access_log() helper function t5541: clean up truncating access log
2018-07-12t/lib-httpd: avoid occasional failures when checking access.logLibravatar SZEDER Gábor1-0/+12
The last test of 't5561-http-backend.sh', 'server request log matches test results' may fail occasionally, because the order of entries in Apache's access log doesn't match the order of requests sent in the previous tests, although all the right requests are there. I saw it fail on Travis CI five times in the span of about half a year, when the order of two subsequent requests was flipped, and could trigger the failure with a modified Git. However, I was unable to trigger it with stock Git on my machine. Three tests in 't5541-http-push-smart.sh' and 't5551-http-fetch-smart.sh' check requests in the log the same way, so they might be prone to a similar occasional failure as well. When a test sends a HTTP request, it can continue execution after 'git-http-backend' fulfilled that request, but Apache writes the corresponding access log entry only after 'git-http-backend' exited. Some time inevitably passes between fulfilling the request and writing the log entry, and, under unfavourable circumstances, enough time might pass for the subsequent request to be sent and fulfilled by a different Apache thread or process, and then Apache writes access log entries racily. This effect can be exacerbated by adding a bit of variable delay after the request is fulfilled but before 'git-http-backend' exits, e.g. like this: diff --git a/http-backend.c b/http-backend.c index f3dc218b2..bbf4c125b 100644 --- a/http-backend.c +++ b/http-backend.c @@ -709,5 +709,7 @@ int cmd_main(int argc, const char **argv) max_request_buffer); cmd->imp(&hdr, cmd_arg); + if (getpid() % 2) + sleep(1); return 0; } This delay considerably increases the chances of log entries being written out of order, and in turn makes t5561's last test fail almost every time. Alas, it doesn't seem to be enough to trigger a similar failure in t5541 and t5551. So, since we can't just rely on the order of access log entries always corresponding the order of requests, make checking the access log more deterministic by sorting (simply lexicographically) both the stripped access log entries and the expected entries before the comparison with 'test_cmp'. This way the order of log entries won't matter and occasional out-of-order entries won't trigger a test failure, but the comparison will still notice any unexpected or missing log entries. OTOH, this sorting will make it harder to identify from which test an unexpected log entry came from or which test's request went missing. Therefore, in case of an error include the comparison of the unsorted log enries in the test output as well. And since all this should be performed in four tests in three test scripts, put this into a new helper function 'check_access_log' in 't/lib-httpd.sh'. Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-07-12t/lib-httpd: add the strip_access_log() helper functionLibravatar SZEDER Gábor1-0/+9
Four tests in three httpd-related test scripts check the contents of Apache's 'access.log', and they all do so by running 'sed' with the exact same script consisting of four s/// commands to strip uninteresting log fields and to vertically align the requested URLs. Extract this into a common helper function 'strip_access_log' in 'lib-httpd.sh', and use it in all of those tests. Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-06-28upload-pack: test negotiation with changing repositoryLibravatar Brandon Williams1-0/+1
Add tests to check the behavior of fetching from a repository which changes between rounds of negotiation (for example, when different servers in a load-balancing agreement participate in the same stateless RPC negotiation). This forms a baseline of comparison to the ref-in-want functionality (which will be introduced to the client in subsequent commits), and ensures that subsequent commits do not change existing behavior. As part of this effort, a mechanism to substitute strings in a single HTTP response is added. Signed-off-by: Brandon Williams <bmwill@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-08-08Merge branch 'ew/git-svn-http-tests'Libravatar Junio C Hamano1-3/+5
Tests for "git svn" have been taught to reuse the lib-httpd test infrastructure when testing the subversion integration that interacts with subversion repositories served over the http:// protocol. * ew/git-svn-http-tests: git svn: migrate tests to use lib-httpd t/t91*: do not say how to avoid the tests
2016-07-25git svn: migrate tests to use lib-httpdLibravatar Eric Wong1-3/+5
This allows us to use common test infrastructure and parallelize the tests. For now, GIT_SVN_TEST_HTTPD=true needs to be set to enable the SVN HTTP tests because we reuse the same test cases for both file:// and http:// SVN repositories. SVN_HTTPD_PORT is no longer honored. Tested under Apache 2.2 and 2.4 on Debian 7.x (wheezy) and 8.x (jessie), respectively. Cc: Clemens Buchacher <drizzd@aon.at> Cc: Michael J Gruber <git@drmicha.warpmail.net> Signed-off-by: Eric Wong <e@80x24.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-06-13lib-httpd.sh: print error.log on errorLibravatar Nguyễn Thái Ngọc Duy1-0/+1
Failure to bring up httpd for testing is not considered an error, so the trash directory, which contains this error.log file, is removed and we don't know what made httpd fail to start. Improve the situation a bit, print error.log but only in verbose mode. Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Reviewed-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-12-27t/lib-httpd.sh: use the $( ... ) construct for command substitutionLibravatar Elia Pinto1-2/+2
The Git CodingGuidelines prefer the $(...) construct for command substitution instead of using the backquotes `...`. The backquoted form is the traditional method for command substitution, and is supported by POSIX. However, all but the simplest uses become complicated quickly. In particular, embedded command substitutions and/or the use of double quotes require careful escaping with the backslash character. The patch was generated by: for _f in $(find . -name "*.sh") do perl -i -pe 'BEGIN{undef $/;} s/`(.+?)`/\$(\1)/smg' "${_f}" done and then carefully proof-read. Signed-off-by: Elia Pinto <gitter.spiros@gmail.com> Reviewed-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-05-22Merge branch 'jk/skip-http-tests-under-no-curl'Libravatar Junio C Hamano1-0/+12
Test clean-up. * jk/skip-http-tests-under-no-curl: tests: skip dav http-push tests under NO_EXPAT=NoThanks t/lib-httpd.sh: skip tests if NO_CURL is defined
2015-05-07tests: skip dav http-push tests under NO_EXPAT=NoThanksLibravatar Junio C Hamano1-0/+6
When built with NO_EXPAT=NoThanks, we will not have a working http-push over webdav. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-05-07t/lib-httpd.sh: skip tests if NO_CURL is definedLibravatar Jeff King1-0/+6
If we built git without curl, we can't actually test against an http server. In fact, all of the test scripts which include lib-httpd.sh already perform this check, with one exception: t5540. For those scripts, this is a noop, and for t5540, this is a bugfix (it used to fail when built with NO_CURL, though it could go unnoticed if you had a stale git-remote-https in your build directory). Noticed-by: Junio C Hamano <junio@pobox.com> Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-03-12t: pass GIT_TRACE through ApacheLibravatar Jeff King1-0/+1
Apache removes GIT_TRACE from the environment before running git-http-backend. This can make it hard to debug the server side of an http session. Let's let it through. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-01-16t/lib-httpd: switch SANITY check for NOT_ROOTLibravatar Jeff King1-1/+1
The SANITY prerequisite is really about whether the filesystem will respect the permissions we set, and being root is only one part of that. But the httpd tests really just care about not being root, as they are trying to avoid weirdness in apache (see a1a3011 for details). Let's switch out SANITY for a new NOT_ROOT prerequisite, which will let us tweak SANITY more freely. We implement NOT_ROOT by checking `id -u`, which is in POSIX and seems to be available even on MSYS. Note that we cannot just call this "ROOT" and ask for "!ROOT". The possible outcomes are: 1. we know we are root 2. we know we are not root 3. we could not tell, because `id` was not available We should conservatively treat (3) as "does not have the prerequisite", which means that a naive negation would not work. Helped-by: Kyle J. McKay <mackyle@gmail.com> Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-06-25Merge branch 'ep/avoid-test-a-o'Libravatar Junio C Hamano1-1/+1
Update tests and scripts to avoid "test ... -a ...", which is often more error-prone than "test ... && test ...". Squashed misconversion fix-up into git-submodule.sh updates. * ep/avoid-test-a-o: git-submodule.sh: avoid "echo" path-like values git-submodule.sh: avoid "test <cond> -a/-o <cond>" t/test-lib-functions.sh: avoid "test <cond> -a/-o <cond>" t/t9814-git-p4-rename.sh: avoid "test <cond> -a/-o <cond>" t/t5538-push-shallow.sh: avoid "test <cond> -a/-o <cond>" t/t5403-post-checkout-hook.sh: avoid "test <cond> -a/-o <cond>" t/t5000-tar-tree.sh: avoid "test <cond> -a/-o <cond>" t/t4102-apply-rename.sh: avoid "test <cond> -a/-o <cond>" t/t0026-eol-config.sh: avoid "test <cond> -a/-o <cond>" t/t0025-crlf-auto.sh: avoid "test <cond> -a/-o <cond>" t/lib-httpd.sh: avoid "test <cond> -a/-o <cond>" git-rebase--interactive.sh: avoid "test <cond> -a/-o <cond>" git-mergetool.sh: avoid "test <cond> -a/-o <cond>" git-bisect.sh: avoid "test <cond> -a/-o <cond>" contrib/examples/git-resolve.sh: avoid "test <cond> -a/-o <cond>" contrib/examples/git-repack.sh: avoid "test <cond> -a/-o <cond>" contrib/examples/git-merge.sh: avoid "test <cond> -a/-o <cond>" contrib/examples/git-commit.sh: avoid "test <cond> -a/-o <cond>" contrib/examples/git-clone.sh: avoid "test <cond> -a/-o <cond>" check_bindir: avoid "test <cond> -a/-o <cond>"
2014-06-16Merge branch 'jk/http-errors'Libravatar Junio C Hamano1-1/+6
Propagate the error messages from the webserver better to the client coming over the HTTP transport. * jk/http-errors: http: default text charset to iso-8859-1 remote-curl: reencode http error messages strbuf: add strbuf_reencode helper http: optionally extract charset parameter from content-type http: extract type/subtype portion of content-type t5550: test display of remote http error messages t/lib-httpd: use write_script to copy CGI scripts test-lib: preserve GIT_CURL_VERBOSE from the environment
2014-06-16Merge branch 'jk/do-not-run-httpd-tests-as-root'Libravatar Junio C Hamano1-0/+5
* jk/do-not-run-httpd-tests-as-root: t/lib-httpd: require SANITY prereq
2014-06-09t/lib-httpd.sh: avoid "test <cond> -a/-o <cond>"Libravatar Elia Pinto1-1/+1
The construct is error-prone; "test" being built-in in most modern shells, the reason to avoid "test <cond> && test <cond>" spawning one extra process by using a single "test <cond> -a <cond>" no longer exists. Signed-off-by: Elia Pinto <gitter.spiros@gmail.com> Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-05-23t5550: test display of remote http error messagesLibravatar Jeff King1-0/+1
Since commit 426e70d (remote-curl: show server content on http errors, 2013-04-05), we relay any text/plain error messages from the remote server to the user. However, we never tested it. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-05-23t/lib-httpd: use write_script to copy CGI scriptsLibravatar Jeff King1-1/+5
Using write_script will set our shebang line appropriately with $SHELL_PATH. The script that is there now is quite simple and likely to succeed even with a non-POSIX /bin/sh, but it does not hurt to be defensive. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-05-12t/lib-httpd: require SANITY prereqLibravatar Jeff King1-0/+5
Our test httpd setup will not generally run as root, because Apache will want to setuid, and we do not set up the "User" config directive. On some systems, like current Debian unstable, Apache fails to start, and we skip the tests: $ sudo ./t5539-fetch-http-shallow.sh --debug 1..0 # SKIP web server setup failed $ cat trash*t5539*/httpd/error.log [...] (22)Invalid argument: AH00024: Couldn't set permissions on the rewrite-map mutex; check User and Group directives AH00016: Configuration Failed However, on other systems (reportedly Ubuntu 11.04), Apache seems to start, and then bails during our tests with: getpwuid: couldn't determine user name from uid 4294967295, you probably need to modify the User directive Child 12037 returned a Fatal error... Apache is exiting! This may be related to the pre-fork/threading model in use (note that the second one complains of the child dying). However, it's not even worth investigating; in either case we just want to skip the tests, and we already recommend against running the test suite as root. Let's just explicitly check this condition and skip the tests rather than expecting Apache to do the right thing. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-03-05Merge branch 'jk/run-network-tests-by-default'Libravatar Junio C Hamano1-11/+11
Teach "make test" to run networking tests when possible by default. * jk/run-network-tests-by-default: tests: turn on network daemon tests by default
2014-02-14tests: turn on network daemon tests by defaultLibravatar Jeff King1-11/+11
We do not run the httpd nor git-daemon tests by default, as they are rather heavyweight and require network access (albeit over localhost). However, it would be nice if more pepole ran them, for two reasons: 1. We would get more test coverage on more systems. 2. The point of the test suite is to find regressions. It is very easy to change some of the underlying code and break the httpd code without realizing you are even affecting it. Running the httpd tests helps find these problems sooner (ideally before the patches even hit the list). We still want to leave an "out", though, for people who really do not want to run them. For that reason, the GIT_TEST_HTTPD and GIT_TEST_GIT_DAEMON variables are now tri-state booleans (true/false/auto), so you can say GIT_TEST_HTTPD=false to turn the tests back off. To support those who want a stable single way to disable these tests across versions of Git before and after this change, an empty string explicitly set to these variables is also taken as "false", so the behaviour changes only for those who: a. did not express any preference by leaving these variables unset. They did not test these features before, but now they do; or b. did express that they want to test these features by setting GIT_TEST_FEATURE=false (or any equivalent other ways to tell "false" to Git, e.g. "0"), which has been a valid but funny way to say that they do want to test the feature only because we used to interpret any non-empty string to mean "yes please test". They no longer test that feature. In addition, we are forgiving of common setup failures (e.g., you do not have apache installed, or have an old version) when the tri-state is "auto" (or unset), but report an error when it is "true". This makes "auto" a sane default, as we should not cause failures on setups where the tests cannot run. But it allows people who use "true" to catch regressions in their system (e.g., they uninstalled apache, but were expecting their automated test runs to test git-httpd, and would want to be notified). Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-02-10tests: auto-set LIB_HTTPD_PORT from test nameLibravatar Jeff King1-1/+1
We set the default apache port for each of the httpd tests to the 4-digit test number of the test script. We want these to remain unique so that the tests do not conflict with each other when run in parallel. Instead of doing it manually in each test script, let's just set it from the test name at run time. This is simpler, and is one less thing to be updated when test scripts are renamed (e.g., when being re-rolled or when conflicting after being merged with another topic). Incidentally, this fixes a case where t5537 and t5538 used the same port number (5537), and could conflict with each other when run in parallel. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-01-10Merge branch 'jk/http-auth-tests-robustify'Libravatar Junio C Hamano1-3/+12
Using the same username and password during the tests would not catch a potential breakage of sending one when we should be sending the other. * jk/http-auth-tests-robustify: use distinct username/password for http auth tests
2014-01-02use distinct username/password for http auth testsLibravatar Jeff King1-3/+12
The httpd server we set up to test git's http client code knows about a single account, in which both the username and password are "user@host" (the unusual use of the "@" here is to verify that we handle the character correctly when URL escaped). This means that we may miss a certain class of errors in which the username and password are mixed up internally by git. We can make our tests more robust by having distinct values for the username and password. In addition to tweaking the server passwd file and the client URL, we must teach the "askpass" harness to accept multiple values. As a bonus, this makes the setup of some tests more obvious; when we are expecting git to ask only about the password, we can seed the username askpass response with a bogus value. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-11-26test: replace shebangs with descriptions in shell librariesLibravatar Jonathan Nieder1-1/+28
A #! line in these files is misleading, since these scriptlets are meant to be sourced with '.' (using whatever shell sources them) instead of run directly using the interpreter named on the #! line. Removing the #! line shouldn't hurt syntax highlighting since these files have filenames ending with '.sh'. For documentation, add a brief description of how the files are meant to be used in place of the shebang line. Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-10-30Merge branch 'jk/http-auth-redirects'Libravatar Junio C Hamano1-1/+2
Handle the case where http transport gets redirected during the authorization request better. * jk/http-auth-redirects: http.c: Spell the null pointer as NULL remote-curl: rewrite base url from info/refs redirects remote-curl: store url as a strbuf remote-curl: make refs_url a strbuf http: update base URLs when we see redirects http: provide effective url to callers http: hoist credential request out of handle_curl_result http: refactor options to http_get_* http_request: factor out curlinfo_strbuf http_get_file: style fixes
2013-10-14remote-curl: rewrite base url from info/refs redirectsLibravatar Jeff King1-1/+2
For efficiency and security reasons, an earlier commit in this series taught http_get_* to re-write the base url based on redirections we saw while making a specific request. This commit wires that option into the info/refs request, meaning that a redirect from http://example.com/foo.git/info/refs to https://example.com/bar.git/info/refs will behave as if "https://example.com/bar.git" had been provided to git in the first place. The tests bear some explanation. We introduce two new hierearchies into the httpd test config: 1. Requests to /smart-redir-limited will work only for the initial info/refs request, but not any subsequent requests. As a result, we can confirm whether the client is re-rooting its requests after the initial contact, since otherwise it will fail (it will ask for "repo.git/git-upload-pack", which is not redirected). 2. Requests to smart-redir-auth will redirect, and require auth after the redirection. Since we are using the redirected base for further requests, we also update the credential struct, in order not to mislead the user (or credential helpers) about which credential is needed. We can therefore check the GIT_ASKPASS prompts to make sure we are prompting for the new location. Because we have neither multiple servers nor https support in our test setup, we can only redirect between paths, meaning we need to turn on credential.useHttpPath to see the difference. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
2013-09-20t5541: mark passing c-a-s test as successLibravatar Jeff King1-1/+1
Commit 05c1eb1 (push: teach --force-with-lease to smart-http transport) fixed the compare-and-swap test in t5541. It tried to mark the test as passing by teaching the test helper function to expect an extra "success or failure" parameter, but forgot to actually use the parameter in the helper. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-08-02push: teach --force-with-lease to smart-http transportLibravatar Junio C Hamano1-1/+2
We have been passing enough information to enable the compare-and-swap logic down to the transport layer, but the transport helper was not passing it to smart-http transport. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-08-01t5540/5541: smart-http does not support "--force-with-lease"Libravatar Junio C Hamano1-0/+16
The push() method in remote-curl.c is not told and does not pass the necessary information to underlying send-pack, so this extension does not yet work. Leave a note in the test suite. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-02-04Verify Content-Type from smart HTTP serversLibravatar Shawn Pearce1-0/+1
Before parsing a suspected smart-HTTP response verify the returned Content-Type matches the standard. This protects a client from attempting to process a payload that smells like a smart-HTTP server response. JGit has been doing this check on all responses since the dawn of time. I mistakenly failed to include it in git-core when smart HTTP was introduced. At the time I didn't know how to get the Content-Type from libcurl. I punted, meant to circle back and fix this, and just plain forgot about it. Signed-off-by: Shawn Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-09-07Merge branch 'jk/maint-http-half-auth-push'Libravatar Junio C Hamano1-0/+39
Pushing to smart HTTP server with recent Git fails without having the username in the URL to force authentication, if the server is configured to allow GET anonymously, while requiring authentication for POST. * jk/maint-http-half-auth-push: http: prompt for credentials on failed POST http: factor out http error code handling t: test http access to "half-auth" repositories t: test basic smart-http authentication t/lib-httpd: recognize */smart/* repos as smart-http t/lib-httpd: only route auth/dumb to dumb repos t5550: factor out http auth setup t5550: put auth-required repo in auth/dumb
2012-08-27t5550: factor out http auth setupLibravatar Jeff King1-0/+39
The t5550 script sets up a nice askpass helper for simulating user input and checking what git prompted for. Let's make it available to other http scripts by migrating it to lib-httpd. We can use this immediately in t5540 to make our tests more robust (previously, we did not check at all that hitting the password-protected repo actually involved a password). Unfortunately, we end up failing the test because the current code erroneously prompts twice (once for git-remote-http, and then again when the former spawns git-http-push). More importantly, though, it will let us easily add smart-http authentication tests in t5541 and t5551; we currently do not test smart-http authentication at all. As part of making it generic, let's always look for and store auxiliary askpass files at the top-level trash directory; this makes it compatible with t5540, which runs some tests from sub-repositories. We can abstract away the ugliness with a short helper function. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-07-24t/lib-httpd: handle running under --valgrindLibravatar Jeff King1-0/+4
Running the http tests with valgrind does not work for two reasons: 1. Apache complains about following the symbolic link from git-http-backend to valgrind.sh. 2. Apache does not pass through the GIT_VALGRIND variable to the backend CGI. This patch fixes both problems. Unfortunately, there is a slight hack we need to handle passing environment variables through Apache. If we just tell it: PassEnv GIT_VALGRIND then Apache will complain when GIT_VALGRIND is not set. If we try: SetEnv GIT_VALGRIND ${GIT_VALGRIND} then when GIT_VALGRIND is not set, it will pass through the literal "${GIT_VALGRIND}". Instead, we now unconditionally pass through GIT_VALGRIND from lib-httpd.sh into apache, even if it is empty. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-04-12Fix httpd tests that broke when non-ff push advice changedLibravatar Christopher Tiwald1-1/+1
Signed-off-by: Christopher Tiwald <christiwald@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-07-20improve httpd auth testsLibravatar Jeff King1-4/+6
These just checked that we could clone a repository when the username and password were given in the URL; we should also check that git will prompt when no or partial credentials are given. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-04-13i18n: use test_i18ngrep in lib-httpd and t2019Libravatar Junio C Hamano1-3/+2
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-03-09i18n: git-push "prevent you from losing" messageLibravatar Ævar Arnfjörð Bjarmason1-1/+1
Gettextize the "To prevent you from losing history" message. A test in lib-httpd.sh and another in t5541-http-push.sh explicitly checked for this message. Change them to skip under GETTEXT_POISON=YesPlease. Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-11-17t5550: test HTTP authentication and userinfo decodingLibravatar Gabriel Corona1-0/+3
Add a test for HTTP authentication and proper percent-decoding of the userinfo (username and password) part of the URL. Signed-off-by: Gabriel Corona <gabriel.corona@enst-bretagne.fr> Acked-by: Tay Ray Chuan <rctay89@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-07-20t/{t5541,lib-httpd}: replace problematic '!()' notation with test_must_failLibravatar Brandon Casey1-1/+1
The '!()' notation is interpreted as a pattern-list on Ksh. The Ksh man page describe it as follows: !(pattern-list) Matches anything except one of the given patterns. Ksh performs a file glob using the pattern-list and then tries to execute the first file in the list. If a space is added between the '!' and the open parens, then Ksh will not interpret it as a pattern list, but in this case, it is preferred to use test_must_fail, so lets do so. Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-07-08tests: Use skip_all=* to skip testsLibravatar Ævar Arnfjörð Bjarmason1-4/+4
Change tests to skip with skip_all=* + test_done instead of using say + test_done. This is a follow-up to "tests: Skip tests in a way that makes sense under TAP" (fadb5156e4). I missed these cases when prepearing that patch, hopefully this is all of them. Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-06-25tests: Skip tests in a way that makes sense under TAPLibravatar Ævar Arnfjörð Bjarmason1-2/+1
SKIP messages are now part of the TAP plan. A TAP harness now knows why a particular test was skipped and can report that information. The non-TAP harness built into Git's test-lib did nothing special with these messages, and is unaffected by these changes. Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-03-02t554[01]-http-push: refactor, add non-ff testsLibravatar Tay Ray Chuan1-0/+29
Move non-fast forward tests to lib-httpd.sh so that we don't have to duplicate the tests in both t5540 and t5541. Signed-off-by: Tay Ray Chuan <rctay89@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-01-06t/lib-http.sh: Restructure finding of default httpd locationLibravatar Tarmigan Casebolt1-6/+24
On CentOS 5, httpd is located at /usr/sbin/httpd, and the modules are located at /usr/lib64/httpd/modules. To enable easy testing of httpd, we would like those locations to be detected automatically. uname might not be the best way to determine the default location for httpd since different Linux distributions apparently put httpd in different places, so we test a couple different locations for httpd, and use the first one that we come across. We do the same for the modules directory. cc: Jay Soffian <jaysoffian@gmail.com> Signed-off-by: Tarmigan Casebolt <tarmigan+git@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-06-01test-lib: fix http exit codesLibravatar Clemens Buchacher1-2/+4
Previously, die() would report the exit code of stop_httpd. Instead, save and reset the exit code before dying. Signed-off-by: Clemens Buchacher <drizzd@aon.at> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-04-05tests: remove exit after test_done callLibravatar Jeff King1-3/+0
test_done always exits, so this line is never executed. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-02-26test scripts: refactor start_httpd helperLibravatar Jeff King1-2/+7
There are some redirects and some error checking that need to be done by the caller; let's move both into the start_httpd function so that all callers don't have to repeat them (there is only one caller now, but another will follow in this series). This doesn't violate any assumptions that aren't already being made by lib-httpd, which is happy to say "skipping" and call test_done for a number of other cases. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Jay Soffian <jaysoffian@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-02-25Allow HTTP tests to run on DarwinLibravatar Jay Soffian1-5/+17
This patch allows the HTTP tests to run on OS X 10.5. It is not sufficient to be able to pass in LIB_HTTPD_PATH and LIB_HTTPD_MODULE_PATH alone, as the apache.conf also needs a couple tweaks. These changes are put into an <IfDefine> to keep them Darwin specific, but this means lib-httpd.sh needs to be modified to pass -DDarwin to apache when running on Darwin. As long as we're making this change to lib-httpd.sh, we may as well set LIB_HTTPD_PATH and LIB_HTTPD_MODULE_PATH to appropriate default values for the platform. Note that we now pass HTTPD_PARA to apache at shutdown as well. Otherwise apache will emit a harmless, but noisy warning that LogFormat is an unknown directive. Signed-off-by: Jay Soffian <jaysoffian@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-01-19use uppercase POSIX compliant signals for the 'trap' commandLibravatar Markus Heidelberg1-5/+5
In 'man 1p trap' there is written: "Implementations may permit names with the SIG prefix or ignore case in signal names as an extension." So change the lowercase signals to uppercase, which is POSIX compliant instead of being an extension. There wasn't anybody claiming that it doesn't work, but there was a bug with using a signal with the SIG prefix, which is an extension as well. So let's play it safe and change it, since it doesn't hurt anyone. While at it, also convert 8 indentation spaces to 1 tab character. Signed-off-by: Markus Heidelberg <markus.heidelberg@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>