| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Improve the support for invalid UTF-8 haystacks given a non-ASCII
needle when using the PCREv2 backend.
This is a more complete fix for a bug I started to fix in
870eea8166 (grep: do not enter PCRE2_UTF mode on fixed matching,
2019-07-26), now that PCREv2 has the PCRE2_MATCH_INVALID_UTF mode we
can make use of it.
This fixes the sort of case described in 8a5999838e (grep: stess test
PCRE v2 on invalid UTF-8 data, 2019-07-26), i.e.:
- The subject string is non-ASCII (e.g. "ævar")
- We're under a is_utf8_locale(), e.g. "en_US.UTF-8", not "C"
- We are using --ignore-case, or we're a non-fixed pattern
If those conditions were satisfied and we matched found non-valid
UTF-8 data PCREv2 might bark on it, in practice this only happened
under the JIT backend (turned on by default on most platforms).
Ultimately this fixes a "regression" in b65abcafc7 ("grep: use PCRE v2
for optimized fixed-string search", 2019-07-01), I'm putting that in
scare-quotes because before then we wouldn't properly support these
complex case-folding, locale etc. cases either, it just broke in
different ways.
There was a bug related to this the PCRE2_NO_START_OPTIMIZE flag fixed
in PCREv2 10.36. It can be worked around by setting the
PCRE2_NO_START_OPTIMIZE flag. Let's do that in those cases, and add
tests for the bug.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Preparation for a new merge strategy.
* en/merge-ort-api-null-impl:
merge,rebase,revert: select ort or recursive by config or environment
fast-rebase: demonstrate merge-ort's API via new test-tool command
merge-ort-wrappers: new convience wrappers to mimic the old merge API
merge-ort: barebones API of new merge strategy with empty implementation
|
|
Parts of "git maintenance" to ease writing crontab entries (and
other scheduling system configuration) for it.
* ds/maintenance-part-3:
maintenance: add troubleshooting guide to docs
maintenance: use 'incremental' strategy by default
maintenance: create maintenance.strategy config
maintenance: add start/stop subcommands
maintenance: add [un]register subcommands
for-each-repo: run subcommands on configured repos
maintenance: add --schedule option and config
maintenance: optionally skip --auto process
|
|
Add a new test-tool command named 'fast-rebase', which is a
super-slimmed down and nowhere near as capable version of 'git rebase'.
'test-tool fast-rebase' is not currently planned for usage in the
testsuite, but is here for two purposes:
1) Demonstrate the desired API of merge-ort. In particular,
fast-rebase takes advantage of the separation of the merging
operation from the updating of the index and working tree, to
allow it to pick N commits, but only update the index and working
tree once at the end. Look for the calls to
merge_incore_nonrecursive() and merge_switch_to_result().
2) Provide a convenient benchmark that isn't polluted by the heavy
disk writing and forking of unnecessary processes that comes from
sequencer.c and merge-recursive.c. fast-rebase is not meant to
replace sequencer.c, just give ideas on how sequencer.c can be
changed. Updating sequencer.c with these goals is probably a
large amount of work; writing a simple targeted command with
no documentation, less-than-useful help messages, numerous
limitations in terms of flags it can accept and situations it can
handle, and which is flagged off from users is a much easier
interim step.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add new subcommands to 'git maintenance' that start or stop background
maintenance using 'cron', when available. This integration is as simple
as I could make it, barring some implementation complications.
The schedule is laid out as follows:
0 1-23 * * * $cmd maintenance run --schedule=hourly
0 0 * * 1-6 $cmd maintenance run --schedule=daily
0 0 * * 0 $cmd maintenance run --schedule=weekly
where $cmd is a properly-qualified 'git for-each-repo' execution:
$cmd=$path/git --exec-path=$path for-each-repo --config=maintenance.repo
where $path points to the location of the Git executable running 'git
maintenance start'. This is critical for systems with multiple versions
of Git. Specifically, macOS has a system version at '/usr/bin/git' while
the version that users can install resides at '/usr/local/bin/git'
(symlinked to '/usr/local/libexec/git-core/git'). This will also use
your locally-built version if you build and run this in your development
environment without installing first.
This conditional schedule avoids having cron launch multiple 'git
for-each-repo' commands in parallel. Such parallel commands would likely
lead to the 'hourly' and 'daily' tasks competing over the object
database lock. This could lead to to some tasks never being run! Since
the --schedule=<frequency> argument will run all tasks with _at least_
the given frequency, the daily runs will also run the hourly tasks.
Similarly, the weekly runs will also run the daily and hourly tasks.
The GIT_TEST_CRONTAB environment variable is not intended for users to
edit, but instead as a way to mock the 'crontab [-l]' command. This
variable is set in test-lib.sh to avoid a future test from accidentally
running anything with the cron integration from modifying the user's
schedule. We use GIT_TEST_CRONTAB='test-tool crontab <file>' in our
tests to check how the schedule is modified in 'git maintenance
(start|stop)' commands.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Git calls an internal `execute_commands` function to handle commands
sent from client to `git-receive-pack`. Regardless of what references
the user pushes, git creates or updates the corresponding references if
the user has write-permission. A contributor who has no
write-permission, cannot push to the repository directly. So, the
contributor has to write commits to an alternate location, and sends
pull request by emails or by other ways. We call this workflow as a
distributed workflow.
It would be more convenient to work in a centralized workflow like what
Gerrit provided for some cases. For example, a read-only user who
cannot push to a branch directly can run the following `git push`
command to push commits to a pseudo reference (has a prefix "refs/for/",
not "refs/heads/") to create a code review.
git push origin \
HEAD:refs/for/<branch-name>/<session>
The `<branch-name>` in the above example can be as simple as "master",
or a more complicated branch name like "foo/bar". The `<session>` in
the above example command can be the local branch name of the client
side, such as "my/topic".
We cannot implement a centralized workflow elegantly by using
"pre-receive" + "post-receive", because Git will call the internal
function "execute_commands" to create references (even the special
pseudo reference) between these two hooks. Even though we can delete
the temporarily created pseudo reference via the "post-receive" hook,
having a temporary reference is not safe for concurrent pushes.
So, add a filter and a new handler to support this kind of workflow.
The filter will check the prefix of the reference name, and if the
command has a special reference name, the filter will turn a specific
field (`run_proc_receive`) on for the command. Commands with this filed
turned on will be executed by a new handler (a hook named
"proc-receive") instead of the internal `execute_commands` function.
We can use this "proc-receive" command to create pull requests or send
emails for code review.
Suggested by Junio, this "proc-receive" hook reads the commands,
push-options (optional), and send result using a protocol in pkt-line
format. In the following example, the letter "S" stands for
"receive-pack" and letter "H" stands for the hook.
# Version and features negotiation.
S: PKT-LINE(version=1\0push-options atomic...)
S: flush-pkt
H: PKT-LINE(version=1\0push-options...)
H: flush-pkt
# Send commands from server to the hook.
S: PKT-LINE(<old-oid> <new-oid> <ref>)
S: ... ...
S: flush-pkt
# Send push-options only if the 'push-options' feature is enabled.
S: PKT-LINE(push-option)
S: ... ...
S: flush-pkt
# Receive result from the hook.
# OK, run this command successfully.
H: PKT-LINE(ok <ref>)
# NO, I reject it.
H: PKT-LINE(ng <ref> <reason>)
# Fall through, let 'receive-pack' to execute it.
H: PKT-LINE(ok <ref>)
H: PKT-LINE(option fall-through)
# OK, but has an alternate reference. The alternate reference name
# and other status can be given in options
H: PKT-LINE(ok <ref>)
H: PKT-LINE(option refname <refname>)
H: PKT-LINE(option old-oid <old-oid>)
H: PKT-LINE(option new-oid <new-oid>)
H: PKT-LINE(option forced-update)
H: ... ...
H: flush-pkt
After receiving a command, the hook will execute the command, and may
create/update different reference. For example, a command for a pseudo
reference "refs/for/master/topic" may create/update different reference
such as "refs/pull/123/head". The alternate reference name and other
status are given in option lines.
The list of commands returned from "proc-receive" will replace the
relevant commands that are sent from user to "receive-pack", and
"receive-pack" will continue to run the "execute_commands" function and
other routines. Finally, the result of the execution of these commands
will be reported to end user.
The reporting function from "receive-pack" to "send-pack" will be
extended in latter commit just like what the "proc-receive" hook reports
to "receive-pack".
Signed-off-by: Jiang Xin <zhiyou.jx@alibaba-inc.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Introduce an extension to the commit-graph to make it efficient to
check for the paths that were modified at each commit using Bloom
filters.
* gs/commit-graph-path-filter:
bloom: ignore renames when computing changed paths
commit-graph: add GIT_TEST_COMMIT_GRAPH_CHANGED_PATHS test flag
t4216: add end to end tests for git log with Bloom filters
revision.c: add trace2 stats around Bloom filter usage
revision.c: use Bloom filters to speed up path based revision walks
commit-graph: add --changed-paths option to write subcommand
commit-graph: reuse existing Bloom filters during write
commit-graph: write Bloom filters to commit graph file
commit-graph: examine commits by generation number
commit-graph: examine changed-path objects in pack order
commit-graph: compute Bloom filters for changed paths
diff: halt tree-diff early after max_changes
bloom.c: core Bloom filter implementation for changed paths.
bloom.c: introduce core Bloom filter constructs
bloom.c: add the murmur3 hash implementation
commit-graph: define and use MAX_NUM_CHUNKS
|
|
Code cleanup.
* jk/oid-array-cleanups:
oidset: stop referring to sha1-array
ref-filter: stop referring to "sha1 array"
bisect: stop referring to sha1_array
test-tool: rename sha1-array to oid-array
oid_array: rename source file from sha1-array
oid_array: use size_t for iteration
oid_array: use size_t for count and allocation
|
|
Trace2 enhancement to allow logging of the environment variables.
* js/trace2-env-vars:
trace2: teach Git to log environment variables
|
|
This matches the actual data structure name, as well as the source file
that contains the code we're testing. The test scripts need updating to
use the new name, as well.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In preparation for computing changed paths Bloom filters,
implement the Murmur3 hash algorithm as described in [1].
It hashes the given data using the given seed and produces
a uniformly distributed hash value.
[1] https://en.wikipedia.org/wiki/MurmurHash#Algorithm
Helped-by: Derrick Stolee <dstolee@microsoft.com>
Helped-by: Szeder Gábor <szeder.dev@gmail.com>
Reviewed-by: Jakub Narębski <jnareb@gmail.com>
Signed-off-by: Garima Singh <garima.singh@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Revamping of the advise API to allow more systematic enumeration of
advice knobs in the future.
* hw/advise-ng:
tag: use new advice API to check visibility
advice: revamp advise API
advice: change "setupStreamFailure" to "setUpstreamFailure"
advice: extract vadvise() from advise()
|
|
Via trace2, Git can already log interesting config parameters (see the
trace2_cmd_list_config() function). However, this can grant an
incomplete picture because many config parameters also allow overrides
via environment variables.
To allow for more complete logs, we add a new trace2_cmd_list_env_vars()
function and supporting implementation, modeled after the pre-existing
config param logging implementation.
Signed-off-by: Josh Steadmon <steadmon@google.com>
Acked-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Currently it's very easy for the advice library's callers to miss
checking the visibility step before printing an advice. Also, it makes
more sense for this step to be handled by the advice library.
Add a new advise_if_enabled function that checks the visibility of
advice messages before printing.
Add a new helper advise_enabled to check the visibility of the advice
if the caller needs to carry out complicated processing based on that
value.
A list of advice_settings is added to cache the config variables names
and values, it's intended to replace advice_config[] and the global
variables once we migrate all the callers to use the new APIs.
Signed-off-by: Heba Waly <heba.waly@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Previously, `parse_pathspec_file()` was tested indirectly by invoking
git commands with properly crafted inputs. As demonstrated by the
previous bugfix, testing complicated black boxes indirectly can lead to
tests that silently test the wrong thing.
Introduce direct tests for `parse_pathspec_file()`.
Signed-off-by: Alexandr Miloslavskiy <alexandr.miloslavskiy@syntevo.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The 'git commit-graph read' subcommand is used in test scripts to check
that the commit-graph contents match the expected data. Mostly, this
helps check the header information and the list of chunks. Users do not
need this information, so move the functionality to a test helper.
Reported-by: Bryan Turner <bturner@atlassian.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
'progress.c' has seen a few fixes recently [1], and, unfortunately,
some of those fixes required further fixes [2]. It seems it's time to
have a few tests focusing on the subtleties of the progress display.
Add the 'test-tool progress' subcommand to help testing the progress
display, reading instructions from standard input and turning them
into calls to the display_progress() and display_throughput()
functions with the given parameters.
The progress display is, however, critically dependent on timing,
because it's only updated once every second or, if the toal is known
in advance, every 1%, and there is the throughput rate as well. These
make the progress display far too undeterministic for testing as-is.
To address this, add a few testing-specific variables and functions to
'progress.c', allowing the the new test helper to:
- Disable the triggered-every-second SIGALRM and set the
'progress_update' flag explicitly based in the input instructions.
This way the progress line will be updated deterministically when
the test wants it to be updated.
- Specify the time elapsed since start_progress() to make the
throughput rate calculations deterministic.
Add the new test script 't0500-progress-display.sh' to check a few
simple cases with and without throughput, and that a shorter progress
line properly covers up the previously displayed line in different
situations.
[1] See commits 545dc345eb (progress: break too long progress bar
lines, 2019-04-12) and 9f1fd84e15 (progress: clear previous
progress update dynamically, 2019-04-12).
[2] 1aed1a5f25 (progress: avoid empty line when breaking the progress
line, 2019-05-19)
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Adjust the dir-iterator API and apply it to the local clone
optimization codepath.
* mt/dir-iterator-updates:
clone: replace strcmp by fspathcmp
clone: use dir-iterator to avoid explicit dir traversal
clone: extract function from copy_or_link_directory
clone: copy hidden paths at local clone
dir-iterator: add flags parameter to dir_iterator_begin
dir-iterator: refactor state machine model
dir-iterator: use warning_errno when possible
dir-iterator: add tests for dir-iterator API
clone: better handle symlinked files at .git/objects/
clone: test for our behavior on odd objects/* content
|
|
Create t/helper/test-dir-iterator.c, which prints relevant information
about a directory tree iterated over with dir-iterator.
Create t/t0066-dir-iterator.sh, which tests that dir-iterator does
iterate through a whole directory tree as expected.
Signed-off-by: Daniel Ferreira <bnmvco@gmail.com>
[matheus.bernardino: update to use test-tool and some minor aesthetics]
Helped-by: Matheus Tavares <matheus.bernardino@usp.br>
Signed-off-by: Matheus Tavares <matheus.bernardino@usp.br>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This new helper is very similar to "test-hashmap.c" and will help
test how `struct oidmap` from oidmap.{c,h} can be used.
Helped-by: SZEDER Gábor <szeder.dev@gmail.com>
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"make check-docs", "git help -a", etc. did not account for cases
where a particular build may deliberately omit some subcommands,
which has been corrected.
* js/misc-doc-fixes:
Turn `git serve` into a test helper
test-tool: handle the `-C <directory>` option just like `git`
check-docs: do not bother checking for legacy scripts' documentation
docs: exclude documentation for commands that have been excluded
check-docs: allow command-list.txt to contain excluded commands
help -a: do not list commands that are excluded from the build
Makefile: drop the NO_INSTALL variable
remote-testgit: move it into the support directory for t5801
|
|
The `git serve` built-in was introduced in ed10cb952d31 (serve:
introduce git-serve, 2018-03-15) as a backend to serve Git protocol v2,
probably originally intended to be spawned by `git upload-pack`.
However, in the version that the protocol v2 patches made it into core
Git, `git upload-pack` calls the `serve()` function directly instead of
spawning `git serve`; The only reason in life for `git serve` to survive
as a built-in command is to provide a way to test the protocol v2
functionality.
Meaning that it does not even have to be a built-in that is installed
with end-user facing Git installations, but it can be a test helper
instead.
Let's make it so.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In preparation for moving `git serve` into `test-tool` (because it
really is only used by the test suite), we teach the `test-tool` the
useful trick to change the working directory before running the test
command, which will avoid introducing subshells in the test code.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Create unit tests for Trace2.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Create a new unified tracing facility for git. The eventual intent is to
replace the current trace_printf* and trace_performance* routines with a
unified set of git_trace2* routines.
In addition to the usual printf-style API, trace2 provides higer-level
event verbs with fixed-fields allowing structured data to be written.
This makes post-processing and analysis easier for external tools.
Trace2 defines 3 output targets. These are set using the environment
variables "GIT_TR2", "GIT_TR2_PERF", and "GIT_TR2_EVENT". These may be
set to "1" or to an absolute pathname (just like the current GIT_TRACE).
* GIT_TR2 is intended to be a replacement for GIT_TRACE and logs command
summary data.
* GIT_TR2_PERF is intended as a replacement for GIT_TRACE_PERFORMANCE.
It extends the output with columns for the command process, thread,
repo, absolute and relative elapsed times. It reports events for
child process start/stop, thread start/stop, and per-thread function
nesting.
* GIT_TR2_EVENT is a new structured format. It writes event data as a
series of JSON records.
Calls to trace2 functions log to any of the 3 output targets enabled
without the need to call different trace_printf* or trace_performance*
routines.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In cc95bc2025 (t5562: replace /dev/zero with a pipe from
generate_zero_bytes, 2019-02-09), we replaced usage of /dev/zero (which
is not available on NonStop, apparently) by a Perl script snippet to
generate NUL bytes.
Sadly, it does not seem to work on NonStop, as t5562 reportedly hangs.
Worse, this also hangs in the Ubuntu 16.04 agents of the CI builds on
Azure Pipelines: for some reason, the Perl script snippet that is run
via `generate_zero_bytes` in t5562's 'CONTENT_LENGTH overflow ssite_t'
test case tries to write out an infinite amount of NUL bytes unless a
broken pipe is encountered, that snippet never encounters the broken
pipe, and keeps going until the build times out.
Oddly enough, this does not reproduce on the Windows and macOS agents,
nor in a local Ubuntu 18.04.
This developer tried for a day to figure out the exact circumstances
under which this hang happens, to no avail, the details remain a
mystery.
In the end, though, what counts is that this here change incidentally
fixes that hang (maybe also on NonStop?). Even more positively, it gets
rid of yet another unnecessary Perl invocation.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Prepare to run test suite on Azure Pipeline.
* js/vsts-ci: (22 commits)
test-date: drop unused parameter to getnanos()
ci: parallelize testing on Windows
ci: speed up Windows phase
tests: optionally skip bin-wrappers/
t0061: workaround issues with --with-dashes and RUNTIME_PREFIX
tests: add t/helper/ to the PATH with --with-dashes
mingw: try to work around issues with the test cleanup
tests: include detailed trace logs with --write-junit-xml upon failure
tests: avoid calling Perl just to determine file sizes
README: add a build badge (status of the Azure Pipelines build)
mingw: be more generous when wrapping up the setitimer() emulation
ci: use git-sdk-64-minimal build artifact
ci: add a Windows job to the Azure Pipelines definition
Add a build definition for Azure DevOps
ci/lib.sh: add support for Azure Pipelines
tests: optionally write results as JUnit-style .xml
test-date: add a subcommand to measure times in shell scripts
ci: use a junction on Windows instead of a symlink
ci: inherit --jobs via MAKEFLAGS in run-build-and-tests
ci/lib.sh: encapsulate Travis-specific things
...
|
|
Add sha-256 hash and plug it through the code to allow building Git
with the "NewHash".
* bc/sha-256:
hash: add an SHA-256 implementation using OpenSSL
sha256: add an SHA-256 implementation using libgcrypt
Add a base implementation of SHA-256 support
commit-graph: convert to using the_hash_algo
t/helper: add a test helper to compute hash speed
sha1-file: add a constant for hash block size
t: make the sha1 test-tool helper generic
t: add basic tests for our SHA-1 implementation
cache: make hashcmp and hasheq work with larger hashes
hex: introduce functions to print arbitrary hashes
sha1-file: provide functions to look up hash algorithms
sha1-file: rename algorithm to "sha1"
|
|
This will come in handy when publishing the results of Git's test suite
during an automated Azure DevOps run.
Note: we need to make extra sure that invalid UTF-8 encoding is turned
into valid UTF-8 (using the Replacement Character, \uFFFD) because
t9902's trace contains such invalid byte sequences, and the task in the
Azure Pipeline that uploads the test results would refuse to do anything
if it was asked to parse an .xml file with invalid UTF-8 in it.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
SHA-1 is weak and we need to transition to a new hash function. For
some time, we have referred to this new function as NewHash. Recently,
we decided to pick SHA-256 as NewHash. The reasons behind the choice of
SHA-256 are outlined in the thread starting at [1] and in the commit
history for the hash function transition document.
Add a basic implementation of SHA-256 based off libtomcrypt, which is in
the public domain. Optimize it and restructure it to meet our coding
standards. Pull in the update and final functions from the SHA-1 block
implementation, as we know these function correctly with all compilers.
This implementation is slower than SHA-1, but more performant
implementations will be introduced in future commits.
Wire up SHA-256 in the list of hash algorithms, and add a test that the
algorithm works correctly.
Note that with this patch, it is still not possible to switch to using
SHA-256 in Git. Additional patches are needed to prepare the code to
handle a larger hash algorithm and further test fixes are needed.
[1] https://public-inbox.org/git/20180609224913.GC38834@genre.crustytoothpaste.net/
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add a utility (which is less for the testsuite and more for developers)
that can compute hash speeds for whatever hash algorithms are
implemented. This allows developers to test their personal systems to
determine the performance characteristics of various algorithms.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The submodule support has been updated to read from the blob at
HEAD:.gitmodules when the .gitmodules file is missing from the
working tree.
* ao/submodule-wo-gitmodules-checked-out:
t/helper: add test-submodule-nested-repo-config
submodule: support reading .gitmodules when it's not in the working tree
submodule: add a helper to check if it is safe to write to .gitmodules
t7506: clean up .gitmodules properly before setting up new scenario
submodule: use the 'submodule--helper config' command
submodule--helper: add a new 'config' subcommand
t7411: be nicer to future tests and really clean things up
t7411: merge tests 5 and 6
submodule: factor out a config_set_in_gitmodules_file_gently function
submodule: add a print_config_from_gitmodules() helper
|
|
Add a test tool to exercise config_from_gitmodules(), in particular for
the case of nested submodules.
Add also a test to document that reading the submoudles config of nested
submodules does not work yet when the .gitmodules file is not in the
working tree but it still in the index.
This is because the git API does not always make it possible access the
object store of an arbitrary repository (see get_oid() usage in
config_from_gitmodules()).
When this git limitation gets fixed the aforementioned use case will be
supported too.
Signed-off-by: Antonio Ospite <ao2@ao2.it>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Before we switched to one big test-tool binary, if you
forgot the name of a tool, you could use tab-completion in
the shell to get a hint. But these days, all you get is:
$ t/helper/test-tool approxidate
fatal: There is no test named 'approxidate'
and you're stuck reading the source code to find it. Let's
print a list of the available tools in this case.
Signed-off-by: Jeff King <peff@peff.net>
Reviewed-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Test helper binaries clean-up.
* nd/test-tool:
Makefile: add a hint about TEST_BUILTINS_OBJS
t/helper: merge test-dump-fsmonitor into test-tool
t/helper: merge test-parse-options into test-tool
t/helper: merge test-pkt-line into test-tool
t/helper: merge test-dump-untracked-cache into test-tool
t/helper: keep test-tool command list sorted
|
|
Further fix for O_APPEND emulation on Windows
* js/mingw-o-append:
mingw: fix mingw_open_append to work with named pipes
t0051: test GIT_TRACE to a windows named pipe
|
|
The code for computing history reachability has been shuffled,
obtained a bunch of new tests to cover them, and then being
improved.
* ds/reachable:
commit-reach: correct accidental #include of C file
commit-reach: use can_all_from_reach
commit-reach: make can_all_from_reach... linear
commit-reach: replace ref_newer logic
test-reach: test commit_contains
test-reach: test can_all_from_reach_with_flags
test-reach: test reduce_heads
test-reach: test get_merge_bases_many
test-reach: test is_descendant_of
test-reach: test in_merge_bases
test-reach: create new test tool for ref_newer
commit-reach: move can_all_from_reach_with_flags
upload-pack: generalize commit date cutoff
upload-pack: refactor ok_to_give_up()
upload-pack: make reachable() more generic
commit-reach: move commit_contains from ref-filter
commit-reach: move ref_newer from remote.c
commit.h: remove method declarations
commit-reach: move walk methods from commit.c
|
|
Create a test-tool helper to create the server side of
a windows named pipe, wait for a client connection, and
copy data written to the pipe to stdout.
Create t0051 test to route GIT_TRACE output of a command
to a named pipe using the above test-tool helper.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* ds/multi-pack-index: (23 commits)
midx: clear midx on repack
packfile: skip loading index if in multi-pack-index
midx: prevent duplicate packfile loads
midx: use midx in approximate_object_count
midx: use existing midx when writing new one
midx: use midx in abbreviation calculations
midx: read objects from multi-pack-index
config: create core.multiPackIndex setting
midx: write object offsets
midx: write object id fanout chunk
midx: write object ids in a chunk
midx: sort and deduplicate objects from packfiles
midx: read pack names into array
multi-pack-index: write pack names in chunk
multi-pack-index: read packfile list
packfile: generalize pack directory list
t5319: expand test data
multi-pack-index: load into memory
midx: write header information to lockfile
multi-pack-index: add 'write' verb
...
|
|
Preparatory code to later add json output for telemetry data.
* jh/json-writer:
json_writer: new routines to create JSON data
|
|
As we prepare to change the behavior of the algorithms in
commit-reach.c, create a new test-tool subcommand 'reach' to test these
methods on interesting commit-graph shapes.
To use the new test-tool, use 'test-tool reach <method>' and provide
input to stdin that describes the inputs to the method. Currently, we
only implement the ref_newer method, which requires two commits. Use
lines "A:<committish>" and "B:<committish>" for the two inputs. We will
expand this input later to accommodate methods that take lists of
commits.
The test t6600-test-reach.sh creates a repo whose commits form a
two-dimensional grid. This grid makes it easy for us to determine
reachability because commit-A-B can reach commit-X-Y if and only if A is
at least X and B is at least Y. This helps create interesting test cases
for each result of the methods in commit-reach.c.
We test all methods in three different states of the commit-graph file:
Non-existent (no generation numbers), fully computed, and mixed (some
commits have generation numbers and others do not).
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Create a new multi_pack_index struct for loading multi-pack-indexes into
memory. Create a test-tool builtin for reading basic information about
that multi-pack-index to verify the correct data is written.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add a struct repository argument to the functions in commit-graph.h that
read the commit graph. (This commit does not affect functions that write
commit graphs.)
Because the commit graph functions can now read the commit graph of any
repository, the global variable core_commit_graph has been removed.
Instead, the config option core.commitGraph is now read on the first
time in a repository that a commit is attempted to be parsed using its
commit graph.
This commit includes a test that exercises the functionality on an
arbitrary repository that is not the_repository.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add "struct json_writer" and a series of jw_ routines to compose JSON
data into a string buffer. The resulting string may then be printed by
commands wanting to support a JSON-like output format.
The json_writer is limited to correctly formatting structured data for
output. It does not attempt to build an object model of the JSON data.
We say "JSON-like" because we do not enforce the Unicode (usually UTF-8)
requirement on string fields. Internally, Git does not necessarily have
Unicode/UTF-8 data for most fields, so it is currently unclear the best
way to enforce that requirement. For example, on Linux pathnames can
contain arbitrary 8-bit character data, so a command like "status" would
not know how to encode the reported pathnames. We may want to revisit
this (or double encode such strings) in the future.
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Helped-by: René Scharfe <l.s.r@web.de>
Helped-by: Wink Saville <wink@saville.com>
Helped-by: Ramsay Jones <ramsay@ramsayjones.plus.com>
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Ramsay Jones <ramsay@ramsayjones.plus.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
Ævar Arnfjörð Bjarmason
Junio C Hamano
Elijah Newren
Derrick Stolee
Jiang Xin
Jeff King
Garima Singh
Josh Steadmon
Heba Waly
Alexandr Miloslavskiy
SZEDER Gábor
Daniel Ferreira
Christian Couder
Johannes Schindelin
Jeff Hostetler
brian m. carlson
Antonio Ospite
Nguyễn Thái Ngọc Duy
Derrick Stolee
Jonathan Tan
Ramsay Jones