| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The test Makefile knows about a few "lint" checks for common
errors. However, they are not enabled as part of "make test"
by default, which means that many people do not bother
running them. Since they are both quick to run and accurate
(i.e., no false positives), there should be no harm in
turning them on and helping submitters catch errors earlier.
We could just set:
TEST_LINT = test-lint
to enable all tests. But that would be unnecessarily
annoying later on if we add slower or less accurate tests
that should not be part of the default. Instead, we name the
tests individually.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Consistently use a single space before and after the "=" (or ":=", "+=",
etc.) in assignments to make macros. Granted, this was not a big deal,
but I did find the needless inconsistency quite distracting.
Signed-off-by: Stefano Lattarini <stefano.lattarini@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
prove(1) can write a summary of its test results and timings into a
cache file, t/.prove, then use this information during later runs for
various purposes. But deleting t/.prove after every test run defeats
this purpose. So do not delete t/.prove as part of "make
DEFAILT_TEST_TARGET=prove test". (Continue to delete the file on
"make clean".)
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This introduces a performance testing framework under t/perf/. It
tries to be as close to the test-lib.sh infrastructure as possible,
and thus should be easy to get used to for git developers.
The following points were considered for the implementation:
1. You usually want to compare arbitrary revisions/build trees against
each other. They may not have the performance test under
consideration, or even the perf-lib.sh infrastructure.
To cope with this, the 'run' script lets you specify arbitrary
build dirs and revisions. It even automatically builds the revisions
if it doesn't have them at hand yet.
2. Usually you would not want to run all tests. It would take too
long anyway. The 'run' script lets you specify which tests to run;
or you can also do it manually. There is a Makefile for
discoverability and 'make clean', but it is not meant for
real-world use.
3. Creating test repos from scratch in every test is extremely
time-consuming, and shipping or downloading such large/weird repos
is out of the question.
We leave this decision to the user. Two different sizes of test
repos can be configured, and the scripts just copy one or more of
those (using hardlinks for the object store). By default it tries
to use the build tree's git.git repository.
This is fairly fast and versatile. Using a copy instead of a clone
preserves many properties that the user may want to test for, such
as lots of loose objects, unpacked refs, etc.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
I'm no longer running the Git smoke testing service at
smoke.git.nix.is due to Smolder being a fragile piece of software not
having time to follow through on making it easy for third parties to
run and submit their own smoke tests.
So remove the support in Git for sending smoke tests to
smoke.git.nix.is, it's still easy to modify the test suite to submit
smokes somewhere else.
This reverts the following commits:
Revert "t/README: Add SMOKE_{COMMENT,TAGS}= to smoke_report target" -- e38efac87d
Revert "t/README: Document the Smoke testing" -- d15e9ebc5c
Revert "t/Makefile: Create test-results dir for smoke target" -- 617344d77b
Revert "tests: Infrastructure for Git smoke testing" -- b6b84d1b74
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Starting from GNU Make 3.82 $(wildcard ...) no longer sorts the result
(from NEWS):
* WARNING: Backward-incompatibility!
Wildcards were not documented as returning sorted values, but the results
have been sorted up until this release.. If your makefiles require sorted
results from wildcard expansions, use the $(sort ...) function to request
it explicitly.
http://repo.or.cz/w/make.git/commitdiff/2a59dc32aaf0681dec569f32a9d7ab88a379d34f
I usually watch test progress visually, and if tests are sorted, even
with make -j4 they go more or less incrementally by their t number. On
the other side, without sorting, tests are executed in seemingly random
order even for -j1. Let's please maintain sane tests order for perceived
prettyness.
Another note is that in GNU Make sort also works as uniq, so after sort
being removed, we might expect e.g. $(wildcard *.sh a.*) to produce
duplicates for e.g. "a.sh". From this point of view, adding sort could
be seen as hardening t/Makefile from accidentally introduced dups.
It turned out that prevous releases of GNU Make did not perform full
sort in $(wildcard), only sorting results for each pattern, that's why
explicit sort-as-uniq is relevant even for older makes.
Signed-off-by: Kirill Smelkov <kirr@navytux.spb.ru>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The valgrind target just reinvokes make with GIT_TEST_OPTS
set to "--valgrind". However, it does this using an
environment variable, which means GIT_TEST_OPTS in your
config.mak would override it, and "make valgrind" would
simply run the test suite without valgrind on.
Instead, we should pass GIT_TEST_OPTS on the command-line,
overriding what's in config.mak, and take care to append to
whatever the user has there already.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
There are some common but minor errors we tend to make in
writing test scripts:
1. Scripts are left non-executable. This is not usually
noticed immediately because "make test" does not need
the bit, but it is a matter of git policy to make them
executable (and is a slight convenience when running
individual scripts).
2. Two scripts are allocated the same number. Usually this
happens on separate branches, and the problem only
comes about during a merge. But since there is no
textual conflict, the merger would have to be very
observant to notice.
This is also a minor error, but can make GIT_SKIP_TESTS
ambiguous.
This patch introduces a "test-lint" target which checks
both. It is not invoked by default. You can invoke it as
"make test-lint", or you can make it a prerequisite of
running the tests by specifying "TEST_LINT = test-lint" in
your config.mak or on the command line.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* mg/make-prove:
test: allow running the tests under "prove"
|
|
You can run "make DEFAULT_TEST_TARGET=prove test" to run the test under
"prove" (or $(PROVE) if set). The output is a bit easier to read when
running many tests in parallel.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Liked-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Liked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The 'test-installed' target in gitweb/Makefile tests installed gitweb,
using the same destination directory that 'install' target uses.
The 'test' target is just a convenience wrapper invoking 'gitweb-test'
target of t/Makefile.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Some tests in t96xx series (cvsimport) want to write into the control area
(CVSROOT) of their test CVS repositories, but this does not work well when
the source area is made read-only (test trash directories are moved via
--root=else/where option).
Copy the supplied test CVS repository to a scratch place at the beginning
of these tests.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Change the smoke target to create a test-results directory. This was
done implicitly by the test-lib before my "test-lib: Don't write
test-results when HARNESS_ACTIVE" patch, but after that smoking from
the pu branch hasn't worked.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The smoke server supports a free form text field with comments about a
report, and a comma delimited list of tags. Change the smoke_report
target to expose this functionality. Now smokers can send more data
that explains and categorizes the reports they're submitting.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Change the smoke testing portion of t/Makefile not to include
GIT-BUILD-OPTIONS. It's a shellscript, not a Makefile snippet, so it
had the nasty side-effect of sneaking e.g. SHELL_PATH = '/bin/sh'
(with quotes) everywhere.
Just add our own PERL_PATH variable as a workaround. The t/Makefile
already has e.g. an equivalent SHELL_PATH and TAR option which
duplicate the definitions in GIT-BUILD-OPTIONS.
Reported-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add the capability to send smoke reports from the Git test suite.
Currently we only notice bugs in the test suite when it's run
manually. Bugs in Git that only occur on obscure platforms or setups
that the core developers aren't using can thus go unnoticed.
This series aims to change that. With it, anyone that's interested in
avoiding bitrot in Git can volunteer to run a smoke tester. A smoke
tester periodically compiles the latest version of Git, runs the test
suite, and submits a report to a central server indicating how the
test run went.
A smoke tester might run something like this in cron:
#!/bin/sh
cd ~/g/git
git fetch
for branch in maint master next pu; do
git checkout origin/$i &&
make clean all &&
cd t &&
make smoke_report
done
The smoker might want to compile git with non-default flags, include
bisecting functionality or run the tests under valgrind. Doing that is
outside the scope of this patch, this just adds a report submission
mechanism. But including a canonical smoke runner is something we'll
want to include eventually.
What this does now is add smoke and smoke_report targets to t/Makefile
(this example only uses a few tests for demonstration):
$ make clean smoke
rm -f -r 'trash directory'.* test-results
rm -f t????/cvsroot/CVSROOT/?*
rm -f -r valgrind/bin
rm -f .prove
perl ./harness --git-version="1.7.2.1.173.gc9b40" \
--no-verbose \
--archive="test-results/git-smoke.tar.gz" \
t0000-basic.sh t0001-init.sh t0002-gitfile.sh t0003-attributes.sh t0004-unwritable.sh t0005-signals.sh t0006-date.sh
t0000-basic.sh ....... ok
t0001-init.sh ........ ok
t0002-gitfile.sh ..... ok
t0003-attributes.sh .. ok
t0004-unwritable.sh .. ok
t0005-signals.sh ..... ok
t0006-date.sh ........ ok
All tests successful.
Test Summary Report
-------------------
t0000-basic.sh (Wstat: 0 Tests: 46 Failed: 0)
TODO passed: 5
Files=7, Tests=134, 3 wallclock secs ( 0.06 usr 0.05 sys + 0.23 cusr 1.33 csys = 1.67 CPU)
Result: PASS
TAP Archive created at /home/avar/g/git/t/test-results/git-smoke.tar.gz
The smoke target uses TAP::Harness::Archive to aggregate the test
results into a tarball. The tarball contains two things, the output of
every test file that was run, and a metadata file:
Tarball contents:
$ tar xzvf git-smoke.tar.gz
t0004-unwritable.sh
t0001-init.sh
t0002-gitfile.sh
t0005-signals.sh
t0000-basic.sh
t0003-attributes.sh
t0006-date.sh
meta.yml
A test report:
$ cat t0005-signals.sh
ok 1 - sigchain works
# passed all 1 test(s)
1..1
A metadata file:
---
extra_properties:
file_attributes:
-
description: t0000-basic.sh
end_time: 1280437324.61398
start_time: 1280437324.22186
-
description: t0001-init.sh
end_time: 1280437325.12346
start_time: 1280437324.62393
-
description: t0002-gitfile.sh
end_time: 1280437325.29428
start_time: 1280437325.13646
-
description: t0003-attributes.sh
end_time: 1280437325.59678
start_time: 1280437325.30565
-
description: t0004-unwritable.sh
end_time: 1280437325.77376
start_time: 1280437325.61003
-
description: t0005-signals.sh
end_time: 1280437325.85426
start_time: 1280437325.78727
-
description: t0006-date.sh
end_time: 1280437326.2362
start_time: 1280437325.86768
file_order:
- t0000-basic.sh
- t0001-init.sh
- t0002-gitfile.sh
- t0003-attributes.sh
- t0004-unwritable.sh
- t0005-signals.sh
- t0006-date.sh
start_time: 1280437324
stop_time: 1280437326
The "extra_properties" hash is where we'll stick Git-specific info,
like whether Git was compiled with gettext or the fallback regex
engine, and what branch we're compiling. Currently no metadata like
this is included.
The entire tarball is then submitted to a central smokebox at
smoke.git.nix.is. This is done with curl(1) via the "smoke_report"
target:
$ make smoke_report
curl \
-H "Expect: " \
-F project=Git \
-F architecture=x86_64 \
-F platform=Linux \
-F revision="1.7.2.1.173.gc9b40" \
-F report_file=@test-results/git-smoke.tar.gz \
http://smoke.git.nix.is/app/projects/process_add_report/1 \
| grep -v ^Redirecting
% Total % Received % Xferd Average Speed Time Time Time Current
Dload Upload Total Spent Left Speed
100 117k 100 63 100 117k 3 6430 0:00:21 0:00:18 0:00:03 0
Reported #8 added.
Reports are then made available on the smokebox via a web interface:
http://smoke.git.nix.is/app/projects/smoke_reports/1
The smoke reports are also mirrored to a Git repository hosted on
GitHub:
http://github.com/gitsmoke/smoke-reports
The Smolder SQLite database that contains metadata about the reports
is also made available:
http://github.com/gitsmoke/smoke-database
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We document how to run prove with the --state option in t/README. This
produces a .prove YAML file in the current directory. Change the t/
gitignore to ignore it, and clean it up on `make clean'.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The current make target 'aggregate-results' scanned all files matching
test-results/t*-*. Normally these are only the test counts (and the
exit values, which are ignored), but with --tee the suite also dumps
all output. Furthermore, with --verbose t1450 contains several lines
starting with "broken link from ..." which matches the criteria used
by aggregate-results.sh.
Rename the counts output files to *.counts, and only scan those.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Acked-by: Sverre Rabbelier <srabbelier@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* gv/portable:
test-lib: use DIFF definition from GIT-BUILD-OPTIONS
build: propagate $DIFF to scripts
Makefile: Tru64 portability fix
Makefile: HP-UX 10.20 portability fixes
Makefile: HPUX11 portability fixes
Makefile: SunOS 5.6 portability fix
inline declaration does not work on AIX
Allow disabling "inline"
Some platforms lack socklen_t type
Make NO_{INET_NTOP,INET_PTON} configured independently
Makefile: some platforms do not have hstrerror anywhere
git-compat-util.h: some platforms with mmap() lack MAP_FAILED definition
test_cmp: do not use "diff -u" on platforms that lack one
fixup: do not unconditionally disable "diff -u"
tests: use "test_cmp", not "diff", when verifying the result
Do not use "diff" found on PATH while building and installing
enums: omit trailing comma for portability
Makefile: -lpthread may still be necessary when libc has only pthread stubs
Rewrite dynamic structure initializations to runtime assignment
Makefile: pass CPPFLAGS through to fllow customization
Conflicts:
Makefile
wt-status.h
|
|
IRIX 6.5 has a default maximum argument list length of 20480. The file
glob that is passed to aggregate-results currently exceeds this length, and
so the script cannot run successfully. Work around this issue by passing
the file names in via the standard input rather than the argument list.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
By default the testsuite calls 'diff -u' whenever a file comparison is
called for. Unfortunately that throws a "diff: unknown option '-u'"
error for most non-GNU diffs.
This patch sets GIT_TEST_CMP to 'cmp' on all the architectures where
that happens. The previous version of this patch forgot to export
GIT_TEST_CMP from t/Makefile, which is why 'make test' continued to
fail most tests on most architectures - test-lib.sh was falling back
on its default of `diff -u' for GIT_TEST_CMP. This version of this
patch shows a vast improvement in testsuite results where either GNU
diff is in the path at configure time, or where Makefile knows that
GIT_TEST_CMP=cmp is required.
Signed-off-by: Gary V. Vaughan <gary@thewrittenword.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In tests, call test_cmp rather than raw diff where possible (i.e. if
the output does not go to a pipe), to allow the use of, say, 'cmp'
when the default 'diff -u' is not compatible with a vendor diff.
When that is not possible, use $DIFF, as set in GIT-BUILD-OPTIONS.
Signed-off-by: Gary V. Vaughan <gary@thewrittenword.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This is useful if you want to specify GIT_TEST_OPTS that you
always use.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* maint:
test-lib: Clean up comments and Makefile.
diff --no-index: Do not generate patch output if other output is requested
|
|
Bring documentation in test-lib and clean target
in Makefile in-line with abc5d372.
Signed-off-by: Emil Sit <sit@emilsit.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
It does not make much sense to run the (expensive) valgrind tests and
not look at the output.
To prevent output from scrolling out of reach, the parameter --tee is
implied, too.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
It is easy to forget running valgrinded tests without -v, and it is
also easy to forget to redirect the output to "tee" (lest the output
scroll out of the terminal's buffer). Running "make valgrind" will
take care of all that.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
On multiprocessor machines, or with I/O heavy tests (that leave the
CPU waiting a lot), it makes sense to parallelize the tests.
However, care has to be taken that the different jobs use different
trash directories.
This commit does so, by creating the trash directories with a suffix
that is unique with regard to the test, as it is the test's base name.
Further, the trash directory is removed in the test itself if
everything went fine, so that the trash directories do not
pile up only to be removed at the very end.
If a test failed, the trash directory is not removed. Chances are
that the exact error message is lost in the clutter, but you can still
see what test failed from the name of the trash directory, and repeat
the test (without -j).
If all was good, you will see the aggregated results.
Suggestions to simplify this commit came from Junio and René.
There still is an issue with tests that want to run a server process and
listen to a fixed port (http and svn) --- they cannot run in parallel but
this patch does not address this issue.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The Makefile targets 'aggregate-results' and 'clean' pretended to be
independent. This is not true, of course, since aggregate-results
needs the results _before_ they are removed.
Likewise, the tests should have been run already when the results are
to be aggregated.
However, as it is legitimate to run only a few tests, and then aggregate
just those results, so another target is introduced, that depends on all
tests, then aggregates the results, and only then removes the results.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: SungHyun Nam <goweol@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This patch makes 'make' output the aggregated results at the end of each build.
The 'git-test-result' file is removed both before and after each build.
Signed-off-by: Sverre Rabbelier <srabbelier@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This change is needed order to aggregate data on the test run later on.
Signed-off-by: Sverre Rabbelier <srabbelier@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Brandon Casey <drafnel@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Emil Medve <Emilian.Medve@Freescale.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This uses "git-apply --whitespace=strip" to fix whitespace errors that have
crept in to our source files over time. There are a few files that need
to have trailing whitespaces (most notably, test vectors). The results
still passes the test, and build result in Documentation/ area is unchanged.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We have less code to worry about now. As a bonus, --revision
can be used to reliably skip parts of history whenever fetch is
run, not just the first time. I'm not sure why anybody would
want to skip history in the middle, however...
For people (nearly everyone at the moment) without the
do_switch() function in their Perl SVN library, the entire tree
must be refetched if --follow-parent is used and a parent is
found. Future versions of SVN will have a working do_switch()
function accessible via Perl.
Accessing repositories on the local machine (especially file://
ones) is also slightly slower as a result; but I suspect most
git-svn users will be using it to access remote repositories.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Using the command-line client was great for prototyping and
getting something working quickly. Eventually I found time
to study the library documentation and add support for using
the libraries which are much faster and more flexible when
it comes to supporting new features.
Note that we require version 1.1 of the SVN libraries, whereas
we supported the command-line svn client down to version 1.0.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
* Enable test for delta transfers in full-svn-test.
* Run tests against the root of the repository so we won't have
to revisit 308906fa6e98132cab839a4f42701386fba368ef and
efe4631def181d32f932672a7ea31e52ee0ab308 again.
The graft-branches test still runs as before.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
This frees the Porcelain-ish that comes with the core Python-free.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Allow NO_SVN_TESTS to be defined to skip git-svn tests. These
tests are time-consuming due to SVN being slow, and even more so
if SVN Perl libraries are not available.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
When setting a config variable, git_config_set() ignored the variables
GIT_CONFIG and GIT_CONFIG_LOCAL. Now, when GIT_CONFIG_LOCAL is set, it
will write to that file. If not, GIT_CONFIG is checked, and only as a
fallback, the change is written to $GIT_DIR/config.
Add a test for it, and also future-proof the test for the upcoming
$HOME/.gitconfig support.
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Signed-off-by: A Large Angry SCM <gitzilla@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Some versions of GNU make do not understand $(call), and have problems to
interpret rules like this:
some_target: CFLAGS += -Dsome=defs
[jc: simplified substitution a bit. ]
Signed-off-by: Johannes E. Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
In some setups (notably server setups) you do not need that dependency.
Gracefully handle the absence of python when NO_PYTHON is defined.
Signed-off-by: Johannes E. Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Allow failed tests to be ignored using make's "-i". The patch also
disables parallel make in t/. This doesn't make the testing any
different as before: the tests were run sequentially before.
It also allows to run more tests, ignoring the ones usually failing
just to figure out if something else broke. (Or to ignore plainly
uninteresting situations because of the testing being done on say...
cygwin ;)
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
... using HPA's shellquote macro.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
- The location of openssl development files got customizable.
- The location of iconv development files got customizable.
- Pass $TAR down to t5000 test so that the user can override with
'gmake TAR=gtar'.
- Solaris 'bc' does not seem to grok "define abs()". There is no
reason to use bc there -- expr would do.
Signed-off-by: Junio C Hamano <junio@twinsun.com>
|
Jeff King
Stefano Lattarini
Michael Haggerty
Thomas Rast
Junio C Hamano
Ævar Arnfjörð Bjarmason
Kirill Smelkov
Michael J Gruber
Jakub Narebski
Brandon Casey
Gary V. Vaughan
Emil Sit
Johannes Schindelin
SungHyun Nam
Sverre Rabbelier
Emil Medve
Eric Wong
Junio C Hamano
A Large Angry SCM
Alex Riesen
Junio C Hamano