| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
After 'start_git_daemon' starts 'git daemon' (note the space in the
middle) in the background, it saves the background process' PID, so
the daemon can be stopped at the end of the test script. However,
'git-daemon' is not a builtin but a dashed external command, which
means that the dashless 'git daemon' executes the dashed 'git-daemon'
command, and, consequently, the PID recorded is not the PID of the
"real" daemon process, but that of the main 'git' wrapper. Now, if a
test script involving 'git daemon' is interrupted by ctrl-C, then only
the main 'git' process is stopped, but the real daemon process tends
to survive somehow, and keeps on running in the background
indefinitely, keeping the daemon's port to itself, and thus preventing
subsequent runs of the same test script.
Work this around by running 'git daemon' with the '--pidfile=...'
option to save the PID of the real daemon process, and kill that
process in 'stop_git_daemon' as well.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Flaky tests can now be repeatedly run under load with the
"--stress" option.
* sg/stress-test:
test-lib: add the '--stress' option to run a test repeatedly under load
test-lib-functions: introduce the 'test_set_port' helper function
test-lib: set $TRASH_DIRECTORY earlier
test-lib: consolidate naming of test-results paths
test-lib: parse command line options earlier
test-lib: parse options in a for loop to keep $@ intact
test-lib: extract Bash version check for '-x' tracing
test-lib: translate SIGTERM and SIGHUP to an exit
|
|
Several test scripts run daemons like 'git-daemon' or Apache, and
communicate with them through TCP sockets. To have unique ports where
these daemons are accessible, the ports are usually the number of the
corresponding test scripts, unless the user overrides them via
environment variables, and thus all those tests and test libs contain
more or less the same bit of one-liner boilerplate code to find out
the port. The last patch in this series will make this a bit more
complicated.
Factor out finding the port for a daemon into the common helper
function 'test_set_port' to avoid repeating ourselves.
Take special care of test scripts with "low" numbers:
- Test numbers below 1024 would result in a port that's only usable
as root, so set their port to '10000 + test-nr' to make sure it
doesn't interfere with other tests in the test suite. This makes
the hardcoded port number in 't0410-partial-clone.sh' unnecessary,
remove it.
- The shell's arithmetic evaluation interprets numbers with leading
zeros as octal values, which means that test number below 1000 and
containing the digits 8 or 9 will trigger an error. Remove all
leading zeros from the test numbers to prevent this.
Note that the 'git p4' tests are unlike the other tests involving
daemons in that:
- 'lib-git-p4.sh' doesn't use the test's number for unique port as
is, but does a bit of additional arithmetic on top [1].
- The port is not overridable via an environment variable.
With this patch even 'git p4' tests will use the test's number as
default port, and it will be overridable via the P4DPORT environment
variable.
[1] Commit fc00233071 (git-p4 tests: refactor and cleanup, 2011-08-22)
introduced that "unusual" unique port computation without
explaining why it was necessary (as opposed to simply using the
test number as is). It seems to be just unnecessary complication,
and in any case that commit came way before the "test nr as unique
port" got "standardized" for other daemons in commits c44132fcf3
(tests: auto-set git-daemon port, 2014-02-10), 3bb486e439 (tests:
auto-set LIB_HTTPD_PORT from test name, 2014-02-10), and
bf9d7df950 (t/lib-git-svn.sh: improve svnserve tests with parallel
make test, 2017-12-01).
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This reverts commit 314a73d658 (t/lib-git-daemon: record daemon log,
2018-01-25), which let tests use the output of git-daemon.
The previous commit removed the last user of deamon.log in the tests,
there's no good way to make checking for output in the log
race-proof. Revert this commit as well, to make sure others are not
tempted to use daemon.log in tests in the future, which would lead to
racy tests.
The original commit had one change that still makes sense, namely
switching read/echo for "read -r" and "printf", which relays the data
more faithfully. Don't revert that piece here, as it is still a
useful change.
Suggested-by: Jeff King <peff@peff.net>
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Test scripts checking 'git daemon' stop the daemon with a TERM signal,
and the 'stop_git_daemon' helper checks the daemon's exit status to
make sure that it indeed died because of that signal.
This check is bogus since 03c39b3458 (t/lib-git-daemon: use
test_match_signal, 2016-06-24), for two reasons:
- Right after killing 'git daemon', 'stop_git_daemon' saves its exit
status in a variable, but since 03c39b3458 the condition checking
the exit status looks at '$?', which at this point is not the exit
status of 'git daemon', but that of the variable assignment, i.e.
it's always 0.
- The unexpected exit status should abort the whole test script with
'error', but it doesn't, because 03c39b3458 forgot to negate
'test_match_signal's exit status in the condition.
This patch fixes both issues.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
All of our git-protocol tests rely on invoking the client
and having it make a request of a server. That gives a nice
real-world test of how the two behave together, but it
doesn't leave any room for testing how a server might react
to _other_ clients.
Let's add a few test helper functions which can be used to
manually conduct a git-protocol conversation with a remote
git-daemon:
1. To connect to a remote git-daemon, we need something
like "netcat". But not everybody will have netcat. And
even if they do, the behavior with respect to
half-duplex shutdowns is not portable (openbsd netcat
has "-N", with others you must rely on "-q 1", which is
racy).
Here we provide a "fake_nc" that is capable of doing
a client-side netcat, with sane half-duplex semantics.
It relies on perl's IO::Socket::INET. That's been in
the base distribution since 5.6.0, so it's probably
available everywhere. But just to be on the safe side,
we'll add a prereq.
2. To help tests speak and read pktline, this patch adds
packetize() and depacketize() functions.
I've put fake_nc() into lib-git-daemon.sh, since that's
really the only server where we'd need to use a network
socket. Whereas the pktline helpers may be of more general
use, so I've added them to test-lib-functions.sh. Programs
like upload-pack speak pktline, but can talk directly over
stdio without a network socket.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When we start git-daemon for our tests, we send its stderr
log stream to a named pipe. We synchronously read the first
line to make sure that the daemon started, and then dump the
rest to descriptor 4. This is handy for debugging test
output with "--verbose", but the tests themselves can't
access the log data.
Let's dump the log into a file, as well, so that future
tests can check the log. There are a few subtleties worth
calling out here:
- we'll continue to send output to descriptor 4 for
viewing/debugging, which would imply swapping out "cat"
for "tee". But we want to ensure that there's no
buffering, and "tee" doesn't have a standard way to
ask for that. So we'll use a shell loop around "read"
and "printf" instead. That ensures that after a request
has been served, the matching log entries will have made
it to the file.
- the existing first-line shell loop used read/echo. We'll
switch to consistently using "read -r" and "printf" to
relay data as faithfully as possible.
- we open the logfile for append, rather than just output.
That makes it OK for tests to truncate the logfile
without restarting the daemon (the OS will atomically
seek to the end of the file when outputting each line).
That allows tests to look at the log without worrying
about pollution from earlier tests.
Helped-by: Lucas Werkmeister <mail@lucaswerkmeister.de>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This test just checks that old clients can clone and fetch
from a newer git-daemon. The opposite should also be true,
but it's hard to test ancient versions of git-daemon because
they lack basic options like "--listen".
Note that we have to make a slight tweak to the
lib-git-daemon helper from the regular tests, so that it
starts the daemon with our correct git.a version.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When git-daemon exits, we expect it to be with the SIGTERM
we just sent it. If we see anything else, we'll complain.
But our check against exit code "143" is not portable. For
example:
$ ksh93 t5570-git-daemon.sh
[...]
error: git daemon exited with status: 271
We can fix this by using test_match_signal.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The Git daemon tests create a FIFO first thing and will hang if said
FIFO is not available.
This is a problem with Git for Windows, where `mkfifo` is an MSYS2
program that leverages MSYS2's POSIX emulation layer, but
`git-daemon.exe` is a MINGW program that has not the first clue about
that POSIX emulation layer and therefore blinks twice when it sees
MSYS2's emulated FIFOs and then just stares into space.
This lets t5570-git-daemon.sh and t5811-proto-disable-git.sh pass.
Signed-off-by: Stepan Kasal <kasal@ucw.cz>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Teach "make test" to run networking tests when possible by default.
* jk/run-network-tests-by-default:
tests: turn on network daemon tests by default
|
|
We do not run the httpd nor git-daemon tests by default, as
they are rather heavyweight and require network access
(albeit over localhost). However, it would be nice if more
pepole ran them, for two reasons:
1. We would get more test coverage on more systems.
2. The point of the test suite is to find regressions. It
is very easy to change some of the underlying code and
break the httpd code without realizing you are even
affecting it. Running the httpd tests helps find these
problems sooner (ideally before the patches even hit
the list).
We still want to leave an "out", though, for people who really do
not want to run them. For that reason, the GIT_TEST_HTTPD and
GIT_TEST_GIT_DAEMON variables are now tri-state booleans
(true/false/auto), so you can say GIT_TEST_HTTPD=false to turn the
tests back off. To support those who want a stable single way to
disable these tests across versions of Git before and after this
change, an empty string explicitly set to these variables is also
taken as "false", so the behaviour changes only for those who:
a. did not express any preference by leaving these variables
unset. They did not test these features before, but now they
do; or
b. did express that they want to test these features by setting
GIT_TEST_FEATURE=false (or any equivalent other ways to tell
"false" to Git, e.g. "0"), which has been a valid but funny way
to say that they do want to test the feature only because we
used to interpret any non-empty string to mean "yes please
test". They no longer test that feature.
In addition, we are forgiving of common setup failures (e.g., you do
not have apache installed, or have an old version) when the
tri-state is "auto" (or unset), but report an error when it is
"true". This makes "auto" a sane default, as we should not cause
failures on setups where the tests cannot run. But it allows people
who use "true" to catch regressions in their system (e.g., they
uninstalled apache, but were expecting their automated test runs to
test git-httpd, and would want to be notified).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A recent commit taught lib-httpd to always start apache on
the same port as the numbered tests. Let's do the same for
the git-daemon tests.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A #! line in these files is misleading, since these scriptlets are
meant to be sourced with '.' (using whatever shell sources them)
instead of run directly using the interpreter named on the #! line.
Removing the #! line shouldn't hurt syntax highlighting since
these files have filenames ending with '.sh'. For documentation,
add a brief description of how the files are meant to be used in
place of the shebang line.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The shell function that starts git-daemon wants to read the first line of
the daemon's stderr to ensure that it started correctly. Subsequent daemon
errors should be redirected to fd 4 (which is the terminal in verbose mode
or /dev/null in quiet mode). To that end the shell script used 'read' to
get the first line of output, and then 'cat &' to forward everything else
in a background process.
The problem is, that 'cat >&4 &' does not produce any output because the
shell redirects a background process's stdin to /dev/null. To have this
command invocation do anything useful, we have to redirect its stdin
explicitly (which overrides the /dev/null redirection).
The shell function connects the daemon's stderr to its consumers via a
FIFO. We cannot just do this:
read line <git_daemon_output
cat <git_daemon_output >&4 &
because after the first redirection the pipe is closed and the daemon
could receive SIGPIPE if it writes at the wrong moment. Therefore, we open
the readable end of the FIFO only once on fd 7 in the shell and dup from
there to the stdin of the two consumers.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In start_daemon, git-daemon is started as a background process. In
theory, the tests may try to connect before the daemon had a chance
to open a listening socket. Avoid this race condition by waiting
for it to output "Ready to rumble". Any other output is considered
an error and the test is aborted.
Should git-daemon produce no output at all, lib-git-daemon would
block forever. This could be fixed by introducing a timeout. On
the other hand, we have no timeout for other git commands which
could suffer from the same problem. Since such a mechanism adds
some complexity, I have decided against it.
Signed-off-by: Clemens Buchacher <drizzd@aon.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The semantics of the git daemon tests are similar to the http transport
tests. In fact, they are only a slightly modified copy of t5550, plus the
newly added remote error tests.
All git-daemon tests will be skipped unless the environment variable
GIT_TEST_GIT_DAEMON is set.
Signed-off-by: Clemens Buchacher <drizzd@aon.at>
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
SZEDER Gábor
Junio C Hamano
Thomas Gummerer
Jeff King
Johannes Schindelin
Jonathan Nieder
Johannes Sixt
Clemens Buchacher