summaryrefslogtreecommitdiff
path: root/t/helper/test-read-graph.c
AgeCommit message (Collapse)AuthorFilesLines
2021-01-18commit-graph: implement generation data chunkLibravatar Abhishek Kumar1-0/+4
As discovered by Ævar, we cannot increment graph version to distinguish between generation numbers v1 and v2 [1]. Thus, one of pre-requistes before implementing generation number v2 was to distinguish between graph versions in a backwards compatible manner. We are going to introduce a new chunk called Generation DATa chunk (or GDAT). GDAT will store corrected committer date offsets whereas CDAT will still store topological level. Old Git does not understand GDAT chunk and would ignore it, reading topological levels from CDAT. New Git can parse GDAT and take advantage of newer generation numbers, falling back to topological levels when GDAT chunk is missing (as it would happen with a commit-graph written by old Git). We introduce a test environment variable 'GIT_TEST_COMMIT_GRAPH_NO_GDAT' which forces commit-graph file to be written without generation data chunk to emulate a commit-graph file written by old Git. To minimize the space required to store corrrected commit date, Git stores corrected commit date offsets into the commit-graph file, instea of corrected commit dates. This saves us 4 bytes per commit, decreasing the GDAT chunk size by half, but it's possible for the offset to overflow the 4-bytes allocated for storage. As such overflows are and should be exceedingly rare, we use the following overflow management scheme: We introduce a new commit-graph chunk, Generation Data OVerflow ('GDOV') to store corrected commit dates for commits with offsets greater than GENERATION_NUMBER_V2_OFFSET_MAX. If the offset is greater than GENERATION_NUMBER_V2_OFFSET_MAX, we set the MSB of the offset and the other bits store the position of corrected commit date in GDOV chunk, similar to how Extra Edge List is maintained. We test the overflow-related code with the following repo history: F - N - U / \ U - N - U N \ / N - F - N Where the commits denoted by U have committer date of zero seconds since Unix epoch, the commits denoted by N have committer date of 1112354055 (default committer date for the test suite) seconds since Unix epoch and the commits denoted by F have committer date of (2 ^ 31 - 2) seconds since Unix epoch. The largest offset observed is 2 ^ 31, just large enough to overflow. [1]: https://lore.kernel.org/git/87a7gdspo4.fsf@evledraar.gmail.com/ Signed-off-by: Abhishek Kumar <abhishekkumar8222@gmail.com> Reviewed-by: Taylor Blau <me@ttaylorr.com> Reviewed-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-09-09t/helper/test-read-graph.c: prepare repo settingsLibravatar Taylor Blau1-1/+2
The read-graph test-tool is used by a number of the commit-graph test to assert various properties about a commit-graph. Previously, this program never ran 'prepare_repo_settings()'. There was no need to do so, since none of the commit-graph machinery is affected by the repo settings. In the next patch, the commit-graph machinery's behavior will become dependent on the repo settings, and so loading them before running the rest of the test tool is critical. As such, teach the test tool to call 'prepare_repo_settings()'. Signed-off-by: Taylor Blau <me@ttaylorr.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-05-01Merge branch 'gs/commit-graph-path-filter'Libravatar Junio C Hamano1-0/+4
Introduce an extension to the commit-graph to make it efficient to check for the paths that were modified at each commit using Bloom filters. * gs/commit-graph-path-filter: bloom: ignore renames when computing changed paths commit-graph: add GIT_TEST_COMMIT_GRAPH_CHANGED_PATHS test flag t4216: add end to end tests for git log with Bloom filters revision.c: add trace2 stats around Bloom filter usage revision.c: use Bloom filters to speed up path based revision walks commit-graph: add --changed-paths option to write subcommand commit-graph: reuse existing Bloom filters during write commit-graph: write Bloom filters to commit graph file commit-graph: examine commits by generation number commit-graph: examine changed-path objects in pack order commit-graph: compute Bloom filters for changed paths diff: halt tree-diff early after max_changes bloom.c: core Bloom filter implementation for changed paths. bloom.c: introduce core Bloom filter constructs bloom.c: add the murmur3 hash implementation commit-graph: define and use MAX_NUM_CHUNKS
2020-04-15t/helper/test-read-graph.c: support commit-graph chainsLibravatar Taylor Blau1-12/+1
In 61df89c8e5 (commit-graph: don't early exit(1) on e.g. "git status", 2019-03-25), the former 'load_commit_graph_one' was refactored into 'open_commit_graph' and 'load_commit_graph_one_fd_st' as a means of avoiding an early-exit from non-library code. However, 'load_commit_graph_one' does not support commit-graph chains, and hence the 'read-graph' test tool does not work with them. Replace 'load_commit_graph_one' with 'read_commit_graph_one' in order to support commit-graph chains. In the spirit of 61df89c8e5, 'read_commit_graph_one' does not ever 'die()', making it a suitable replacement here. Signed-off-by: Taylor Blau <me@ttaylorr.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-04-06t4216: add end to end tests for git log with Bloom filtersLibravatar Garima Singh1-0/+4
These tests exercises writing commit graph with Bloom filters and exercises 'git log -- path' with all the applicable options. They check that the output is the same with and without Bloom filters, confirm Bloom filters were used by checking if trace2 statistics were logged correctly. Also confirms cases where Bloom filters are not used: 1. Multiple path specs, 2. --walk-reflogs (see patch titled 'revision.c: use Bloom filters...' for details, 3. If the latest commit graph does not have Bloom filters Signed-off-by: Garima Singh <garima.singh@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-02-04commit-graph.h: use odb in 'load_commit_graph_one_fd_st'Libravatar Taylor Blau1-1/+1
Apply a similar treatment as in the previous patch to pass a 'struct object_directory *' through the 'load_commit_graph_one_fd_st' initializer, too. This prevents a potential bug where a pointer comparison is made to a NULL 'g->odb', which would cause the commit-graph machinery to think that a pair of commit-graphs belonged to different alternates when in fact they do not (i.e., in the case of no '--object-dir'). Signed-off-by: Taylor Blau <me@ttaylorr.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-02-04commit-graph.c: remove path normalization, comparisonLibravatar Taylor Blau1-3/+3
As of the previous patch, all calls to 'commit-graph.c' functions which perform path normalization (for e.g., 'get_commit_graph_filename()') are of the form 'ctx->odb->path', which is always in normalized form. Now that there are no callers passing non-normalized paths to these functions, ensure that future callers are bound by the same restrictions by making these functions take a 'struct object_directory *' instead of a 'const char *'. To match, replace all calls with arguments of the form 'ctx->odb->path' with 'ctx->odb' To recover the path, functions that perform path manipulation simply use 'odb->path'. Further, avoid string comparisons with arguments of the form 'odb->path', and instead prefer raw pointer comparisons, which accomplish the same effect, but are far less brittle. This has a pleasant side-effect of making these functions much more robust to paths that cannot be normalized by 'normalize_path_copy()', i.e., because they are outside of the current working directory. For example, prior to this patch, Valgrind reports that the following uninitialized memory read [1]: $ ( cd t && GIT_DIR=../.git valgrind git rev-parse HEAD^ ) because 'normalize_path_copy()' can't normalize '../.git' (since it's relative to but above of the current working directory) [2]. By using a 'struct object_directory *' directly, 'get_commit_graph_filename()' does not need to normalize, because all paths are relative to the current working directory since they are always read from the '->path' of an object directory. [1]: https://lore.kernel.org/git/20191027042116.GA5801@sigill.intra.peff.net. [2]: The bug here is that 'get_commit_graph_filename()' returns the result of 'normalize_path_copy()' without checking the return value. Signed-off-by: Taylor Blau <me@ttaylorr.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-11-13test-tool: use 'read-graph' helperLibravatar Derrick Stolee1-0/+53
The 'git commit-graph read' subcommand is used in test scripts to check that the commit-graph contents match the expected data. Mostly, this helps check the header information and the list of chunks. Users do not need this information, so move the functionality to a test helper. Reported-by: Bryan Turner <bturner@atlassian.com> Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>