| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The peel_ref() interface is confusing and error-prone:
- it's typically used by ref iteration callbacks that have both a
refname and oid. But since they pass only the refname, we may load
the ref value from the filesystem again. This is inefficient, but
also means we are open to a race if somebody simultaneously updates
the ref. E.g., this:
int some_ref_cb(const char *refname, const struct object_id *oid, ...)
{
if (!peel_ref(refname, &peeled))
printf("%s peels to %s",
oid_to_hex(oid), oid_to_hex(&peeled);
}
could print nonsense. It is correct to say "refname peels to..."
(you may see the "before" value or the "after" value, either of
which is consistent), but mentioning both oids may be mixing
before/after values.
Worse, whether this is possible depends on whether the optimization
to read from the current iterator value kicks in. So it is actually
not possible with:
for_each_ref(some_ref_cb);
but it _is_ possible with:
head_ref(some_ref_cb);
which does not use the iterator mechanism (though in practice, HEAD
should never peel to anything, so this may not be triggerable).
- it must take a fully-qualified refname for the read_ref_full() code
path to work. Yet we routinely pass it partial refnames from
callbacks to for_each_tag_ref(), etc. This happens to work when
iterating because there we do not call read_ref_full() at all, and
only use the passed refname to check if it is the same as the
iterator. But the requirements for the function parameters are quite
unclear.
Instead of taking a refname, let's instead take an oid. That fixes both
problems. It's a little funny for a "ref" function not to involve refs
at all. The key thing is that it's optimizing under the hood based on
having access to the ref iterator. So let's change the name to make it
clear why you'd want this function versus just peel_object().
There are two other directions I considered but rejected:
- we could pass the peel information into the each_ref_fn callback.
However, we don't know if the caller actually wants it or not. For
packed-refs, providing it is essentially free. But for loose refs,
we actually have to peel the object, which would be wasteful in most
cases. We could likewise pass in a flag to the callback indicating
whether the peeled information is known, but that complicates those
callbacks, as they then have to decide whether to manually peel
themselves. Plus it requires changing the interface of every
callback, whether they care about peeling or not, and there are many
of them.
- we could make a function to return the peeled value of the current
iterated ref (computing it if necessary), and BUG() otherwise. I.e.:
int peel_current_iterated_ref(struct object_id *out);
Each of the current callers is an each_ref_fn callback, so they'd
mostly be happy. But:
- we use those callbacks with functions like head_ref(), which do
not use the iteration code. So we'd need to handle the fallback
case there, anyway.
- it's possible that a caller would want to call into generic code
that sometimes is used during iteration and sometimes not. This
encapsulates the logic to do the fast thing when possible, and
fallback when necessary.
The implementation is mostly obvious, but I want to call out a few
things in the patch:
- the test-tool coverage for peel_ref() is now meaningless, as it all
collapses to a single peel_object() call (arguably they were pretty
uninteresting before; the tricky part of that function is the
fast-path we see during iteration, but these calls didn't trigger
that). I've just dropped it entirely, though note that some other
tests relied on the tags we created; I've moved that creation to the
tests where it matters.
- we no longer need to take a ref_store parameter, since we'd never
look up a ref now. We do still rely on a global "current iterator"
variable which _could_ be kept per-ref-store. But in practice this
is only useful if there are multiple recursive iterations, at which
point the more appropriate solution is probably a stack of
iterators. No caller used the actual ref-store parameter anyway
(they all call the wrapper that passes the_repository).
- the original only kicked in the optimization when the "refname"
pointer matched (i.e., not string comparison). We do likewise with
the "oid" parameter here, but fall back to doing an actual oideq()
call. This in theory lets us kick in the optimization more often,
though in practice no current caller cares. It should never be
wrong, though (peeling is a property of an object, so two refs
pointing to the same object would peel identically).
- the original took care not to touch the peeled out-parameter unless
we found something to put in it. But no caller cares about this, and
anyway, it is enforced by peel_object() itself (and even in the
optimized iterator case, that's where we eventually end up). We can
shorten the code and avoid an extra copy by just passing the
out-parameter through the stack.
Signed-off-by: Jeff King <peff@peff.net>
Reviewed-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The exchange between receive-pack and proc-receive hook did not
carefully check for errors.
* jx/t5411-flake-fix:
receive-pack: use default version 0 for proc-receive
receive-pack: gently write messages to proc-receive
t5411: new helper filter_out_user_friendly_and_stable_output
|
|
A specialization of hashmap that uses a string as key has been
introduced. Hopefully it will see wider use over time.
* en/strmap:
shortlog: use strset from strmap.h
Use new HASHMAP_INIT macro to simplify hashmap initialization
strmap: take advantage of FLEXPTR_ALLOC_STR when relevant
strmap: enable allocations to come from a mem_pool
strmap: add a strset sub-type
strmap: split create_entry() out of strmap_put()
strmap: add functions facilitating use as a string->int map
strmap: enable faster clearing and reusing of strmaps
strmap: add more utility functions
strmap: new utility functions
hashmap: provide deallocation function names
hashmap: introduce a new hashmap_partial_clear()
hashmap: allow re-use after hashmap_free()
hashmap: adjust spacing to fix argument alignment
hashmap: add usage documentation explaining hashmap_free[_entries]()
|
|
Preparation for a new merge strategy.
* en/merge-ort-api-null-impl:
merge,rebase,revert: select ort or recursive by config or environment
fast-rebase: demonstrate merge-ort's API via new test-tool command
merge-ort-wrappers: new convience wrappers to mimic the old merge API
merge-ort: barebones API of new merge strategy with empty implementation
|
|
Parts of "git maintenance" to ease writing crontab entries (and
other scheduling system configuration) for it.
* ds/maintenance-part-3:
maintenance: add troubleshooting guide to docs
maintenance: use 'incremental' strategy by default
maintenance: create maintenance.strategy config
maintenance: add start/stop subcommands
maintenance: add [un]register subcommands
for-each-repo: run subcommands on configured repos
maintenance: add --schedule option and config
maintenance: optionally skip --auto process
|
|
Now that hashamp has lazy initialization and a HASHMAP_INIT macro,
hashmaps allocated on the stack can be initialized without a call to
hashmap_init() and in some cases makes the code a bit shorter. Convert
some callsites over to take advantage of this.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In the verison negotiation phase between "receive-pack" and
"proc-receive", "proc-receive" can send an empty flush-pkt to end the
negotiation and use default version 0. Capabilities (such as
"push-options") are not supported in version 0.
Signed-off-by: Jiang Xin <zhiyou.jx@alibaba-inc.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Johannes found a flaky hang in `t5411/test-0013-bad-protocol.sh` in the
osx-clang job of the CI/PR builds, and ran into an issue when using
the `--stress` option with the following error messages:
fatal: unable to write flush packet: Broken pipe
send-pack: unexpected disconnect while reading sideband packet
fatal: the remote end hung up unexpectedly
In this test case, the "proc-receive" hook sends an error message and
dies earlier. While "receive-pack" on the other side of the pipe
should forward the error message of the "proc-receive" hook to the
client side, but it fails to do so. This is because "receive-pack"
uses `packet_write_fmt()` and `packet_flush()` to write pkt-line
message to "proc-receive" hook, and these functions die immediately
when pipe is broken. Using "gently" forms for these functions will get
more predicable output.
Add more "--die-*" options to test helper to test different stages of
the protocol between "receive-pack" and "proc-receive" hook.
Reported-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Suggested-by: Jeff King <peff@peff.net>
Signed-off-by: Jiang Xin <zhiyou.jx@alibaba-inc.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The side-band status report can be sent at the same time as the
primary payload multiplexed, but the demultiplexer on the receiving
end incorrectly split a single status report into two, which has
been corrected.
* js/avoid-split-sideband-message:
test-pkt-line: drop colon from sideband identity
sideband: report unhandled incomplete sideband messages as bugs
sideband: avoid reporting incomplete sideband messages
|
|
hashmap_free(), hashmap_free_entries(), and hashmap_free_() have existed
for a while, but aren't necessarily the clearest names, especially with
hashmap_partial_clear() being added to the mix and lazy-initialization
now being supported. Peff suggested we adopt the following names[1]:
- hashmap_clear() - remove all entries and de-allocate any
hashmap-specific data, but be ready for reuse
- hashmap_clear_and_free() - ditto, but free the entries themselves
- hashmap_partial_clear() - remove all entries but don't deallocate
table
- hashmap_partial_clear_and_free() - ditto, but free the entries
This patch provides the new names and converts all existing callers over
to the new naming scheme.
[1] https://lore.kernel.org/git/20201030125059.GA3277724@coredump.intra.peff.net/
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add a new test-tool command named 'fast-rebase', which is a
super-slimmed down and nowhere near as capable version of 'git rebase'.
'test-tool fast-rebase' is not currently planned for usage in the
testsuite, but is here for two purposes:
1) Demonstrate the desired API of merge-ort. In particular,
fast-rebase takes advantage of the separation of the merging
operation from the updating of the index and working tree, to
allow it to pick N commits, but only update the index and working
tree once at the end. Look for the calls to
merge_incore_nonrecursive() and merge_switch_to_result().
2) Provide a convenient benchmark that isn't polluted by the heavy
disk writing and forking of unnecessary processes that comes from
sequencer.c and merge-recursive.c. fast-rebase is not meant to
replace sequencer.c, just give ideas on how sequencer.c can be
changed. Updating sequencer.c with these goals is probably a
large amount of work; writing a simple targeted command with
no documentation, less-than-useful help messages, numerous
limitations in terms of flags it can accept and situations it can
handle, and which is flagged off from users is a much easier
interim step.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We pass "sideband: " as our identity for errors to recv_sideband(). But
it already adds the trailing colon and space. This doesn't invalidate
any tests, but it looks funny when you examine the test output.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In 2b695ecd74d (t5500: count objects through stderr, not trace,
2020-05-06) we tried to ensure that the "Total 3" message could be
grepped in Git's output, even if it sometimes got chopped up into
multiple lines in the trace machinery.
However, the first instance where this mattered now goes through the
sideband machinery, where it is _still_ possible for messages to get
chopped up: it *is* possible for the standard error stream to be sent
byte-for-byte and hence it can be easily interrupted. Meaning: it is
possible for the single line that we're looking for to be chopped up
into multiple sideband packets, with a primary packet being delivered
between them.
This seems to happen occasionally in the `vs-test` part of our CI
builds, i.e. with binaries built using Visual C, but not when building
with GCC or clang; The symptom is that t5500.43 fails to find a line
matching `remote: Total 3` in the `log` file, which ends in something
along these lines:
remote: Tota
remote: l 3 (delta 0), reused 0 (delta 0), pack-reused 0
This should not happen, though: we have code in `demultiplex_sideband()`
_specifically_ to stitch back together lines that were delivered in
separate sideband packets.
However, this stitching was broken in a subtle way in fbd76cd450
(sideband: reverse its dependency on pkt-line, 2019-01-16): before that
change, incomplete sideband lines would not be flushed upon receiving a
primary packet, but after that patch, they would be.
The subtleness of this bug comes from the fact that it is easy to get
confused by the ambiguous meaning of the `break` keyword: after writing
the primary packet contents, the `break;` in the original version of
`recv_sideband()` does _not_ break out of the `while` loop, but instead
only ends the `switch` case:
while (!retval) {
[...]
switch (band) {
[...]
case 1:
/* Write the contents of the primary packet */
write_or_die(out, buf + 1, len);
/* Here, we do *not* break out of the loop, `retval` is unchanged */
break;
[...]
}
if (outbuf.len) {
/* Write any remaining sideband messages lacking a trailing LF */
strbuf_addch(&outbuf, '\n');
xwrite(2, outbuf.buf, outbuf.len);
}
In contrast, after fbd76cd450 (sideband: reverse its dependency on
pkt-line, 2019-01-16), the body of the `while` loop was extracted into
`demultiplex_sideband()`, crucially _including_ the logic to write
incomplete sideband messages:
switch (band) {
[...]
case 1:
*sideband_type = SIDEBAND_PRIMARY;
/* This does not break out of the loop: the loop is in the caller */
break;
[...]
}
cleanup:
[...]
/* This logic is now no longer _outside_ the loop but _inside_ */
if (scratch->len) {
strbuf_addch(scratch, '\n');
xwrite(2, scratch->buf, scratch->len);
}
The correct way to fix this is to return from `demultiplex_sideband()`
early. The caller will then write out the contents of the primary packet
and continue looping. The `scratch` buffer for incomplete sideband
messages is owned by that caller, and will continue to accumulate the
remainder(s) of those messages. The loop will only end once
`demultiplex_sideband()` returned non-zero _and_ did not indicate a
primary packet, which is the case only when we hit the `cleanup:` path,
in which we take care of flushing any unfinished sideband messages and
release the `scratch` buffer.
To ensure that this does not get broken again, we introduce a pair of
subcommands of the `pkt-line` test helper that specifically chop up the
sideband message and squeeze a primary packet into the middle.
Final note: The other test case touched by 2b695ecd74d (t5500: count
objects through stderr, not trace, 2020-05-06) is not affected by this
issue because the sideband machinery is not involved there.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Code cleanup.
* jk/unused:
dir.c: drop unused "untracked" from treat_path_fast()
sequencer: handle ignore_footer when parsing trailers
test-advise: check argument count with argc instead of argv
sparse-checkout: fill in some options boilerplate
sequencer: drop repository argument from run_git_commit()
push: drop unused repo argument to do_push()
assert PARSE_OPT_NONEG in parse-options callbacks
env--helper: write to opt->value in parseopt helper
drop unused argc parameters
convert: drop unused crlf_action from check_global_conv_flags_eol()
|
|
in_merge_bases_many(), a way to see if a commit is reachable from
any commit in a set of commits, was totally broken when the
commit-graph feature was in use, which has been corrected.
* ds/in-merge-bases-many-optim-bug:
commit-reach: fix in_merge_bases_many bug
|
|
Way back in f9b8908b (commit.c: use generation numbers for
in_merge_bases(), 2018-05-01), a heuristic was used to short-circuit
the in_merge_bases() walk. This works just fine as long as the
caller is checking only two commits, but when there are multiple,
there is a possibility that this heuristic is _very wrong_.
Some code moves since then has changed this method to
repo_in_merge_bases_many() inside commit-reach.c. The heuristic
computes the minimum generation number of the "reference" list, then
compares this number to the generation number of the "commit".
In a recent topic, a test was added that used in_merge_bases_many()
to test if a commit was reachable from a number of commits pulled
from a reflog. However, this highlighted the problem: if any of the
reference commits have a smaller generation number than the given
commit, then the walk is skipped _even if there exist some with
higher generation number_.
This heuristic is wrong! It must check the MAXIMUM generation number
of the reference commits, not the MINIMUM.
This highlights a testing gap. t6600-test-reach.sh covers many
methods in commit-reach.c, including in_merge_bases() and
get_merge_bases_many(), but since these methods either restrict to
two input commits or actually look for the full list of merge bases,
they don't check this heuristic!
Add a possible input to "test-tool reach" that tests
in_merge_bases_many() and add tests to t6600-test-reach.sh that
cover this heuristic. This includes cases for the reference commits
having generation above and below the generation of the input commit,
but also having maximum generation below the generation of the input
commit.
The fix itself is to swap min_generation with a max_generation in
repo_in_merge_bases_many().
Reported-by: Srinidhi Kaushik <shrinidhi.kaushik@gmail.com>
Helped-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We complain if "test-tool advise" is not given an argument, but we
quietly ignore any additional arguments it receives. Let's instead check
that we got the expected number. As a bonus, this silences
-Wunused-parameter, which notes that we don't ever look at argc.
While we're here, we can also fix the indentation in the conditional.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Many functions take an argv/argc pair, but never actually look at argc.
This makes it useless at best (we use the NULL sentinel in argv to find
the end of the array), and misleading at worst (what happens if the argc
count does not match the argv NULL?).
In each of these instances, the argv NULL does match the argc count, so
there are no bugs here. But let's tighten the interfaces to make it
harder to get wrong (and to reduce some -Wunused-parameter complaints).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git commit-graph write" learned to limit the number of bloom
filters that are computed from scratch with the --max-new-filters
option.
* tb/bloom-improvements:
commit-graph: introduce 'commitGraph.maxNewFilters'
builtin/commit-graph.c: introduce '--max-new-filters=<n>'
commit-graph: rename 'split_commit_graph_opts'
bloom: encode out-of-bounds filters as non-empty
bloom/diff: properly short-circuit on max_changes
bloom: use provided 'struct bloom_filter_settings'
bloom: split 'get_bloom_filter()' in two
commit-graph.c: store maximum changed paths
commit-graph: respect 'commitGraph.readChangedPaths'
t/helper/test-read-graph.c: prepare repo settings
commit-graph: pass a 'struct repository *' in more places
t4216: use an '&&'-chain
commit-graph: introduce 'get_bloom_filter_settings()'
|
|
"git receive-pack" that accepts requests by "git push" learned to
outsource most of the ref updates to the new "proc-receive" hook.
* jx/proc-receive-hook:
doc: add documentation for the proc-receive hook
transport: parse report options for tracking refs
t5411: test updates of remote-tracking branches
receive-pack: new config receive.procReceiveRefs
doc: add document for capability report-status-v2
New capability "report-status-v2" for git-push
receive-pack: feed report options to post-receive
receive-pack: add new proc-receive hook
t5411: add basic test cases for proc-receive hook
transport: not report a non-head push as a branch
|
|
Add new subcommands to 'git maintenance' that start or stop background
maintenance using 'cron', when available. This integration is as simple
as I could make it, barring some implementation complications.
The schedule is laid out as follows:
0 1-23 * * * $cmd maintenance run --schedule=hourly
0 0 * * 1-6 $cmd maintenance run --schedule=daily
0 0 * * 0 $cmd maintenance run --schedule=weekly
where $cmd is a properly-qualified 'git for-each-repo' execution:
$cmd=$path/git --exec-path=$path for-each-repo --config=maintenance.repo
where $path points to the location of the Git executable running 'git
maintenance start'. This is critical for systems with multiple versions
of Git. Specifically, macOS has a system version at '/usr/bin/git' while
the version that users can install resides at '/usr/local/bin/git'
(symlinked to '/usr/local/libexec/git-core/git'). This will also use
your locally-built version if you build and run this in your development
environment without installing first.
This conditional schedule avoids having cron launch multiple 'git
for-each-repo' commands in parallel. Such parallel commands would likely
lead to the 'hourly' and 'daily' tasks competing over the object
database lock. This could lead to to some tasks never being run! Since
the --schedule=<frequency> argument will run all tasks with _at least_
the given frequency, the daily runs will also run the hourly tasks.
Similarly, the weekly runs will also run the daily and hourly tasks.
The GIT_TEST_CRONTAB environment variable is not intended for users to
edit, but instead as a way to mock the 'crontab [-l]' command. This
variable is set in test-lib.sh to avoid a future test from accidentally
running anything with the cron integration from modifying the user's
schedule. We use GIT_TEST_CRONTAB='test-tool crontab <file>' in our
tests to check how the schedule is modified in 'git maintenance
(start|stop)' commands.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When 'get_or_compute_bloom_filter()' needs to compute a Bloom filter
from scratch, it looks to the default 'struct bloom_filter_settings' in
order to determine the maximum number of changed paths, number of bits
per entry, and so on.
All of these values have so far been constant, and so there was no need
to pass in a pointer from the caller (eg., the one that is stored in the
'struct write_commit_graph_context').
Start passing in a 'struct bloom_filter_settings *' instead of using the
default values to respect graph-specific settings (eg., in the case of
setting 'GIT_TEST_BLOOM_SETTINGS_MAX_CHANGED_PATHS').
In order to have an initialized value for these settings, move its
initialization to earlier in the commit-graph write.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
'get_bloom_filter' takes a flag to control whether it will compute a
Bloom filter if the requested one is missing. In the next patch, we'll
add yet another parameter to this method, which would force all but one
caller to specify an extra 'NULL' parameter at the end.
Instead of doing this, split 'get_bloom_filter' into two functions:
'get_bloom_filter' and 'get_or_compute_bloom_filter'. The former only
looks up a Bloom filter (and does not compute one if it's missing,
thus dropping the 'compute_if_not_present' flag). The latter does
compute missing Bloom filters, with an additional parameter to store
whether or not it needed to do so.
This simplifies many call-sites, since the majority of existing callers
to 'get_bloom_filter' do not want missing Bloom filters to be computed
(so they can drop the parameter entirely and use the simpler version of
the function).
While we're at it, instrument the new 'get_or_compute_bloom_filter()'
with counters in the 'write_commit_graph_context' struct which store
the number of filters that we did and didn't compute, as well as filters
that were truncated.
It would be nice to drop the 'compute_if_not_present' flag entirely,
since all remaining callers of 'get_or_compute_bloom_filter' pass it as
'1', but this will change in a future patch and hence cannot be removed.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The read-graph test-tool is used by a number of the commit-graph test to
assert various properties about a commit-graph. Previously, this program
never ran 'prepare_repo_settings()'. There was no need to do so, since
none of the commit-graph machinery is affected by the repo settings.
In the next patch, the commit-graph machinery's behavior will become
dependent on the repo settings, and so loading them before running the
rest of the test tool is critical.
As such, teach the test tool to call 'prepare_repo_settings()'.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Trim an unused binary and turn a bunch of commands into built-in.
* jk/slimmed-down:
drop vcs-svn experiment
make git-fast-import a builtin
make git-bugreport a builtin
make credential helpers builtins
Makefile: drop builtins from MSVC pdb list
|
|
Code clean-up.
* jk/leakfix:
submodule--helper: fix leak of core.worktree value
config: fix leak in git_config_get_expiry_in_days()
config: drop git_config_get_string_const()
config: fix leaks from git_config_get_string_const()
checkout: fix leak of non-existent branch names
submodule--helper: use strbuf_release() to free strbufs
clear_pattern_list(): clear embedded hashmaps
|
|
Git calls an internal `execute_commands` function to handle commands
sent from client to `git-receive-pack`. Regardless of what references
the user pushes, git creates or updates the corresponding references if
the user has write-permission. A contributor who has no
write-permission, cannot push to the repository directly. So, the
contributor has to write commits to an alternate location, and sends
pull request by emails or by other ways. We call this workflow as a
distributed workflow.
It would be more convenient to work in a centralized workflow like what
Gerrit provided for some cases. For example, a read-only user who
cannot push to a branch directly can run the following `git push`
command to push commits to a pseudo reference (has a prefix "refs/for/",
not "refs/heads/") to create a code review.
git push origin \
HEAD:refs/for/<branch-name>/<session>
The `<branch-name>` in the above example can be as simple as "master",
or a more complicated branch name like "foo/bar". The `<session>` in
the above example command can be the local branch name of the client
side, such as "my/topic".
We cannot implement a centralized workflow elegantly by using
"pre-receive" + "post-receive", because Git will call the internal
function "execute_commands" to create references (even the special
pseudo reference) between these two hooks. Even though we can delete
the temporarily created pseudo reference via the "post-receive" hook,
having a temporary reference is not safe for concurrent pushes.
So, add a filter and a new handler to support this kind of workflow.
The filter will check the prefix of the reference name, and if the
command has a special reference name, the filter will turn a specific
field (`run_proc_receive`) on for the command. Commands with this filed
turned on will be executed by a new handler (a hook named
"proc-receive") instead of the internal `execute_commands` function.
We can use this "proc-receive" command to create pull requests or send
emails for code review.
Suggested by Junio, this "proc-receive" hook reads the commands,
push-options (optional), and send result using a protocol in pkt-line
format. In the following example, the letter "S" stands for
"receive-pack" and letter "H" stands for the hook.
# Version and features negotiation.
S: PKT-LINE(version=1\0push-options atomic...)
S: flush-pkt
H: PKT-LINE(version=1\0push-options...)
H: flush-pkt
# Send commands from server to the hook.
S: PKT-LINE(<old-oid> <new-oid> <ref>)
S: ... ...
S: flush-pkt
# Send push-options only if the 'push-options' feature is enabled.
S: PKT-LINE(push-option)
S: ... ...
S: flush-pkt
# Receive result from the hook.
# OK, run this command successfully.
H: PKT-LINE(ok <ref>)
# NO, I reject it.
H: PKT-LINE(ng <ref> <reason>)
# Fall through, let 'receive-pack' to execute it.
H: PKT-LINE(ok <ref>)
H: PKT-LINE(option fall-through)
# OK, but has an alternate reference. The alternate reference name
# and other status can be given in options
H: PKT-LINE(ok <ref>)
H: PKT-LINE(option refname <refname>)
H: PKT-LINE(option old-oid <old-oid>)
H: PKT-LINE(option new-oid <new-oid>)
H: PKT-LINE(option forced-update)
H: ... ...
H: flush-pkt
After receiving a command, the hook will execute the command, and may
create/update different reference. For example, a command for a pseudo
reference "refs/for/master/topic" may create/update different reference
such as "refs/pull/123/head". The alternate reference name and other
status are given in option lines.
The list of commands returned from "proc-receive" will replace the
relevant commands that are sent from user to "receive-pack", and
"receive-pack" will continue to run the "execute_commands" function and
other routines. Finally, the result of the execution of these commands
will be reported to end user.
The reporting function from "receive-pack" to "send-pack" will be
extended in latter commit just like what the "proc-receive" hook reports
to "receive-pack".
Signed-off-by: Jiang Xin <zhiyou.jx@alibaba-inc.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Similar to the commit-graph format, the multi-pack-index format has a
byte in the header intended to track the hash version used to write the
file. This allows one to interpret the hash length without having the
context of the repository config specifying the hash length. This was
not modified as part of the SHA-256 work because the hash length was
automatically up-shifted due to that config.
Since we have this byte available, we can make the file formats more
obviously incompatible instead of relying on other context from the
repository.
Add a new oid_version() method in midx.c similar to the one in
commit-graph.c. This is specifically made separate from that
implementation to avoid artificially linking the formats.
The test impact requires a few more things than the corresponding change
in the commit-graph format. Specifically, 'test-tool read-midx' was not
writing anything about this header value to output. Since the value
available in 'struct multi_pack_index' is hash_len instead of a version
value, we output "20" or "32" instead of "1" or "2".
Since we want a user to not have their Git commands fail if their
multi-pack-index has the incorrect hash version compared to the
repository's hash version, we relax the die() to an error() in
load_multi_pack_index(). This has some effect on 'git multi-pack-index
verify' as we need to check that a failed parse of a file that exists is
actually a verify error. For that test that checks the hash version
matches, we change the corrupted byte from "2" to "3" to ensure the test
fails for both hash algorithms.
Helped-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Reviewed-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
There are two functions to get a single config string:
- git_config_get_string()
- git_config_get_string_const()
One might naively think that the first one allocates a new string and
the second one just points us to the internal configset storage. But
in fact they both allocate a new copy; the second one exists only to
avoid having to cast when using it with a const global which we never
intend to free.
The documentation for the function explains that clearly, but it seems
I'm not alone in being surprised by this. Of 17 calls to the function,
13 of them leak the resulting value.
We could obviously fix these by adding the appropriate free(). But it
would be simpler still if we actually had a non-allocating way to get
the string. There's git_config_get_value() but that doesn't quite do
what we want. If the config key is present but is a boolean with no
value (e.g., "[foo]bar" in the file), then we'll get NULL (whereas the
string versions will print an error and die).
So let's introduce a new variant, git_config_get_string_tmp(), that
behaves as these callers expect. We need a new name because we have new
semantics but the same function signature (so even if we converted the
four remaining callers, topics in flight might be surprised). The "tmp"
is because this value should only be held onto for a short time. In
practice it's rare for us to clear and refresh the configset,
invalidating the pointer, but hopefully the "tmp" makes callers think
about the lifetime. In each of the converted cases here the value only
needs to last within the local function or its immediate caller.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The code in vcs-svn was started in 2010 as an attempt to build a
remote-helper for interacting with svn repositories (as opposed to
git-svn). However, we never got as far as shipping a mature remote
helper, and the last substantive commit was e99d012a6bc in 2012.
We do have a git-remote-testsvn, and it is even installed as part of
"make install". But given the name, it seems unlikely to be used by
anybody (you'd have to explicitly "git clone testsvn::$url", and there
have been zero mentions of that on the mailing list since 2013, and even
that includes the phrase "you might need to hack a bit to get it working
properly"[1]).
We also ship contrib/svn-fe, which builds on the vcs-svn work. However,
it does not seem to build out of the box for me, as the link step misses
some required libraries for using libgit.a. Curiously, the original
build breakage bisects for me to eff80a9fd9 (Allow custom "comment
char", 2013-01-16), which seems unrelated. There was an attempt to fix
it in da011cb0e7 (contrib/svn-fe: fix Makefile, 2014-08-28), but on my
system that only switches the error message.
So it seems like the result is not really usable by anybody in practice.
It would be wonderful if somebody wanted to pick up the topic again, and
potentially it's worth carrying around for that reason. But the flip
side is that people doing tree-wide operations have to deal with this
code. And you can see the list with (replace "HEAD" with this commit as
appropriate):
{
echo "--"
git diff-tree --diff-filter=D -r --name-only HEAD^ HEAD
} |
git log --no-merges --oneline e99d012a6bc.. --stdin
which shows 58 times somebody had to deal with the code, generally due
to a compile or test failure, or a tree-wide style fix or API change.
Let's drop it and let anybody who wants to pick it up do so by
resurrecting it from the git history.
As a bonus, this also reduces the size of a stripped installation of Git
from 21MB to 19MB.
[1] https://lore.kernel.org/git/CALkWK0mPHzKfzFKKpZkfAus3YVC9NFYDbFnt+5JQYVKipk3bQQ@mail.gmail.com/
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The final leg of SHA-256 transition.
* bc/sha-256-part-3: (39 commits)
t: remove test_oid_init in tests
docs: add documentation for extensions.objectFormat
ci: run tests with SHA-256
t: make SHA1 prerequisite depend on default hash
t: allow testing different hash algorithms via environment
t: add test_oid option to select hash algorithm
repository: enable SHA-256 support by default
setup: add support for reading extensions.objectformat
bundle: add new version for use with SHA-256
builtin/verify-pack: implement an --object-format option
http-fetch: set up git directory before parsing pack hashes
t0410: mark test with SHA1 prerequisite
t5308: make test work with SHA-256
t9700: make hash size independent
t9500: ensure that algorithm info is preserved in config
t9350: make hash size independent
t9301: make hash size independent
t9300: use $ZERO_OID instead of hard-coded object ID
t9300: abstract away SHA-1-specific constants
t8011: make hash size independent
...
|
|
The "argc" and "argv" names made sense when the struct was argv_array,
but now they're just confusing. Let's rename them to "nr" (which we use
for counts elsewhere) and "v" (which is rather terse, but reads well
when combined with typical variable names like "args.v").
Note that we have to update all of the callers immediately. Playing
tricks with the preprocessor is hard here, because we wouldn't want to
rewrite unrelated tokens.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The bloom filter code relies on reading object IDs using parse_oid_hex.
In order to make that work with an appropriate size, we need to have
initialized the repository's hash algorithm. Since the values we're
processing depend on the repository in use, let's set up the repository
when we run the test helper.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Reviewed-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Code which split an argv_array call across multiple lines, like:
argv_array_pushl(&args, "one argument",
"another argument", "and more",
NULL);
was recently mechanically renamed to use strvec, which results in
mis-matched indentation like:
strvec_pushl(&args, "one argument",
"another argument", "and more",
NULL);
Let's fix these up to align the arguments with the opening paren. I did
this manually by sifting through the results of:
git jump grep 'strvec_.*,$'
and liberally applying my editor's auto-format. Most of the changes are
of the form shown above, though I also normalized a few that had
originally used a single-tab indentation (rather than our usual style of
aligning with the open paren). I also rewrapped a couple of obvious
cases (e.g., where previously too-long lines became short enough to fit
on one), but I wasn't aggressive about it. In cases broken to three or
more lines, the grouping of arguments is sometimes meaningful, and it
wasn't worth my time or reviewer time to ponder each case individually.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We eventually want to drop the argv_array name and just use strvec
consistently. There's no particular reason we have to do it all at once,
or care about interactions between converted and unconverted bits.
Because of our preprocessor compat layer, the names are interchangeable
to the compiler (so even a definition and declaration using different
names is OK).
This patch converts all of the remaining files, as the resulting diff is
reasonably sized.
The conversion was done purely mechanically with:
git ls-files '*.c' '*.h' |
xargs perl -i -pe '
s/ARGV_ARRAY/STRVEC/g;
s/argv_array/strvec/g;
'
We'll deal with any indentation/style fallouts separately.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This requires updating #include lines across the code-base, but that's
all fairly mechanical, and was done with:
git ls-files '*.c' '*.h' |
xargs perl -i -pe 's/argv-array.h/strvec.h/'
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Code clean-up.
* cb/is-descendant-of:
commit-reach: avoid is_descendant_of() shim
|
|
API cleanup for get_worktrees()
* es/get-worktrees-unsort:
worktree: drop get_worktrees() unused 'flags' argument
worktree: drop get_worktrees() special-purpose sorting option
|
|
A few fields in "struct commit" that do not have to always be
present have been moved to commit slabs.
* ak/commit-graph-to-slab:
commit-graph: minimize commit_graph_data_slab access
commit: move members graph_pos, generation to a slab
commit-graph: introduce commit_graph_data_slab
object: drop parsed_object_pool->commit_count
|
|
SHA-256 migration work continues.
* bc/sha-256-part-2: (44 commits)
remote-testgit: adapt for object-format
bundle: detect hash algorithm when reading refs
t5300: pass --object-format to git index-pack
t5704: send object-format capability with SHA-256
t5703: use object-format serve option
t5702: offer an object-format capability in the test
t/helper: initialize the repository for test-sha1-array
remote-curl: avoid truncating refs with ls-remote
t1050: pass algorithm to index-pack when outside repo
builtin/index-pack: add option to specify hash algorithm
remote-curl: detect algorithm for dumb HTTP by size
builtin/ls-remote: initialize repository based on fetch
t5500: make hash independent
serve: advertise object-format capability for protocol v2
connect: parse v2 refs with correct hash algorithm
connect: pass full packet reader when parsing v2 refs
Documentation/technical: document object-format for protocol v2
t1302: expect repo format version 1 for SHA-256
builtin/show-index: provide options to determine hash algo
t5302: modernize test formatting
...
|
|
d91d6fbf26 (commit-reach: create repo_is_descendant_of(), 2020-06-17)
adds a repository aware version of is_descendant_of() and a backward
compatibility shim that is barely used.
Update all callers to directly use the new repo_is_descendant_of()
function instead; making the codebase simpler and pushing more
the_repository references higher up the stack.
Helped-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Carlo Marcelo Arenas Belón <carenas@gmail.com>
Reviewed-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
get_worktrees() accepts a 'flags' argument, however, there are no
existing flags (the lone flag GWT_SORT_LINKED was recently retired) and
no behavior which can be tweaked. Therefore, drop the 'flags' argument.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
test-sha1-array uses the_hash_algo under the hood. Since t0064 wants to
use the value that is correct for the hash algorithm that we're testing,
make sure the test helper initializes the repository to set
the_hash_algo correctly.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
14ba97f8 (alloc: allow arbitrary repositories for alloc functions,
2018-05-15) introduced parsed_object_pool->commit_count to keep count of
commits per repository and was used to assign commit->index.
However, commit-slab code requires commit->index values to be unique
and a global count would be correct, rather than a per-repo count.
Let's introduce a static counter variable, `parsed_commits_count` to
keep track of parsed commits so far.
As commit_count has no use anymore, let's also drop it from the struct.
Signed-off-by: Abhishek Kumar <abhishekkumar8222@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
On-the-wire protocol v2 easily falls into a deadlock between the
remote-curl helper and the fetch-pack process when the server side
prematurely throws an error and disconnects. The communication has
been updated to make it more robust.
* dl/remote-curl-deadlock-fix:
stateless-connect: send response end packet
pkt-line: define PACKET_READ_RESPONSE_END
remote-curl: error on incomplete packet
pkt-line: extern packet_length()
transport: extract common fetch_pack() call
remote-curl: remove label indentation
remote-curl: fix typo
|
|
As FreeBSD is not the only platform whose regexp library reports
a REG_ILLSEQ error when fed invalid UTF-8, add logic to detect that
automatically and skip the affected tests.
* cb/t4210-illseq-auto-detect:
t4210: detect REG_ILLSEQ dynamically and skip affected tests
t/helper: teach test-regex to report pattern errors (like REG_ILLSEQ)
|
|
In a future commit, we will use PACKET_READ_RESPONSE_END to separate
messages proxied by remote-curl. To prepare for this, add the
PACKET_READ_RESPONSE_END enum value.
In switch statements that need a case added, die() or BUG() when a
PACKET_READ_RESPONSE_END is unexpected. Otherwise, mirror how
PACKET_READ_DELIM is implemented (especially in cases where packets are
being forwarded).
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
7187c7bbb8 (t4210: skip i18n tests that don't work on FreeBSD, 2019-11-27)
adds a REG_ILLSEQ prerequisite to avoid failures from the tests added in
4e2443b181 (log tests: test regex backends in "--encode=<enc>" tests,
2019-06-28), but hardcodes it to be only enabled in FreeBSD.
Instead of hardcoding the affected platform, teach the test-regex helper,
how to validate a pattern and report back, so it can be used to detect the
same issue in other affected systems (like DragonFlyBSD or macOS).
While at it, refactor the tool so it can report back the source of the
errors it founds, and can be invoked also in a --silent mode, when needed,
for backward compatibility. A missing flag has been added and the code
reformatted, as well as updates to the way the parameters are handled, for
consistency.
To minimize changes, it is assumed the regcomp error is of the right type
since we control the only caller, and is also assumed to affect both basic
and extended syntax (only basic is tested, but both behave the same in all
three affected platforms since they use the same function).
Based-on-patch-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Carlo Marcelo Arenas Belón <carenas@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Code cleanup and typofixes
* ds/bloom-cleanup:
completion: offer '--(no-)patch' among 'git log' options
bloom: use num_changes not nr for limit detection
bloom: de-duplicate directory entries
Documentation: changed-path Bloom filters use byte words
bloom: parse commit before computing filters
test-bloom: fix usage typo
bloom: fix whitespace around tab length
|
|
* We need a `final_new_line` to make our source code as text file, per
POSIX and C specification.
* `bloom_filters` should be limited to interal linkage only
Signed-off-by: Đoàn Trần Công Danh <congdanhqx@gmail.com>
Signed-off-by: Ramsay Jones <ramsay@ramsayjones.plus.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
Jeff King
Junio C Hamano
Elijah Newren
Jiang Xin
Johannes Schindelin
Derrick Stolee
Taylor Blau
Jiang Xin
brian m. carlson
Carlo Marcelo Arenas Belón
Eric Sunshine
Abhishek Kumar
Denton Liu
Đoàn Trần Công Danh