| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
* jc/pack-order-tweak:
pack-objects: optimize "recency order"
core: log offset pack data accesses happened
|
|
* jc/index-pack:
verify-pack: use index-pack --verify
index-pack: show histogram when emulating "verify-pack -v"
index-pack: start learning to emulate "verify-pack -v"
index-pack: a miniscule refactor
index-pack --verify: read anomalous offsets from v2 idx file
write_idx_file: need_large_offset() helper function
index-pack: --verify
write_idx_file: introduce a struct to hold idx customization options
index-pack: group the delta-base array entries also by type
Conflicts:
builtin/verify-pack.c
cache.h
sha1_file.c
|
|
* jc/zlib-wrap:
zlib: allow feeding more than 4GB in one go
zlib: zlib can only process 4GB at a time
zlib: wrap deflateBound() too
zlib: wrap deflate side of the API
zlib: wrap inflateInit2 used to accept only for gzip format
zlib: wrap remaining calls to direct inflate/inflateEnd
zlib wrapper: refactor error message formatter
Conflicts:
sha1_file.c
|
|
* jc/legacy-loose-object:
sha1_file.c: "legacy" is really the current format
|
|
In a workload other than "git log" (without pathspec nor any option that
causes us to inspect trees and blobs), the recency pack order is said to
cause the access jump around quite a bit. Add a hook to allow us observe
how bad it is.
"git config core.logpackaccess /var/tmp/pal.txt" will give you the log
in the specified file.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The size of objects we read from the repository and data we try to put
into the repository are represented in "unsigned long", so that on larger
architectures we can handle objects that weigh more than 4GB.
But the interface defined in zlib.h to communicate with inflate/deflate
limits avail_in (how many bytes of input are we calling zlib with) and
avail_out (how many bytes of output from zlib are we ready to accept)
fields effectively to 4GB by defining their type to be uInt.
In many places in our code, we allocate a large buffer (e.g. mmap'ing a
large loose object file) and tell zlib its size by assigning the size to
avail_in field of the stream, but that will truncate the high octets of
the real size. The worst part of this story is that we often pass around
z_stream (the state object used by zlib) to keep track of the number of
used bytes in input/output buffer by inspecting these two fields, which
practically limits our callchain to the same 4GB limit.
Wrap z_stream in another structure git_zstream that can express avail_in
and avail_out in unsigned long. For now, just die() when the caller gives
a size that cannot be given to a single zlib call. In later patches in the
series, we would make git_inflate() and git_deflate() internally loop to
give callers an illusion that our "improved" version of zlib interface can
operate on a buffer larger than 4GB in one go.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Wrap deflateInit, deflate, and deflateEnd for everybody, and the sole use
of deflateInit2 in remote-curl.c to tell the library to use gzip header
and trailer in git_deflate_init_gzip().
There is only one caller that cares about the status from deflateEnd().
Introduce git_deflate_end_gently() to let that sole caller retrieve the
status and act on it (i.e. die) for now, but we would probably want to
make inflate_end/deflate_end die when they ran out of memory and get
rid of the _gently() kind.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Every time I look at the read-loose-object codepath, legacy_loose_object()
function makes my brain go through mental contortion. When we were playing
with the experimental loose object format, it may have made sense to call
the traditional format "legacy", in the hope that the experimental one
will some day replace it to become official, but it never happened.
This renames the function (and negates its return value) to detect if we
are looking at the experimental format, and move the code around in its
caller which used to do "if we are looing at legacy, do this special case,
otherwise the normal case is this". The codepath to read from the loose
objects in experimental format is the "unlikely" case.
Someday after Git 2.0, we should drop the support of this format.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This finally gets rid of the inefficient verify-pack implementation that
walks objects in the packfile in their object name order and replaces it
with a call to index-pack --verify. As a side effect, it also removes
packed_object_info_detail() API which is rather expensive.
As this changes the way errors are reported (verify-pack used to rely on
the usual runtime error detection routine unpack_entry() to diagnose the
CRC errors in an entry in the *.idx file; index-pack --verify checks the
whole *.idx file in one go), update a test that expected the string "CRC"
to appear in the error message.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Using an unsigned type, we would fail to detect a read error and then
proceed to try to write (size_t)-1 bytes.
Signed-off-by: Jim Meyering <meyering@redhat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* jc/bigfile:
Bigfile: teach "git add" to send a large file straight to a pack
index_fd(): split into two helper functions
index_fd(): turn write_object and format_check arguments into one flag
|
|
Make map_sha1_file(), parse_sha1_header() and unpack_sha1_header()
available to the streaming read API by exporting them via cache.h header
file.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This function is used to read and skip over the per-object header
in a packfile.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
An object found in the delta-base cache is not guaranteed to
stay there, but we know it came from a pack and it is likely
to give us a quick access if we read_sha1_file() it right now,
which is a piece of useful information.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* jc/replacing:
read_sha1_file(): allow selective bypassing of replacement mechanism
inline lookup_replace_object() calls
read_sha1_file(): get rid of read_sha1_file_repl() madness
t6050: make sure we test not just commit replacement
Declare lookup_replace_object() in cache.h, not in commit.h
Conflicts:
environment.c
|
|
The original interface for sha1_object_info() takes an object name and
gives back a type and its size (the latter is given only when it was
asked). The new interface wraps its implementation and exposes a bit
more pieces of information that the interface used to discard, namely:
- where the object is stored (loose? cached? packed?)
- if packed, where in which packfile?
Signed-off-by: Junio C Hamano <gitster@pobox.com>
---
* In the earlier round, this used u.pack.delta to record the length of
the delta chain, but the caller is not necessarily interested in the
length of the delta chain per-se, but may only want to know if it is a
delta against another object or is stored as a deflated data. Calling
packed_object_info_detail() involves walking the reverse index chain to
compute the store size of the object and is unnecessarily expensive.
We could resurrect the code if a new caller wants to know, but I doubt
it.
|
|
Instead return an integer that can be given to typename() if
the caller wants a string, just like everybody else does.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* jc/convert:
convert: make it harder to screw up adding a conversion attribute
convert: make it safer to add conversion attributes
convert: give saner names to crlf/eol variables, types and functions
convert: rename the "eol" global variable to "core_eol"
* jc/bigfile:
Bigfile: teach "git add" to send a large file straight to a pack
index_fd(): split into two helper functions
index_fd(): turn write_object and format_check arguments into one flag
* jc/replacing:
read_sha1_file(): allow selective bypassing of replacement mechanism
inline lookup_replace_object() calls
read_sha1_file(): get rid of read_sha1_file_repl() madness
t6050: make sure we test not just commit replacement
Declare lookup_replace_object() in cache.h, not in commit.h
|
|
Since commit c793430 (Limit file descriptors used by packs, 2011-02-28),
the extra parameter added in f2e872aa (Work around EMFILE when there are
too many pack files, 2010-11-01) is not used anymore.
Remove it.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Acked-by: Shawn O. Pearce <spearce@spearce.org>
|
|
The number zero is spelled "zero", not "zer0".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The way "object replacement" mechanism was tucked to the read_sha1_file()
interface was suboptimal in a couple of ways:
- Callers that want it to die with useful diagnosis upon seeing a corrupt
object does not have a way to say that they do not want any object
replacement.
- Callers who do not want it to die but want to handle the errors
themselves are told to arrange to call read_object(), but the function
does not use the replacement mechanism, and also it is a file scope
static function that not many callers can call to begin with.
This adds a read_sha1_file_extended() that takes a set of flags; the
callers of read_sha1_file() passes a flag READ_SHA1_FILE_REPLACE to ask
for object replacement mechanism to kick in.
Later, we could add another flag bit to tell the function to return an
error instead of dying and then remove the misguided "call read_object()
yourself".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Most callers want to silently get a replacement object, and they do not
care what the real name of the replacement object is. Worse yet, no sane
interface to return the underlying object without replacement is provided.
Remove the function and make only the few callers that want the name of
the replacement object find it themselves.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When adding a new content to the repository, we have always slurped
the blob in its entirety in-core first, and computed the object name
and compressed it into a loose object file. Handling large binary
files (e.g. video and audio asset for games) has been problematic
because of this design.
At the middle level of "git add" callchain is an internal API
index_fd() that takes an open file descriptor to read from the
working tree file being added with its size. Teach it to call out to
fast-import when adding a large blob.
The write-out codepath in entry.c::write_entry() should be taught to
stream, instead of reading everything in core. This should not be so
hard to implement, especially if we limit ourselves only to loose
object files and non-delta representation in packfiles.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Split out the case where we do not know the size of the input (hence we
read everything into a strbuf before doing anything) to index_pipe(), and
the other case where we mmap or read the whole data to index_bulk().
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The "format_check" parameter tucked after the existing parameters is too
ugly an afterthought to live in any reasonable API.
Combine it with the other boolean parameter "write_object" into a single
"flags" parameter.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
I found that some doubled words had snuck back into projects from which
I'd already removed them, so now there's a "syntax-check" makefile rule in
gnulib to help prevent recurrence.
Running the command below spotted a few in git, too:
git ls-files | xargs perl -0777 -n \
-e 'while (/\b(then?|[iao]n|i[fst]|but|f?or|at|and|[dt])\s+\1\b/gims)' \
-e '{$n=($` =~ tr/\n/\n/ + 1); ($v=$&)=~s/\n/\\n/g;' \
-e 'print "$ARGV:$n:$v\n"}'
Signed-off-by: Jim Meyering <meyering@redhat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* jc/maint-rerere-in-workdir:
rerere: make sure it works even in a workdir attached to a young repository
|
|
The git-new-workdir script in contrib/ makes a new work tree by sharing
many subdirectories of the .git directory with the original repository.
When rerere.enabled is set in the original repository, but the user has
not encountered any conflicts yet, the original repository may not yet
have .git/rr-cache directory.
When rerere wants to run in a new work tree created from such a young
original repository, it fails to mkdir(2) .git/rr-cache that is a symlink
to a yet-to-be-created directory.
There are three possible approaches to this:
- A naive solution is not to create a symlink in the git-new-workdir
script to a directory the original does not have (yet). This is not a
solution, as we tend to lazily create subdirectories of .git/, and
having rerere.enabled configuration set is a strong indication that the
user _wants_ to have this lazy creation to happen;
- We could always create .git/rr-cache upon repository creation. This is
tempting but will not help people with existing repositories.
- Detect this case by seeing that mkdir(2) failed with EEXIST, checking
that the path is a symlink, and try running mkdir(2) on the link
target.
This patch solves the issue by doing the third one.
Strictly speaking, this is incomplete. It does not attempt to handle
relative symbolic link that points into the original repository, but this
is good enough to help people who use contrib/workdir/git-new-workdir
script.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* jn/maint-c99-format:
unbreak and eliminate NO_C99_FORMAT
mktag: avoid %td in format string
|
|
In the spirit of v1.5.0.2~21 (Check for PRIuMAX rather than
NO_C99_FORMAT in fast-import.c, 2007-02-20), use PRIuMAX from
git-compat-util.h on all platforms instead of C99-specific formats
like %zu with dangerous fallbacks to %u or %lu.
So now C99-challenged platforms can build git without provoking
warnings or errors from printf, even if pointers do not have the same
size as an int or long.
The need for a fallback PRIuMAX is detected in git-compat-util.h with
"#ifndef PRIuMAX". So while at it, simplify the Makefile and configure
script by eliminating the NO_C99_FORMAT knob altogether.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* sp/maint-fd-limit:
sha1_file.c: Don't retain open fds on small packs
mingw: add minimum getrlimit() compatibility stub
Limit file descriptors used by packs
|
|
If a pack file is small enough that its entire contents fits within
one mmap window, mmap the file and then immediately close its file
descriptor. This reduces the number of file descriptors that are
needed to read from repositories with many tiny pack files, such
as one that has received 1000 pushes (and created 1000 small pack
files) since its last repack.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Rather than using 'errno == EMFILE' after a failed open() call
to indicate the process is out of file descriptors and an LRU
pack window should be closed, place a hard upper limit on the
number of open packs based on the actual rlimit of the process.
By using a hard upper limit that is below the rlimit of the current
process it is not necessary to check for EMFILE on every single
fd-allocating system call. Instead reserving 25 file descriptors
makes it safe to assume the system call won't fail due to being over
the filedescriptor limit. Here 25 is chosen as a WAG, but considers
3 for stdin/stdout/stderr, and at least a few for other Git code
to operate on temporary files. An additional 20 is reserved as it
is not known what the C library needs to perform other services on
Git's behalf, such as nsswitch or name resolution.
This fixes a case where running `git gc --auto` in a repository
with more than 1024 packs (but an rlimit of 1024 open fds) fails
due to the temporary output file not being able to allocate a
file descriptor. The output file is opened by pack-objects after
object enumeration and delta compression are done, both of which
have already opened all of the packs and fully populated the file
descriptor table.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* nd/hash-object-sanity:
Make hash-object more robust against malformed objects
Conflicts:
cache.h
|
|
Functions such as hashcmp that expect a binary SHA-1 value take
parameters of type "unsigned char *" to avoid accepting a textual
SHA-1 passed by mistake. Unfortunately, this means passing the string
literal EMPTY_TREE_SHA1_BIN requires an ugly cast. Tweak the
definition of EMPTY_TREE_SHA1_BIN to produce a value of more
convenient type.
In the future the definition might change to
extern const unsigned char empty_tree_sha1_bin[20];
#define EMPTY_TREE_SHA1_BIN empty_tree_sha1_bin
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Cached object store was added in d66b37b (Add pretend_sha1_file()
interface. - 2007-02-04) as a way to temporarily inject some objects
to object store.
But only read_sha1_file() knows about this store. While it will return
an object from this store, sha1_object_info() will happily say
"object not found".
Teach sha1_object_info() about the cached store for consistency.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Commits, trees and tags have structure. Don't let users feed git
with malformed ones. Sooner or later git will die() when
encountering them.
Note that this patch does not check semantics. A tree that points
to non-existent objects is perfectly OK (and should be so, users
may choose to add commit first, then its associated tree for example).
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The errno check added in commit 3ba7a06 "A loose object is not corrupt
if it cannot be read due to EMFILE" only checked for whether errno is
not ENOENT and thus incorrectly treated "no error" as an error
condition.
Because of that, it never reached the code path that would report that
the object is corrupted and instead caused funny errors like:
fatal: failed to read object 333c4768ce595793fdab1ef3a036413e2a883853: Success
So we have to extend the check to cover the case in which the object
file was successfully read, but its contents are corrupted.
Reported-by: Will Palmer <wmpalmer@gmail.com>
Signed-off-by: Björn Steinbrink <B.Steinbrink@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* jn/thinner-wrapper:
Remove pack file handling dependency from wrapper.o
pack-objects: mark file-local variable static
wrapper: give zlib wrappers their own translation unit
strbuf: move strbuf_branchname to sha1_name.c
path helpers: move git_mkstemp* to wrapper.c
wrapper: move odb_* to environment.c
wrapper: move xmmap() to sha1_file.c
|
|
As v1.7.0-rc0~43 (slim down "git show-index", 2010-01-21) explains,
use of xmalloc() brings in a dependency on zlib, the sha1 lib, and the
rest of git's object file access machinery via try_to_free_pack_memory.
That is overkill when xmalloc is just being used as a convenience
wrapper to exit when no memory is available.
So defer setting try_to_free_pack_memory as try_to_free_routine until
the first packfile is opened in add_packed_git().
After this change, a simple program using xmalloc() and no other
functions will not pull in any code from libgit.a aside from wrapper.o
and usage.o.
Improved-by: René Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
wrapper.o depends on sha1_file.o for a number of reasons. One is
release_pack_memory().
xmmap function calls mmap, discarding unused pack windows when
necessary to relieve memory pressure. Simple git programs using
wrapper.o as a friendly libc do not need this functionality.
So move xmmap to sha1_file.o, where release_pack_memory() is.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When opening any files in the object database, release unused pack
windows if the open(2) syscall fails due to EMFILE (too many open
files in this process). This allows Git to degrade gracefully on
a repository with thousands of pack files, and a commit stored in
a loose object in the middle of the history.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This utility function avoids an unnecessary update of the access time
for a loose object file. Just as the atime isn't useful on a loose
object, its not useful on the pack or the corresonding idx file.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git fsck" bails out with a claim that a loose object that cannot be
read but exists on the filesystem to be corrupt, which is wrong when
read_object() failed due to e.g. EMFILE.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Clarify the error reporting logic by moving the normal codepath (i.e. we
read the object we wanted to read correctly) up and return early.
The logic to report the name of the packfile with a corrupt object,
introduced by e8b15e6 (sha1_file: Show the the type and path to corrupt
objects, 2010-06-10), was totally bogus. The function that knows which
bad object came from what packfile is has_packed_and_bad(); make it report
which packfile the problem was found.
"Corrupt" is already an adjective, e.g. an object is "corrupt"; we do not
have to say "corrupted object".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Change the error message that's displayed when we encounter corrupt
objects to be more specific. We now print the type (loose or packed)
of corrupted objects, along with the full path to the file in
question.
Before:
$ git cat-file blob 909ef997367880aaf2133bafa1f1a71aa28e09df
fatal: object 909ef997367880aaf2133bafa1f1a71aa28e09df is corrupted
After:
$ git cat-file blob 909ef997367880aaf2133bafa1f1a71aa28e09df
fatal: loose object 909ef997367880aaf2133bafa1f1a71aa28e09df (stored in .git/objects/90/9ef997367880aaf2133bafa1f1a71aa28e09df) is corrupted
Knowing the path helps to quickly analyze what's wrong:
$ file .git/objects/90/9ef997367880aaf2133bafa1f1a71aa28e09df
.git/objects/90/9ef997367880aaf2133bafa1f1a71aa28e09df: empty
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* jk/maint-sha1-file-name-fix:
remove over-eager caching in sha1_file_name
|
|
This function takes a sha1 and produces a loose object
filename. It caches the location of the object directory so
that it can fill the sha1 information directly without
allocating a new buffer (and in its original incarnation,
without calling getenv(), though these days we cache that
with the code in environment.c).
This cached base directory can become stale, however, if in
a single process git changes the location of the object
directory (e.g., by running setup_work_tree, which will
chdir to the new worktree).
In most cases this isn't a problem, because we tend to set
up the git repository location and do any chdir()s before
actually looking up any objects, so the first lookup will
cache the correct location. In the case of reset --hard,
however, we do something like:
1. look up the commit object
2. notice we are doing --hard, run setup_work_tree
3. look up the tree object to reset
Step (3) fails because our cache object directory value is
bogus.
This patch simply removes the caching. We use a static
buffer instead of allocating one each time (the original
version treated the malloc'd buffer as a static, so there is
no change in calling semantics).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* sp/maint-dumb-http-pack-reidx:
http.c::new_http_pack_request: do away with the temp variable filename
http-fetch: Use temporary files for pack-*.idx until verified
http-fetch: Use index-pack rather than verify-pack to check packs
Allow parse_pack_index on temporary files
Extract verify_pack_index for reuse from verify_pack
Introduce close_pack_index to permit replacement
http.c: Remove unnecessary strdup of sha1_to_hex result
http.c: Don't store destination name in request structures
http.c: Drop useless != NULL test in finish_http_pack_request
http.c: Tiny refactoring of finish_http_pack_request
t5550-http-fetch: Use subshell for repository operations
http.c: Remove bad free of static block
|
Junio C Hamano
Jim Meyering
Jonathan Nieder
Shawn O. Pearce
Nguyễn Thái Ngọc Duy
Björn Steinbrink
Ævar Arnfjörð Bjarmason
Jeff King