| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Memory leaks in various codepaths have been plugged.
* ma/leakplugs:
pack-bitmap[-write]: use `object_array_clear()`, don't leak
object_array: add and use `object_array_pop()`
object_array: use `object_array_clear()`, not `free()`
leak_pending: use `object_array_clear()`, not `free()`
commit: fix memory leak in `reduce_heads()`
builtin/commit: fix memory leak in `prepare_index()`
|
|
Many codepaths did not diagnose write failures correctly when disks
go full, due to their misuse of write_in_full() helper function,
which have been corrected.
* jk/write-in-full-fix:
read_pack_header: handle signed/unsigned comparison in read result
config: flip return value of store_write_*()
notes-merge: use ssize_t for write_in_full() return value
pkt-line: check write_in_full() errors against "< 0"
convert less-trivial versions of "write_in_full() != len"
avoid "write_in_full(fd, buf, len) != len" pattern
get-tar-commit-id: check write_in_full() return against 0
config: avoid "write_in_full(fd, buf, len) < len" pattern
|
|
In a couple of places, we pop objects off an object array `foo` by
decreasing `foo.nr`. We access `foo.nr` in many places, but most if not
all other times we do so read-only, e.g., as we iterate over the array.
But when we change `foo.nr` behind the array's back, it feels a bit
nasty and looks like it might leak memory.
Leaks happen if the popped element has an allocated `name` or `path`.
At the moment, that is not the case. Still, 1) the object array might
gain more fields that want to be freed, 2) a code path where we pop
might start using names or paths, 3) one of these code paths might be
copied to somewhere where we do, and 4) using a dedicated function for
popping is conceptually cleaner.
Introduce and use `object_array_pop()` instead. Release memory in the
new function. Document that popping an object leaves the associated
elements in limbo.
The converted places were identified by grepping for "\.nr\>" and
looking for "--".
Make the new function return NULL on an empty array. This is consistent
with `pop_commit()` and allows the following:
while ((o = object_array_pop(&foo)) != NULL) {
// do something
}
But as noted above, we don't need to go out of our way to avoid reading
`foo.nr`. This is probably more readable:
while (foo.nr) {
... o = object_array_pop(&foo);
// do something
}
The name of `object_array_pop()` does not quite align with
`add_object_array()`. That is unfortunate. On the other hand, it matches
`object_array_clear()`. Arguably it's `add_...` that is the odd one out,
since it reads like it's used to "add" an "object array". For that
reason, side with `object_array_clear()`.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The return value of write_in_full() is either "-1", or the
requested number of bytes[1]. If we make a partial write
before seeing an error, we still return -1, not a partial
value. This goes back to f6aa66cb95 (write_in_full: really
write in full or return error on disk full., 2007-01-11).
So checking anything except "was the return value negative"
is pointless. And there are a couple of reasons not to do
so:
1. It can do a funny signed/unsigned comparison. If your
"len" is signed (e.g., a size_t) then the compiler will
promote the "-1" to its unsigned variant.
This works out for "!= len" (unless you really were
trying to write the maximum size_t bytes), but is a
bug if you check "< len" (an example of which was fixed
recently in config.c).
We should avoid promoting the mental model that you
need to check the length at all, so that new sites are
not tempted to copy us.
2. Checking for a negative value is shorter to type,
especially when the length is an expression.
3. Linus says so. In d34cf19b89 (Clean up write_in_full()
users, 2007-01-11), right after the write_in_full()
semantics were changed, he wrote:
I really wish every "write_in_full()" user would just
check against "<0" now, but this fixes the nasty and
stupid ones.
Appeals to authority aside, this makes it clear that
writing it this way does not have an intentional
benefit. It's a historical curiosity that we never
bothered to clean up (and which was undoubtedly
cargo-culted into new sites).
So let's convert these obviously-correct cases (this
includes write_str_in_full(), which is just a wrapper for
write_in_full()).
[1] A careful reader may notice there is one way that
write_in_full() can return a different value. If we ask
write() to write N bytes and get a return value that is
_larger_ than N, we could return a larger total. But
besides the fact that this would imply a totally broken
version of write(), it would already invoke undefined
behavior. Our internal remaining counter is an unsigned
size_t, which means that subtracting too many byte will
wrap it around to a very large number. So we'll instantly
begin reading off the end of the buffer, trying to write
gigabytes (or petabytes) of data.
Signed-off-by: Jeff King <peff@peff.net>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The previous commit taught the tempfile code to give up
ownership over tempfiles that have been renamed or deleted.
That makes it possible to use a stack variable like this:
struct tempfile t;
create_tempfile(&t, ...);
...
if (!err)
rename_tempfile(&t, ...);
else
delete_tempfile(&t);
But doing it this way has a high potential for creating
memory errors. The tempfile we pass to create_tempfile()
ends up on a global linked list, and it's not safe for it to
go out of scope until we've called one of those two
deactivation functions.
Imagine that we add an early return from the function that
forgets to call delete_tempfile(). With a static or heap
tempfile variable, the worst case is that the tempfile hangs
around until the program exits (and some functions like
setup_shallow_temporary rely on this intentionally, creating
a tempfile and then leaving it for later cleanup).
But with a stack variable as above, this is a serious memory
error: the variable goes out of scope and may be filled with
garbage by the time the tempfile code looks at it. Let's
see if we can make it harder to get this wrong.
Since many callers need to allocate arbitrary numbers of
tempfiles, we can't rely on static storage as a general
solution. So we need to turn to the heap. We could just ask
all callers to pass us a heap variable, but that puts the
burden on them to call free() at the right time.
Instead, let's have the tempfile code handle the heap
allocation _and_ the deallocation (when the tempfile is
deactivated and removed from the list).
This changes the return value of all of the creation
functions. For the cleanup functions (delete and rename),
we'll add one extra bit of safety: instead of taking a
tempfile pointer, we'll take a pointer-to-pointer and set it
to NULL after freeing the object. This makes it safe to
double-call functions like delete_tempfile(), as the second
call treats the NULL input as a noop. Several callsites
follow this pattern.
The resulting patch does have a fair bit of noise, as each
caller needs to be converted to handle:
1. Storing a pointer instead of the struct itself.
2. Passing the pointer instead of taking the struct
address.
3. Handling a "struct tempfile *" return instead of a file
descriptor.
We could play games to make this less noisy. For example, by
defining the tempfile like this:
struct tempfile {
struct heap_allocated_part_of_tempfile {
int fd;
...etc
} *actual_data;
}
Callers would continue to have a "struct tempfile", and it
would be "active" only when the inner pointer was non-NULL.
But that just makes things more awkward in the long run.
There aren't that many callers, so we can simply bite
the bullet and adjust all of them. And the compiler makes it
easy for us to find them all.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When close_tempfile() fails, we delete the tempfile and
reset the fields of the tempfile struct. This makes it
easier for callers to return without cleaning up, but it
also makes this common pattern:
if (close_tempfile(tempfile))
return error_errno("error closing %s", tempfile->filename.buf);
wrong, because the "filename" field has been reset after the
failed close. And it's not easy to fix, as in many cases we
don't have another copy of the filename (e.g., if it was
created via one of the mks_tempfile functions, and we just
have the original template string).
Let's drop the feature that a failed close automatically
deletes the file. This puts the burden on the caller to do
the deletion themselves, but this isn't that big a deal.
Callers which do:
if (write(...) || close_tempfile(...)) {
delete_tempfile(...);
return -1;
}
already had to call delete when the write() failed, and so
aren't affected. Likewise, any caller which just calls die()
in the error path is OK; we'll delete the tempfile during
the atexit handler.
Because this patch changes the semantics of close_tempfile()
without changing its signature, all callers need to be
manually checked and converted to the new scheme. This patch
covers all in-tree callers, but there may be others for
not-yet-merged topics. To catch these, we rename the
function to close_tempfile_gently(), which will attract
compile-time attention to new callers. (Technically the
original could be considered "gentle" already in that it
didn't die() on errors, but this one is even more so).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If close_tempfile() encounters an error, then it deletes the
tempfile and resets the "struct tempfile". But many code
paths ignore the return value and continue to use the
tempfile. Instead, we should generally treat this the same
as a write() error.
Note that in the postimage of some of these cases our error
message will be bogus after a failed close because we look
at tempfile->filename (either directly or via get_tempfile_path).
But after the failed close resets the tempfile object, this
is guaranteed to be the empty string. That will be addressed
in a future patch (because there are many more cases of the
same problem than just these instances).
Note also in the hunk in gpg-interface.c that it's fine to
call delete_tempfile() in the error path, even if
close_tempfile() failed and already deleted the file. The
tempfile code is smart enough to know the second deletion is
a noop.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The setup_temporary_shallow() function creates a temporary
file, but we never access the tempfile struct outside of the
function. This is OK, since it means we'll just clean up the
tempfile on exit. But we can simplify the code a bit by
moving the global tempfile struct to the only function in
which it's used.
Note that it must remain "static" due to tempfile.c's
requirement that tempfile storage never goes away until
program exit.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When there are no shallow entries to write, we skip creating
the tempfile entirely and try to return the empty string.
But we do so by calling get_tempfile_path() on the inactive
tempfile object. This will trigger an assertion that kills
the program. The bug was introduced by 6e122b449b
(setup_temporary_shallow(): use tempfile module,
2015-08-10). But nobody seems to have noticed since then
because we do not end up calling this function at all when
there are no shallow items. In other words, this code path
is completely unexercised.
Since the tempfile object is a static global, it _is_
possible that we call the function twice, writing out
shallow info the first time and then "reusing" our tempfile
object the second time. But:
1. It seems unlikely that this was the intent, as hitting
this code path would imply somebody clearing the
shallow_info list between calls.
And if somebody _did_ call the function multiple times
without clearing the shallow_info list, we'd hit a
different BUG for trying to reuse an already-active
tempfile.
2. I verified by code inspection that the function is only
called once per program. And also replacing this code
with a BUG() and running the test suite demonstrates
that it is not triggered there.
So we could probably just replace this with an assertion and
confirm that it's never called. However, the original intent
does seem to be that you _could_ call it when the
shallow_info is empty. And that's easy enough to do; since
the return value doesn't need to point to a writable buffer,
we can just return a string literal.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
With this patch, commit.h doesn't contain the string 'sha1' any more.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Code cleanup.
* rs/use-div-round-up:
use DIV_ROUND_UP
|
|
Convert code that divides and rounds up to use DIV_ROUND_UP to make the
intent clearer and reduce the number of magic constants.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Fix memory leaks pointed out by Coverity (and people).
* js/plug-leaks: (26 commits)
checkout: fix memory leak
submodule_uses_worktrees(): plug memory leak
show_worktree(): plug memory leak
name-rev: avoid leaking memory in the `deref` case
remote: plug memory leak in match_explicit()
add_reflog_for_walk: avoid memory leak
shallow: avoid memory leak
line-log: avoid memory leak
receive-pack: plug memory leak in update()
fast-export: avoid leaking memory in handle_tag()
mktree: plug memory leaks reported by Coverity
pack-redundant: plug memory leak
setup_discovered_git_dir(): plug memory leak
setup_bare_git_dir(): help static analysis
split_commit_in_progress(): simplify & fix memory leak
checkout: fix memory leak
cat-file: fix memory leak
mailinfo & mailsplit: check for EOF while parsing
status: close file descriptor after reading git-rebase-todo
difftool: address a couple of resource/memory leaks
...
|
|
Convert lookup_commit, lookup_commit_or_die,
lookup_commit_reference, and lookup_commit_reference_gently to take
struct object_id arguments.
Introduce a temporary in parse_object buffer in order to convert this
function. This is required since in order to convert parse_object and
parse_object_buffer, lookup_commit_reference_gently and
lookup_commit_or_die would need to be converted. Not introducing a
temporary would therefore require that lookup_commit_or_die take a
struct object_id *, but lookup_commit would take unsigned char *,
leaving a confusing and hard-to-use interface.
parse_object_buffer will lose this temporary in a later patch.
This commit was created with manual changes to commit.c, commit.h, and
object.c, plus the following semantic patch:
@@
expression E1, E2;
@@
- lookup_commit_reference_gently(E1.hash, E2)
+ lookup_commit_reference_gently(&E1, E2)
@@
expression E1, E2;
@@
- lookup_commit_reference_gently(E1->hash, E2)
+ lookup_commit_reference_gently(E1, E2)
@@
expression E1;
@@
- lookup_commit_reference(E1.hash)
+ lookup_commit_reference(&E1)
@@
expression E1;
@@
- lookup_commit_reference(E1->hash)
+ lookup_commit_reference(E1)
@@
expression E1;
@@
- lookup_commit(E1.hash)
+ lookup_commit(&E1)
@@
expression E1;
@@
- lookup_commit(E1->hash)
+ lookup_commit(E1)
@@
expression E1, E2;
@@
- lookup_commit_or_die(E1.hash, E2)
+ lookup_commit_or_die(&E1, E2)
@@
expression E1, E2;
@@
- lookup_commit_or_die(E1->hash, E2)
+ lookup_commit_or_die(E1, E2)
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
There are a small number of remaining callers of lookup_commit_reference
and lookup_commit_reference_gently that still need to be converted to
struct object_id. Convert these.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Convert register_shallow and unregister_shallow to take struct
object_id. register_shallow is a caller of lookup_commit, which we will
convert later. It doesn't make sense for the registration and
unregistration functions to have incompatible interfaces, so convert
them both.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Reported by Coverity.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Since this structure handles an array of object IDs, rename it to struct
oid_array. Also rename the accessor functions and the initialization
constant.
This commit was produced mechanically by providing non-Documentation
files to the following Perl one-liners:
perl -pi -E 's/struct sha1_array/struct oid_array/g'
perl -pi -E 's/\bsha1_array_/oid_array_/g'
perl -pi -E 's/SHA1_ARRAY_INIT/OID_ARRAY_INIT/g'
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Make the internal storage for struct sha1_array use an array of struct
object_id internally. Update the users of this struct which inspect its
internals.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Code cleanup in shallow boundary computation.
* nd/shallow-fixup:
shallow.c: remove useless code
shallow.c: bit manipulation tweaks
shallow.c: avoid theoretical pointer wrap-around
shallow.c: make paint_alloc slightly more robust
shallow.c: stop abusing COMMIT_SLAB_SIZE for paint_info's memory pools
shallow.c: rename fields in paint_info to better express their purposes
|
|
Some context before we talk about the removed code.
This paint_down() is part of step 6 of 58babff (shallow.c: the 8 steps
to select new commits for .git/shallow - 2013-12-05). When we fetch from
a shallow repository, we need to know if one of the new/updated refs
needs new "shallow commits" in .git/shallow (because we don't have
enough history of those refs) and which one.
The question at step 6 is, what (new) shallow commits are required in
other to maintain reachability throughout the repository _without_
cutting our history short? To answer, we mark all commits reachable from
existing refs with UNINTERESTING ("rev-list --not --all"), mark shallow
commits with BOTTOM, then for each new/updated refs, walk through the
commit graph until we either hit UNINTERESTING or BOTTOM, marking the
ref on the commit as we walk.
After all the walking is done, we check the new shallow commits. If we
have not seen any new ref marked on a new shallow commit, we know all
new/updated refs are reachable using just our history and .git/shallow.
The shallow commit in question is not needed and can be thrown away.
So, the code.
The loop here (to walk through commits) is basically
1. get one commit from the queue
2. ignore if it's SEEN or UNINTERESTING
3. mark it
4. go through all the parents and..
5a. mark it if it's never marked before
5b. put it back in the queue
What we do in this patch is drop step 5a because it is not
necessary. The commit being marked at 5a is put back on the queue, and
will be marked at step 3 at the next iteration. The only case it will
not be marked is when the commit is already marked UNINTERESTING (5a
does not check this), which will be ignored at step 2.
But we don't care about refs marking on UNINTERESTING. We care about the
marking on _shallow commits_ that are not reachable from our current
history (and having UNINTERESTING on it means it's reachable). So it's
ok for an UNINTERESTING not to be ref-marked.
Reported-by: Rasmus Villemoes <rv@rasmusvillemoes.dk>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
First of all, 1 << 31 is technically undefined behaviour, so let's just
use an unsigned literal.
If i is 'signed int' and gcc doesn't know that i is positive, gcc
generates code to compute the C99-mandated values of "i / 32" and "i %
32", which is a lot more complicated than simple a simple shifts/mask.
The only caller of paint_down actually passes an "unsigned int" value,
but the prototype of paint_down causes (completely well-defined)
conversion to signed int, and gcc has no way of knowing that the
converted value is non-negative. Just make the id parameter unsigned.
In update_refstatus, the change in generated code is much smaller,
presumably because gcc is smart enough to see that i starts as 0 and is
only incremented, so it is allowed (per the UD of signed overflow) to
assume that i is always non-negative. But let's just help less smart
compilers generate good code anyway.
Signed-off-by: Rasmus Villemoes <rv@rasmusvillemoes.dk>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The expression info->free+size is technically undefined behaviour in
exactly the case we want to test for. Moreover, the compiler is likely
to translate the expression to
(unsigned long)info->free + size > (unsigned long)info->end
where there's at least a theoretical chance that the LHS could wrap
around 0, giving a false negative.
This might as well be written using pointer subtraction avoiding these
issues.
Signed-off-by: Rasmus Villemoes <rv@rasmusvillemoes.dk>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
paint_alloc() allocates a big block of memory and splits it into
smaller, fixed size, chunks of memory whenever it's called. Each chunk
contains enough bits to present all "new refs" [1] in a fetch from a
shallow repository.
We do not check if the new "big block" is smaller than the requested
memory chunk though. If it happens, we'll happily pass back a memory
region smaller than expected. Which will lead to problems eventually.
A normal fetch may add/update a dozen new refs. Let's stay on the
"reasonably extreme" side and say we need 16k refs (or bits from
paint_alloc's perspective). Each chunk of memory would be 2k, much
smaller than the memory pool (512k).
So, normally, the under-allocation situation should never happen. A bad
guy, however, could make a fetch that adds more than 4m new/updated refs
to this code which results in a memory chunk larger than pool size.
Check this case and abort.
Noticed-by: Rasmus Villemoes <rv@rasmusvillemoes.dk>
Reviewed-by: Jeff King <peff@peff.net>
[1] Details are in commit message of 58babff (shallow.c: the 8 steps to
select new commits for .git/shallow - 2013-12-05), step 6.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We need to allocate a "big" block of memory in paint_alloc(). The exact
size does not really matter. But the pool size has no relation with
commit-slab. Stop using that macro here.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
paint_alloc() is basically malloc(), tuned for allocating a fixed number
of bits on every call without worrying about freeing any individual
allocation since all will be freed at the end. It does it by allocating
a big block of memory every time it runs out of "free memory". "slab" is
a poor choice of name, at least poorer than "pool".
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The smudge/clean filter API expect an external process is spawned
to filter the contents for each path that has a filter defined. A
new type of "process" filter API has been added to allow the first
request to run the filter for a path to spawn a single process, and
all filtering need is served by this single process for multiple
paths, reducing the process creation overhead.
* ls/filter-process:
contrib/long-running-filter: add long running filter example
convert: add filter.<driver>.process option
convert: prepare filter.<driver>.process option
convert: make apply_filter() adhere to standard Git error handling
pkt-line: add functions to read/write flush terminated packet streams
pkt-line: add packet_write_gently()
pkt-line: add packet_flush_gently()
pkt-line: add packet_write_fmt_gently()
pkt-line: extract set_packet_header()
pkt-line: rename packet_write() to packet_write_fmt()
run-command: add clean_on_exit_handler
run-command: move check_pipe() from write_or_die to run_command
convert: modernize tests
convert: quote filter names in error messages
|
|
packet_write() should be called packet_write_fmt() because it is a
printf-like function that takes a format string as first parameter.
packet_write_fmt() should be used for text strings only. Arbitrary
binary data should use a new packet_write() function that is introduced
in a subsequent patch.
Suggested-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Lars Schneider <larsxschneider@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The existing "git fetch --depth=<n>" option was hard to use
correctly when making the history of an existing shallow clone
deeper. A new option, "--deepen=<n>", has been added to make this
easier to use. "git clone" also learned "--shallow-since=<date>"
and "--shallow-exclude=<tag>" options to make it easier to specify
"I am interested only in the recent N months worth of history" and
"Give me only the history since that version".
* nd/shallow-deepen: (27 commits)
fetch, upload-pack: --deepen=N extends shallow boundary by N commits
upload-pack: add get_reachable_list()
upload-pack: split check_unreachable() in two, prep for get_reachable_list()
t5500, t5539: tests for shallow depth excluding a ref
clone: define shallow clone boundary with --shallow-exclude
fetch: define shallow boundary with --shallow-exclude
upload-pack: support define shallow boundary by excluding revisions
refs: add expand_ref()
t5500, t5539: tests for shallow depth since a specific date
clone: define shallow clone boundary based on time with --shallow-since
fetch: define shallow boundary with --shallow-since
upload-pack: add deepen-since to cut shallow repos based on time
shallow.c: implement a generic shallow boundary finder based on rev-list
fetch-pack: use a separate flag for fetch in deepening mode
fetch-pack.c: mark strings for translating
fetch-pack: use a common function for verbose printing
fetch-pack: use skip_prefix() instead of starts_with()
upload-pack: move rev-list code out of check_non_tip()
upload-pack: make check_non_tip() clean things up on error
upload-pack: tighten number parsing at "deepen" lines
...
|
|
The result of st_mult() is the same no matter the order of its
arguments. It invokes the macro unsigned_mult_overflows(), which
divides the second parameter by the first one. Pass constants
first to allow that division to be done already at compile time.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Instead of a custom commit walker like get_shallow_commits(), this new
function uses rev-list to mark NOT_SHALLOW to all reachable commits,
except borders. The definition of reachable is to be defined by the
protocol later. This makes it more flexible to define shallow boundary.
The way we find border is paint all reachable commits NOT_SHALLOW. Any
of them that "touches" commits without NOT_SHALLOW flag are considered
shallow (e.g. zero parents via grafting mechanism). Shallow commits and
their true parents are all marked SHALLOW. Then NOT_SHALLOW is removed
from shallow commits at the end.
There is an interesting observation. With a generic walker, we can
produce all kinds of shallow cutting. In the following graph, every
commit but "x" is reachable. "b" is a parent of "a".
x -- a -- o
/ /
x -- c -- b -- o
After this function is run, "a" and "c" are both considered shallow
commits. After grafting occurs at the client side, what we see is
a -- o
/
c -- b -- o
Notice that because of grafting, "a" has zero parents, so "b" is no
longer a parent of "a".
This is unfortunate and may be solved in two ways. The first is change
the way shallow grafting works and keep "a -- b" connection if "b"
exists and always ends at shallow commits (iow, no loose ends). This is
hard to detect, or at least not cheap to do.
The second way is mark one "x" as shallow commit instead of "a" and
produce this graph at client side:
x -- a -- o
/ /
c -- b -- o
More commits, but simpler grafting rules.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If our size computation overflows size_t, we may allocate a
much smaller buffer than we expected and overflow it. It's
probably impossible to trigger an overflow in most of these
sites in practice, but it is easy enough convert their
additions and multiplications into overflow-checking
variants. This may be fixing real bugs, and it makes
auditing the code easier.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Each of these cases can be converted to use ALLOC_ARRAY or
REALLOC_ARRAY, which has two advantages:
1. It automatically checks the array-size multiplication
for overflow.
2. It always uses sizeof(*array) for the element-size,
so that it can never go out of sync with the declared
type of the array.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Convert all instances of get_object_hash to use an appropriate reference
to the hash member of the oid member of struct object. This provides no
functional change, as it is essentially a macro substitution.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Jeff King <peff@peff.net>
|
|
struct object is one of the major data structures dealing with object
IDs. Convert it to use struct object_id instead of an unsigned char
array. Convert get_object_hash to refer to the new member as well.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Jeff King <peff@peff.net>
|
|
Convert most instances where the sha1 member of struct object is
dereferenced to use get_object_hash. Most instances that are passed to
functions that have versions taking struct object_id, such as
get_sha1_hex/get_oid_hex, or instances that can be trivially converted
to use struct object_id instead, are not converted.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Jeff King <peff@peff.net>
|
|
Code simplification.
* rs/pop-commit:
use pop_commit() for consuming the first entry of a struct commit_list
|
|
Remove no-longer used #include.
* tk/sigchain-unnecessary-post-tempfile:
shallow: remove unused #include "sigchain.h"
read-cache: remove unused #include "sigchain.h"
diff: remove unused #include "sigchain.h"
credential-cache--daemon: remove unused #include "sigchain.h"
|
|
Instead of open-coding the function pop_commit() just call it. This
makes the intent clearer and reduces code size.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
After switching to use the tempfile module in commit 6e122b44
(setup_temporary_shallow(): use tempfile module), no declarations from
sigchain.h are used in read-cache.c anymore. Thus, remove the #include.
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The "lockfile" API has been rebuilt on top of a new "tempfile" API.
* mh/tempfile:
credential-cache--daemon: use tempfile module
credential-cache--daemon: delete socket from main()
gc: use tempfile module to handle gc.pid file
lock_repo_for_gc(): compute the path to "gc.pid" only once
diff: use tempfile module
setup_temporary_shallow(): use tempfile module
write_shared_index(): use tempfile module
register_tempfile(): new function to handle an existing temporary file
tempfile: add several functions for creating temporary files
prepare_tempfile_object(): new function, extracted from create_tempfile()
tempfile: a new module for handling temporary files
commit_lock_file(): use get_locked_file_path()
lockfile: add accessor get_lock_file_path()
lockfile: add accessors get_lock_file_fd() and get_lock_file_fp()
create_bundle(): duplicate file descriptor to avoid closing it twice
lockfile: move documentation to lockfile.h and lockfile.c
|
|
One of the most common uses of git_path() is to pass a
constant, like git_path("MERGE_MSG"). This has two
drawbacks:
1. The return value is a static buffer, and the lifetime
is dependent on other calls to git_path, etc.
2. There's no compile-time checking of the pathname. This
is OK for a one-off (after all, we have to spell it
correctly at least once), but many of these constant
strings appear throughout the code.
This patch introduces a series of functions to "memoize"
these strings, which are essentially globals for the
lifetime of the program. We compute the value once, take
ownership of the buffer, and return the cached value for
subsequent calls. cache.h provides a helper macro for
defining these functions as one-liners, and defines a few
common ones for global use.
Using a macro is a little bit gross, but it does nicely
document the purpose of the functions. If we need to touch
them all later (e.g., because we learned how to change the
git_dir variable at runtime, and need to invalidate all of
the stored values), it will be much easier to have the
complete list.
Note that the shared-global functions have separate, manual
declarations. We could do something clever with the macros
(e.g., expand it to a declaration in some places, and a
declaration _and_ a definition in path.c). But there aren't
that many, and it's probably better to stay away from
too-magical macros.
Likewise, if we abandon the C preprocessor in favor of
generating these with a script, we could get much fancier.
E.g., normalizing "FOO/BAR-BAZ" into "git_path_foo_bar_baz".
But the small amount of saved typing is probably not worth
the resulting confusion to readers who want to grep for the
function's definition.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Change typedef each_ref_fn to take a "const struct object_id *oid"
parameter instead of "const unsigned char *sha1".
To aid this transition, implement an adapter that can be used to wrap
old-style functions matching the old typedef, which is now called
"each_ref_sha1_fn"), and make such functions callable via the new
interface. This requires the old function and its cb_data to be
wrapped in a "struct each_ref_fn_sha1_adapter", and that object to be
used as the cb_data for an adapter function, each_ref_fn_adapter().
This is an enormous diff, but most of it consists of simple,
mechanical changes to the sites that call any of the "for_each_ref"
family of functions. Subsequent to this change, the call sites can be
rewritten one by one to use the new interface.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Identify parts of the code that knows that we use SHA-1 hash to
name our objects too much, and use (1) symbolic constants instead
of hardcoded 20 as byte count and/or (2) use struct object_id
instead of unsigned char [20] for object names.
* bc/object-id:
apply: convert threeway_stage to object_id
patch-id: convert to use struct object_id
commit: convert parts to struct object_id
diff: convert struct combine_diff_path to object_id
bulk-checkin.c: convert to use struct object_id
zip: use GIT_SHA1_HEXSZ for trailers
archive.c: convert to use struct object_id
bisect.c: convert leaf functions to use struct object_id
define utility functions for object IDs
define a structure for object IDs
|
|
Convert struct commit_graft and necessary local parts of commit.c.
Also, convert several constants based on the hex length of an SHA-1 to
use GIT_SHA1_HEXSZ, and move several magic constants into variables for
readability.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git blame HEAD -- missing" failed to correctly say "HEAD" when it
tried to say "No such path 'missing' in HEAD".
* jk/blame-commit-label:
blame.c: fix garbled error message
use xstrdup_or_null to replace ternary conditionals
builtin/commit.c: use xstrdup_or_null instead of envdup
builtin/apply.c: use xstrdup_or_null instead of null_strdup
git-compat-util: add xstrdup_or_null helper
|
|
Mark file-local symbols as "static", and drop functions that nobody
uses.
* jc/unused-symbols:
shallow.c: make check_shallow_file_for_update() static
remote.c: make clear_cas_option() static
urlmatch.c: make match_urls() static
revision.c: make save_parents() and free_saved_parents() static
line-log.c: make line_log_data_init() static
pack-bitmap.c: make pack_bitmap_filename() static
prompt.c: remove git_getpass() nobody uses
http.c: make finish_active_slot() and handle_curl_result() static
|
Junio C Hamano
Martin Ågren
Jeff King
Stefan Beller
René Scharfe
brian m. carlson
Johannes Schindelin
Nguyễn Thái Ngọc Duy
Rasmus Villemoes
Lars Schneider
Tobias Klauser
Michael Haggerty