summaryrefslogtreecommitdiff
path: root/submodule-config.c
AgeCommit message (Collapse)AuthorFilesLines
2018-11-13Merge branch 'ao/submodule-wo-gitmodules-checked-out'Libravatar Junio C Hamano1-2/+66
The submodule support has been updated to read from the blob at HEAD:.gitmodules when the .gitmodules file is missing from the working tree. * ao/submodule-wo-gitmodules-checked-out: t/helper: add test-submodule-nested-repo-config submodule: support reading .gitmodules when it's not in the working tree submodule: add a helper to check if it is safe to write to .gitmodules t7506: clean up .gitmodules properly before setting up new scenario submodule: use the 'submodule--helper config' command submodule--helper: add a new 'config' subcommand t7411: be nicer to future tests and really clean things up t7411: merge tests 5 and 6 submodule: factor out a config_set_in_gitmodules_file_gently function submodule: add a print_config_from_gitmodules() helper
2018-10-31submodule: support reading .gitmodules when it's not in the working treeLibravatar Antonio Ospite1-2/+29
When the .gitmodules file is not available in the working tree, try using the content from the index and from the current branch. This covers the case when the file is part of the repository but for some reason it is not checked out, for example because of a sparse checkout. This makes it possible to use at least the 'git submodule' commands which *read* the gitmodules configuration file without fully populating the working tree. Writing to .gitmodules will still require that the file is checked out, so check for that before calling config_set_in_gitmodules_file_gently. Add a similar check also in git-submodule.sh::cmd_add() to anticipate the eventual failure of the "git submodule add" command when .gitmodules is not safely writeable; this prevents the command from leaving the repository in a spurious state (e.g. the submodule repository was cloned but .gitmodules was not updated because config_set_in_gitmodules_file_gently failed). Moreover, since config_from_gitmodules() now accesses the global object store, it is necessary to protect all code paths which call the function against concurrent access to the global object store. Currently this only happens in builtin/grep.c::grep_submodules(), so call grep_read_lock() before invoking code involving config_from_gitmodules(). Finally, add t7418-submodule-sparse-gitmodules.sh to verify that reading from .gitmodules succeeds and that writing to it fails when the file is not checked out. NOTE: there is one rare case where this new feature does not work properly yet: nested submodules without .gitmodules in their working tree. This has been documented with a warning and a test_expect_failure item in t7814, and in this case the current behavior is not altered: no config is read. Signed-off-by: Antonio Ospite <ao2@ao2.it> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-10-09submodule: factor out a config_set_in_gitmodules_file_gently functionLibravatar Antonio Ospite1-0/+12
Introduce a new config_set_in_gitmodules_file_gently() function to write config values to the .gitmodules file. This is in preparation for a future change which will use the function to write to the .gitmodules file in a more controlled way instead of using "git config -f .gitmodules". The purpose of the change is mainly to centralize the code that writes to the .gitmodules file to avoid some duplication. The naming follows git_config_set_in_file_gently() but the git_ prefix is removed to communicate that this is not a generic git-config API. Signed-off-by: Antonio Ospite <ao2@ao2.it> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-10-09submodule: add a print_config_from_gitmodules() helperLibravatar Antonio Ospite1-0/+25
Add a new print_config_from_gitmodules() helper function to print values from .gitmodules just like "git config -f .gitmodules" would. This will be used by a new submodule--helper subcommand to be able to access the .gitmodules file in a more controlled way. Signed-off-by: Antonio Ospite <ao2@ao2.it> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-09-27Sync with 2.19.1Libravatar Junio C Hamano1-0/+10
* maint: Git 2.19.1 Git 2.18.1 Git 2.17.2 fsck: detect submodule paths starting with dash fsck: detect submodule urls starting with dash Git 2.16.5 Git 2.15.3 Git 2.14.5 submodule-config: ban submodule paths that start with a dash submodule-config: ban submodule urls that start with dash submodule--helper: use "--" to signal end of clone options
2018-09-27Sync with 2.18.1Libravatar Junio C Hamano1-0/+10
* maint-2.18: Git 2.18.1 Git 2.17.2 fsck: detect submodule paths starting with dash fsck: detect submodule urls starting with dash Git 2.16.5 Git 2.15.3 Git 2.14.5 submodule-config: ban submodule paths that start with a dash submodule-config: ban submodule urls that start with dash submodule--helper: use "--" to signal end of clone options
2018-09-27Sync with 2.17.2Libravatar Junio C Hamano1-0/+10
* maint-2.17: Git 2.17.2 fsck: detect submodule paths starting with dash fsck: detect submodule urls starting with dash Git 2.16.5 Git 2.15.3 Git 2.14.5 submodule-config: ban submodule paths that start with a dash submodule-config: ban submodule urls that start with dash submodule--helper: use "--" to signal end of clone options
2018-09-27Sync with 2.15.3Libravatar Junio C Hamano1-0/+10
* maint-2.15: Git 2.15.3 Git 2.14.5 submodule-config: ban submodule paths that start with a dash submodule-config: ban submodule urls that start with dash submodule--helper: use "--" to signal end of clone options
2018-09-27Sync with Git 2.14.4Libravatar Junio C Hamano1-0/+10
* maint-2.14: Git 2.14.5 submodule-config: ban submodule paths that start with a dash submodule-config: ban submodule urls that start with dash submodule--helper: use "--" to signal end of clone options
2018-09-27submodule-config: ban submodule paths that start with a dashLibravatar Jeff King1-0/+2
We recently banned submodule urls that look like command-line options. This is the matching change to ban leading-dash paths. As with the urls, this should not break any use cases that currently work. Even with our "--" separator passed to git-clone, git-submodule.sh gets confused. Without the code portion of this patch, the clone of "-sub" added in t7417 would yield results like: /path/to/git-submodule: 410: cd: Illegal option -s /path/to/git-submodule: 417: cd: Illegal option -s /path/to/git-submodule: 410: cd: Illegal option -s /path/to/git-submodule: 417: cd: Illegal option -s Fetched in submodule path '-sub', but it did not contain b56243f8f4eb91b2f1f8109452e659f14dd3fbe4. Direct fetching of that commit failed. Moreover, naively adding such a submodule doesn't work: $ git submodule add $url -sub The following path is ignored by one of your .gitignore files: -sub even though there is no such ignore pattern (the test script hacks around this with a well-placed "git mv"). Unlike leading-dash urls, though, it's possible that such a path _could_ be useful if we eventually made it work. So this commit should be seen not as recommending a particular policy, but rather temporarily closing off a broken and possibly dangerous code-path. We may revisit this decision later. There are two minor differences to the tests in t7416 (that covered urls): 1. We don't have a "./-sub" escape hatch to make this work, since the submodule code expects to be able to match canonical index names to the path field (so you are free to add submodule config with that path, but we would never actually use it, since an index entry would never start with "./"). 2. After this patch, cloning actually succeeds. Since we ignore the submodule.*.path value, we fail to find a config stanza for our submodule at all, and simply treat it as inactive. We still check for the "ignoring" message. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-09-27submodule-config: ban submodule urls that start with dashLibravatar Jeff King1-0/+8
The previous commit taught the submodule code to invoke our "git clone $url $path" with a "--" separator so that we aren't confused by urls or paths that start with dashes. However, that's just one code path. It's not clear if there are others, and it would be an easy mistake to add one in the future. Moreover, even with the fix in the previous commit, it's quite hard to actually do anything useful with such an entry. Any url starting with a dash must fall into one of three categories: - it's meant as a file url, like "-path". But then any clone is not going to have the matching path, since it's by definition relative inside the newly created clone. If you spell it as "./-path", the submodule code sees the "/" and translates this to an absolute path, so it at least works (assuming the receiver has the same filesystem layout as you). But that trick does not apply for a bare "-path". - it's meant as an ssh url, like "-host:path". But this already doesn't work, as we explicitly disallow ssh hostnames that begin with a dash (to avoid option injection against ssh). - it's a remote-helper scheme, like "-scheme::data". This _could_ work if the receiver bends over backwards and creates a funny-named helper like "git-remote--scheme". But normally there would not be any helper that matches. Since such a url does not work today and is not likely to do anything useful in the future, let's simply disallow them entirely. That protects the existing "git clone" path (in a belt-and-suspenders way), along with any others that might exist. Our tests cover two cases: 1. A file url with "./" continues to work, showing that there's an escape hatch for people with truly silly repo names. 2. A url starting with "-" is rejected. Note that we expect case (2) to fail, but it would have done so even without this commit, for the reasons given above. So instead of just expecting failure, let's also check for the magic word "ignoring" on stderr. That lets us know that we failed for the right reason. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-08-29convert "oidcmp() != 0" to "!oideq()"Libravatar Jeff King1-2/+2
This is the flip side of the previous two patches: checking for a non-zero oidcmp() can be more strictly expressed as inequality. Like those patches, we write "!= 0" in the coccinelle transformation, which covers by isomorphism the more common: if (oidcmp(E1, E2)) As with the previous two patches, this patch can be achieved almost entirely by running "make coccicheck"; the only differences are manual line-wrap fixes to match the original code. There is one thing to note for anybody replicating this, though: coccinelle 1.0.4 seems to miss the case in builtin/tag.c, even though it's basically the same as all the others. Running with 1.0.7 does catch this, so presumably it's just a coccinelle bug that was fixed in the interim. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-08-02Merge branch 'jk/fsck-gitmodules-gently'Libravatar Junio C Hamano1-1/+1
Recent "security fix" to pay attention to contents of ".gitmodules" while accepting "git push" was a bit overly strict than necessary, which has been adjusted. * jk/fsck-gitmodules-gently: fsck: downgrade gitmodulesParse default to "info" fsck: split ".gitmodules too large" error from parse failure fsck: silence stderr when parsing .gitmodules config: add options parameter to git_config_from_mem config: add CONFIG_ERROR_SILENT handler config: turn die_on_error into caller-facing enum
2018-07-18Merge branch 'ao/config-from-gitmodules'Libravatar Junio C Hamano1-12/+63
Tighten the API to make it harder to misuse in-tree .gitmodules file, even though it shares the same syntax with configuration files, to read random configuration items from it. * ao/config-from-gitmodules: submodule-config: reuse config_from_gitmodules in repo_read_gitmodules submodule-config: pass repository as argument to config_from_gitmodules submodule-config: make 'config_from_gitmodules' private submodule-config: add helper to get 'update-clone' config from .gitmodules submodule-config: add helper function to get 'fetch' config from .gitmodules config: move config_from_gitmodules to submodule-config.c
2018-07-18Merge branch 'sb/object-store-grafts'Libravatar Junio C Hamano1-0/+1
The conversion to pass "the_repository" and then "a_repository" throughout the object access API continues. * sb/object-store-grafts: commit: allow lookup_commit_graft to handle arbitrary repositories commit: allow prepare_commit_graft to handle arbitrary repositories shallow: migrate shallow information into the object parser path.c: migrate global git_path_* to take a repository argument cache: convert get_graft_file to handle arbitrary repositories commit: convert read_graft_file to handle arbitrary repositories commit: convert register_commit_graft to handle arbitrary repositories commit: convert commit_graft_pos() to handle arbitrary repositories shallow: add repository argument to is_repository_shallow shallow: add repository argument to check_shallow_file_for_update shallow: add repository argument to register_shallow shallow: add repository argument to set_alternate_shallow_file commit: add repository argument to lookup_commit_graft commit: add repository argument to prepare_commit_graft commit: add repository argument to read_graft_file commit: add repository argument to register_commit_graft commit: add repository argument to commit_graft_pos object: move grafts to object parser object-store: move object access functions to object-store.h
2018-07-03config: add options parameter to git_config_from_memLibravatar Jeff King1-1/+1
The underlying config parser knows how to handle a config_options struct, but git_config_from_mem() always passes NULL. Let's allow our callers to specify the options struct. We could add a "_with_options" variant, but since there are only a handful of callers, let's just update them to pass NULL. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-06-26submodule-config: reuse config_from_gitmodules in repo_read_gitmodulesLibravatar Antonio Ospite1-29/+21
Reuse config_from_gitmodules in repo_read_gitmodules to remove some duplication and also have a single point where the .gitmodules file is read. The change does not introduce any new behavior, the same gitmodules_cb config callback is still used, which only deals with configuration specific to submodules. The check about the repo's worktree is removed from repo_read_gitmodules because it's already performed in config_from_gitmodules. The config_from_gitmodules function is moved up in the file —unchanged— before its users to avoid a forward declaration. Signed-off-by: Antonio Ospite <ao2@ao2.it> Acked-by: Brandon Williams <bmwill@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-06-26submodule-config: pass repository as argument to config_from_gitmodulesLibravatar Antonio Ospite1-5/+5
Generalize config_from_gitmodules() to accept a repository as an argument. This is in preparation to reuse the function in repo_read_gitmodules in order to have a single point where the '.gitmodules' file is accessed. Signed-off-by: Antonio Ospite <ao2@ao2.it> Acked-by: Brandon Williams <bmwill@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-06-26submodule-config: make 'config_from_gitmodules' privateLibravatar Antonio Ospite1-4/+4
Now that 'config_from_gitmodules' is not used in the open, it can be marked as private. Hopefully this will prevent its usage for retrieving arbitrary configuration form the '.gitmodules' file. Signed-off-by: Antonio Ospite <ao2@ao2.it> Acked-by: Brandon Williams <bmwill@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-06-26submodule-config: add helper to get 'update-clone' config from .gitmodulesLibravatar Antonio Ospite1-0/+14
Add a helper function to make it clearer that retrieving 'update-clone' configuration from the .gitmodules file is a special case supported solely for backward compatibility purposes. This change removes one direct use of 'config_from_gitmodules' for options not strictly related to submodules: "submodule.fetchjobs" does not describe a property of a submodule, but a behavior of other commands when dealing with submodules, so it does not really belong to the .gitmodules file. This is in the effort to communicate better that .gitmodules is not to be used as a mechanism to store arbitrary configuration in the repository that any command can retrieve. Signed-off-by: Antonio Ospite <ao2@ao2.it> Acked-by: Brandon Williams <bmwill@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-06-26submodule-config: add helper function to get 'fetch' config from .gitmodulesLibravatar Antonio Ospite1-0/+28
Add a helper function to make it clearer that retrieving 'fetch' configuration from the .gitmodules file is a special case supported solely for backward compatibility purposes. This change removes one direct use of 'config_from_gitmodules' in code not strictly related to submodules, in the effort to communicate better that .gitmodules is not to be used as a mechanism to store arbitrary configuration in the repository that any command can retrieve. Signed-off-by: Antonio Ospite <ao2@ao2.it> Acked-by: Brandon Williams <bmwill@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-06-26config: move config_from_gitmodules to submodule-config.cLibravatar Antonio Ospite1-0/+17
The .gitmodules file is not meant as a place to store arbitrary configuration to distribute with the repository. Move config_from_gitmodules() out of config.c and into submodule-config.c to make it even clearer that it is not a mechanism to retrieve arbitrary configuration from the .gitmodules file. Signed-off-by: Antonio Ospite <ao2@ao2.it> Acked-by: Brandon Williams <bmwill@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-05-30Merge branch 'bc/object-id'Libravatar Junio C Hamano1-33/+33
Conversion from uchar[20] to struct object_id continues. * bc/object-id: (42 commits) merge-one-file: compute empty blob object ID add--interactive: compute the empty tree value Update shell scripts to compute empty tree object ID sha1_file: only expose empty object constants through git_hash_algo dir: use the_hash_algo for empty blob object ID sequencer: use the_hash_algo for empty tree object ID cache-tree: use is_empty_tree_oid sha1_file: convert cached object code to struct object_id builtin/reset: convert use of EMPTY_TREE_SHA1_BIN builtin/receive-pack: convert one use of EMPTY_TREE_SHA1_HEX wt-status: convert two uses of EMPTY_TREE_SHA1_HEX submodule: convert several uses of EMPTY_TREE_SHA1_HEX sequencer: convert one use of EMPTY_TREE_SHA1_HEX merge: convert empty tree constant to the_hash_algo builtin/merge: switch tree functions to use object_id builtin/am: convert uses of EMPTY_TREE_SHA1_BIN to the_hash_algo sha1-file: add functions for hex empty tree and blob OIDs builtin/receive-pack: avoid hard-coded constants for push certs diff: specify abbreviation size in terms of the_hash_algo upload-pack: replace use of several hard-coded constants ...
2018-05-29Sync with Git 2.17.1Libravatar Junio C Hamano1-0/+31
* maint: (25 commits) Git 2.17.1 Git 2.16.4 Git 2.15.2 Git 2.14.4 Git 2.13.7 fsck: complain when .gitmodules is a symlink index-pack: check .gitmodules files with --strict unpack-objects: call fsck_finish() after fscking objects fsck: call fsck_finish() after fscking objects fsck: check .gitmodules content fsck: handle promisor objects in .gitmodules check fsck: detect gitmodules files fsck: actually fsck blob data fsck: simplify ".git" check index-pack: make fsck error message more specific verify_path: disallow symlinks in .gitmodules update-index: stat updated files earlier verify_dotfile: mention case-insensitivity in comment verify_path: drop clever fallthrough skip_prefix: add case-insensitive variant ...
2018-05-22Sync with Git 2.15.2Libravatar Junio C Hamano1-0/+31
* maint-2.15: Git 2.15.2 Git 2.14.4 Git 2.13.7 verify_path: disallow symlinks in .gitmodules update-index: stat updated files earlier verify_dotfile: mention case-insensitivity in comment verify_path: drop clever fallthrough skip_prefix: add case-insensitive variant is_{hfs,ntfs}_dotgitmodules: add tests is_ntfs_dotgit: match other .git files is_hfs_dotgit: match other .git files is_ntfs_dotgit: use a size_t for traversing string submodule-config: verify submodule names as paths
2018-05-22Sync with Git 2.14.4Libravatar Junio C Hamano1-0/+31
* maint-2.14: Git 2.14.4 Git 2.13.7 verify_path: disallow symlinks in .gitmodules update-index: stat updated files earlier verify_dotfile: mention case-insensitivity in comment verify_path: drop clever fallthrough skip_prefix: add case-insensitive variant is_{hfs,ntfs}_dotgitmodules: add tests is_ntfs_dotgit: match other .git files is_hfs_dotgit: match other .git files is_ntfs_dotgit: use a size_t for traversing string submodule-config: verify submodule names as paths
2018-05-22Sync with Git 2.13.7Libravatar Junio C Hamano1-0/+31
* maint-2.13: Git 2.13.7 verify_path: disallow symlinks in .gitmodules update-index: stat updated files earlier verify_dotfile: mention case-insensitivity in comment verify_path: drop clever fallthrough skip_prefix: add case-insensitive variant is_{hfs,ntfs}_dotgitmodules: add tests is_ntfs_dotgit: match other .git files is_hfs_dotgit: match other .git files is_ntfs_dotgit: use a size_t for traversing string submodule-config: verify submodule names as paths
2018-05-21submodule-config: verify submodule names as pathsLibravatar Jeff King1-0/+31
Submodule "names" come from the untrusted .gitmodules file, but we blindly append them to $GIT_DIR/modules to create our on-disk repo paths. This means you can do bad things by putting "../" into the name (among other things). Let's sanity-check these names to avoid building a path that can be exploited. There are two main decisions: 1. What should the allowed syntax be? It's tempting to reuse verify_path(), since submodule names typically come from in-repo paths. But there are two reasons not to: a. It's technically more strict than what we need, as we really care only about breaking out of the $GIT_DIR/modules/ hierarchy. E.g., having a submodule named "foo/.git" isn't actually dangerous, and it's possible that somebody has manually given such a funny name. b. Since we'll eventually use this checking logic in fsck to prevent downstream repositories, it should be consistent across platforms. Because verify_path() relies on is_dir_sep(), it wouldn't block "foo\..\bar" on a non-Windows machine. 2. Where should we enforce it? These days most of the .gitmodules reads go through submodule-config.c, so I've put it there in the reading step. That should cover all of the C code. We also construct the name for "git submodule add" inside the git-submodule.sh script. This is probably not a big deal for security since the name is coming from the user anyway, but it would be polite to remind them if the name they pick is invalid (and we need to expose the name-checker to the shell anyway for our test scripts). This patch issues a warning when reading .gitmodules and just ignores the related config entry completely. This will generally end up producing a sensible error, as it works the same as a .gitmodules file which is missing a submodule entry (so "submodule update" will barf, but "git clone --recurse-submodules" will print an error but not abort the clone. There is one minor oddity, which is that we print the warning once per malformed config key (since that's how the config subsystem gives us the entries). So in the new test, for example, the user would see three warnings. That's OK, since the intent is that this case should never come up outside of malicious repositories (and then it might even benefit the user to see the message multiple times). Credit for finding this vulnerability and the proof of concept from which the test script was adapted goes to Etienne Stalmans. Signed-off-by: Jeff King <peff@peff.net>
2018-05-16object-store: move object access functions to object-store.hLibravatar Stefan Beller1-0/+1
This should make these functions easier to find and cache.h less overwhelming to read. In particular, this moves: - read_object_file - oid_object_info - write_object_file As a result, most of the codebase needs to #include object-store.h. In this patch the #include is only added to files that would fail to compile otherwise. It would be better to #include wherever identifiers from the header are used. That can happen later when we have better tooling for it. Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-05-08Merge branch 'sb/submodule-move-nested'Libravatar Junio C Hamano1-18/+11
Moving a submodule that itself has submodule in it with "git mv" forgot to make necessary adjustment to the nested sub-submodules; now the codepath learned to recurse into the submodules. * sb/submodule-move-nested: submodule: fixup nested submodules after moving the submodule submodule-config: remove submodule_from_cache submodule-config: add repository argument to submodule_from_{name, path} submodule-config: allow submodule_free to handle arbitrary repositories grep: remove "repo" arg from non-supporting funcs submodule.h: drop declaration of connect_work_tree_and_git_dir
2018-05-02submodule-config: convert structures to object_idLibravatar brian m. carlson1-33/+33
Convert struct submodule and struct parse_config_parameter to use struct object_id. Adjust the functions which take members of these structures as arguments to also use struct object_id. Include cache.h into submodule-config.h to make struct object_id visible. Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-03-29submodule-config: remove submodule_from_cacheLibravatar Stefan Beller1-9/+0
This continues the story of bf12fcdf5e (submodule-config: store the_submodule_cache in the_repository, 2017-06-22). The previous patch taught submodule_from_path to take a repository into account, such that submodule_from_{path, cache} are the same now. Remove submodule_from_cache, migrating all its callers to submodule_from_path. Reviewed-by: Jonathan Tan <jonathantanmy@google.com> Signed-off-by: Stefan Beller <sbeller@google.com> Reviewed-by: Jonathan Tan <jonathantanmy@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-03-29submodule-config: add repository argument to submodule_from_{name, path}Libravatar Stefan Beller1-6/+8
This enables submodule_from_{name, path} to handle arbitrary repositories. All callers just pass in the_repository, a later patch will pass in other repos. While at it remove the extern key word from the declarations. Reviewed-by: Jonathan Tan <jonathantanmy@google.com> Signed-off-by: Stefan Beller <sbeller@google.com> Reviewed-by: Jonathan Tan <jonathantanmy@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-03-29submodule-config: allow submodule_free to handle arbitrary repositoriesLibravatar Stefan Beller1-3/+3
At some point we may want to rename the function so that it describes what it actually does as 'submodule_free' doesn't quite describe that this clears a repository's submodule cache. But that's beyond the scope of this series. While at it remove the extern key word from its declaration. Signed-off-by: Stefan Beller <sbeller@google.com> Reviewed-by: Jonathan Tan <jonathantanmy@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-03-14sha1_file: convert read_sha1_file to struct object_idLibravatar brian m. carlson1-1/+1
Convert read_sha1_file to take a pointer to struct object_id and rename it read_object_file. Do the same for read_sha1_file_extended. Convert one use in grep.c to use the new function without any other code change, since the pointer being passed is a void pointer that is already initialized with a pointer to struct object_id. Update the declaration and definitions of the modified functions, and apply the following semantic patch to convert the remaining callers: @@ expression E1, E2, E3; @@ - read_sha1_file(E1.hash, E2, E3) + read_object_file(&E1, E2, E3) @@ expression E1, E2, E3; @@ - read_sha1_file(E1->hash, E2, E3) + read_object_file(E1, E2, E3) @@ expression E1, E2, E3, E4; @@ - read_sha1_file_extended(E1.hash, E2, E3, E4) + read_object_file_extended(&E1, E2, E3, E4) @@ expression E1, E2, E3, E4; @@ - read_sha1_file_extended(E1->hash, E2, E3, E4) + read_object_file_extended(E1, E2, E3, E4) Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-02-14Correct mispellings of ".gitmodule" to ".gitmodules"Libravatar Robert P. J. Day1-2/+2
There are a small number of misspellings, ".gitmodule", scattered throughout the code base, correct them ... no apparent functional changes. Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-08-26Merge branch 'bw/submodule-config-cleanup'Libravatar Junio C Hamano1-12/+53
Code clean-up to avoid mixing values read from the .gitmodules file and values read from the .git/config file. * bw/submodule-config-cleanup: submodule: remove gitmodules_config unpack-trees: improve loading of .gitmodules submodule-config: lazy-load a repository's .gitmodules file submodule-config: move submodule-config functions to submodule-config.c submodule-config: remove support for overlaying repository config diff: stop allowing diff to have submodules configured in .git/config submodule: remove submodule_config callback routine unpack-trees: don't respect submodule.update submodule: don't rely on overlayed config when setting diffopts fetch: don't overlay config with submodule-config submodule--helper: don't overlay config in update-clone submodule--helper: don't overlay config in remote_submodule_branch add, reset: ensure submodules can be added or reset submodule: don't use submodule_from_name t7411: check configuration parsing errors
2017-08-22Merge branch 'ma/parse-maybe-bool'Libravatar Junio C Hamano1-3/+3
Code clean-up. * ma/parse-maybe-bool: parse_decoration_style: drop unused argument `var` treewide: deprecate git_config_maybe_bool, use git_parse_maybe_bool config: make git_{config,parse}_maybe_bool equivalent config: introduce git_parse_maybe_bool_text t5334: document that git push --signed=1 does not work Doc/git-{push,send-pack}: correct --sign= to --signed=
2017-08-22Merge branch 'bw/grep-recurse-submodules'Libravatar Junio C Hamano1-0/+8
"git grep --recurse-submodules" has been reworked to give a more consistent output across submodule boundary (and do its thing without having to fork a separate process). * bw/grep-recurse-submodules: grep: recurse in-process using 'struct repository' submodule: merge repo_read_gitmodules and gitmodules_config submodule: check for unmerged .gitmodules outside of config parsing submodule: check for unstaged .gitmodules outside of config parsing submodule: remove fetch.recursesubmodules from submodule-config parsing submodule: remove submodule.fetchjobs from submodule-config parsing config: add config_from_gitmodules cache.h: add GITMODULES_FILE macro repository: have the_repository use the_index repo_read_index: don't discard the index
2017-08-11Merge branch 'sb/hashmap-cleanup'Libravatar Junio C Hamano1-6/+12
Many uses of comparision callback function the hashmap API uses cast the callback function type when registering it to hashmap_init(), which defeats the compile time type checking when the callback interface changes (e.g. gaining more parameters). The callback implementations have been updated to take "void *" pointers and cast them to the type they expect instead. * sb/hashmap-cleanup: t/helper/test-hashmap: use custom data instead of duplicate cmp functions name-hash.c: drop hashmap_cmp_fn cast submodule-config.c: drop hashmap_cmp_fn cast remote.c: drop hashmap_cmp_fn cast patch-ids.c: drop hashmap_cmp_fn cast convert/sub-process: drop cast to hashmap_cmp_fn config.c: drop hashmap_cmp_fn cast builtin/describe: drop hashmap_cmp_fn cast builtin/difftool.c: drop hashmap_cmp_fn cast attr.c: drop hashmap_cmp_fn cast
2017-08-11Merge branch 'bc/object-id'Libravatar Junio C Hamano1-19/+19
Conversion from uchar[20] to struct object_id continues. * bc/object-id: sha1_name: convert uses of 40 to GIT_SHA1_HEXSZ sha1_name: convert GET_SHA1* flags to GET_OID* sha1_name: convert get_sha1* to get_oid* Convert remaining callers of get_sha1 to get_oid. builtin/unpack-file: convert to struct object_id bisect: convert bisect_checkout to struct object_id builtin/update_ref: convert to struct object_id sequencer: convert to struct object_id remote: convert struct push_cas to struct object_id submodule: convert submodule config lookup to use object_id builtin/merge-tree: convert remaining caller of get_sha1 to object_id builtin/fsck: convert remaining caller of get_sha1 to object_id
2017-08-07treewide: deprecate git_config_maybe_bool, use git_parse_maybe_boolLibravatar Martin Ågren1-2/+2
The only difference between these is that the former takes an argument `name` which it ignores completely. Still, the callers are quite careful to provide reasonable values for it. Once in-flight topics have landed, we should be able to remove git_config_maybe_bool. In the meantime, document it as deprecated in the technical documentation. While at it, document git_parse_maybe_bool. Signed-off-by: Martin Ågren <martin.agren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-08-03submodule-config: lazy-load a repository's .gitmodules fileLibravatar Brandon Williams1-5/+22
In order to use the submodule-config subsystem, callers first need to initialize it by calling 'repo_read_gitmodules()' or 'gitmodules_config()' (which just redirects to 'repo_read_gitmodules()'). There are a couple of callers who need to load an explicit revision of the repository's .gitmodules file (grep) or need to modify the .gitmodules file so they would need to load it before modify the file (checkout), but the majority of callers are simply reading the .gitmodules file present in the working tree. For the common case it would be nice to avoid the boilerplate of initializing the submodule-config system before using it, so instead let's perform lazy-loading of the submodule-config system. Remove the calls to reading the gitmodules file from ls-files to show that lazy-loading the .gitmodules file works. Signed-off-by: Brandon Williams <bmwill@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-08-03submodule-config: move submodule-config functions to submodule-config.cLibravatar Brandon Williams1-7/+31
Migrate the functions used to initialize the submodule-config to submodule-config.c so that the callback routine used in the initialization process can be static and prevent it from being used outside of initializing the submodule-config through the main API. Signed-off-by: Brandon Williams <bmwill@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-08-02Merge branch 'bc/object-id' into bw/submodule-config-cleanupLibravatar Junio C Hamano1-19/+19
* bc/object-id: sha1_name: convert uses of 40 to GIT_SHA1_HEXSZ sha1_name: convert GET_SHA1* flags to GET_OID* sha1_name: convert get_sha1* to get_oid* Convert remaining callers of get_sha1 to get_oid. builtin/unpack-file: convert to struct object_id bisect: convert bisect_checkout to struct object_id builtin/update_ref: convert to struct object_id sequencer: convert to struct object_id remote: convert struct push_cas to struct object_id submodule: convert submodule config lookup to use object_id builtin/merge-tree: convert remaining caller of get_sha1 to object_id builtin/fsck: convert remaining caller of get_sha1 to object_id tag: convert gpg_verify_tag to use struct object_id commit: convert lookup_commit_graft to struct object_id
2017-08-02submodule: remove submodule.fetchjobs from submodule-config parsingLibravatar Brandon Williams1-0/+8
The '.gitmodules' file should only contain information pertinent to configuring individual submodules (name to path mapping, URL where to obtain the submodule, etc.) while other configuration like the number of jobs to use when fetching submodules should be a part of the repository's config. Remove the 'submodule.fetchjobs' configuration option from the general submodule-config parsing and instead rely on using the 'config_from_gitmodules()' in order to maintain backwards compatibility with this config being placed in the '.gitmodules' file. Signed-off-by: Brandon Williams <bmwill@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-07-17submodule: convert submodule config lookup to use object_idLibravatar brian m. carlson1-19/+19
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-07-13Merge branch 'sb/pull-rebase-submodule'Libravatar Junio C Hamano1-0/+22
"git pull --rebase --recurse-submodules" learns to rebase the branch in the submodules to an updated base. * sb/pull-rebase-submodule: builtin/fetch cleanup: always set default value for submodule recursing pull: optionally rebase submodules (remote submodule changes only) builtin/fetch: parse recurse-submodules-default at default options parsing builtin/fetch: factor submodule recurse parsing out to submodule config
2017-07-13Merge branch 'sb/hashmap-customize-comparison'Libravatar Junio C Hamano1-6/+8
Update the hashmap API so that data to customize the behaviour of the comparison function can be specified at the time a hashmap is initialized. * sb/hashmap-customize-comparison: hashmap: migrate documentation from Documentation/technical into header patch-ids.c: use hashmap correctly hashmap.h: compare function has access to a data field
2017-07-05submodule-config.c: drop hashmap_cmp_fn castLibravatar Stefan Beller1-6/+12
Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>