| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
* jk/maint-sha1-file-name-fix:
remove over-eager caching in sha1_file_name
|
|
* sp/maint-dumb-http-pack-reidx:
http.c::new_http_pack_request: do away with the temp variable filename
http-fetch: Use temporary files for pack-*.idx until verified
http-fetch: Use index-pack rather than verify-pack to check packs
Allow parse_pack_index on temporary files
Extract verify_pack_index for reuse from verify_pack
Introduce close_pack_index to permit replacement
http.c: Remove unnecessary strdup of sha1_to_hex result
http.c: Don't store destination name in request structures
http.c: Drop useless != NULL test in finish_http_pack_request
http.c: Tiny refactoring of finish_http_pack_request
t5550-http-fetch: Use subshell for repository operations
http.c: Remove bad free of static block
|
|
This function takes a sha1 and produces a loose object
filename. It caches the location of the object directory so
that it can fill the sha1 information directly without
allocating a new buffer (and in its original incarnation,
without calling getenv(), though these days we cache that
with the code in environment.c).
This cached base directory can become stale, however, if in
a single process git changes the location of the object
directory (e.g., by running setup_work_tree, which will
chdir to the new worktree).
In most cases this isn't a problem, because we tend to set
up the git repository location and do any chdir()s before
actually looking up any objects, so the first lookup will
cache the correct location. In the case of reset --hard,
however, we do something like:
1. look up the commit object
2. notice we are doing --hard, run setup_work_tree
3. look up the tree object to reset
Step (3) fails because our cache object directory value is
bogus.
This patch simply removes the caching. We use a static
buffer instead of allocating one each time (the original
version treated the malloc'd buffer as a static, so there is
no change in calling semantics).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The check whether size is zero was done after if size <= SMALL_FILE_SIZE,
as result, zero size case was never triggered. Instead zero length file
was treated as any other small file. This did not caused any problem, but
if we have a special case for size equal to zero, it is better to make it
work and avoid redundant malloc().
Signed-off-by: Dmitry Potapov <dpotapov@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The easiest way to verify a pack index is to open it through the
standard parse_pack_index function, permitting the header check
to happen when the file is mapped. However, the dumb HTTP client
needs to verify a pack index before its moved into its proper file
name within the objects/pack directory, to prevent a corrupt index
from being made available. So permit the caller to specify the
exact path of the index file.
For now we're still using the final destination name within the
sole call site in http.c, but eventually we will start to parse
the temporary path instead.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
By closing the pack index, a caller can later overwrite the index
with an updated index file, possibly after converting from v1 to
the v2 format. Because p->index_data is NULL after close, on the
next access the index will be opened again and the other members
will be updated with new data.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
These should take const buffers as input data, but zlib's
next_in pointer is not const-correct. Let's fix it at the
zlib level, though, so the cast happens in one obvious
place. This should be safe, as a similar cast is used in
zlib's example code for a const array.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* mm/mkstemps-mode-for-packfiles:
Use git_mkstemp_mode instead of plain mkstemp to create object files
git_mkstemps_mode: don't set errno to EINVAL on exit.
Use git_mkstemp_mode and xmkstemp_mode in odb_mkstemp, not chmod later.
git_mkstemp_mode, xmkstemp_mode: variants of gitmkstemps with mode argument.
Move gitmkstemps to path.c
Add a testcase for ACL with restrictive umask.
|
|
* nd/root-git:
Add test for using Git at root of file system
Support working directory located at root
Move offset_1st_component() to path.c
init-db, rev-parse --git-dir: do not append redundant slash
make_absolute_path(): Do not append redundant slash
Conflicts:
setup.c
sha1_file.c
|
|
* mm/mkstemps-mode-for-packfiles:
Use git_mkstemp_mode instead of plain mkstemp to create object files
git_mkstemps_mode: don't set errno to EINVAL on exit.
Use git_mkstemp_mode and xmkstemp_mode in odb_mkstemp, not chmod later.
git_mkstemp_mode, xmkstemp_mode: variants of gitmkstemps with mode argument.
Move gitmkstemps to path.c
Add a testcase for ACL with restrictive umask.
|
|
* dp/read-not-mmap-small-loose-object:
hash-object: don't use mmap() for small files
|
|
* np/compress-loose-object-memsave:
sha1_file: be paranoid when creating loose objects
sha1_file: don't malloc the whole compressed result when writing out objects
|
|
We used to unnecessarily give the read permission to group and others,
regardless of the umask, which isn't serious because the objects are
still protected by their containing directory, but isn't necessary
either.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We don't want the data being deflated and stored into loose objects
to be different from what we expect. While the deflated data is
protected by a CRC which is good enough for safe data retrieval
operations, we still want to be doubly sure that the source data used
at object creation time is still what we expected once that data has
been deflated and its CRC32 computed.
The most plausible data corruption may occur if the source file is
modified while Git is deflating and writing it out in a loose object.
Or Git itself could have a bug causing memory corruption. Or even bad
RAM could cause trouble. So it is best to make sure everything is
coherent and checksum protected from beginning to end.
To do so we compute the SHA1 of the data being deflated _after_ the
deflate operation has consumed that data, and make sure it matches
with the expected SHA1. This way we can rely on the CRC32 checked by
the inflate operation to provide a good indication that the data is still
coherent with its SHA1 hash. One pathological case we ignore is when
the data is modified before (or during) deflate call, but changed back
before it is hashed.
There is some overhead of course. Using 'git add' on a set of large files:
Before:
real 0m25.210s
user 0m23.783s
sys 0m1.408s
After:
real 0m26.537s
user 0m25.175s
sys 0m1.358s
The overhead is around 5% for full data coherency guarantee.
Signed-off-by: Nicolas Pitre <nico@fluxnic.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Using read() instead of mmap() can be 39% speed up for 1Kb files and is
1% speed up 1Mb files. For larger files, it is better to use mmap(),
because the difference between is not significant, and when there is not
enough memory, mmap() performs much better, because it avoids swapping.
Signed-off-by: Dmitry Potapov <dpotapov@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
There is no real advantage to malloc the whole output buffer and
deflate the data in a single pass when writing loose objects. That is
like only 1% faster while using more memory, especially with large
files where memory usage is far more. It is best to deflate and write
the data out in small chunks reusing the same memory instead.
For example, using 'git add' on a few large files averaging 40 MB ...
Before:
21.45user 1.10system 0:22.57elapsed 99%CPU (0avgtext+0avgdata 0maxresident)k
0inputs+828040outputs (0major+142640minor)pagefaults 0swaps
After:
21.50user 1.25system 0:22.76elapsed 99%CPU (0avgtext+0avgdata 0maxresident)k
0inputs+828040outputs (0major+104408minor)pagefaults 0swaps
While the runtime stayed relatively the same, the number of minor page
faults went down significantly.
Signed-off-by: Nicolas Pitre <nico@fluxnic.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The implementation is also lightly modified to use is_dir_sep()
instead of hardcoding '/'.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* il/maint-xmallocz:
Fix integer overflow in unpack_compressed_entry()
Fix integer overflow in unpack_sha1_rest()
Fix integer overflow in patch_delta()
Add xmallocz()
|
|
Signed-off-by: Ilari Liusvaara <ilari.liusvaara@elisanet.fi>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
[jc: later NUL termination by the caller becomes unnecessary]
Signed-off-by: Ilari Liusvaara <ilari.liusvaara@elisanet.fi>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
As the documentation says, this is primarily for debugging, and
in the longer term we should rename it to test-show-index or something.
In the meantime, just avoid xmalloc (which slurps in the rest of git), and
separating out the trivial hex functions into "hex.o".
This results in
[torvalds@nehalem git]$ size git-show-index
text data bss dec hex filename
222818 2276 112688 337782 52776 git-show-index (before)
5696 624 1264 7584 1da0 git-show-index (after)
which is a whole lot better.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
has_pack_file() is not used anywhere.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The loop in get_size_from_delta() feeds a deflated delta data from the
pack stream _until_ we get inflated result of 20 bytes[*] or we reach the
end of stream.
Side note. This magic number 20 does not have anything to do with the
size of the hash we use, but comes from 1a3b55c (reduce delta head
inflated size, 2006-10-18).
The loop reads like this:
do {
in = use_pack();
stream.next_in = in;
st = git_inflate(&stream, Z_FINISH);
curpos += stream.next_in - in;
} while ((st == Z_OK || st == Z_BUF_ERROR) &&
stream.total_out < sizeof(delta_head));
This git_inflate() can return:
- Z_STREAM_END, if use_pack() fed it enough input and the delta itself
was smaller than 20 bytes;
- Z_OK, when some progress has been made;
- Z_BUF_ERROR, if no progress is possible, because we either ran out of
input (due to corrupt pack), or we ran out of output before we saw the
end of the stream.
The fix b3118bd (sha1_file: Fix infinite loop when pack is corrupted,
2009-10-14) attempted was against a corruption that appears to be a valid
stream that produces a result larger than the output buffer, but we are
not even trying to read the stream to the end in this loop. If avail_out
becomes zero, total_out will be the same as sizeof(delta_head) so the loop
will terminate without the "fix". There is no fix from b3118bd needed for
this loop, in other words.
The loop in unpack_compressed_entry() is quite a different story. It
feeds a deflated stream (either delta or base) and allows the stream to
produce output up to what we expect but no more.
do {
in = use_pack();
stream.next_in = in;
st = git_inflate(&stream, Z_FINISH);
curpos += stream.next_in - in;
} while (st == Z_OK || st == Z_BUF_ERROR)
This _does_ risk falling into an endless interation, as we can exhaust
avail_out if the length we expect is smaller than what the stream wants to
produce (due to pack corruption). In such a case, avail_out will become
zero and inflate() will return Z_BUF_ERROR, while avail_in may (or may
not) be zero.
But this is not a right fix:
do {
in = use_pack();
stream.next_in = in;
st = git_inflate(&stream, Z_FINISH);
+ if (st == Z_BUF_ERROR && (stream.avail_in || !stream.avail_out)
+ break; /* wants more input??? */
curpos += stream.next_in - in;
} while (st == Z_OK || st == Z_BUF_ERROR)
as Z_BUF_ERROR from inflate() may be telling us that avail_in has also run
out before reading the end of stream marker. In such a case, both avail_in
and avail_out would be zero, and the loop should iterate to allow the end
of stream marker to be seen by inflate from the input stream.
The right fix for this loop is likely to be to increment the initial
avail_out by one (we allocate one extra byte to terminate it with NUL
anyway, so there is no risk to overrun the buffer), and break out if we
see that avail_out has become zero, in order to detect that the stream
wants to produce more than what we expect. After the loop, we have a
check that exactly tests this condition:
if ((st != Z_STREAM_END) || stream.total_out != size) {
free(buffer);
return NULL;
}
So here is a patch (without my previous botched attempts) to fix this
issue. The first hunk reverts the corresponding hunk from b3118bd, and
the second hunk is the same fix proposed earlier.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Some types of corruption to a pack may confuse the deflate stream
which stores an object. In Andy's reported case a 36 byte region
of the pack was overwritten, leading to what appeared to be a valid
deflate stream that was trying to produce a result larger than our
allocated output buffer could accept.
Z_BUF_ERROR is returned from inflate() if either the input buffer
needs more input bytes, or the output buffer has run out of space.
Previously we only considered the former case, as it meant we needed
to move the stream's input buffer to the next window in the pack.
We now abort the loop if inflate() returns Z_BUF_ERROR without
consuming the entire input buffer it was given, or has filled
the entire output buffer but has not yet returned Z_STREAM_END.
Either state is a clear indicator that this loop is not working
as expected, and should not continue.
This problem cannot occur with loose objects as we open the entire
loose object as a single buffer and treat Z_BUF_ERROR as an error.
Reported-by: Andy Isaacson <adi@hexapodia.org>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Acked-by: Nicolas Pitre <nico@fluxnic.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* cc/replace:
t6050: check pushing something based on a replaced commit
Documentation: add documentation for "git replace"
Add git-replace to .gitignore
builtin-replace: use "usage_msg_opt" to give better error messages
parse-options: add new function "usage_msg_opt"
builtin-replace: teach "git replace" to actually replace
Add new "git replace" command
environment: add global variable to disable replacement
mktag: call "check_sha1_signature" with the replacement sha1
replace_object: add a test case
object: call "check_sha1_signature" with the replacement sha1
sha1_file: add a "read_sha1_file_repl" function
replace_object: add mechanism to replace objects found in "refs/replace/"
refs: add a "for_each_replace_ref" function
|
|
Signed-off-by: Pierre Habouzit <madcoder@debian.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* tr/die_errno:
Use die_errno() instead of die() when checking syscalls
Convert existing die(..., strerror(errno)) to die_errno()
die_errno(): double % in strerror() output just in case
Introduce die_errno() that appends strerror(errno) to die()
|
|
Change calls to die(..., strerror(errno)) to use the new die_errno().
In the process, also make slight style adjustments: at least state
_something_ about the function that failed (instead of just printing
the pathname), and put paths in single quotes.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Shifting 'unsigned char' or 'unsigned short' left can result in sign
extension errors, since the C integer promotion rules means that the
unsigned char/short will get implicitly promoted to a signed 'int' due to
the shift (or due to other operations).
This normally doesn't matter, but if you shift things up sufficiently, it
will now set the sign bit in 'int', and a subsequent cast to a bigger type
(eg 'long' or 'unsigned long') will now sign-extend the value despite the
original expression being unsigned.
One example of this would be something like
unsigned long size;
unsigned char c;
size += c << 24;
where despite all the variables being unsigned, 'c << 24' ends up being a
signed entity, and will get sign-extended when then doing the addition in
an 'unsigned long' type.
Since git uses 'unsigned char' pointers extensively, we actually have this
bug in a couple of places.
I may have missed some, but this is the result of looking at
git grep '[^0-9 ][ ]*<<[ ][a-z]' -- '*.c' '*.h'
git grep '<<[ ]*24'
which catches at least the common byte cases (shifting variables by a
variable amount, and shifting by 24 bits).
I also grepped for just 'unsigned char' variables in general, and
converted the ones that most obviously ended up getting implicitly cast
immediately anyway (eg hash_name(), encode_85()).
In addition to just avoiding 'unsigned char', this patch also tries to use
a common idiom for the delta header size thing. We had three different
variations on it: "& 0x7fUL" in one place (getting the sign extension
right), and "& ~0x80" and "& 0x7f" in two other places (not getting it
right). Apart from making them all just avoid using "unsigned char" at
all, I also unified them to then use a simple "& 0x7f".
I considered making a sparse extension which warns about doing implicit
casts from unsigned types to signed types, but it gets rather complex very
quickly, so this is just a hack.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This new function will replace "read_sha1_file". This latter function
becoming just a stub to call the former will a NULL "replacement"
argument.
This new function is needed because sometimes we need to use the
replacement sha1.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The code implementing this mechanism has been copied more-or-less
from the commit graft code.
This mechanism is used in "read_sha1_file". sha1 passed to this
function that match a ref name in "refs/replace/" are replaced by
the sha1 that has been read in the ref.
We "die" if the replacement recursion depth is too high or if we
can't read the replacement object.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* ar/unlink-err:
print unlink(2) errno in copy_or_link_directory
replace direct calls to unlink(2) with unlink_or_warn
Introduce an unlink(2) wrapper which gives warning if unlink failed
|
|
* maint:
grep: fix word-regexp colouring
completion: use git rev-parse to detect bare repos
Cope better with a _lot_ of packs
for-each-ref: fix segfault in copy_email
|
|
You might end up with a situation where you have tons of pack files, e.g.
when using hg2git. In this situation, all kinds of operations may
end up with a "too many files open" error. Let's recover gracefully from
that.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Looks-right-to-me-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* ar/unlink-err:
print unlink(2) errno in copy_or_link_directory
replace direct calls to unlink(2) with unlink_or_warn
Introduce an unlink(2) wrapper which gives warning if unlink failed
|
|
Essentially; s/type* /type */ as per the coding guidelines.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This helps to notice when something's going wrong, especially on
systems which lock open files.
I used the following criteria when selecting the code for replacement:
- it was already printing a warning for the unlink failures
- it is in a function which already printing something or is
called from such a function
- it is in a static function, returning void and the function is only
called from a builtin main function (cmd_)
- it is in a function which handles emergency exit (signal handlers)
- it is in a function which is obvously cleaning up the lockfiles
Signed-off-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"Unreliable hardlinks" is a misleading description for what is happening.
So rename it to something less misleading.
Suggested by Linus Torvalds.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
It seems that accessing NTFS partitions with ufsd (at least on my EeePC)
has an unnerving bug: if you link() a file and unlink() it right away,
the target of the link() will have the correct size, but consist of NULs.
It seems as if the calls are simply not serialized correctly, as single-stepping
through the function move_temp_to_file() works flawlessly.
As ufsd is "Commertial software" (sic!), I cannot fix it, and have to work
around it in Git.
At the same time, it seems that this fixes msysGit issues 222 and 229 to
assume that Windows cannot handle link() && unlink().
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Acked-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* jc/shared-literally:
t1301: loosen test for forced modes
set_shared_perm(): sometimes we know what the final mode bits should look like
move_temp_to_file(): do not forget to chmod() in "Coda hack" codepath
Move chmod(foo, 0444) into move_temp_to_file()
"core.sharedrepository = 0mode" should set, not loosen
|
|
* jc/maint-1.6.0-keep-pack:
pack-objects: don't loosen objects available in alternate or kept packs
t7700: demonstrate repack flaw which may loosen objects unnecessarily
Remove --kept-pack-only option and associated infrastructure
pack-objects: only repack or loosen objects residing in "local" packs
git-repack.sh: don't use --kept-pack-only option to pack-objects
t7700-repack: add two new tests demonstrating repacking flaws
Conflicts:
t/t7700-repack.sh
|
|
adjust_shared_perm() first obtains the mode bits from lstat(2), expecting
to find what the result of applying user's umask is, and then tweaks it
as necessary. When the file to be adjusted is created with mkstemp(3),
however, the mode thusly obtained does not have anything to do with user's
umask, and we would need to start from 0444 in such a case and there is no
point running lstat(2) for such a path.
This introduces a new API set_shared_perm() to bypass the lstat(2) and
instead force setting the mode bits to the desired value directly.
adjust_shared_perm() becomes a thin wrapper to the function.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Now move_temp_to_file() is responsible for doing everything that is
necessary to turn a tempfile in $GIT_DIR into its final form, it must make
sure "Coda hack" codepath correctly makes the file read-only.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When writing out a loose object or a pack (index), move_temp_to_file() is
called to finalize the resulting file. These files (loose files and packs)
should all have permission mode 0444 (modulo adjust_shared_perm()).
Therefore, instead of doing chmod(foo, 0444) explicitly from each callsite
(or even forgetting to chmod() at all), do the chmod() call from within
move_temp_to_file().
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This fixes the behaviour of octal notation to how it is defined in the
documentation, while keeping the traditional "loosen only" semantics
intact for "group" and "everybody".
Three main points of this patch are:
- For an explicit octal notation, the internal shared_repository variable
is set to a negative value, so that we can tell "group" (which is to
"OR" in 0660) and 0660 (which is to "SET" to 0660);
- git-init did not set shared_repository variable early enough to affect
the initial creation of many files, notably copied templates and the
configuration. We set it very early when a command-line option
specifies a custom value.
- Many codepaths create files inside $GIT_DIR by various ways that all
involve mkstemp(), and then call move_temp_to_file() to rename it to
its final destination. We can add adjust_shared_perm() call here; for
the traditional "loosen-only", this would be a no-op for many codepaths
because the mode is already loose enough, but with the new behaviour it
makes a difference.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* maint:
Increase the size of the die/warning buffer to avoid truncation
close_sha1_file(): make it easier to diagnose errors
avoid possible overflow in delta size filtering computation
|
|
* maint-1.6.1:
close_sha1_file(): make it easier to diagnose errors
avoid possible overflow in delta size filtering computation
|
|
* maint-1.6.0:
close_sha1_file(): make it easier to diagnose errors
avoid possible overflow in delta size filtering computation
|
|
A bug report with "unable to write sha1 file" made us realize that we do
not have enough information to guess why close() is failing.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This option to pack-objects/rev-list was created to improve the -A and -a
options of repack. It was found to be lacking in that it did not provide
the ability to differentiate between local and non-local kept packs, and
found to be unnecessary since objects residing in local kept packs can be
filtered out by the --honor-pack-keep option.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
Junio C Hamano
Jeff King
Dmitry Potapov
Shawn O. Pearce
Matthieu Moy
Nicolas Pitre
Nguyễn Thái Ngọc Duy
Ilari Liusvaara
Linus Torvalds
Pierre Habouzit
Thomas Rast
Christian Couder
Johannes Schindelin
Felipe Contreras
Alex Riesen
Johan Herland
Brandon Casey