| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
When reading the config of a submodule, if reading from a blob, read
using an explicitly specified repository instead of by adding the
submodule's ODB as an alternate and then reading an object from
the_repository.
This makes the "grep --recurse-submodules with submodules without
.gitmodules in the working tree" test in t7814 work when
GIT_TEST_FATAL_REGISTER_SUBMODULE_ODB is true.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Reviewed-by: Matheus Tavares <matheus.bernardino@usp.br>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Up until recently, object IDs did not have an algorithm member, only a
hash. Consequently, it was possible to share one null (all-zeros)
object ID among all hash algorithms. Now that we're going to be
handling objects from multiple hash algorithms, it's important to make
sure that all object IDs have a correct algorithm field.
Introduce a per-algorithm null OID, and add it to struct hash_algo.
Introduce a wrapper function as well, and use it everywhere we used to
use the null_oid constant.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
hashmap_free(), hashmap_free_entries(), and hashmap_free_() have existed
for a while, but aren't necessarily the clearest names, especially with
hashmap_partial_clear() being added to the mix and lazy-initialization
now being supported. Peff suggested we adopt the following names[1]:
- hashmap_clear() - remove all entries and de-allocate any
hashmap-specific data, but be ready for reuse
- hashmap_clear_and_free() - ditto, but free the entries themselves
- hashmap_partial_clear() - remove all entries but don't deallocate
table
- hashmap_partial_clear_and_free() - ditto, but free the entries
This patch provides the new names and converts all existing callers over
to the new naming scheme.
[1] https://lore.kernel.org/git/20201030125059.GA3277724@coredump.intra.peff.net/
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In "fetch", there are two parameters submodule_fetch_jobs_config and
recurse_submodules that can be set in a variety of ways: through
.gitmodules, through .git/config, and through the command line.
Currently "fetch" handles this by first reading .gitmodules, then
reading .git/config (allowing it to overwrite existing values), then
reading the command line (allowing it to overwrite existing values).
Notice that we can avoid reading .gitmodules if .git/config and/or the
command line already provides us with what we need. In addition, if
recurse_submodules is found to be "no", we do not need the value of
submodule_fetch_jobs_config.
Avoiding reading .gitmodules is especially important when we use "git
fetch" to perform lazy fetches in a partial clone because the
.gitmodules file itself might need to be lazy fetched (and otherwise
causing an infinite loop).
In light of all this, avoid reading .gitmodules until necessary. When
reading it, we may only need one of the two parameters it provides, so
teach fetch_config_from_gitmodules() to support NULL arguments. With
this patch, users (including Git itself when invoking "git fetch" to
lazy-fetch) will be able to guarantee avoiding reading .gitmodules by
passing --recurse-submodules=no.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We return the length to a subset of a string using an "int *"
out-parameter. This is fine most of the time, as we'd expect config keys
to be relatively short, but it could behave oddly if we had a gigantic
config key. A more appropriate type is size_t.
Let's switch over, which lets our callers use size_t as appropriate
(they are bound by our type because they must pass the out-parameter as
a pointer). This is mostly just a cleanup to make it clear this code
handles long strings correctly. In practice, our config parser already
chokes on long key names (because of a similar int/size_t mixup!).
When doing an int/size_t conversion, we have to be careful that nobody
was trying to assign a negative value to the variable. I manually
confirmed that for each case here. They tend to just feed the result to
xmemdupz() or similar; in a few cases I adjusted the parameter types for
helper functions to make sure the size_t is preserved.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git config" learned to show in which "scope", in addition to in
which file, each config setting comes from.
* mr/show-config-scope:
config: add '--show-scope' to print the scope of a config value
submodule-config: add subomdule config scope
config: teach git_config_source to remember its scope
config: preserve scope in do_git_config_sequence
config: clarify meaning of command line scoping
config: split repo scope to local and worktree
config: make scope_name non-static and rename it
t1300: create custom config file without special characters
t1300: fix over-indented HERE-DOCs
config: fix typo in variable name
|
|
Before the changes to teach git_config_source to remember scope
information submodule-config.c never needed to consider the question of
config scope. Even though zeroing out git_config_source is still
correct and preserved the previous behavior of setting the scope to
CONFIG_SCOPE_UNKNOWN, it's better to be explicit about such situations
by explicitly setting the scope. As none of the current config_scope
enumerations make sense we create CONFIG_SCOPE_SUBMODULE to describe the
situation.
Signed-off-by: Matthew Rogers <mattr94@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Currently, submodule-config.c doesn't have an externally accessible
function to read gitmodules only if it wasn't already read. But this
exact behavior is internally implemented by gitmodules_read_check(), to
perform a lazy load. Let's merge this function with
repo_read_gitmodules() adding a 'skip_if_read' which allows both
internal and external callers to access this functionality. This
simplifies a little the code. The added option will also be used in
the following patch.
Signed-off-by: Matheus Tavares <matheus.bernardino@usp.br>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Correct unintentional duplication(s) of words, such as "the the",
and "can can" etc.
The changes are only applied to cases where it's fixing what is clearly
wrong or prone to misunderstanding, as suggested by the reviewers.
Helped-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Helped-by: Denton Liu <liu.denton@gmail.com>
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: ryenus <ryenus@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* maint-2.23: (44 commits)
Git 2.23.1
Git 2.22.2
Git 2.21.1
mingw: sh arguments need quoting in more circumstances
mingw: fix quoting of empty arguments for `sh`
mingw: use MSYS2 quoting even when spawning shell scripts
mingw: detect when MSYS2's sh is to be spawned more robustly
t7415: drop v2.20.x-specific work-around
Git 2.20.2
t7415: adjust test for dubiously-nested submodule gitdirs for v2.20.x
Git 2.19.3
Git 2.18.2
Git 2.17.3
Git 2.16.6
test-drop-caches: use `has_dos_drive_prefix()`
Git 2.15.4
Git 2.14.6
mingw: handle `subst`-ed "DOS drives"
mingw: refuse to access paths with trailing spaces or periods
mingw: refuse to access paths with illegal characters
...
|
|
* maint-2.21: (42 commits)
Git 2.21.1
mingw: sh arguments need quoting in more circumstances
mingw: fix quoting of empty arguments for `sh`
mingw: use MSYS2 quoting even when spawning shell scripts
mingw: detect when MSYS2's sh is to be spawned more robustly
t7415: drop v2.20.x-specific work-around
Git 2.20.2
t7415: adjust test for dubiously-nested submodule gitdirs for v2.20.x
Git 2.19.3
Git 2.18.2
Git 2.17.3
Git 2.16.6
test-drop-caches: use `has_dos_drive_prefix()`
Git 2.15.4
Git 2.14.6
mingw: handle `subst`-ed "DOS drives"
mingw: refuse to access paths with trailing spaces or periods
mingw: refuse to access paths with illegal characters
unpack-trees: let merged_entry() pass through do_add_entry()'s errors
quote-stress-test: offer to test quoting arguments for MSYS2 sh
...
|
|
* maint-2.19: (34 commits)
Git 2.19.3
Git 2.18.2
Git 2.17.3
Git 2.16.6
test-drop-caches: use `has_dos_drive_prefix()`
Git 2.15.4
Git 2.14.6
mingw: handle `subst`-ed "DOS drives"
mingw: refuse to access paths with trailing spaces or periods
mingw: refuse to access paths with illegal characters
unpack-trees: let merged_entry() pass through do_add_entry()'s errors
quote-stress-test: offer to test quoting arguments for MSYS2 sh
t6130/t9350: prepare for stringent Win32 path validation
quote-stress-test: allow skipping some trials
quote-stress-test: accept arguments to test via the command-line
tests: add a helper to stress test argument quoting
mingw: fix quoting of arguments
Disallow dubiously-nested submodule git directories
protect_ntfs: turn on NTFS protection by default
path: also guard `.gitmodules` against NTFS Alternate Data Streams
...
|
|
* maint-2.18: (33 commits)
Git 2.18.2
Git 2.17.3
Git 2.16.6
test-drop-caches: use `has_dos_drive_prefix()`
Git 2.15.4
Git 2.14.6
mingw: handle `subst`-ed "DOS drives"
mingw: refuse to access paths with trailing spaces or periods
mingw: refuse to access paths with illegal characters
unpack-trees: let merged_entry() pass through do_add_entry()'s errors
quote-stress-test: offer to test quoting arguments for MSYS2 sh
t6130/t9350: prepare for stringent Win32 path validation
quote-stress-test: allow skipping some trials
quote-stress-test: accept arguments to test via the command-line
tests: add a helper to stress test argument quoting
mingw: fix quoting of arguments
Disallow dubiously-nested submodule git directories
protect_ntfs: turn on NTFS protection by default
path: also guard `.gitmodules` against NTFS Alternate Data Streams
is_ntfs_dotgit(): speed it up
...
|
|
* maint-2.17: (32 commits)
Git 2.17.3
Git 2.16.6
test-drop-caches: use `has_dos_drive_prefix()`
Git 2.15.4
Git 2.14.6
mingw: handle `subst`-ed "DOS drives"
mingw: refuse to access paths with trailing spaces or periods
mingw: refuse to access paths with illegal characters
unpack-trees: let merged_entry() pass through do_add_entry()'s errors
quote-stress-test: offer to test quoting arguments for MSYS2 sh
t6130/t9350: prepare for stringent Win32 path validation
quote-stress-test: allow skipping some trials
quote-stress-test: accept arguments to test via the command-line
tests: add a helper to stress test argument quoting
mingw: fix quoting of arguments
Disallow dubiously-nested submodule git directories
protect_ntfs: turn on NTFS protection by default
path: also guard `.gitmodules` against NTFS Alternate Data Streams
is_ntfs_dotgit(): speed it up
mingw: disallow backslash characters in tree objects' file names
...
|
|
* maint-2.15: (29 commits)
Git 2.15.4
Git 2.14.6
mingw: handle `subst`-ed "DOS drives"
mingw: refuse to access paths with trailing spaces or periods
mingw: refuse to access paths with illegal characters
unpack-trees: let merged_entry() pass through do_add_entry()'s errors
quote-stress-test: offer to test quoting arguments for MSYS2 sh
t6130/t9350: prepare for stringent Win32 path validation
quote-stress-test: allow skipping some trials
quote-stress-test: accept arguments to test via the command-line
tests: add a helper to stress test argument quoting
mingw: fix quoting of arguments
Disallow dubiously-nested submodule git directories
protect_ntfs: turn on NTFS protection by default
path: also guard `.gitmodules` against NTFS Alternate Data Streams
is_ntfs_dotgit(): speed it up
mingw: disallow backslash characters in tree objects' file names
path: safeguard `.git` against NTFS Alternate Streams Accesses
clone --recurse-submodules: prevent name squatting on Windows
is_ntfs_dotgit(): only verify the leading segment
...
|
|
Since ac1fbbda2013 (submodule: do not copy unknown update mode from
.gitmodules, 2013-12-02), Git has been careful to avoid copying
[submodule "foo"]
update = !run an arbitrary scary command
from .gitmodules to a repository's local config, copying in the
setting 'update = none' instead. The gitmodules(5) manpage documents
the intention:
The !command form is intentionally ignored here for security
reasons
Unfortunately, starting with v2.20.0-rc0 (which integrated ee69b2a9
(submodule--helper: introduce new update-module-mode helper,
2018-08-13, first released in v2.20.0-rc0)), there are scenarios where
we *don't* ignore it: if the config store contains no
submodule.foo.update setting, the submodule-config API falls back to
reading .gitmodules and the repository-supplied !command gets run
after all.
This was part of a general change over time in submodule support to
read more directly from .gitmodules, since unlike .git/config it
allows a project to change values between branches and over time
(while still allowing .git/config to override things). But it was
never intended to apply to this kind of dangerous configuration.
The behavior change was not advertised in ee69b2a9's commit message
and was missed in review.
Let's take the opportunity to make the protection more robust, even in
Git versions that are technically not affected: instead of quietly
converting 'update = !command' to 'update = none', noisily treat it as
an error. Allowing the setting but treating it as meaning something
else was just confusing; users are better served by seeing the error
sooner. Forbidding the construct makes the semantics simpler and
means we can check for it in fsck (in a separate patch).
As a result, the submodule-config API cannot read this value from
.gitmodules under any circumstance, and we can declare with confidence
For security reasons, the '!command' form is not accepted
here.
Reported-by: Joern Schneeweisz <jschneeweisz@gitlab.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
|
|
Since these macros already take a `keyvar' pointer of a known type,
we can rely on OFFSETOF_VAR to get the correct offset without
relying on non-portable `__typeof__' and `offsetof'.
Argument order is also rearranged, so `keyvar' and `member' are
sequential as they are used as: `keyvar->member'
Signed-off-by: Eric Wong <e@80x24.org>
Reviewed-by: Derrick Stolee <stolee@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
While we cannot rely on a `__typeof__' operator being portable
to use with `offsetof'; we can calculate the pointer offset
using an existing pointer and the address of a member using
pointer arithmetic for compilers without `__typeof__'.
This allows us to simplify usage of hashmap iterator macros
by not having to specify a type when a pointer of that type
is already given.
In the future, list iterator macros (e.g. list_for_each_entry)
may also be implemented using OFFSETOF_VAR to save hackers the
trouble of using container_of/list_entry macros and without
relying on non-portable `__typeof__'.
v3: use `__typeof__' to avoid clang warnings
Signed-off-by: Eric Wong <e@80x24.org>
Reviewed-by: Derrick Stolee <stolee@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
`hashmap_free_entries' behaves like `container_of' and passes
the offset of the hashmap_entry struct to the internal
`hashmap_free_' function, allowing the function to free any
struct pointer regardless of where the hashmap_entry field
is located.
`hashmap_free' no longer takes any arguments aside from
the hashmap itself.
Signed-off-by: Eric Wong <e@80x24.org>
Reviewed-by: Derrick Stolee <stolee@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
And add *_entry variants to perform container_of as necessary
to simplify most callers.
Signed-off-by: Eric Wong <e@80x24.org>
Reviewed-by: Derrick Stolee <stolee@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Inspired by list_for_each_entry in the Linux kernel.
Once again, these are somewhat compromised usability-wise
by compilers lacking __typeof__ support.
Signed-off-by: Eric Wong <e@80x24.org>
Reviewed-by: Derrick Stolee <stolee@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Another step in eliminating the requirement of hashmap_entry
being the first member of a struct.
Signed-off-by: Eric Wong <e@80x24.org>
Reviewed-by: Derrick Stolee <stolee@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Update callers to use hashmap_get_entry, hashmap_get_entry_from_hash
or container_of as appropriate.
This is another step towards eliminating the requirement of
hashmap_entry being the first field in a struct.
Signed-off-by: Eric Wong <e@80x24.org>
Reviewed-by: Derrick Stolee <stolee@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This is less error-prone than "void *" as the compiler now
detects invalid types being passed.
Signed-off-by: Eric Wong <e@80x24.org>
Reviewed-by: Derrick Stolee <stolee@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This is less error-prone than "const void *" as the compiler
now detects invalid types being passed.
Signed-off-by: Eric Wong <e@80x24.org>
Reviewed-by: Derrick Stolee <stolee@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This is less error-prone than "const void *" as the compiler
now detects invalid types being passed.
Signed-off-by: Eric Wong <e@80x24.org>
Reviewed-by: Derrick Stolee <stolee@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This is less error-prone than "void *" as the compiler now
detects invalid types being passed.
Signed-off-by: Eric Wong <e@80x24.org>
Reviewed-by: Derrick Stolee <stolee@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
C compilers do type checking to make life easier for us. So
rely on that and update all hashmap_entry_init callers to take
"struct hashmap_entry *" to avoid future bugs while improving
safety and readability.
Signed-off-by: Eric Wong <e@80x24.org>
Reviewed-by: Derrick Stolee <stolee@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Since 76e9bdc437 (submodule: support reading .gitmodules when it's not
in the working tree - 2018-10-25), every time you do
git grep --recurse-submodules
you are likely to see one warning line per submodule (unless all those
submodules also have submodules). On a superproject with plenty of
submodules (I've seen one with 67) this is really annoying.
The warning was there because we could not resolve extended SHA-1
syntax on a submodule. We can now. Make use of the new API and get rid
of the warning.
It would be even better if config_with_options() supports multiple
repositories too. But one step at a time.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This adds value completion for a couple more paramters. To make it
easier to maintain these hard coded lists, add a comment at the original
list/code to remind people to update git-completion.bash too.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The submodule support has been updated to read from the blob at
HEAD:.gitmodules when the .gitmodules file is missing from the
working tree.
* ao/submodule-wo-gitmodules-checked-out:
t/helper: add test-submodule-nested-repo-config
submodule: support reading .gitmodules when it's not in the working tree
submodule: add a helper to check if it is safe to write to .gitmodules
t7506: clean up .gitmodules properly before setting up new scenario
submodule: use the 'submodule--helper config' command
submodule--helper: add a new 'config' subcommand
t7411: be nicer to future tests and really clean things up
t7411: merge tests 5 and 6
submodule: factor out a config_set_in_gitmodules_file_gently function
submodule: add a print_config_from_gitmodules() helper
|
|
When the .gitmodules file is not available in the working tree, try
using the content from the index and from the current branch. This
covers the case when the file is part of the repository but for some
reason it is not checked out, for example because of a sparse checkout.
This makes it possible to use at least the 'git submodule' commands
which *read* the gitmodules configuration file without fully populating
the working tree.
Writing to .gitmodules will still require that the file is checked out,
so check for that before calling config_set_in_gitmodules_file_gently.
Add a similar check also in git-submodule.sh::cmd_add() to anticipate
the eventual failure of the "git submodule add" command when .gitmodules
is not safely writeable; this prevents the command from leaving the
repository in a spurious state (e.g. the submodule repository was cloned
but .gitmodules was not updated because
config_set_in_gitmodules_file_gently failed).
Moreover, since config_from_gitmodules() now accesses the global object
store, it is necessary to protect all code paths which call the function
against concurrent access to the global object store. Currently this
only happens in builtin/grep.c::grep_submodules(), so call
grep_read_lock() before invoking code involving
config_from_gitmodules().
Finally, add t7418-submodule-sparse-gitmodules.sh to verify that reading
from .gitmodules succeeds and that writing to it fails when the file is
not checked out.
NOTE: there is one rare case where this new feature does not work
properly yet: nested submodules without .gitmodules in their working
tree. This has been documented with a warning and a test_expect_failure
item in t7814, and in this case the current behavior is not altered: no
config is read.
Signed-off-by: Antonio Ospite <ao2@ao2.it>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Introduce a new config_set_in_gitmodules_file_gently() function to write
config values to the .gitmodules file.
This is in preparation for a future change which will use the function
to write to the .gitmodules file in a more controlled way instead of
using "git config -f .gitmodules".
The purpose of the change is mainly to centralize the code that writes
to the .gitmodules file to avoid some duplication.
The naming follows git_config_set_in_file_gently() but the git_ prefix
is removed to communicate that this is not a generic git-config API.
Signed-off-by: Antonio Ospite <ao2@ao2.it>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add a new print_config_from_gitmodules() helper function to print values
from .gitmodules just like "git config -f .gitmodules" would.
This will be used by a new submodule--helper subcommand to be able to
access the .gitmodules file in a more controlled way.
Signed-off-by: Antonio Ospite <ao2@ao2.it>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* maint:
Git 2.19.1
Git 2.18.1
Git 2.17.2
fsck: detect submodule paths starting with dash
fsck: detect submodule urls starting with dash
Git 2.16.5
Git 2.15.3
Git 2.14.5
submodule-config: ban submodule paths that start with a dash
submodule-config: ban submodule urls that start with dash
submodule--helper: use "--" to signal end of clone options
|
|
* maint-2.18:
Git 2.18.1
Git 2.17.2
fsck: detect submodule paths starting with dash
fsck: detect submodule urls starting with dash
Git 2.16.5
Git 2.15.3
Git 2.14.5
submodule-config: ban submodule paths that start with a dash
submodule-config: ban submodule urls that start with dash
submodule--helper: use "--" to signal end of clone options
|
|
* maint-2.17:
Git 2.17.2
fsck: detect submodule paths starting with dash
fsck: detect submodule urls starting with dash
Git 2.16.5
Git 2.15.3
Git 2.14.5
submodule-config: ban submodule paths that start with a dash
submodule-config: ban submodule urls that start with dash
submodule--helper: use "--" to signal end of clone options
|
|
* maint-2.15:
Git 2.15.3
Git 2.14.5
submodule-config: ban submodule paths that start with a dash
submodule-config: ban submodule urls that start with dash
submodule--helper: use "--" to signal end of clone options
|
|
* maint-2.14:
Git 2.14.5
submodule-config: ban submodule paths that start with a dash
submodule-config: ban submodule urls that start with dash
submodule--helper: use "--" to signal end of clone options
|
|
We recently banned submodule urls that look like
command-line options. This is the matching change to ban
leading-dash paths.
As with the urls, this should not break any use cases that
currently work. Even with our "--" separator passed to
git-clone, git-submodule.sh gets confused. Without the code
portion of this patch, the clone of "-sub" added in t7417
would yield results like:
/path/to/git-submodule: 410: cd: Illegal option -s
/path/to/git-submodule: 417: cd: Illegal option -s
/path/to/git-submodule: 410: cd: Illegal option -s
/path/to/git-submodule: 417: cd: Illegal option -s
Fetched in submodule path '-sub', but it did not contain b56243f8f4eb91b2f1f8109452e659f14dd3fbe4. Direct fetching of that commit failed.
Moreover, naively adding such a submodule doesn't work:
$ git submodule add $url -sub
The following path is ignored by one of your .gitignore files:
-sub
even though there is no such ignore pattern (the test script
hacks around this with a well-placed "git mv").
Unlike leading-dash urls, though, it's possible that such a
path _could_ be useful if we eventually made it work. So
this commit should be seen not as recommending a particular
policy, but rather temporarily closing off a broken and
possibly dangerous code-path. We may revisit this decision
later.
There are two minor differences to the tests in t7416 (that
covered urls):
1. We don't have a "./-sub" escape hatch to make this
work, since the submodule code expects to be able to
match canonical index names to the path field (so you
are free to add submodule config with that path, but we
would never actually use it, since an index entry would
never start with "./").
2. After this patch, cloning actually succeeds. Since we
ignore the submodule.*.path value, we fail to find a
config stanza for our submodule at all, and simply
treat it as inactive. We still check for the "ignoring"
message.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The previous commit taught the submodule code to invoke our
"git clone $url $path" with a "--" separator so that we
aren't confused by urls or paths that start with dashes.
However, that's just one code path. It's not clear if there
are others, and it would be an easy mistake to add one in
the future. Moreover, even with the fix in the previous
commit, it's quite hard to actually do anything useful with
such an entry. Any url starting with a dash must fall into
one of three categories:
- it's meant as a file url, like "-path". But then any
clone is not going to have the matching path, since it's
by definition relative inside the newly created clone. If
you spell it as "./-path", the submodule code sees the
"/" and translates this to an absolute path, so it at
least works (assuming the receiver has the same
filesystem layout as you). But that trick does not apply
for a bare "-path".
- it's meant as an ssh url, like "-host:path". But this
already doesn't work, as we explicitly disallow ssh
hostnames that begin with a dash (to avoid option
injection against ssh).
- it's a remote-helper scheme, like "-scheme::data". This
_could_ work if the receiver bends over backwards and
creates a funny-named helper like "git-remote--scheme".
But normally there would not be any helper that matches.
Since such a url does not work today and is not likely to do
anything useful in the future, let's simply disallow them
entirely. That protects the existing "git clone" path (in a
belt-and-suspenders way), along with any others that might
exist.
Our tests cover two cases:
1. A file url with "./" continues to work, showing that
there's an escape hatch for people with truly silly
repo names.
2. A url starting with "-" is rejected.
Note that we expect case (2) to fail, but it would have done
so even without this commit, for the reasons given above.
So instead of just expecting failure, let's also check for
the magic word "ignoring" on stderr. That lets us know that
we failed for the right reason.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This is the flip side of the previous two patches: checking
for a non-zero oidcmp() can be more strictly expressed as
inequality. Like those patches, we write "!= 0" in the
coccinelle transformation, which covers by isomorphism the
more common:
if (oidcmp(E1, E2))
As with the previous two patches, this patch can be achieved
almost entirely by running "make coccicheck"; the only
differences are manual line-wrap fixes to match the original
code.
There is one thing to note for anybody replicating this,
though: coccinelle 1.0.4 seems to miss the case in
builtin/tag.c, even though it's basically the same as all
the others. Running with 1.0.7 does catch this, so
presumably it's just a coccinelle bug that was fixed in the
interim.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Recent "security fix" to pay attention to contents of ".gitmodules"
while accepting "git push" was a bit overly strict than necessary,
which has been adjusted.
* jk/fsck-gitmodules-gently:
fsck: downgrade gitmodulesParse default to "info"
fsck: split ".gitmodules too large" error from parse failure
fsck: silence stderr when parsing .gitmodules
config: add options parameter to git_config_from_mem
config: add CONFIG_ERROR_SILENT handler
config: turn die_on_error into caller-facing enum
|
|
Tighten the API to make it harder to misuse in-tree .gitmodules
file, even though it shares the same syntax with configuration
files, to read random configuration items from it.
* ao/config-from-gitmodules:
submodule-config: reuse config_from_gitmodules in repo_read_gitmodules
submodule-config: pass repository as argument to config_from_gitmodules
submodule-config: make 'config_from_gitmodules' private
submodule-config: add helper to get 'update-clone' config from .gitmodules
submodule-config: add helper function to get 'fetch' config from .gitmodules
config: move config_from_gitmodules to submodule-config.c
|
|
The conversion to pass "the_repository" and then "a_repository"
throughout the object access API continues.
* sb/object-store-grafts:
commit: allow lookup_commit_graft to handle arbitrary repositories
commit: allow prepare_commit_graft to handle arbitrary repositories
shallow: migrate shallow information into the object parser
path.c: migrate global git_path_* to take a repository argument
cache: convert get_graft_file to handle arbitrary repositories
commit: convert read_graft_file to handle arbitrary repositories
commit: convert register_commit_graft to handle arbitrary repositories
commit: convert commit_graft_pos() to handle arbitrary repositories
shallow: add repository argument to is_repository_shallow
shallow: add repository argument to check_shallow_file_for_update
shallow: add repository argument to register_shallow
shallow: add repository argument to set_alternate_shallow_file
commit: add repository argument to lookup_commit_graft
commit: add repository argument to prepare_commit_graft
commit: add repository argument to read_graft_file
commit: add repository argument to register_commit_graft
commit: add repository argument to commit_graft_pos
object: move grafts to object parser
object-store: move object access functions to object-store.h
|
|
The underlying config parser knows how to handle a
config_options struct, but git_config_from_mem() always
passes NULL. Let's allow our callers to specify the options
struct.
We could add a "_with_options" variant, but since there are
only a handful of callers, let's just update them to pass
NULL.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Reuse config_from_gitmodules in repo_read_gitmodules to remove some
duplication and also have a single point where the .gitmodules file is
read.
The change does not introduce any new behavior, the same gitmodules_cb
config callback is still used, which only deals with configuration
specific to submodules.
The check about the repo's worktree is removed from repo_read_gitmodules
because it's already performed in config_from_gitmodules.
The config_from_gitmodules function is moved up in the file —unchanged—
before its users to avoid a forward declaration.
Signed-off-by: Antonio Ospite <ao2@ao2.it>
Acked-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Generalize config_from_gitmodules() to accept a repository as an argument.
This is in preparation to reuse the function in repo_read_gitmodules in
order to have a single point where the '.gitmodules' file is accessed.
Signed-off-by: Antonio Ospite <ao2@ao2.it>
Acked-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Now that 'config_from_gitmodules' is not used in the open, it can be
marked as private.
Hopefully this will prevent its usage for retrieving arbitrary
configuration form the '.gitmodules' file.
Signed-off-by: Antonio Ospite <ao2@ao2.it>
Acked-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add a helper function to make it clearer that retrieving 'update-clone'
configuration from the .gitmodules file is a special case supported
solely for backward compatibility purposes.
This change removes one direct use of 'config_from_gitmodules' for
options not strictly related to submodules: "submodule.fetchjobs" does
not describe a property of a submodule, but a behavior of other commands
when dealing with submodules, so it does not really belong to the
.gitmodules file.
This is in the effort to communicate better that .gitmodules is not to
be used as a mechanism to store arbitrary configuration in the
repository that any command can retrieve.
Signed-off-by: Antonio Ospite <ao2@ao2.it>
Acked-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
Jonathan Tan
brian m. carlson
Elijah Newren
Jeff King
Junio C Hamano
Matthew Rogers
Matheus Tavares
ryenus
Johannes Schindelin
Jonathan Nieder
Eric Wong
Nguyễn Thái Ngọc Duy
Antonio Ospite