| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Change the revision parsing logic to match @{upstream}, @{u} & @{push}
case-insensitively.
Before this change supplying anything except the lower-case forms
emits an "unknown revision or path not in the working tree"
error. This change makes upper-case & mixed-case versions equivalent
to the lower-case versions.
The use-case for this is being able to hold the shift key down while
typing @{u} on certain keyboard layouts, which makes the sequence
easier to type, and reduces cases where git throws an error at the
user where it could do what he means instead.
These suffixes now join various other suffixes & special syntax
documented in gitrevisions(7) that matches case-insensitively. A table
showing the status of the various forms documented there before &
after this patch is shown below. The key for the table is:
- CI = Case Insensitive
- CIP = Case Insensitive Possible (without ambiguities)
- AG = Accepts Garbage (.e.g. @{./.4.minutes./.})
Before this change:
|----------------+-----+------+-----|
| What? | CI? | CIP? | AG? |
|----------------+-----+------+-----|
| @{<date>} | Y | Y | Y |
| @{upstream} | N | Y | N |
| @{push} | N | Y | N |
|----------------+-----+------+-----|
After it:
|----------------+-----+------+-----|
| What? | CI? | CIP? | AG? |
|----------------+-----+------+-----|
| @{<date>} | Y | Y | Y |
| @{upstream} | Y | Y | N |
| @{push} | Y | Y | N |
|----------------+-----+------+-----|
The ^{<type>} suffix is not made case-insensitive, because other
places that take <type> like "cat-file -t <type>" do want them case
sensitively (after all we never declared that type names are case
insensitive). Allowing case-insensitive typename only with this syntax
will make the resulting Git as a whole inconsistent.
This change was independently authored to scratch a longtime itch, but
when I was about to submit it I discovered that a similar patch had
been submitted unsuccessfully before by Conrad Irwin in August 2011 as
"rev-parse: Allow @{U} as a synonym for
@{u}" (<1313287071-7851-1-git-send-email-conrad.irwin@gmail.com>).
The tests for this patch are more exhaustive than in the 2011
submission. The starting point for them was to first change the code
to only support upper-case versions of the existing words, seeing what
broke, and amending the breaking tests to check upper case & mixed
case as appropriate, and where not redundant to other similar
tests. The implementation itself is equivalent.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"uchar [40]" to "struct object_id" conversion continues.
* bc/object-id:
wt-status: convert to struct object_id
builtin/merge-base: convert to struct object_id
Convert object iteration callbacks to struct object_id
sha1_file: introduce an nth_packed_object_oid function
refs: simplify parsing of reflog entries
refs: convert each_reflog_ent_fn to struct object_id
reflog-walk: convert struct reflog_info to struct object_id
builtin/replace: convert to struct object_id
Convert remaining callers of resolve_refdup to object_id
builtin/merge: convert to struct object_id
builtin/clone: convert to struct object_id
builtin/branch: convert to struct object_id
builtin/grep: convert to struct object_id
builtin/fmt-merge-message: convert to struct object_id
builtin/fast-export: convert to struct object_id
builtin/describe: convert to struct object_id
builtin/diff-tree: convert to struct object_id
builtin/commit: convert to struct object_id
hex: introduce parse_oid_hex
|
|
This function asks strbuf_branchname() to expand any @-marks
in the branchname, and then we blindly stick refs/heads/ in
front of the result. This is obviously nonsense if the
expansion is "HEAD" or a ref in refs/remotes/.
The most obvious end-user effect is that creating or
renaming a branch with an expansion may have confusing
results (e.g., creating refs/heads/origin/master from
"@{upstream}" when the operation should be disallowed).
We can fix this by telling strbuf_branchname() that we are
only interested in local expansions. Any unexpanded bits are
then fed to check_ref_format(), which either disallows them
(in the case of "@{upstream}") or lets them through
("refs/heads/@" is technically valid, if a bit silly).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The interpret_branch_name() function converts names like
@{-1} and @{upstream} into branch names. The expanded ref
names are not fully qualified, and may be outside of the
refs/heads/ namespace (e.g., "@" expands to "HEAD", and
"@{upstream}" is likely to be in "refs/remotes/").
This is OK for callers like dwim_ref() which are primarily
interested in resolving the resulting name, no matter where
it is. But callers like "git branch" treat the result as a
branch name in refs/heads/. When we expand to a ref outside
that namespace, the results are very confusing (e.g., "git
branch @" tries to create refs/heads/HEAD, which is
nonsense).
Callers can't know from the returned string how the
expansion happened (e.g., did the user really ask for a
branch named "HEAD", or did we do a bogus expansion?). One
fix would be to return some out-parameters describing the
types of expansion that occurred. This has the benefit that
the caller can generate precise error messages ("I
understood @{upstream} to mean origin/master, but that is a
remote tracking branch, so you cannot create it as a local
name").
However, out-parameters make the function interface somewhat
cumbersome. Instead, let's do the opposite: let the caller
tell us which elements to expand. That's easier to pass in,
and none of the callers give more precise error messages
than "@{upstream} isn't a valid branch name" anyway (which
should be sufficient).
The strbuf_branchname() function needs a similar parameter,
as most of the callers access interpret_branch_name()
through it.
We can break the callers down into two groups:
1. Callers that are happy with any kind of ref in the
result. We pass "0" here, so they continue to work
without restrictions. This includes merge_name(),
the reflog handling in add_pending_object_with_path(),
and substitute_branch_name(). This last is what powers
dwim_ref().
2. Callers that have funny corner cases (mostly in
git-branch and git-checkout). These need to make use of
the new parameter, but I've left them as "0" in this
patch, and will address them individually in follow-on
patches.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The return value from strbuf_branchname() is confusing and
useless: it's 0 if the whole name was consumed by an @-mark,
but otherwise is the length of the original name we fed.
No callers actually look at the return value, so let's just
get rid of it.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We generally put docstrings with function declarations,
because it's the callers who need to know how the function
works. Let's do so for interpret_branch_name().
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The interpret_branch_name() function takes a ptr/len pair
for the name, but you can pass "0" for "namelen", which will
cause it to check the length with strlen().
However, before we do that auto-namelen magic, we call
interpret_nth_prior_checkout(), which gets fed the bogus
"0". This was broken by 8cd4249c4 (interpret_branch_name:
always respect "namelen" parameter, 2014-01-15). Though to
be fair to that commit, it was broken in the _opposite_
direction before, where we would always treat "name" as a
string even if a length was passed.
You can see the bug with "git log -g @{-1}". That code path
always passes "0", and without this patch it cannot figure
out which branch's reflog to show.
We can fix it by a small reordering of the code.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Make each_reflog_ent_fn take two struct object_id pointers instead of
two pointers to unsigned char. Convert the various callbacks to use
struct object_id as well. Also, rename fsck_handle_reflog_sha1 to
fsck_handle_reflog_oid.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A small code cleanup.
* jk/no-looking-at-dotgit-outside-repo:
sha1_name: make wraparound of the index into ring-buffer explicit
|
|
Overflow is defined for unsigned integers, but not for signed ones.
Wrap around explicitly for the new ring-buffer in find_unique_abbrev()
as we did in bb84735c for the ones in sha1_to_hex() and get_pathname(),
thus avoiding signed overflows and getting rid of the magic number 3.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Update "git diff --no-index" codepath not to try to peek into .git/
directory that happens to be under the current directory, when we
know we are operating outside any repository.
* jk/no-looking-at-dotgit-outside-repo:
diff: handle sha1 abbreviations outside of repository
diff_aligned_abbrev: use "struct oid"
diff_unique_abbrev: rename to diff_aligned_abbrev
find_unique_abbrev: use 4-buffer ring
test-*-cache-tree: setup git dir
read info/{attributes,exclude} only when in repository
|
|
Updates the way approximate count of total objects is computed
while attempting to come up with a unique abbreviated object name,
which in turn needs to estimate how many hexdigits are necessary to
ensure uniqueness.
* jk/abbrev-auto:
find_unique_abbrev: move logic out of get_short_sha1()
|
|
Allow the default abbreviation length, which has historically been
7, to scale as the repository grows. The logic suggests to use 12
hexdigits for the Linux kernel, and 9 to 10 for Git itself.
* lt/abbrev-auto:
abbrev: auto size the default abbreviation
abbrev: prepare for new world order
abbrev: add FALLBACK_DEFAULT_ABBREV to prepare for auto sizing
|
|
Some code paths want to format multiple abbreviated sha1s in
the same output line. Because we use a single static buffer
for our return value, they have to either break their output
into several calls or allocate their own arrays and use
find_unique_abbrev_r().
Intead, let's mimic sha1_to_hex() and use a ring of several
buffers, so that the return value stays valid through
multiple calls. This shortens some of the callers, and makes
it harder to for them to make a silly mistake.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Codepaths involved in interacting alternate object store have
been cleaned up.
* jk/alt-odb-cleanup:
alternates: use fspathcmp to detect duplicates
sha1_file: always allow relative paths to alternates
count-objects: report alternates via verbose mode
fill_sha1_file: write into a strbuf
alternates: store scratch buffer as strbuf
fill_sha1_file: write "boring" characters
alternates: use a separate scratch space
alternates: encapsulate alt->base munging
alternates: provide helper for allocating alternate
alternates: provide helper for adding to alternates list
link_alt_odb_entry: refactor string handling
link_alt_odb_entry: handle normalize_path errors
t5613: clarify "too deep" recursion tests
t5613: do not chdir in main process
t5613: whitespace/style cleanups
t5613: use test_must_fail
t5613: drop test_valid_repo function
t5613: drop reachable_via function
|
|
We pre-size the scratch buffer to hold a loose object
filename of the form "xx/yyyy...", which leads to allocation
code that is hard to verify. We have to use some magic
numbers during the initial allocation, and then writers must
blindly assume that the buffer is big enough. Using a strbuf
makes it more clear that we cannot overflow.
Unfortunately, we do still need some magic numbers to grow
our strbuf before calling fill_sha1_path(), but the strbuf
growth is much closer to the point of use. This makes it
easier to see that it's correct, and opens the possibility
of pushing it even further down if fill_sha1_path() learns
to work on strbufs.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The alternate_object_database struct uses a single buffer
both for storing the path to the alternate, and as a scratch
buffer for forming object names. This is efficient (since
otherwise we'd end up storing the path twice), but it makes
life hard for callers who just want to know the path to the
alternate. They have to remember to stop reading after
"alt->name - alt->base" bytes, and to subtract one for the
trailing '/'.
It would be much simpler if they could simply access a
NUL-terminated path string. We could encapsulate this in a
function which puts a NUL in the scratch buffer and returns
the string, but that opens up questions about the lifetime
of the result. The first time another caller uses the
alternate, the scratch buffer may get other data tacked onto
it.
Let's instead just store the root path separately from the
scratch buffer. There aren't enough alternates being stored
for the duplicated data to matter for performance, and this
keeps things simple and safe for the callers.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Allocating a struct alternate_object_database is tricky, as
we must over-allocate the buffer to provide scratch space,
and then put in particular '/' and NUL markers.
Let's encapsulate this in a function so that the complexity
doesn't leak into callers (and so that we can modify it
later).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The get_short_sha1() is only about reading short sha1s; we
do call it in a loop to check "is this long enough" for each
object, but otherwise it should not need to know about
things like our default_abbrev setting.
So instead of asking it to set default_automatic_abbrev as a
side-effect, let's just have find_unique_abbrev() pick the
right place to start its loop. This requires a separate
approximate_object_count() function, but that naturally
belongs with the rest of sha1_file.c.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In fairly early days we somehow decided to abbreviate object names
down to 7-hexdigits, but as projects grow, it is becoming more and
more likely to see such a short object names made in earlier days
and recorded in the log messages no longer unique.
Currently the Linux kernel project needs 11 to 12 hexdigits, while
Git itself needs 10 hexdigits to uniquely identify the objects they
have, while many smaller projects may still be fine with the
original 7-hexdigit default. One-size does not fit all projects.
Introduce a mechanism, where we estimate the number of objects in
the repository upon the first request to abbreviate an object name
with the default setting and come up with a sane default for the
repository. Based on the expectation that we would see collision in
a repository with 2^(2N) objects when using object names shortened
to first N bits, use sufficient number of hexdigits to cover the
number of objects in the repository. Each hexdigit (4-bits) we add
to the shortened name allows us to have four times (2-bits) as many
objects in the repository.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When we find ambiguous short sha1s, we may get a
disambiguation rule from our caller's context. But if we
don't, we fall back to treating all sha1s the same, even
though most projects will tend to refer only to commits by
their short sha1s.
This patch introduces a configuration option that lets the
user pick a different fallback (e.g., only commits). It's
possible that we may want to make this the default, but it's
a good idea to start as a config option for two reasons:
1. It lets people experiment with this and see if it's a
good idea (i.e., the "tend to" above is an assumption;
we don't really know if this will break some obscure
cases).
2. Even if we do flip the default, it gives people an
escape hatch if it causes problems (you can sometimes
override it by asking for "1234^{tree}", but not all
combinations are possible).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When the user gives us an ambiguous short sha1, we print an
error and refuse to resolve it. In some cases, the next step
is for them to feed us more characters (e.g., if they were
retyping or cut-and-pasting from a full sha1). But in other
cases, that might be all they have. For example, an old
commit message may have used a 7-character hex that was
unique at the time, but is now ambiguous. Git doesn't
provide any information about the ambiguous objects it
found, so it's hard for the user to find out which one they
probably meant.
This patch teaches get_short_sha1() to list the sha1s of the
objects it found, along with a few bits of information that
may help the user decide which one they meant. Here's what
it looks like on git.git:
$ git rev-parse b2e1
error: short SHA1 b2e1 is ambiguous
hint: The candidates are:
hint: b2e1196 tag v2.8.0-rc1
hint: b2e11d1 tree
hint: b2e1632 commit 2007-11-14 - Merge branch 'bs/maint-commit-options'
hint: b2e1759 blob
hint: b2e18954 blob
hint: b2e1895c blob
fatal: ambiguous argument 'b2e1': unknown revision or path not in the working tree.
Use '--' to separate paths from revisions, like this:
'git <command> [<revision>...] -- [<file>...]'
We show the tagname for tags, and the date and subject for
commits. For trees and blobs, in theory we could dig in the
history to find the paths at which they were present. But
that's very expensive (on the order of 30s for the kernel),
and it's not likely to be all that helpful. Most short
references are to commits, so the useful information is
typically going to be that the object in question _isn't_ a
commit. So it's silly to spend a lot of CPU preemptively
digging up the path; the user can do it themselves if they
really need to.
And of course it's somewhat ironic that we abbreviate the
sha1s in the disambiguation hint. But full sha1s would cause
annoying line wrapping for the commit lines, and presumably
the user is going to just re-issue their command immediately
with the corrected sha1.
We also restrict the list to those that match any
disambiguation hint. E.g.:
$ git rev-parse b2e1:foo
error: short SHA1 b2e1 is ambiguous
hint: The candidates are:
hint: b2e1196 tag v2.8.0-rc1
hint: b2e11d1 tree
hint: b2e1632 commit 2007-11-14 - Merge branch 'bs/maint-commit-options'
fatal: Invalid object name 'b2e1'.
does not bother reporting the blobs, because they cannot
work as a treeish.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If an object appears multiple times in the object database
(e.g., in both loose and packed form, or in two separate
packs), the disambiguation machinery may see it more than
once. The get_short_sha1() function handles this already,
but for_each_abbrev() blindly fires the callback for each
instance it finds.
We can fix this by collecting the output in a sha1 array and
de-duplicating it. As a bonus, the sort done for the
de-duplication means that our output will be stable,
regardless of the order in which the objects are found.
Note that the old code normalized the callback's output to
0/1 to store in the 1-bit ds->ambiguous flag (which both
halted the iteration and was returned from the
for_each_abbrev function). Now that we are using sha1_array,
we can return the real value. In practice, it doesn't matter
as the sole caller only ever returns 0.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This is a human-readable message, and there's no reason it
should not be translated. While we're at it, let's drop the
period from the end, which is not our usual style.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We store the hex prefix in a 40-byte buffer with the prefix
itself followed by 40-minus-len "x" characters. These x's
serve no purpose, and the lack of NUL termination makes the
prefix string annoying to use. Let's just terminate it.
Note that this is in contrast to the binary prefix, which
_must_ be zero-padded, because we look at the whole thing
during a binary search to find the first potential match in
each pack index. The loose-object hex search cannot use the
same trick because it has to do a linear walk through the
unsorted results of readdir() (and even if it could, you'd
want zeroes instead of x's).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The disambiguation machinery has two callers: get_short_sha1
and for_each_abbrev. Both need to repeat much of the same
setup: declaring buffers, sanity-checking lengths, preparing
the prefixes, etc. Let's pull that into a single init
function so we can avoid repeating ourselves.
Pulling the buffers into the "struct disambiguate_state"
isn't strictly necessary, but it does make things simpler
for the callers, who no longer have to worry about sizing
them correctly (i.e., it's an implicit requirement that
the caller provide 20- and 40-byte buffers).
And while we're touching this code, we can convert any
magic-number sizes to the more modern GIT_SHA1_* constants.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The treeish disambiguation function tries to peel tags, but
it does so by calling:
deref_tag(lookup_object(sha1), ...);
This will only work if we have previously looked at the tag
and created a "struct tag" for it. Since parsing revision
arguments typically happens before anything else, this is
usually not the case, and we would fail to peel the tag (we
are lucky that deref_tag() gracefully handles the NULL and
does not segfault).
Instead, we can use parse_object(). Note that this is the
same fix done by 94d75d1 (get_short_sha1(): correctly
disambiguate type-limited abbreviation, 2013-07-01), but
that commit fixed only the committish disambiguator, and
left the bug in the treeish one.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The get_sha1() function is actually implementation by many
sub-functions, but we do not always pass our flags around to
all of those functions. As a result, we may forget that our
caller asked us to resolve with GET_SHA1_QUIETLY and output
messages. The two triggerable cases are:
1. Resolving treeish:path will resolve the "treeish"
portion using GET_SHA1_TREEISH, dropping all other
flags.
2. The peel_onion() function did not take flags at all
but recurses to get_sha1_1(), which does.
The solution for both is to bitwise-OR their new flags with
the existing ones (after dropping any mutually exclusive
disambiguation flags).
This bug can trigger with "git rev-parse --quiet", which
asks for quiet resolution. But it can also happen in a more
vanilla code path when we do a follow-up ONLY_TO_DIE
invocation of get_sha1(), and that's what the tests check.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When the revision code cannot parse an argument like
"HEAD:foo", it will call maybe_die_on_misspelt_object_name(),
which re-runs get_sha1() with an extra ONLY_TO_DIE flag. We
then spend more effort to generate a better error message.
Unfortunately, a side effect is that our second call may
repeat the same error messages from the original get_sha1()
call. You can see this with:
$ git show 0017
error: short SHA1 0017 is ambiguous.
error: short SHA1 0017 is ambiguous.
fatal: ambiguous argument '0017': unknown revision or path not in the working tree.
Use '--' to separate paths from revisions, like this:
'git <command> [<revision>...] -- [<file>...]'
where the second "error:" line comes from the ONLY_TO_DIE
call.
To fix this, we can make ONLY_TO_DIE imply QUIETLY. This is
a little odd, because the whole point of ONLY_TO_DIE is to
output error messages. But what we want to do is tell the
rest of the get_sha1() code (particularly get_sha1_1()) that
the _regular_ messages should be quiet, but the only-to-die
ones should not.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The get_sha1() family of functions takes a flags field, but
some of the flags are mutually exclusive. In particular, we
can only handle one disambiguating function, and the flags
quietly override each other. Let's instead detect these as
programming bugs.
Technically some of the flags are supersets of the others,
so treating COMMITTISH|TREEISH as just COMMITTISH is not
wrong, but it's a good sign the caller is confused. And
certainly asking for BLOB|TREE does not work.
We can do the check easily with some bit-twiddling, and as a
bonus, the bit-mask of disambiguators will come in handy in
a future patch.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
All of the callers of this function use struct object_id, so rename it
to get_oid_mb and make it take struct object_id instead of
unsigned char *.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Convert struct cache_entry to use struct object_id by applying the
following semantic patch and the object_id transforms from contrib, plus
the actual change to the struct:
@@
struct cache_entry E1;
@@
- E1.sha1
+ E1.oid.hash
@@
struct cache_entry *E1;
@@
- E1->sha1
+ E1->oid.hash
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Move from unsigned char[20] to struct object_id continues.
* bc/object-id:
match-trees: convert several leaf functions to use struct object_id
tree-walk: convert tree_entry_extract() to use struct object_id
struct name_entry: use struct object_id instead of unsigned char sha1[20]
match-trees: convert shift_tree() and shift_tree_by() to use object_id
test-match-trees: convert to use struct object_id
sha1-name: introduce a get_oid() function
|
|
The get_oid() function is equivalent to the get_sha1() function, but
uses a struct object_id instead.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Commit a60645f (setup: remember whether repository was
found, 2010-08-05) introduced the startup_info structure,
which records some parts of the setup_git_directory()
process (notably, whether we actually found a repository or
not).
One of the uses of this data is for functions to behave
appropriately based on whether we are in a repo. But the
startup_info struct is just a pointer to storage provided by
the main program, and the only program that sets it up is
the git.c wrapper. Thus builtins have access to
startup_info, but externally linked programs do not.
Worse, library code which is accessible from both has to be
careful about accessing startup_info. This can be used to
trigger a die("BUG") via get_sha1():
$ git fast-import <<-\EOF
tag foo
from HEAD:./whatever
EOF
fatal: BUG: startup_info struct is not initialized.
Obviously that's fairly nonsensical input to feed to
fast-import, but we should never hit a die("BUG"). And there
may be other ways to trigger it if other non-builtins
resolve sha1s.
So let's point the storage for startup_info to a static
variable in setup.c, making it available to all users of the
library code. We _could_ turn startup_info into a regular
extern struct, but doing so would mean tweaking all of the
existing use sites. So let's leave the pointer indirection
in place. We can, however, drop any checks for NULL, as
they will always be false (and likewise, we can drop the
test covering this case, which was a rather artificial
situation using one of the test-* programs).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Update various codepaths to avoid manually-counted malloc().
* jk/tighten-alloc: (22 commits)
ewah: convert to REALLOC_ARRAY, etc
convert ewah/bitmap code to use xmalloc
diff_populate_gitlink: use a strbuf
transport_anonymize_url: use xstrfmt
git-compat-util: drop mempcpy compat code
sequencer: simplify memory allocation of get_message
test-path-utils: fix normalize_path_copy output buffer size
fetch-pack: simplify add_sought_entry
fast-import: simplify allocation in start_packfile
write_untracked_extension: use FLEX_ALLOC helper
prepare_{git,shell}_cmd: use argv_array
use st_add and st_mult for allocation size computation
convert trivial cases to FLEX_ARRAY macros
use xmallocz to avoid size arithmetic
convert trivial cases to ALLOC_ARRAY
convert manual allocations to argv_array
argv-array: add detach function
add helpers for allocating flex-array structs
harden REALLOC_ARRAY and xcalloc against size_t overflow
tree-diff: catch integer overflow in combine_diff_path allocation
...
|
|
"git show 'HEAD:Foo[BAR]Baz'" did not interpret the argument as a
rev, i.e. the object named by the the pathname with wildcard
characters in a tree object.
* nd/dwim-wildcards-as-pathspecs:
get_sha1: don't die() on bogus search strings
check_filename: tighten dwim-wildcard ambiguity
checkout: reorder check_filename conditional
|
|
If our size computation overflows size_t, we may allocate a
much smaller buffer than we expected and overflow it. It's
probably impossible to trigger an overflow in most of these
sites in practice, but it is easy enough convert their
additions and multiplications into overflow-checking
variants. This may be fixing real bugs, and it makes
auditing the code easier.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A new "<branch>^{/!-<pattern>}" notation can be used to name a
commit that is reachable from <branch> that does not match the
given <pattern>.
* wp/sha1-name-negative-match:
object name: introduce '^{/!-<negative pattern>}' notation
test for '!' handling in rev-parse's named commits
|
|
The get_sha1() function generally returns an error code
rather than dying, and we sometimes speculatively call it
with something that may be a revision or a pathspec, in
order to see which one it might be.
If it sees a bogus ":/" search string, though, it complains,
without giving the caller the opportunity to recover. We can
demonstrate this in t6133 by looking for ":/*.t", which
should mean "*.t at the root of the tree", but instead dies
because of the invalid regex (the "*" has nothing to operate
on).
We can fix this by returning an error rather than calling
die(). Unfortunately, the tradeoff is that the error message
is slightly worse in cases where we _do_ know we have a rev.
E.g., running "git log ':/*.t' --" before yielded:
fatal: Invalid search pattern: *.t
and now we get only:
fatal: bad revision ':/*.t'
There's not a simple way to fix this short of passing a
"quiet" flag all the way through the get_sha1() stack.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
To name a commit, you can now use the :/!-<negative pattern> regex
style, and consequentially, say
$ git rev-parse HEAD^{/!-foo}
and it will return the hash of the first commit reachable from HEAD,
whose commit message does not contain "foo". This is the opposite of the
existing <rev>^{/<pattern>} syntax.
The specific use-case this is intended for is to perform an operation,
excluding the most-recent commits containing a particular marker. For
example, if you tend to make "work in progress" commits, with messages
beginning with "WIP", you work, then it could be useful to diff against
"the most recent commit which was not a WIP commit". That sort of thing
now possible, via commands such as:
$ git diff @^{/!-^WIP}
The leader '/!-', rather than simply '/!', to denote a negative match,
is chosen to leave room for additional modifiers in the future.
Signed-off-by: Will Palmer <wmpalmer@gmail.com>
Signed-off-by: Stephen P. Smith <ischis2@cox.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Convert all instances of get_object_hash to use an appropriate reference
to the hash member of the oid member of struct object. This provides no
functional change, as it is essentially a macro substitution.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Jeff King <peff@peff.net>
|
|
struct object is one of the major data structures dealing with object
IDs. Convert it to use struct object_id instead of an unsigned char
array. Convert get_object_hash to refer to the new member as well.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Jeff King <peff@peff.net>
|
|
Convert most instances where the sha1 member of struct object is
dereferenced to use get_object_hash. Most instances that are passed to
functions that have versions taking struct object_id, such as
get_sha1_hex/get_oid_hex, or instances that can be trivially converted
to use struct object_id instead, are not converted.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Jeff King <peff@peff.net>
|
|
We dynamically allocate a buffer and then strcpy and strcat
into it. This isn't buggy, but we'd prefer to avoid these
suspicious functions.
This would be a good candidate for converstion to xstrfmt,
but we need to record the length for dealing with index
entries. A strbuf handles that for us.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We use sprintf() to format some hex data into a buffer. The
buffer is clearly long enough, and using snprintf here is
not necessary. And in fact, it does not really make anything
easier to audit, as the size we feed to snprintf accounts
for the magic extra 42 bytes found in each alt->name field
of struct alternate_object_database (which is there exactly
to do this formatting).
Still, it is nice to remove an sprintf call and replace it
with an xsnprintf and explanatory comment, which makes it
easier to audit the code base for overflows.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The sha1_to_hex and find_unique_abbrev functions always
write into reusable static buffers. There are a few problems
with this:
- future calls overwrite our result. This is especially
annoying with find_unique_abbrev, which does not have a
ring of buffers, so you cannot even printf() a result
that has two abbreviated sha1s.
- if you want to put the result into another buffer, we
often strcpy, which looks suspicious when auditing for
overflows.
This patch introduces sha1_to_hex_r and find_unique_abbrev_r,
which write into a user-provided buffer. Of course this is
just punting on the overflow-auditing, as the buffer
obviously needs to be GIT_SHA1_HEXSZ + 1 bytes. But it is
much easier to audit, since that is a well-known size.
We retain the non-reentrant forms, which just become thin
wrappers around the reentrant ones. This patch also adds a
strbuf variant of find_unique_abbrev, which will be handy in
later patches.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In preparation for adding date modes that may carry extra
information beyond the mode itself, this patch converts the
date_mode enum into a struct.
Most of the conversion is fairly straightforward; we pass
the struct as a pointer and dereference the type field where
necessary. Locations that declare a date_mode can use a "{}"
constructor. However, the tricky case is where we use the
enum labels as constants, like:
show_date(t, tz, DATE_NORMAL);
Ideally we could say:
show_date(t, tz, &{ DATE_NORMAL });
but of course C does not allow that. Likewise, we cannot
cast the constant to a struct, because we need to pass an
actual address. Our options are basically:
1. Manually add a "struct date_mode d = { DATE_NORMAL }"
definition to each caller, and pass "&d". This makes
the callers uglier, because they sometimes do not even
have their own scope (e.g., they are inside a switch
statement).
2. Provide a pre-made global "date_normal" struct that can
be passed by address. We'd also need "date_rfc2822",
"date_iso8601", and so forth. But at least the ugliness
is defined in one place.
3. Provide a wrapper that generates the correct struct on
the fly. The big downside is that we end up pointing to
a single global, which makes our wrapper non-reentrant.
But show_date is already not reentrant, so it does not
matter.
This patch implements 3, along with a minor macro to keep
the size of the callers sane.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
for_each_ref() callback functions were taught to name the objects
not with "unsigned char sha1[20]" but with "struct object_id".
* bc/object-id: (56 commits)
struct ref_lock: convert old_sha1 member to object_id
warn_if_dangling_symref(): convert local variable "junk" to object_id
each_ref_fn_adapter(): remove adapter
rev_list_insert_ref(): remove unneeded arguments
rev_list_insert_ref_oid(): new function, taking an object_oid
mark_complete(): remove unneeded arguments
mark_complete_oid(): new function, taking an object_oid
clear_marks(): rewrite to take an object_id argument
mark_complete(): rewrite to take an object_id argument
send_ref(): convert local variable "peeled" to object_id
upload-pack: rewrite functions to take object_id arguments
find_symref(): convert local variable "unused" to object_id
find_symref(): rewrite to take an object_id argument
write_one_ref(): rewrite to take an object_id argument
write_refs_to_temp_dir(): convert local variable sha1 to object_id
submodule: rewrite to take an object_id argument
shallow: rewrite functions to take object_id arguments
handle_one_ref(): rewrite to take an object_id argument
add_info_ref(): rewrite to take an object_id argument
handle_one_reflog(): rewrite to take an object_id argument
...
|
|
Introduce <branch>@{push} short-hand to denote the remote-tracking
branch that tracks the branch at the remote the <branch> would be
pushed to.
* jk/at-push-sha1:
for-each-ref: accept "%(push)" format
for-each-ref: use skip_prefix instead of starts_with
sha1_name: implement @{push} shorthand
sha1_name: refactor interpret_upstream_mark
sha1_name: refactor upstream_mark
remote.c: add branch_get_push
remote.c: return upstream name from stat_tracking_info
remote.c: untangle error logic in branch_get_upstream
remote.c: report specific errors from branch_get_upstream
remote.c: introduce branch_get_upstream helper
remote.c: hoist read_config into remote_get_1
remote.c: provide per-branch pushremote name
remote.c: hoist branch.*.remote lookup out of remote_get_1
remote.c: drop "remote" pointer from "struct branch"
remote.c: refactor setup of branch->merge list
remote.c: drop default_remote_name variable
|
Ævar Arnfjörð Bjarmason
Junio C Hamano
Jeff King
brian m. carlson
René Scharfe
Linus Torvalds
Will Palmer