| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Also submitted upstream at:
https://github.com/cr-marcstevens/sha1collisiondetection/pull/52
Reported-by: Jens Schleusener <Jens.Schleusener@fossies.org>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Update sha1dc from the latest version by the upstream
maintainer[1]. See 07a20f569b ("Makefile: fix unaligned loads in
sha1dc with UBSan", 2019-03-12) for the last update.
This fixes an issue where HP-UX IA64 was wrongly detected as a
Little-endian instead of a Big-endian system, see [2] and [3].
1. https://github.com/cr-marcstevens/sha1collisiondetection/commit/855827c583bc30645ba427885caa40c5b81764d2
2. https://public-inbox.org/git/603989bd-f86d-c61d-c6f5-fb6748a65ba9@siemens.com/
3. https://github.com/cr-marcstevens/sha1collisiondetection/pull/50
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The sha1dc library uses unaligned loads on platforms that support them.
This is normally what you'd want for performance, but it does cause
UBSan to complain when we compile with SANITIZE=undefined. Just like we
set -DNO_UNALIGNED_LOADS for our own code in that case, we should set
-DSHA1DC_FORCE_ALIGNED_ACCESS.
Of course that does nothing without pulling in the patches from sha1dc
to respect that define. So let's do that, too, updating both the
submodule link and our in-tree copy (from the same commit).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Update sha1dc from the latest version by the upstream
maintainer[1]. See 2db87328ef ("Merge branch 'ab/sha1dc'", 2017-07-10)
for the last update.
This fixes an issue where AIX was wrongly detected as a Little-endian
instead of a Big-endian system. See [2][3][4].
1. https://github.com/cr-marcstevens/sha1collisiondetection/commit/232357eb2ea0397388254a4b188333a227bf5b10
2. https://github.com/cr-marcstevens/sha1collisiondetection/pull/45
3. https://github.com/cr-marcstevens/sha1collisiondetection/pull/42
4. https://public-inbox.org/git/20180729200623.GF945730@genre.crustytoothpaste.net/
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Update the sha1dc again to fix portability glitches.
* ab/sha1dc-maint:
sha1dc: update from upstream
|
|
Update sha1dc from the latest version by the upstream maintainer[1].
See commit 6b851e536b ("sha1dc: update from upstream", 2017-06-06) for
the last update.
This solves the Big Endian detection on Solaris reported against
v2.13.2[2], hopefully without any regressions. A version of this has
been tested on two Solaris SPARC installations, Cygwin (by jturney on
cygwin@Freenode), and on numerous more boring systems (mainly
linux/x86_64). See [3] for a discussion of the implementation and
platform-specific issues.
See commit a0103914c2 ("sha1dc: update from upstream", 2017-05-20) and
6b851e536b ("sha1dc: update from upstream", 2017-06-06) for previous
attempts in the 2.13 series to address various compile-time feature
detection in this library.
1. https://github.com/cr-marcstevens/sha1collisiondetection/commit/19d97bf5af05312267c2e874ee6bcf584d9e9681
2. <CAKKM46tHq13XiW5C8sux3=PZ1VHSu_npG8ExfWwcPD7rkZkyRQ@mail.gmail.com>
(https://public-inbox.org/git/CAKKM46tHq13XiW5C8sux3=PZ1VHSu_npG8ExfWwcPD7rkZkyRQ@mail.gmail.com/)
3. https://github.com/cr-marcstevens/sha1collisiondetection/pull/34
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Ville Skyttä <ville.skytta@iki.fi>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Update sha1dc from the latest version by the upstream
maintainer[1].
See commit a0103914c2 ("sha1dc: update from upstream", 2017-05-20) for
the latest update. That update was done sans some whitespace changes
by upstream, which is why the diff here isn't the same as the upstream
cc46554..e139984.
It also brings in a change[2] upstream made which should hopefully
address the breakage in 2.13.1 on Cygwin, see [3]. Cygwin defines both
_BIG_ENDIAN and _LITTLE_ENDIAN.
Adam Dinwoodie reports on the mailing list that that upstream commit
fixes the issue on Cygwin[4].
1. https://github.com/cr-marcstevens/sha1collisiondetection/commit/e1399840b501a68ac6c8d7ed9a5cb1455480200e
2. https://github.com/cr-marcstevens/sha1collisiondetection/commit/a24eef58c0684078405f8c7a89f9b78271432005
3. <20170606100355.GC25777@dinwoodie.org> (https://public-inbox.org/git/20170606100355.GC25777@dinwoodie.org/)
4. <20170606124323.GD25777@dinwoodie.org> (https://public-inbox.org/git/20170606124323.GD25777@dinwoodie.org/)
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The upstream sha1dc code indents some lines with spaces.
While this doesn't match Git's coding guidelines, it's better
to leave this imported code untouched than to try to make it
match our style. However, we can use .gitattributes to tell
"diff --check" and "git am" not to bother us about it.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Update sha1dc from the latest version by the upstream
maintainer[1].
This version includes a commit of mine which allows for replacing the
local modifications done to the upstream files in git.git with macro
definitions to monkeypatch it in place.
It also brings in a change[2] upstream made for the breakage 2.13.0
introduced on SPARC and other platforms that forbid unaligned
access[3].
This means that the code customizations done since the initial import
in commit 28dc98e343 ("sha1dc: add collision-detecting sha1
implementation", 2017-03-16) can be done purely via Makefile
definitions and by including the content of our own sha1dc_git.[ch] in
sha1dc/sha1.c via a macro.
1. https://github.com/cr-marcstevens/sha1collisiondetection/commit/cc465543b310e5f59a1d534381690052e8509b22
2. https://github.com/cr-marcstevens/sha1collisiondetection/commit/33a694a9ee1b79c24be45f9eab5ac0e1aeeaf271
3. "Git 2.13.0 segfaults on Solaris SPARC due to DC_SHA1=YesPlease
being on by default"
(https://public-inbox.org/git/CACBZZX6nmKK8af0-UpjCKWV4R+hV-uk2xWXVA5U+_UQ3VXU03g@mail.gmail.com/)
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In an early part of sha1dc/sha1.c, the code checks the endianness of
the target platform by inspecting common CPP macros defined on
big-endian boxes, and sets BIGENDIAN macro to 1. If these common
CPP macros are not defined, the code declares that the target
platform is little endian and does nothing (most notably, it does
not #undef its BIGENDIAN macro).
The code that does so even has this comment
Note that all MSFT platforms are little endian,
so none of these will be defined under the MSC compiler.
and later, the defined-ness of the BIGENDIAN macro is used to switch
the implementation of sha1_load() macro.
One thing the code did not anticipate is that somebody might define
BIGENDIAN macro in some header it includes to 0 on a little-endian
target platform. Because the auto-detection based on common macros
do not touch BIGENDIAN macro when it detects a little-endian target,
such a definition is still valid and then defined-ness test will say
"Ah, BIGENDIAN is defined" and takes the wrong sha1_load().
As this auto-detection logic pretends as if it owns the BIGENDIAN
macro by ignoring the setting that may come from the outside and by
not explicitly unsetting when it decides that it is working for a
little-endian target, solve this problem without breaking that
assumption. Namely, we can rename BIGENDIAN this code uses to
something much less generic, i.e. SHA1DC_BIGENDIAN. For extra
protection, undef the macro on a little-endian target.
It is possible to work it around by instead #undef BIGENDIAN in
the auto-detection code, but a macro (or include) that happens later
in the code can be implemented in terms of BIGENDIAN on Windows and
it is possible that the implementation gets upset when it sees the
CPP macro undef'ed (instead of set to 0). Renaming the private macro
intended to be used only in this file to a less generic name relieves
us from having to worry about that kind of breakage.
Noticed-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This knob lets you use the sha1dc implementation from:
https://github.com/cr-marcstevens/sha1collisiondetection
which can detect certain types of collision attacks (even
when we only see half of the colliding pair). So it
mitigates any attack which consists of getting the "good"
half of a collision into a trusted repository, and then
later replacing it with the "bad" half. The "good" half is
rejected by the victim's version of Git (and even if they
run an old version of Git, any sha1dc-enabled git will
complain loudly if it ever has to interact with the object).
The big downside is that it's slower than either the openssl
or block-sha1 implementations.
Here are some timings based off of linux.git:
- compute sha1 over whole packfile
sha1dc: 3.580s
blk-sha1: 2.046s (-43%)
openssl: 1.335s (-62%)
- rev-list --all --objects
sha1dc: 33.512s
blk-sha1: 33.514s (+0.0%)
openssl: 33.650s (+0.4%)
- git log --no-merges -10000 -p
sha1dc: 8.124s
blk-sha1: 7.986s (-1.6%)
openssl: 8.203s (+0.9%)
- index-pack --verify
sha1dc: 4m19s
blk-sha1: 2m57s (-32%)
openssl: 2m19s (-42%)
So overall the sha1 computation with collision detection is
about 1.75x slower than block-sha1, and 2.7x slower than
sha1. But of course most operations do more than just sha1.
Normal object access isn't really slowed at all (both the
+/- changes there are well within the run-to-run noise); any
changes are drowned out by the other work Git is doing.
The most-affected operation is `index-pack --verify`, which
is essentially just computing the sha1 on every object. This
is similar to the `index-pack` invocation that the receiver
of a push or fetch would perform. So clearly there's some
extra CPU load here.
There will also be some latency for the user, though keep in
mind that such an operation will generally be network bound
(this is about a 1.2GB packfile). Some of that extra CPU is
"free" in the sense that we use it while the pack is
streaming in anyway. But most of it comes during the
delta-resolution phase, after the whole pack has been
received. So we can imagine that for this (quite large)
push, the user might have to wait an extra 100 seconds over
openssl (which is what we use now). If we assume they can
push to us at 20Mbit/s, that's 480s for a 1.2GB pack, which
is only 20% slower.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The safe_hash feature is designed to make sha1dc a drop-in
replacement for sha1, where colliding entries will get a
permuted hash to un-collide them. However, since we're
handling the collision case ourselves, this isn't helpful
(and is actually harmful, as it means you get the wrong
object id if you want to show it in a log message).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We can replace system includes with git-compat-util.h or
cache.h (and should make sure it is included first in all C
files). And we can drop includes from headers entirely, as
every C file should include git-compat-util.h itself.
We will add in new include guards around the header files,
though (otherwise you get into trouble including both
sha1dc/sha1.h and cache.h).
And finally, we'll use the full "sha1dc/" path for including
related files. This isn't strictly necessary, but makes the
expected resolution more obvious.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This is pulled straight from:
https://github.com/cr-marcstevens/sha1collisiondetection
with no modifications yet (though I've pulled in only the
subset of files necessary for Git to use).
This is commit 007905a93c973f55b2daed6585f9f6c23545bf66.
Further updates can be done like:
git checkout -b vendor-sha1dc $this_commit
cp /path/to/sha1dc/{LICENSE.txt,lib/*} sha1dc/
git add -A sha1dc
git commit -m "update sha1dc"
git checkout -b update-sha1dc origin
git merge vendor-sha1dc
Thanks to both Marc and Dan for making the code fit our
needs by doing both optimization work, cutting down on the
object size, and doing some syntactic changes to work better
with git. And to Linus for kicking off the "diet" work that
removed some of the unused code.
The license of the sha1dc code is the MIT license, which is
obviously compatible with the GPLv2 of git.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
Elijah Newren
Ævar Arnfjörð Bjarmason
Jeff King
Junio C Hamano
Ville Skyttä