| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Split-index fix.
* nd/split-index-null-base-fix:
read-cache.c: fix writing "link" index ext with null base oid
|
|
Since commit 7db118303a (unpack_trees: fix breakage when o->src_index !=
o->dst_index - 2018-04-23) and changes in merge code to use separate
index_state for source and destination, when doing a merge with split
index activated, we may run into this line in unpack_trees():
o->result.split_index = init_split_index(&o->result);
This is by itself not wrong. But this split index information is not
fully populated (and it's only so when move_cache_to_base_index() is
called, aka force splitting the index, or loading index_state from a
file). Both "base_oid" and "base" in this case remain null.
So when writing the main index down, we link to this index with null
oid (default value after init_split_index()), which also means "no split
index" internally. This triggers an incorrect base index refresh:
warning: could not freshen shared index '.../sharedindex.0{40}'
This patch makes sure we will not refresh null base_oid (because the
file is never there). It also makes sure not to write "link" extension
with null base_oid in the first place (no point having it at
all). Read code already has protection against null base_oid.
There is also another side fix in remove_split_index() that causes a
crash when doing "git update-index --no-split-index" when base_oid in
the index file is null. In this case we will not load
istate->split_index->base but we dereference it anyway and are rewarded
with a segfault. This should not happen anymore, but it's still wrong to
dereference a potential NULL pointer, especially when we do check for
NULL pointer in the next code.
Reported-by: Luke Diamand <luke@diamand.org>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When marking cache entries for removal, and later removing them all at
once using 'remove_marked_cache_entries()', cache entries currently
have to be invalidated manually in the cache tree and in the untracked
cache.
Add an invalidate flag to the function. With the flag set, the
function will take care of invalidating the path in the cache tree and
in the untracked cache.
Note that the current callsites already do the invalidation properly
in other places, so we're just passing 0 from there to keep the status
quo.
This will be useful in a subsequent commit.
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When the split index feature is in use, then a cache entry is:
- either only present in the split index, in which case its 'index'
field must be 0,
- or it should refer to an existing entry in the shared index, i.e.
the 'index' field can't be greater than the size of the shared
index.
If a cache entry were to refer to a non-existing entry in the shared
index, then that's a sign of something being wrong in the index state,
either as a result of a bug in dealing with the split/shared index
entries, or perhaps a (potentially unrelated) memory corruption issue.
prepare_to_write_split_index() already has a condition to catch cache
entries with such bogus 'index' field, but instead of calling BUG() it
just sets cache entry's 'index = 0', and the entry will then be
written to the new split index.
Don't write a new index file from bogus index state, and call BUG()
upon encountering an cache entry referring to a non-existing shared
index entry.
Running the test suite repeatedly with 'GIT_TEST_SPLIT_INDEX=yes'
doesn't trigger this condition.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Ever since the split index feature was introduced [1], refreshing a
split index is prone to a variant of the classic racy git problem.
Consider the following sequence of commands updating the split index
when the shared index contains a racily clean cache entry, i.e. an
entry whose cached stat data matches with the corresponding file in
the worktree and the cached mtime matches that of the index:
echo "cached content" >file
git update-index --split-index --add file
echo "dirty worktree" >file # size stays the same!
# ... wait ...
git update-index --add other-file
Normally, when a non-split index is updated, then do_write_index()
(the function responsible for writing all kinds of indexes, "regular",
split, and shared) recognizes racily clean cache entries, and writes
them with smudged stat data, i.e. with file size set to 0. When
subsequent git commands read the index, they will notice that the
smudged stat data doesn't match with the file in the worktree, and
then go on to check the file's content and notice its dirtiness.
In the above example, however, in the second 'git update-index'
prepare_to_write_split_index() decides which cache entries stored only
in the shared index should be replaced in the new split index. Alas,
this function never looks out for racily clean cache entries, and
since the file's stat data in the worktree hasn't changed since the
shared index was written, it won't be replaced in the new split index.
Consequently, do_write_index() doesn't even get this racily clean
cache entry, and can't smudge its stat data. Subsequent git commands
will then see that the index has more recent mtime than the file and
that the (not smudged) cached stat data still matches with the file in
the worktree, and, ultimately, will erroneously consider the file
clean.
Modify prepare_to_write_split_index() to recognize racily clean cache
entries, and mark them to be added to the split index. Note that
there are two places where it should check raciness: first those cache
entries that are only stored in the shared index, and then those that
have been copied by unpack_trees() from the shared index while it
constructed a new index. This way do_write_index() will get these
racily clean cache entries as well, and will then write them with
smudged stat data to the new split index.
This change makes all tests in 't1701-racy-split-index.sh' pass, so
flip the two 'test_expect_failure' tests to success. Also add the '#'
(as in nr. of trial) to those tests' description that were omitted
when the tests expected failure.
Note that after this change if the index is split when it contains a
racily clean cache entry, then a smudged cache entry will be written
both to the new shared and to the new split indexes. This doesn't
affect regular git commands: as far as they are concerned this is just
an entry in the split index replacing an outdated entry in the shared
index. It did affect a few tests in 't1700-split-index.sh', though,
because they actually check which entries are stored in the split
index; a previous patch in this series has already made the necessary
adjustments in 't1700'. And racily clean cache entries and index
splitting are rare enough to not worry about the resulting duplicated
smudged cache entries, and the additional complexity required to
prevent them is not worth it.
Several tests failed occasionally when the test suite was run with
'GIT_TEST_SPLIT_INDEX=yes'. Here are those that I managed to trace
back to this racy split index problem, starting with those failing
more frequently, with a link to a failing Travis CI build job for
each. The highlighted line [2] shows when the racy file was written,
which is not always in the failing test but in a preceeding setup
test.
t3903-stash.sh:
https://travis-ci.org/git/git/jobs/385542084#L5858
t4024-diff-optimize-common.sh:
https://travis-ci.org/git/git/jobs/386531969#L3174
t4015-diff-whitespace.sh:
https://travis-ci.org/git/git/jobs/360797600#L8215
t2200-add-update.sh:
https://travis-ci.org/git/git/jobs/382543426#L3051
t0090-cache-tree.sh:
https://travis-ci.org/git/git/jobs/416583010#L3679
There might be others, e.g. perhaps 't1000-read-tree-m-3way.sh' and
others using 'lib-read-tree-m-3way.sh', but I couldn't confirm yet.
[1] In the branch leading to the merge commit v2.1.0-rc0~45 (Merge
branch 'nd/split-index', 2014-07-16).
[2] Note that those highlighted lines are in the 'after failure' fold,
and your browser might unhelpfully fold it up before you could
take a good look.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When unpack_trees() constructs a new index, it copies cache entries
from the original index [1]. prepare_to_write_split_index() has to
deal with this, and it has a dedicated code path for copied entries
that are present in the shared index, where it compares the cached
data in the corresponding copied and original entries. If the cached
data matches, then they are considered the same; if it differs, then
the copied entry will be marked for inclusion as a replacement entry
in the just about to be written split index by setting the
CE_UPDATE_IN_BASE flag.
However, a cache entry already has its CE_UPDATE_IN_BASE flag set upon
reading the split index, if the entry already has a replacement entry
there, or upon refreshing the cached stat data, if the corresponding
file was modified. The state of this flag is then preserved when
unpack_trees() copies a cache entry from the shared index.
So modify prepare_to_write_split_index() to check the copied cache
entries' CE_UPDATE_IN_BASE flag first, and skip the thorough
comparison of cached data if the flag is already set. Those couple of
lines comparing the cached data would then have too many levels of
indentation, so extract them into a helper function.
Note that comparing the cached data in copied and original entries in
the shared index might actually be entirely unnecessary. In theory
all code paths refreshing the cached stat data of an entry in the
shared index should set the CE_UPDATE_IN_BASE flag in that entry, and
unpack_trees() should preserve this flag when copying cache entries.
This means that the cached data is only ever changed if the
CE_UPDATE_IN_BASE flag is set as well. Our test suite seems to
confirm this: instrumenting the conditions in question and running the
test suite repeatedly with 'GIT_TEST_SPLIT_INDEX=yes' showed that the
cached data in a copied entry differs from the data in the shared
entry only if its CE_UPDATE_IN_BASE flag is indeed set.
In practice, however, our test suite doesn't have 100% coverage,
GIT_TEST_SPLIT_INDEX is inherently random, and I certainly can't claim
to possess complete understanding of what goes on in unpack_trees()...
Therefore I kept the comparison of the cached data when
CE_UPDATE_IN_BASE is not set, just in case that an unnoticed or future
code path were to accidentally miss setting this flag upon refreshing
the cached stat data or unpack_trees() were to drop this flag while
copying a cache entry.
[1] Note that when unpack_trees() constructs the new index and decides
that a cache entry should now refer to different content than what
was recorded in the original index (e.g. 'git read-tree -m
HEAD^'), then that can't really be considered a copy of the
original, but rather the creation of a new entry. Notably and
pertinent to the split index feature, such a new entry doesn't
have a reference to the original's shared index entry anymore,
i.e. its 'index' field is set to 0. Consequently, such an entry
is treated by prepare_to_write_split_index() as an entry not
present in the shared index and it will be added to the new split
index, while the original entry will be marked as deleted, and
neither the above discussion nor the changes in this patch apply
to them.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
'struct split_index' contains the field 'nr_deletions', whose name
with the 'nr_' prefix suggests that it contains the number of deleted
cache entries. However, barring its initialization to 0, this field
is only ever set to 1, indicating that there is at least one deleted
entry, but not the number of deleted entries. Luckily, this doesn't
cause any issues (other than confusing the reader, that is), because
the only place reading this field uses it in the same sense, i.e.: 'if
(si->nr_deletions)'.
To avoid confusion, we could either rename this field to something
like 'has_deletions' to make its name match its role, or make it a
counter of deleted cache entries to match its name.
Let's make it a counter, to keep it in sync with the related field
'nr_replacements', which does contain the number of replaced cache
entries. This will also give developers debugging the split index
code easy access to the number of deleted cache entries.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When reading large indexes from disk, a portion of the time is
dominated in malloc() calls. This can be mitigated by allocating a
large block of memory and manage it ourselves via memory pools.
This change moves the cache entry allocation to be on top of memory
pools.
Design:
The index_state struct will gain a notion of an associated memory_pool
from which cache_entries will be allocated from. When reading in the
index from disk, we have information on the number of entries and
their size, which can guide us in deciding how large our initial
memory allocation should be. When an index is discarded, the
associated memory_pool will be discarded as well - so the lifetime of
a cache_entry is tied to the lifetime of the index_state that it was
allocated for.
In the case of a Split Index, the following rules are followed. 1st,
some terminology is defined:
Terminology:
- 'the_index': represents the logical view of the index
- 'split_index': represents the "base" cache entries. Read from the
split index file.
'the_index' can reference a single split_index, as well as
cache_entries from the split_index. `the_index` will be discarded
before the `split_index` is. This means that when we are allocating
cache_entries in the presence of a split index, we need to allocate
the entries from the `split_index`'s memory pool. This allows us to
follow the pattern that `the_index` can reference cache_entries from
the `split_index`, and that the cache_entries will not be freed while
they are still being referenced.
Managing transient cache_entry structs:
Cache entries are usually allocated for an index, but this is not always
the case. Cache entries are sometimes allocated because this is the
type that the existing checkout_entry function works with. Because of
this, the existing code needs to handle cache entries associated with an
index / memory pool, and those that only exist transiently. Several
strategies were contemplated around how to handle this:
Chosen approach:
An extra field was added to the cache_entry type to track whether the
cache_entry was allocated from a memory pool or not. This is currently
an int field, as there are no more available bits in the existing
ce_flags bit field. If / when more bits are needed, this new field can
be turned into a proper bit field.
Alternatives:
1) Do not include any information about how the cache_entry was
allocated. Calling code would be responsible for tracking whether the
cache_entry needed to be freed or not.
Pro: No extra memory overhead to track this state
Con: Extra complexity in callers to handle this correctly.
The extra complexity and burden to not regress this behavior in the
future was more than we wanted.
2) cache_entry would gain knowledge about which mem_pool allocated it
Pro: Could (potentially) do extra logic to know when a mem_pool no
longer had references to any cache_entry
Con: cache_entry would grow heavier by a pointer, instead of int
We didn't see a tangible benefit to this approach
3) Do not add any extra information to a cache_entry, but when freeing a
cache entry, check if the memory exists in a region managed by existing
mem_pools.
Pro: No extra memory overhead to track state
Con: Extra computation is performed when freeing cache entries
We decided tracking and iterating over known memory pool regions was
less desirable than adding an extra field to track this stae.
Signed-off-by: Jameson Miller <jamill@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
It has been observed that the time spent loading an index with a large
number of entries is partly dominated by malloc() calls. This change
is in preparation for using memory pools to reduce the number of
malloc() calls made to allocate cahce entries when loading an index.
Add an API to allocate and discard cache entries, abstracting the
details of managing the memory backing the cache entries. This commit
does actually change how memory is managed - this will be done in a
later commit in the series.
This change makes the distinction between cache entries that are
associated with an index and cache entries that are not associated with
an index. A main use of cache entries is with an index, and we can
optimize the memory management around this. We still have other cases
where a cache entry is not persisted with an index, and so we need to
handle the "transient" use case as well.
To keep the congnitive overhead of managing the cache entries, there
will only be a single discard function. This means there must be enough
information kept with the cache entry so that we know how to discard
them.
A summary of the main functions in the API is:
make_cache_entry: create cache entry for use in an index. Uses specified
parameters to populate cache_entry fields.
make_empty_cache_entry: Create an empty cache entry for use in an index.
Returns cache entry with empty fields.
make_transient_cache_entry: create cache entry that is not used in an
index. Uses specified parameters to populate
cache_entry fields.
make_empty_transient_cache_entry: create cache entry that is not used in
an index. Returns cache entry with
empty fields.
discard_cache_entry: A single function that knows how to discard a cache
entry regardless of how it was allocated.
Signed-off-by: Jameson Miller <jamill@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Convert the base_sha1 member of struct split_index to use struct
object_id and rename it base_oid. Include cache.h to make the structure
visible.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Avoid using identifiers that clash with C++ keywords. Even though
it is not a goal to compile Git with C++ compilers, changes like
this help use of code analysis tools that targets C++ on our
codebase.
* bw/c-plus-plus: (37 commits)
replace: rename 'new' variables
trailer: rename 'template' variables
tempfile: rename 'template' variables
wrapper: rename 'template' variables
environment: rename 'namespace' variables
diff: rename 'template' variables
environment: rename 'template' variables
init-db: rename 'template' variables
unpack-trees: rename 'new' variables
trailer: rename 'new' variables
submodule: rename 'new' variables
split-index: rename 'new' variables
remote: rename 'new' variables
ref-filter: rename 'new' variables
read-cache: rename 'new' variables
line-log: rename 'new' variables
imap-send: rename 'new' variables
http: rename 'new' variables
entry: rename 'new' variables
diffcore-delta: rename 'new' variables
...
|
|
Rename C++ keyword in order to bring the codebase closer to being able
to be compiled with a C++ compiler.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In a96d3cc3f6 ("cache-tree: reject entries with null sha1", 2017-04-21)
we made sure that broken cache entries do not get propagated to new
trees. Part of that was making sure not to re-use an existing cache
tree that includes a null oid.
It did so by dropping the cache tree in 'do_write_index()' if one of
the entries contains a null oid. In split index mode however, there
are two invocations to 'do_write_index()', one for the shared index
and one for the split index. The cache tree is only written once, to
the split index.
As we only loop through the elements that are effectively being
written by the current invocation, that may not include the entry with
a null oid in the split index (when it is already written to the
shared index), where we write the cache tree. Therefore in split
index mode we may still end up writing the cache tree, even though
there is an entry with a null oid in the index.
Fix this by checking for null oids in prepare_to_write_split_index,
where we loop the entries of the shared index as well as the entries for
the split index.
This fixes t7009 with GIT_TEST_SPLIT_INDEX. Also add a new test that's
more specifically showing the problem.
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A common pattern to free a piece of memory and assign NULL to the
pointer that used to point at it has been replaced with a new
FREE_AND_NULL() macro.
* ab/free-and-null:
*.[ch] refactoring: make use of the FREE_AND_NULL() macro
coccinelle: make use of the "expression" FREE_AND_NULL() rule
coccinelle: add a rule to make "expression" code use FREE_AND_NULL()
coccinelle: make use of the "type" FREE_AND_NULL() rule
coccinelle: add a rule to make "type" code use FREE_AND_NULL()
git-compat-util: add a FREE_AND_NULL() wrapper around free(ptr); ptr = NULL
|
|
This reverts commit f9d7abec2ad2f9eb3d8873169cc28c34273df082;
see public-inbox.org/git/CAP8UFD0bOfzY-_hBDKddOcJdPUpP2KEVaX_SrCgvAMYAHtseiQ@mail.gmail.com
|
|
Replace occurrences of `free(ptr); ptr = NULL` which weren't caught by
the coccinelle rule. These fall into two categories:
- free/NULL assignments one after the other which coccinelle all put
on one line, which is functionally equivalent code, but very ugly.
- manually spotted occurrences where the NULL assignment isn't right
after the free() call.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When split-index is being used, we have two cache_entry arrays in
index_state->cache[] and index_state->split_index->base->cache[].
index_state->cache[] may share the same entries with base->cache[] so
we can quickly determine what entries are shared. This makes memory
management tricky, we can't free base->cache[] until we know
index_state->cache[] does not point to any of those entries.
unshare_split_index() is added for this purpose, to find shared
entries and either duplicate them in index_state->cache[], or discard
them. Either way it should be safe to free base->cache[] after
unshare_split_index().
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Also use the functions in cmd_update_index() in
builtin/update-index.c.
These functions will be used in a following commit to tweak
our use of the split-index feature depending on the setting
of a configuration variable.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add a semantic patch for converting certain calls of memcpy(3) to
COPY_ARRAY() and apply that transformation to the code base. The result
is
shorter and safer code. For now only consider calls where source and
destination have the same type, or in other words: easy cases.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Many instances of duplicate words (e.g. "the the path") and
a few typoes are fixed, originally in multiple patches.
wildmatch: fix duplicate words of "the"
t: fix duplicate words of "output"
transport-helper: fix duplicate words of "read"
Git.pm: fix duplicate words of "return"
path: fix duplicate words of "look"
pack-protocol.txt: fix duplicate words of "the"
precompose-utf8: fix typo of "sequences"
split-index: fix typo
worktree.c: fix typo
remote-ext: fix typo
utf8: fix duplicate words of "the"
git-cvsserver: fix duplicate words
Signed-off-by: Li Peng <lip@dtdream.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If you have a large work tree but only make changes in a subset, then
$GIT_DIR/index's size should be stable after a while. If you change
branches that touch something else, $GIT_DIR/index's size may grow
large that it becomes as slow as the unified index. Do --split-index
again occasionally to force all changes back to the shared index and
keep $GIT_DIR/index small.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We know the positions of replaced entries via the replace bitmap in
"link" extension, so the "name" path does not have to be stored (it's
still in the shared index). With this, we also have a way to
distinguish additions vs replacements at load time and can catch
broken "link" extensions.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We are sure that after merge_base_index() is done. cache-tree can
still be used with the final index. So don't destroy cache tree.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
CE_REMOVE'd entries are removed here because only parts of the code
base (unpack_trees in fact) test this bit when they look for the
presence of an entry. Leaving them may confuse the code ignores this
bit and expects to see a real entry.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
prepare_to_write_split_index() does the major work, classifying
deleted, updated and added entries. write_link_extension() then just
writes it down.
An observation is, deleting an entry, then adding it back is recorded
as "entry X is deleted, entry X is added", not "entry X is replaced".
This is simpler, with small overhead: a replaced entry is stored
without its path, a new entry is store with its path.
A note about unpack_trees() and the deduplication code inside
prepare_to_write_split_index(). Usually tracking updated/removed
entries via read-cache API is enough. unpack_trees() manipulates the
index in a different way: it throws the entire source index out,
builds up a new one, copying/duplicating entries (using dup_entry)
from the source index over if necessary, then returns the new index.
A naive solution would be marking the entire source index "deleted"
and add their duplicates as new. That could bring $GIT_DIR/index back
to the original size. So we try harder and memcmp() between the
original and the duplicate to see if it needs updating.
We could avoid memcmp() too, by avoiding duplicating the original
entry in dup_entry(). The performance gain this way is within noise
level and it complicates unpack-trees.c. So memcmp() is the preferred
way to deal with deduplication.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The large part of this patch just follows CE_ENTRY_CHANGED
marks. replace_index_entry() is updated to update
split_index->base->cache[] as well so base->cache[] does not reference
to a freed entry.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Entries that belong to the base index should not be freed. Mark
CE_REMOVE to track them.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This split-index mode is designed to keep write cost proportional to
the number of changes the user has made, not the size of the work
tree. (Read cost is another matter, to be dealt separately.)
This mode stores index info in a pair of $GIT_DIR/index and
$GIT_DIR/sharedindex.<SHA-1>. sharedindex is large and unchanged over
time while "index" is smaller and updated often. Format details are in
index-format.txt, although not everything is implemented in this
patch.
Shared indexes are not automatically removed, because it's unclear if
the shared index is needed by any (even temporary) indexes by just
looking at it. After a while you'll collect stale shared indexes. The
good news is one shared index is useable for long, until
$GIT_DIR/index becomes too big and sluggish that the new shared index
must be created.
The safest way to clean shared indexes is to turn off split index
mode, so shared files are all garbage, delete them all, then turn on
split index mode again.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
Junio C Hamano
Nguyễn Thái Ngọc Duy
Thomas Gummerer
SZEDER Gábor
Jameson Miller
brian m. carlson
Brandon Williams
Ævar Arnfjörð Bjarmason
Christian Couder
René Scharfe
Li Peng