| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Add a function for inserting a C string into a strbuf. Use it
throughout the source to get rid of magic string length constants and
explicit strlen() calls.
Like strbuf_addstr(), implement it as an inline function to avoid the
implicit strlen() calls to cause runtime overhead.
Helped-by: Taylor Blau <me@ttaylorr.com>
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This helper supports the scenario where Git has a populated `strbuf` and
wants to let the user edit it interactively.
In `git add -p`, we will use this to allow interactive hunk editing: the
diff hunks are already in memory, but we need to write them out to a
file so that an editor can be launched, then read everything back once
the user is done editing.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The list-objects-filter API (used to create a sparse/lazy clone)
learned to take a combined filter specification.
* md/list-objects-filter-combo:
list-objects-filter-options: make parser void
list-objects-filter-options: clean up use of ALLOC_GROW
list-objects-filter-options: allow mult. --filter
strbuf: give URL-encoding API a char predicate fn
list-objects-filter-options: make filter_spec a string_list
list-objects-filter-options: move error check up
list-objects-filter: implement composite filters
list-objects-filter-options: always supply *errbuf
list-objects-filter: put omits set in filter struct
list-objects-filter: encapsulate filter components
|
|
Currenly the data rate in throughput_string(...) method is
output by simple strbuf_humanise_bytes(...) call and '/s' append.
But for proper translation of such string the translator needs
full context.
Add strbuf_humanise_rate(...) method to properly print out
localizable version of data rate ('3.5 MiB/s' etc) with full context.
Strings with the units in strbuf_humanise_bytes(...) are marked
for translation.
Signed-off-by: Dimitriy Ryazantcev <dimitriy.ryazantcev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Allow callers to specify exactly what characters need to be URL-encoded
and which do not. This new API will be taken advantage of in a patch
later in this set.
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Matthew DeVore <matvore@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git stash" rewritten in C.
* ps/stash-in-c: (28 commits)
tests: add a special setup where stash.useBuiltin is off
stash: optionally use the scripted version again
stash: add back the original, scripted `git stash`
stash: convert `stash--helper.c` into `stash.c`
stash: replace all `write-tree` child processes with API calls
stash: optimize `get_untracked_files()` and `check_changes()`
stash: convert save to builtin
stash: make push -q quiet
stash: convert push to builtin
stash: convert create to builtin
stash: convert store to builtin
stash: convert show to builtin
stash: convert list to builtin
stash: convert pop to builtin
stash: convert branch to builtin
stash: convert drop and clear to builtin
stash: convert apply to builtin
stash: mention options in `show` synopsis
stash: add tests for `git stash show` config
stash: rename test cases to be more descriptive
...
|
|
Implement `strbuf_insertf()` and `strbuf_vinsertf()` to
insert data using a printf format string.
Original-idea-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Paul-Sebastian Ungureanu <ungureanupaulsebastian@gmail.com>
Helped-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Implement `strbuf_join_argv()` to join arguments
into a strbuf.
Signed-off-by: Paul-Sebastian Ungureanu <ungureanupaulsebastian@gmail.com>
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Expanding '%n' and '%xNN' is generic functionality, so extract that from
the pretty.c formatter into a callback that can be reused.
No functional change intended
Signed-off-by: Anders Waldenborg <anders@0x63.nu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Rewrite "git rebase" in C.
* pk/rebase-in-c-3-acts:
builtin rebase: stop if `git am` is in progress
builtin rebase: actions require a rebase in progress
builtin rebase: support --edit-todo and --show-current-patch
builtin rebase: support --quit
builtin rebase: support --abort
builtin rebase: support --skip
builtin rebase: support --continue
|
|
Rewrite of the remaining "rebase -i" machinery in C.
* ag/rebase-i-in-c:
rebase -i: move rebase--helper modes to rebase--interactive
rebase -i: remove git-rebase--interactive.sh
rebase--interactive2: rewrite the submodes of interactive rebase in C
rebase -i: implement the main part of interactive rebase as a builtin
rebase -i: rewrite init_basic_state() in C
rebase -i: rewrite write_basic_state() in C
rebase -i: rewrite the rest of init_revisions_and_shortrevisions() in C
rebase -i: implement the logic to initialize $revisions in C
rebase -i: remove unused modes and functions
rebase -i: rewrite complete_action() in C
t3404: todo list with commented-out commands only aborts
sequencer: change the way skip_unnecessary_picks() returns its result
sequencer: refactor append_todo_help() to write its message to a buffer
rebase -i: rewrite checkout_onto() in C
rebase -i: rewrite setup_reflog_action() in C
sequencer: add a new function to silence a command, except if it fails
rebase -i: rewrite the edit-todo functionality in C
editor: add a function to launch the sequence editor
rebase -i: rewrite append_todo_help() in C
sequencer: make three functions and an enum from sequencer.c public
|
|
The previous patch suggested the strbuf header to be the leading example
of how we would want our APIs to be documented. This may lead to some
scrutiny of that code and the coding style (which is different from the
API documentation style) and hence might be taken as an example on how
to format code as well.
So let's format strbuf.h in a way that we'd like to see:
* omit the extern keyword from function declarations
* name all parameters (usually the parameters are obvious from its type,
but consider exceptions like
`int strbuf_getwholeline_fd(struct strbuf *, int, int);`
* break overly long lines
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This commit adds the option `--continue` which is used to resume
rebase after merge conflicts. The code tries to stay as close to
the equivalent shell scripts found in `git-legacy-rebase.sh` as
possible.
When continuing a rebase, the state variables are read from state_dir.
Some of the state variables are not actually stored there, such as
`upstream`. The shell script version simply does not set them, but for
consistency, we unset them in the builtin version.
Signed-off-by: Pratik Karki <predatoramigo@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
As part of the rewrite of interactive rebase, the sequencer will need to
open the sequence editor to allow the user to edit the todo list.
Instead of duplicating the existing launch_editor() function, this
refactors it to a new function, launch_specified_editor(), which takes
the editor as a parameter, in addition to the path, the buffer and the
environment variables. launch_sequence_editor() is then added to launch
the sequence editor.
Signed-off-by: Alban Gruin <alban.gruin@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Rename detection logic in "diff" family that is used in "merge" has
learned to guess when all of x/a, x/b and x/c have moved to z/a,
z/b and z/c, it is likely that x/d added in the meantime would also
want to move to z/d by taking the hint that the entire directory
'x' moved to 'z'. A bug causing dirty files involved in a rename
to be overwritten during merge has also been fixed as part of this
work. Incidentally, this also avoids updating a file in the
working tree after a (non-trivial) merge whose result matches what
our side originally had.
* en/rename-directory-detection-reboot: (36 commits)
merge-recursive: fix check for skipability of working tree updates
merge-recursive: make "Auto-merging" comment show for other merges
merge-recursive: fix remainder of was_dirty() to use original index
merge-recursive: fix was_tracked() to quit lying with some renamed paths
t6046: testcases checking whether updates can be skipped in a merge
merge-recursive: avoid triggering add_cacheinfo error with dirty mod
merge-recursive: move more is_dirty handling to merge_content
merge-recursive: improve add_cacheinfo error handling
merge-recursive: avoid spurious rename/rename conflict from dir renames
directory rename detection: new testcases showcasing a pair of bugs
merge-recursive: fix remaining directory rename + dirty overwrite cases
merge-recursive: fix overwriting dirty files involved in renames
merge-recursive: avoid clobbering untracked files with directory renames
merge-recursive: apply necessary modifications for directory renames
merge-recursive: when comparing files, don't include trees
merge-recursive: check for file level conflicts then get new name
merge-recursive: add computation of collisions due to dir rename & merging
merge-recursive: check for directory level conflicts
merge-recursive: add get_directory_renames()
merge-recursive: make a helper function for cleanup for handle_renames
...
|
|
Before trying to apply directory renames to paths within the given
directories, we want to make sure that there aren't conflicts at the
file level either. If there aren't any, then get the new name from
any directory renames.
Reviewed-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The new "checkout-encoding" attribute can ask Git to convert the
contents to the specified encoding when checking out to the working
tree (and the other way around when checking in).
* ls/checkout-encoding:
convert: add round trip check based on 'core.checkRoundtripEncoding'
convert: add tracing for 'working-tree-encoding' attribute
convert: check for detectable errors in UTF encodings
convert: add 'working-tree-encoding' attribute
utf8: add function to detect a missing UTF-16/32 BOM
utf8: add function to detect prohibited UTF-16/32 BOM
utf8: teach same_encoding() alternative UTF encoding names
strbuf: add a case insensitive starts_with()
strbuf: add xstrdup_toupper()
strbuf: remove unnecessary NUL assignment in xstrdup_tolower()
|
|
This reverts commit e4bb62fa1eeee689744b413e29a50b4d1dae6886, reversing
changes made to 468165c1d8a442994a825f3684528361727cd8c0.
The topic appears to inflict severe regression in renaming merges,
even though the promise of it was that it would improve them.
We do not yet know which exact change in the topic was wrong, but in
the meantime, let's play it safe and revert it out of 'master'
before real Git-using projects are harmed.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Conversion from uchar[20] to struct object_id continues.
* bc/object-id: (36 commits)
convert: convert to struct object_id
sha1_file: introduce a constant for max header length
Convert lookup_replace_object to struct object_id
sha1_file: convert read_sha1_file to struct object_id
sha1_file: convert read_object_with_reference to object_id
tree-walk: convert tree entry functions to object_id
streaming: convert istream internals to struct object_id
tree-walk: convert get_tree_entry_follow_symlinks internals to object_id
builtin/notes: convert static functions to object_id
builtin/fmt-merge-msg: convert remaining code to object_id
sha1_file: convert sha1_object_info* to object_id
Convert remaining callers of sha1_object_info_extended to object_id
packfile: convert unpack_entry to struct object_id
sha1_file: convert retry_bad_packed_offset to struct object_id
sha1_file: convert assert_sha1_type to object_id
builtin/mktree: convert to struct object_id
streaming: convert open_istream to use struct object_id
sha1_file: convert check_sha1_signature to struct object_id
sha1_file: convert read_loose_object to use struct object_id
builtin/index-pack: convert struct ref_delta_entry to object_id
...
|
|
Rename detection logic in "diff" family that is used in "merge" has
learned to guess when all of x/a, x/b and x/c have moved to z/a,
z/b and z/c, it is likely that x/d added in the meantime would also
want to move to z/d by taking the hint that the entire directory
'x' moved to 'z'. A bug causing dirty files involved in a rename
to be overwritten during merge has also been fixed as part of this
work.
* en/rename-directory-detection: (29 commits)
merge-recursive: ensure we write updates for directory-renamed file
merge-recursive: avoid spurious rename/rename conflict from dir renames
directory rename detection: new testcases showcasing a pair of bugs
merge-recursive: fix remaining directory rename + dirty overwrite cases
merge-recursive: fix overwriting dirty files involved in renames
merge-recursive: avoid clobbering untracked files with directory renames
merge-recursive: apply necessary modifications for directory renames
merge-recursive: when comparing files, don't include trees
merge-recursive: check for file level conflicts then get new name
merge-recursive: add computation of collisions due to dir rename & merging
merge-recursive: check for directory level conflicts
merge-recursive: add get_directory_renames()
merge-recursive: make a helper function for cleanup for handle_renames
merge-recursive: split out code for determining diff_filepairs
merge-recursive: make !o->detect_rename codepath more obvious
merge-recursive: fix leaks of allocated renames and diff_filepairs
merge-recursive: introduce new functions to handle rename logic
merge-recursive: move the get_renames() function
directory rename detection: tests for handling overwriting dirty files
directory rename detection: tests for handling overwriting untracked files
...
|
|
Convert the declaration and definition of strbuf_add_unique_abbrev to
make it take a pointer to struct object_id. Predeclare the struct in
strbuf.h, as cache.h includes strbuf.h before it declares the struct,
and otherwise the struct declaration would have the wrong scope.
Apply the following semantic patch, along with the standard object_id
transforms, to adjust the callers:
@@
expression E1, E2, E3;
@@
- strbuf_add_unique_abbrev(E1, E2.hash, E3);
+ strbuf_add_unique_abbrev(E1, &E2, E3);
@@
expression E1, E2, E3;
@@
- strbuf_add_unique_abbrev(E1, E2->hash, E3);
+ strbuf_add_unique_abbrev(E1, E2, E3);
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Create a copy of an existing string and make all characters upper case.
Similar xstrdup_tolower().
This function is used in a subsequent commit.
Signed-off-by: Lars Schneider <larsxschneider@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Before trying to apply directory renames to paths within the given
directories, we want to make sure that there aren't conflicts at the
file level either. If there aren't any, then get the new name from
any directory renames.
Reviewed-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Similar to "mv a b/", which is actually "mv a b/a", we extract basename
of source worktree and create a directory of the same name at
destination if dst path is a directory.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In commit 63af4a8446 ("strbuf: make stripspace() part of strbuf",
2015-10-16), stripspace() was moved to strbuf and renamed to
strbuf_stripspace(). A "temporary" alias was added for the old name until
all topic branches had time to switch over. They have had time, so remove
the old alias.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* jn/strbuf-doc-re-reuse:
strbuf doc: reuse after strbuf_release is fine
|
|
strbuf_release leaves the strbuf in a valid, initialized state, so
there is no need to call strbuf_init after it.
Moreover, this is not likely to change in the future: strbuf_release
leaving the strbuf in a valid state has been easy to maintain and has
been very helpful for Git's robustness and simplicity (e.g.,
preventing use-after-free vulnerabilities).
Document the semantics so the next generation of Git developers can
become familiar with them without reading the implementation. It is
still not advisable to call strbuf_release too often because it is
wasteful, so add a note pointing to strbuf_reset for that.
The same semantics apply to strbuf_detach. Add a similar note to its
docstring to make that clear.
Improved-by: Jeff King <peff@peff.net>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Assorted bugfixes and clean-ups.
* ma/ts-cleanups:
ThreadSanitizer: add suppressions
strbuf_setlen: don't write to strbuf_slopbuf
pack-objects: take lock before accessing `remaining`
convert: always initialize attr_action in convert_attrs
|
|
strbuf_setlen(., 0) writes '\0' to sb.buf[0], where buf is either
allocated and unique to sb, or the global slopbuf. The slopbuf is meant
to provide a guarantee that buf is not NULL and that a freshly
initialized buffer contains the empty string, but it is not supposed to
be written to. That strbuf_setlen writes to slopbuf has at least two
implications:
First, it's wrong in principle. Second, it might be hiding misuses which
are just waiting to wreak havoc. Third, ThreadSanitizer detects a race
when multiple threads write to slopbuf at roughly the same time, thus
potentially making any more critical races harder to spot.
Avoid writing to strbuf_slopbuf in strbuf_setlen. Let's instead assert
on the first byte of slopbuf being '\0', since it helps ensure the
promised invariant of buf[len] == '\0'. (We know that "len" was already
0, or someone has messed with "alloc". If someone has fiddled with the
fields that much beyond the correct interface, they're on their own.)
This is a function which is used in many places, possibly also in hot
code paths. There are two branches in strbuf_setlen already, and we are
adding a third and possibly a fourth (in the assert). In hot code paths,
we hopefully reuse the buffer in order to avoid continous reallocations.
Thus, after a start-up phase, we should always take the same path,
which might help branch prediction, and we would never make the assert.
If a hot code path continuously reallocates, we probably have bigger
performance problems than this new safety-check.
Simple measurements do not contradict this reasoning. 100000000 times
resetting a buffer and adding the empty string takes 5.29/5.26 seconds
with/without this patch (best of three). Releasing at every iteration
yields 18.01/17.87. Adding a 30-character string instead of the empty
string yields 5.61/5.58 and 17.28/17.28(!).
This patch causes the git binary emitted by gcc 5.4.0 -O2 on my machine
to grow from 11389848 bytes to 11497184 bytes, an increase of 0.9%.
I also tried to piggy-back on the fact that we already check alloc,
which should already tell us whether we are using the slopbuf:
if (sb->alloc) {
if (len > sb->alloc - 1)
die("BUG: strbuf_setlen() beyond buffer");
sb->buf[len] = '\0';
} else {
if (len)
die("BUG: strbuf_setlen() beyond buffer");
assert(!strbuf_slopbuf[0]);
}
sb->len = len;
That didn't seem to be much slower (5.38, 18.02, 5.70, 17.32 seconds),
but it does introduce some minor code duplication. The resulting git
binary was 11510528 bytes large (another 0.1% increase).
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
There are certain C99 features that might be nice to use in
our code base, but we've hesitated to do so in order to
avoid breaking compatibility with older compilers. But we
don't actually know if people are even using pre-C99
compilers these days.
One way to figure that out is to introduce a very small use
of a feature, and see if anybody complains. The strbuf code
is a good place to do this for a few reasons:
- it always gets compiled, no matter which Makefile knobs
have been tweaked.
- it's very stable; this definition hasn't changed in a
long time and is not likely to (so if we have to revert,
it's unlikely to cause headaches)
If this patch can survive a few releases without complaint,
then we can feel more confident that designated initializers
are widely supported by our user base. It also is an
indication that other C99 features may be supported, but not
a guarantee (e.g., gcc had designated initializers before
C99 existed).
And if we do get complaints, then we'll have gained some
data and we can easily revert this patch.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
strbuf_addftime() is further getting tweaked.
* ab/strbuf-addftime-tzname-boolify:
strbuf: change an always NULL/"" strbuf_addftime() param to bool
strbuf.h comment: discuss strbuf_addftime() arguments in order
|
|
strbuf_addftime() allows callers to pass a time zone name for
expanding %Z. The only current caller either passes the empty string
or NULL, in which case %Z is handed over verbatim to strftime(3).
Replace that string parameter with a flag controlling whether to
remove %Z from the format specification. This simplifies the code.
Commit-message-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The pretty-format specifiers like '%h', '%t', etc. had an
optimization that no longer works correctly. In preparation/hope
of getting it correctly implemented, first discard the optimization
that is broken.
* rs/pretty-add-again:
pretty: recalculate duplicate short hashes
|
|
Change the comment documenting the strbuf_addftime() function to
discuss the parameters in the order in which they appear, which makes
this easier to read than discussing them out of order.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
There is no portable way to pass timezone information to strftime. Add
parameters for timezone offset and name to strbuf_addftime and let it
handle the timezone-related format specifiers %z and %Z internally.
Callers can opt out for %Z by passing NULL as timezone name. %z is
always handled internally -- this helps on Windows, where strftime would
expand it to a timezone name (same as %Z), in violation of POSIX.
Modifiers are not handled, e.g. %Ez is still passed to strftime.
Use an empty string as timezone name in show_date (the only current
caller) for now because we only have the timezone offset in non-local
mode. POSIX allows %Z to resolve to an empty string in case of missing
information.
Helped-by: Ulrich Mueller <ulm@gentoo.org>
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
b9c6232138 (--format=pretty: avoid calculating expensive expansions
twice) optimized adding short hashes multiple times by using the
fact that the output strbuf was only ever simply appended to and
copying the added string from the previous run. That prerequisite
is no longer given; we now have modfiers like %< and %+ that can
cause the cache to lose track of the correct offsets. Remove it.
Reported-by: Michael Giuffrida <michaelpg@chromium.org>
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git branch @" created refs/heads/@ as a branch, and in general the
code that handled @{-1} and @{upstream} was a bit too loose in
disambiguating.
* jk/interpret-branch-name:
checkout: restrict @-expansions when finding branch
strbuf_check_ref_format(): expand only local branches
branch: restrict @-expansions when deleting
t3204: test git-branch @-expansion corner cases
interpret_branch_name: allow callers to restrict expansions
strbuf_branchname: add docstring
strbuf_branchname: drop return value
interpret_branch_name: move docstring to header file
interpret_branch_name(): handle auto-namelen for @{-1}
|
|
An helper function to make it easier to append the result from
real_path() to a strbuf has been added.
* rs/strbuf-add-real-path:
strbuf: add strbuf_add_real_path()
cocci: use ALLOC_ARRAY
|
|
The interpret_branch_name() function converts names like
@{-1} and @{upstream} into branch names. The expanded ref
names are not fully qualified, and may be outside of the
refs/heads/ namespace (e.g., "@" expands to "HEAD", and
"@{upstream}" is likely to be in "refs/remotes/").
This is OK for callers like dwim_ref() which are primarily
interested in resolving the resulting name, no matter where
it is. But callers like "git branch" treat the result as a
branch name in refs/heads/. When we expand to a ref outside
that namespace, the results are very confusing (e.g., "git
branch @" tries to create refs/heads/HEAD, which is
nonsense).
Callers can't know from the returned string how the
expansion happened (e.g., did the user really ask for a
branch named "HEAD", or did we do a bogus expansion?). One
fix would be to return some out-parameters describing the
types of expansion that occurred. This has the benefit that
the caller can generate precise error messages ("I
understood @{upstream} to mean origin/master, but that is a
remote tracking branch, so you cannot create it as a local
name").
However, out-parameters make the function interface somewhat
cumbersome. Instead, let's do the opposite: let the caller
tell us which elements to expand. That's easier to pass in,
and none of the callers give more precise error messages
than "@{upstream} isn't a valid branch name" anyway (which
should be sufficient).
The strbuf_branchname() function needs a similar parameter,
as most of the callers access interpret_branch_name()
through it.
We can break the callers down into two groups:
1. Callers that are happy with any kind of ref in the
result. We pass "0" here, so they continue to work
without restrictions. This includes merge_name(),
the reflog handling in add_pending_object_with_path(),
and substitute_branch_name(). This last is what powers
dwim_ref().
2. Callers that have funny corner cases (mostly in
git-branch and git-checkout). These need to make use of
the new parameter, but I've left them as "0" in this
patch, and will address them individually in follow-on
patches.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This function and its companion, strbuf_check_branch_ref(),
did not have their purpose or semantics explained. Let's do
so.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The return value from strbuf_branchname() is confusing and
useless: it's 0 if the whole name was consumed by an @-mark,
but otherwise is the length of the original name we fed.
No callers actually look at the return value, so let's just
get rid of it.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add a function for appending the canonized absolute pathname of a given
path to a strbuf. It keeps the existing contents intact, as expected of
a function of the strbuf_add() family, while avoiding copying the result
if the given strbuf is empty. It's more consistent with the rest of the
strbuf API than strbuf_realpath(), which it's wrapping.
Also add a semantic patch demonstrating its intended usage and apply it
to the current tree. Using strbuf_add_real_path() instead of calling
strbuf_addstr() and real_path() avoids an extra copy to a static buffer.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Apply the semantic patch swap.cocci to convert hand-rolled swaps to use
the macro SWAP. The resulting code is shorter and easier to read, the
object code is effectively unchanged.
The patch for object.c had to be hand-edited in order to preserve the
comment before the change; Coccinelle tried to eat it for some reason.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When we add a new alternate to the list, we try to normalize
out any redundant "..", etc. However, we do not look at the
return value of normalize_path_copy(), and will happily
continue with a path that could not be normalized. Worse,
the normalizing process is done in-place, so we are left
with whatever half-finished working state the normalizing
function was in.
Fortunately, this cannot cause us to read past the end of
our buffer, as that working state will always leave the
NUL from the original path in place. And we do tend to
notice problems when we check is_directory() on the path.
But you can see the nonsense that we feed to is_directory
with an entry like:
this/../../is/../../way/../../too/../../deep/../../to/../../resolve
in your objects/info/alternates, which yields:
error: object directory
/to/e/deep/too/way//ects/this/../../is/../../way/../../too/../../deep/../../to/../../resolve
does not exist; check .git/objects/info/alternates.
We can easily fix this just by checking the return value.
But that makes it hard to generate a good error message,
since we're normalizing in-place and our input value has
been overwritten by cruft.
Instead, let's provide a strbuf helper that does an in-place
normalize, but restores the original contents on error. This
uses a second buffer under the hood, which is slightly less
efficient, but this is not a performance-critical code path.
The strbuf helper can also properly set the "len" parameter
of the strbuf before returning. Just doing:
normalize_path_copy(buf.buf, buf.buf);
will shorten the string, but leave buf.len at the original
length. That may be confusing to later code which uses the
strbuf.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Code cleanup.
* rs/use-strbuf-addbuf:
strbuf: avoid calling strbuf_grow() twice in strbuf_addbuf()
use strbuf_addbuf() for appending a strbuf to another
|
|
Code cleanup.
* rs/use-strbuf-addbuf:
strbuf: avoid calling strbuf_grow() twice in strbuf_addbuf()
use strbuf_addbuf() for appending a strbuf to another
|
|
Implement strbuf_addbuf() as a normal function in order to avoid calling
strbuf_grow() twice, with the second callinside strbud_add() being a
no-op. This is slightly faster and also reduces the text size a bit.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Minor doc update.
* pb/strbuf-read-file-doc:
strbuf: describe the return value of strbuf_read_file
|
|
* pb/strbuf-read-file-doc:
strbuf: describe the return value of strbuf_read_file
|
|
Mentored-by: Lars Schneider <larsxschneider@gmail.com>
Mentored-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Pranit Bauva <pranit.bauva@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
René Scharfe
Johannes Schindelin
Junio C Hamano
Dimitriy Ryazantcev
Matthew DeVore
Paul-Sebastian Ungureanu
Anders Waldenborg
Stefan Beller
Pratik Karki
Alban Gruin
Elijah Newren
brian m. carlson
Lars Schneider
Nguyễn Thái Ngọc Duy
Jonathan Nieder
Martin Ågren
Jeff King
Ævar Arnfjörð Bjarmason
Pranit Bauva