| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The configuration reader/writer uses mmap(2) interface to access
the files; when we find a directory, it barfed with "Out of memory?".
* jk/diagnose-config-mmap-failure:
xmmap(): drop "Out of memory?"
config.c: rewrite ENODEV into EISDIR when mmap fails
config.c: avoid xmmap error messages
config.c: fix mmap leak when writing config
read-cache.c: drop PROT_WRITE from mmap of index
|
|
The clean/smudge interface did not work well when filtering an
empty contents (failed and then passed the empty input through).
It can be argued that a filter that produces anything but empty for
an empty input is nonsense, but if the user wants to do strange
things, then why not?
* jh/filter-empty-contents:
sha1_file: pass empty buffer to index empty file
|
|
We show that message with die_errno(), but the OS is ought to know
why mmap(2) failed much better than we do. There is no reason for
us to say "Out of memory?" here.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The config-writing code uses xmmap to map the existing
config file, which will die if the map fails. This has two
downsides:
1. The error message is not very helpful, as it lacks any
context about the file we are mapping:
$ mkdir foo
$ git config --file=foo some.key value
fatal: Out of memory? mmap failed: No such device
2. We normally do not die in this code path; instead, we'd
rather report the error and return an appropriate exit
status (which is part of the public interface
documented in git-config.1).
This patch introduces a "gentle" form of xmmap which lets us
produce our own error message. We do not want to use mmap
directly, because we would like to use the other
compatibility elements of xmmap (e.g., handling 0-length
maps portably).
The end result is:
$ git.compile config --file=foo some.key value
error: unable to mmap 'foo': No such device
$ echo $?
3
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add the "--allow-unknown-type" option to "cat-file" to allow
inspecting loose objects of an experimental or a broken type.
* kn/cat-file-literally:
t1006: add tests for git cat-file --allow-unknown-type
cat-file: teach cat-file a '--allow-unknown-type' option
cat-file: make the options mutually exclusive
sha1_file: support reading from a loose object of unknown type
|
|
`git add` of an empty file with a filter pops complaints from
`copy_fd` about a bad file descriptor.
This traces back to these lines in sha1_file.c:index_core:
if (!size) {
ret = index_mem(sha1, NULL, size, type, path, flags);
The problem here is that content to be added to the index can be
supplied from an fd, or from a memory buffer, or from a pathname. This
call is supplying a NULL buffer pointer and a zero size.
Downstream logic takes the complete absence of a buffer to mean the
data is to be found elsewhere -- for instance, these, from convert.c:
if (params->src) {
write_err = (write_in_full(child_process.in, params->src, params->size) < 0);
} else {
write_err = copy_fd(params->fd, child_process.in);
}
~If there's a buffer, write from that, otherwise the data must be coming
from an open fd.~
Perfectly reasonable logic in a routine that's going to write from
either a buffer or an fd.
So change `index_core` to supply an empty buffer when indexing an empty
file.
There's a patch out there that instead changes the logic quoted above to
take a `-1` fd to mean "use the buffer", but it seems to me that the
distinction between a missing buffer and an empty one carries intrinsic
semantics, where the logic change is adapting the code to handle
incorrect arguments.
Signed-off-by: Jim Hill <gjthill@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"hash-object --literally" introduced in v2.2 was not prepared to
take a really long object type name.
* jc/hash-object:
write_sha1_file(): do not use a separate sha1[] array
t1007: add hash-object --literally tests
hash-object --literally: fix buffer overrun with extra-long object type
git-hash-object.txt: document --literally option
|
|
* jk/sha1-file-reduce-useless-warnings:
sha1_file: squelch "packfile cannot be accessed" warnings
|
|
A replacement for contrib/workdir/git-new-workdir that does not
rely on symbolic links and make sharing of objects and refs safer
by making the borrowee and borrowers aware of each other.
* nd/multiple-work-trees: (41 commits)
prune --worktrees: fix expire vs worktree existence condition
t1501: fix test with split index
t2026: fix broken &&-chain
t2026 needs procondition SANITY
git-checkout.txt: a note about multiple checkout support for submodules
checkout: add --ignore-other-wortrees
checkout: pass whole struct to parse_branchname_arg instead of individual flags
git-common-dir: make "modules/" per-working-directory directory
checkout: do not fail if target is an empty directory
t2025: add a test to make sure grafts is working from a linked checkout
checkout: don't require a work tree when checking out into a new one
git_path(): keep "info/sparse-checkout" per work-tree
count-objects: report unused files in $GIT_DIR/worktrees/...
gc: support prune --worktrees
gc: factor out gc.pruneexpire parsing code
gc: style change -- no SP before closing parenthesis
checkout: clean up half-prepared directories in --to mode
checkout: reject if the branch is already checked out elsewhere
prune: strategies for linked checkouts
checkout: support checking out into a new working directory
...
|
|
Update sha1_loose_object_info() to optionally allow it to read
from a loose object file of unknown/bogus type; as the function
usually returns the type of the object it read in the form of enum
for known types, add an optional "typename" field to receive the
name of the type in textual form and a flag to indicate the reading
of a loose object file of unknown/bogus type.
Add parse_sha1_header_extended() which acts as a wrapper around
parse_sha1_header() allowing more information to be obtained.
Add unpack_sha1_header_to_strbuf() to unpack sha1 headers of
unknown/corrupt objects which have a unknown sha1 header size to
a strbuf structure. This was written by Junio C Hamano but tested
by me.
Helped-by: Junio C Hamano <gitster@pobox.com>
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Helped-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Hepled-by: Jeff King <peff@peff.net>
Signed-off-by: Karthik Nayak <karthik.188@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Access to objects in repositories that borrow from another one on a
slow NFS server unnecessarily got more expensive due to recent code
becoming more cautious in a naive way not to lose objects to pruning.
* jk/prune-mtime:
sha1_file: only freshen packs once per run
sha1_file: freshen pack objects before loose
reachable: only mark local objects as recent
|
|
In the beginning, write_sha1_file() did not have a way to tell the
caller the name of the object it wrote to the caller. This was
changed in d6d3f9d0 (This implements the new "recursive tree"
write-tree., 2005-04-09) by adding the "returnsha1" parameter to the
function so that the callers who are interested in the value can
optionally pass a pointer to receive it.
It turns out that all callers do want to know the name of the object
it just has written. Nobody passes a NULL to this parameter, hence
it is not necessary to use a separate sha1[] array to receive the
result from write_sha1_file_prepare(), and copy the result to the
returnsha1 supplied by the caller.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"hash-object" learned in 5ba9a93 (hash-object: add --literally
option, 2014-09-11) to allow crafting a corrupt/broken object of
unknown type.
When the user-provided type is particularly long, however, it can
overflow the relatively small stack-based character array handed to
write_sha1_file_prepare() by hash_sha1_file() and write_sha1_file(),
leading to stack corruption (and crash). Introduce a custom helper
to allow arbitrarily long typenames just for "hash-object --literally".
[jc: Eric's original used a strbuf in the more common codepaths, and
I rewrote it to avoid penalizing the non-literally code. Bugs are mine]
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Since 33d4221 (write_sha1_file: freshen existing objects,
2014-10-15), we update the mtime of existing objects that we
would have written out (had they not existed). For the
common case in which many objects are packed, we may update
the mtime on a single packfile repeatedly. This can result
in a noticeable performance problem if calling utime() is
expensive (e.g., because your storage is on NFS).
We can fix this by keeping a per-pack flag that lets us
freshen only once per program invocation.
An alternative would be to keep the packed_git.mtime flag up
to date as we freshen, and freshen only once every N
seconds. In practice, it's not worth the complexity. We are
racing against prune expiration times here, which inherently
must be set to accomodate reasonable program running times
(because they really care about the time between an object
being written and it becoming referenced, and the latter is
typically the last step a program takes).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When writing out an object file, we first check whether it
already exists and if so optimize out the write. Prior to
33d4221, we did this by calling has_sha1_file(), which will
check for packed objects followed by loose. Since that
commit, we check loose objects first.
For the common case of a repository whose objects are mostly
packed, this means we will make a lot of extra access()
system calls checking for loose objects. We should follow
the same packed-then-loose order that all of our other
lookups use.
Reported-by: Stefan Saasen <ssaasen@atlassian.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When pruning and repacking a repository that has an
alternate object store configured, we may traverse a large
number of objects in the alternate. This serves no purpose,
and may be expensive to do. A longer explanation is below.
Commits d3038d2 and abcb865 taught prune and pack-objects
(respectively) to treat "recent" objects as tips for
reachability, so that we keep whole chunks of history. They
built on the object traversal in 660c889 (sha1_file: add
for_each iterators for loose and packed objects,
2014-10-15), which covers both local and alternate objects.
In both cases, covering alternate objects is unnecessary, as
both commands can only drop objects from the local
repository. In the case of prune, we traverse only the local
object directory. And in the case of repacking, while we may
or may not include local objects in our pack, we will never
reach into the alternate with "repack -d". The "-l" option
is only a question of whether we are migrating objects from
the alternate into our repository, or leaving them
untouched.
It is possible that we may drop an object that is depended
upon by another object in the alternate. For example,
imagine two repositories, A and B, with A pointing to B as
an alternate. Now imagine a commit that is in B which
references a tree that is only in A. Traversing from recent
objects in B might prevent A from dropping that tree. But
this case isn't worth covering. Repo B should take
responsibility for its own objects. It would never have had
the commit in the first place if it did not also have the
tree, and assuming it is using the same "keep recent chunks
of history" scheme, then it would itself keep the tree, as
well.
So checking the alternate objects is not worth doing, and
come with a significant performance impact. In both cases,
we skip any recent objects that have already been marked
SEEN (i.e., that we know are already reachable for prune, or
included in the pack for a repack). So there is a slight
waste of time in opening the alternate packs at all, only to
notice that we have already considered each object. But much
worse, the alternate repository may have a large number of
objects that are not reachable from the local repository at
all, and we end up adding them to the traversal.
We can fix this by considering only local unseen objects.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When we find an object in a packfile index, we make sure we
can still open the packfile itself (or that it is already
open), as it might have been deleted by a simultaneous
repack. If we can't access the packfile, we print a warning
for the user and tell the caller that we don't have the
object (we can then look in other packfiles, or find a loose
version, before giving up).
The warning we print to the user isn't really accomplishing
anything, and it is potentially confusing to users. In the
normal case, it is complete noise; we find the object
elsewhere, and the user does not have to care that we racily
saw a packfile index that became stale. It didn't affect the
operation at all.
A possibly more interesting case is when we later can't find
the object, and report failure to the user. In this case the
warning could be considered a clue toward that ultimate
failure. But it's not really a useful clue in practice. We
wouldn't even print it consistently (since we are racing
with another process, we might not even see the .idx file,
or we might win the race and open the packfile, completing
the operation).
This patch drops the warning entirely (not only from the
fill_pack_entry site, but also from an identical use in
pack-objects). If we did find the warning interesting in the
error case, we could stuff it away and reveal it to the user
when we later die() due to the broken object. But that
complexity just isn't worth it.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Code simplification.
* rs/deflate-init-cleanup:
zlib: initialize git_zstream in git_deflate_init{,_gzip,_raw}
|
|
Clear the git_zstream variable at the start of git_deflate_init() etc.
so that callers don't have to do that.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In v2.2.0, we broke "git prune" that runs in a repository that
borrows from an alternate object store.
* jk/prune-mtime:
sha1_file: fix iterating loose alternate objects
for_each_loose_file_in_objdir: take an optional strbuf path
|
|
The string in 'base' contains a path suffix to a specific object;
when its value is used, the suffix must either be filled (as in
stat_sha1_file, open_sha1_file, check_and_freshen_nonlocal) or
cleared (as in prepare_packed_git) to avoid junk at the end.
660c889e (sha1_file: add for_each iterators for loose and packed
objects, 2014-10-15) introduced loose_from_alt_odb(), but this did
neither and treated 'base' as a complete path to the "base" object
directory, instead of a pointer to the "base" of the full path
string.
The trailing path after 'base' is still initialized to NUL, hiding
the bug in some common cases. Additionally the descendent
for_each_file_in_obj_subdir() function swallows ENOENT, so an error
only shows if the alternate's path was last filled with a valid
object (where statting /path/to/existing/00/0bjectfile/00 fails).
Signed-off-by: Jonathon Mah <me@JonathonMah.com>
Helped-by: Kyle J. McKay <mackyle@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We feed a root "objdir" path to this iterator function,
which then copies the result into a strbuf, so that it can
repeatedly append the object sub-directories to it. Let's
make it easy for callers to just pass us a strbuf in the
first place.
We leave the original interface as a convenience for callers
who want to just pass a const string like the result of
get_object_directory().
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Before the previous commit, get_pathname returns an array of PATH_MAX
length. Even if git_path() and similar functions does not use the
whole array, git_path() caller can, in theory.
After the commit, get_pathname() may return a buffer that has just
enough room for the returned string and git_path() caller should never
write beyond that.
Make git_path(), mkpath() and git_path_submodule() return a const
buffer to make sure callers do not write in it at all.
This could have been part of the previous commit, but the "const"
conversion is too much distraction from the core changes in path.c.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The new name is more consistent with the names of other
string_list-related functions.
Suggested-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Tighten the logic to decide that an unreachable cruft is
sufficiently old by covering corner cases such as an ancient object
becoming reachable and then going unreachable again, in which case
its retention period should be prolonged.
* jk/prune-mtime: (28 commits)
drop add_object_array_with_mode
revision: remove definition of unused 'add_object' function
pack-objects: double-check options before discarding objects
repack: pack objects mentioned by the index
pack-objects: use argv_array
reachable: use revision machinery's --indexed-objects code
rev-list: add --indexed-objects option
rev-list: document --reflog option
t5516: test pushing a tag of an otherwise unreferenced blob
traverse_commit_list: support pending blobs/trees with paths
make add_object_array_with_context interface more sane
write_sha1_file: freshen existing objects
pack-objects: match prune logic for discarding objects
pack-objects: refactor unpack-unreachable expiration check
prune: keep objects reachable from recent objects
sha1_file: add for_each iterators for loose and packed objects
count-objects: use for_each_loose_file_in_objdir
count-objects: do not use xsize_t when counting object size
prune-packed: use for_each_loose_file_in_objdir
reachable: mark index blobs as SEEN
...
|
|
When we try to write a loose object file, we first check
whether that object already exists. If so, we skip the
write as an optimization. However, this can interfere with
prune's strategy of using mtimes to mark files in progress.
For example, if a branch contains a particular tree object
and is deleted, that tree object may become unreachable, and
have an old mtime. If a new operation then tries to write
the same tree, this ends up as a noop; we notice we
already have the object and do nothing. A prune running
simultaneously with this operation will see the object as
old, and may delete it.
We can solve this by "freshening" objects that we avoid
writing by updating their mtime. The algorithm for doing so
is essentially the same as that of has_sha1_file. Therefore
we provide a new (static) interface "check_and_freshen",
which finds and optionally freshens the object. It's trivial
to implement freshening and simple checking by tweaking a
single parameter.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We typically iterate over the reachable objects in a
repository by starting at the tips and walking the graph.
There's no easy way to iterate over all of the objects,
including unreachable ones. Let's provide a way of doing so.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Prune has to walk $GIT_DIR/objects/?? in order to find the
set of loose objects to prune. Other parts of the code
(e.g., count-objects) want to do the same. Let's factor it
out into a reusable for_each-style function.
Note that this is not quite a straight code movement. The
original code had strange behavior when it found a file of
the form "[0-9a-f]{2}/.{38}" that did _not_ contain all hex
digits. It executed a "break" from the loop, meaning that we
stopped pruning in that directory (but still pruned other
directories!). This was probably a bug; we do not want to
process the file as an object, but we should keep going
otherwise (and that is how the new code handles it).
We are also a little more careful with loose object
directories which fail to open. The original code silently
ignored any failures, but the new code will complain about
any problems besides ENOENT.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We check the return value of the callback and stop iterating
if it is non-zero. However, we do not make the non-zero
return value available to the caller, so they have no way of
knowing whether the operation succeeded or not (technically
they can keep their own error flag in the callback data, but
that is unlike our other for_each functions).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The lockfile API and its users have been cleaned up.
* mh/lockfile: (38 commits)
lockfile.h: extract new header file for the functions in lockfile.c
hold_locked_index(): move from lockfile.c to read-cache.c
hold_lock_file_for_append(): restore errno before returning
get_locked_file_path(): new function
lockfile.c: rename static functions
lockfile: rename LOCK_NODEREF to LOCK_NO_DEREF
commit_lock_file_to(): refactor a helper out of commit_lock_file()
trim_last_path_component(): replace last_path_elm()
resolve_symlink(): take a strbuf parameter
resolve_symlink(): use a strbuf for internal scratch space
lockfile: change lock_file::filename into a strbuf
commit_lock_file(): use a strbuf to manage temporary space
try_merge_strategy(): use a statically-allocated lock_file object
try_merge_strategy(): remove redundant lock_file allocation
struct lock_file: declare some fields volatile
lockfile: avoid transitory invalid states
git_config_set_multivar_in_file(): avoid call to rollback_lock_file()
dump_marks(): remove a redundant call to rollback_lock_file()
api-lockfile: document edge cases
commit_lock_file(): rollback lock file on failure to rename
...
|
|
When running a required clean filter, we do not have to mmap the
original before feeding the filter. Instead, stream the file
contents directly to the filter and process its output.
* sp/stream-clean-filter:
sha1_file: don't convert off_t to size_t too early to avoid potential die()
convert: stream from fd to required clean filter to reduce used address space
copy_fd(): do not close the input file descriptor
mmap_limit: introduce GIT_MMAP_LIMIT to allow testing expected mmap size
memory_limit: use git_env_ulong() to parse GIT_ALLOC_LIMIT
config.c: add git_env_ulong() to parse environment variable
convert: drop arguments other than 'path' from would_convert_to_git()
|
|
Move the interface declaration for the functions in lockfile.c from
cache.h to a new file, lockfile.h. Add #includes where necessary (and
remove some redundant includes of cache.h by files that already
include builtin.h).
Move the documentation of the lock_file state diagram from lockfile.c
to the new header file.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
xsize_t() checks if an off_t argument can be safely converted to
a size_t return value. If the check is executed too early, it could
fail for large files on 32-bit architectures even if the size_t code
path is not taken. Other paths might be able to handle the large file.
Specifically, index_stream_convert_blob() is able to handle a large file
if a filter is configured that returns a small result.
Signed-off-by: Steffen Prohaska <prohaska@zib.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Teach a few codepaths to punt (instead of dying) when large blobs
that would not fit in core are involved in the operation.
* nd/large-blobs:
diff: shortcut for diff'ing two binary SHA-1 objects
diff --stat: mark any file larger than core.bigfilethreshold binary
diff.c: allow to pass more flags to diff_populate_filespec
sha1_file.c: do not die failing to malloc in unpack_compressed_entry
wrapper.c: introduce gentle xmallocz that does not die()
|
|
Reduce the use of fixed sized buffer passed to getcwd() calls
by introducing xgetcwd() helper.
* rs/strbuf-getcwd:
use strbuf_add_absolute_path() to add absolute paths
abspath: convert absolute_path() to strbuf
use xgetcwd() to set $GIT_DIR
use xgetcwd() to get the current directory or die
wrapper: add xgetcwd()
abspath: convert real_path_internal() to strbuf
abspath: use strbuf_getcwd() to remember original working directory
setup: convert setup_git_directory_gently_1 et al. to strbuf
unix-sockets: use strbuf_getcwd()
strbuf: add strbuf_getcwd()
|
|
The data is streamed to the filter process anyway. Better avoid mapping
the file if possible. This is especially useful if a clean filter
reduces the size, for example if it computes a sha1 for binary data,
like git media. The file size that the previous implementation could
handle was limited by the available address space; large files for
example could not be handled with (32-bit) msysgit. The new
implementation can filter files of any size as long as the filter output
is small enough.
The new code path is only taken if the filter is required. The filter
consumes data directly from the fd. If it fails, the original data is
not immediately available. The condition can easily be handled as
a fatal error, which is expected for a required filter anyway.
If the filter was not required, the condition would need to be handled
in a different way, like seeking to 0 and reading the data. But this
would require more restructuring of the code and is probably not worth
it. The obvious approach of falling back to reading all data would not
help achieving the main purpose of this patch, which is to handle large
files with limited address space. If reading all data is an option, we
can simply take the old code path right away and mmap the entire file.
The environment variable GIT_MMAP_LIMIT, which has been introduced in
a previous commit is used to test that the expected code path is taken.
A related test that exercises required filters is modified to verify
that the data actually has been modified on its way from the file system
to the object store.
Signed-off-by: Steffen Prohaska <prohaska@zib.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In order to test expectations about mmap in a way similar to testing
expectations about malloc with GIT_ALLOC_LIMIT introduced by
d41489a6 (Add more large blob test cases, 2012-03-07), introduce a
new environment variable GIT_MMAP_LIMIT to limit the largest allowed
mmap length.
xmmap() is modified to check the size of the requested region and
fail it if it is beyond the limit. Together with GIT_ALLOC_LIMIT
tests can now confirm expectations about memory consumption.
Signed-off-by: Steffen Prohaska <prohaska@zib.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
It is only the path that matters in the decision whether to filter
or not. Clarify this by making path the only argument of
would_convert_to_git().
Signed-off-by: Steffen Prohaska <prohaska@zib.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Fewer die() gives better control to the caller, provided that the
caller _can_ handle it. And in unpack_compressed_entry() case, it can,
because unpack_compressed_entry() already returns NULL if it fails to
inflate data.
A side effect from this is fsck continues to run when very large blobs
are present (and do not fit in memory).
Noticed-by: Dale R. Worley <worley@alum.mit.edu>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* kb/perf-trace:
api-trace.txt: add trace API documentation
progress: simplify performance measurement by using getnanotime()
wt-status: simplify performance measurement by using getnanotime()
git: add performance tracing for git's main() function to debug scripts
trace: add trace_performance facility to debug performance issues
trace: add high resolution timer function to debug performance issues
trace: add 'file:line' to all trace output
trace: move code around, in preparation to file:line output
trace: add current timestamp to all trace output
trace: disable additional trace output for unit tests
trace: add infrastructure to augment trace output with additional info
sha1_file: change GIT_TRACE_PACK_ACCESS logging to use trace API
Documentation/git.txt: improve documentation of 'GIT_TRACE*' variables
trace: improve trace performance
trace: remove redundant printf format attribute
trace: consistently name the format parameter
trace: move trace declarations from cache.h to new trace.h
|
|
* ek/alt-odb-entry-fix:
sha1_file: do not add own object directory as alternate
|
|
* jk/strip-suffix:
prepare_packed_git_one: refactor duplicate-pack check
verify-pack: use strbuf_strip_suffix
strbuf: implement strbuf_strip_suffix
index-pack: use strip_suffix to avoid magic numbers
use strip_suffix instead of ends_with in simple cases
replace has_extension with ends_with
implement ends_with via strip_suffix
add strip_suffix function
sha1_file: replace PATH_MAX buffer with strbuf in prepare_packed_git_one()
|
|
Code to avoid adding the same alternate object store twice was
subtly broken for a long time, but nobody seems to have noticed.
* rs/fix-alt-odb-path-comparison:
sha1_file: avoid overrunning alternate object base string
|
|
When adding alternate object directories, we try not to add the
directory of the current repository to avoid cycles. Unfortunately,
that test was broken, since it compared an absolute with a relative
path.
Signed-off-by: Ephrim Khong <dr.khong@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This changes GIT_TRACE_PACK_ACCESS functionality as follows:
* supports the same options as GIT_TRACE (e.g. printing to stderr)
* no longer supports relative paths
* appends to the trace file rather than overwriting
Signed-off-by: Karsten Blees <blees@dcon.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* rs/fix-alt-odb-path-comparison:
sha1_file: avoid overrunning alternate object base string
|
|
While checking if a new alternate object database is a duplicate make
sure that old and new base paths have the same length before comparing
them with memcmp. This avoids overrunning the buffer of the existing
entry if the new one is longer and it stops rejecting foobar/ after
foo/ was already added.
Signed-off-by: Rene Scharfe <ls.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When we are reloading the list of packs, we check whether a
particular pack has been loaded. This is slightly tricky,
because we load packs based on the presence of their ".idx"
files, but record the name of the matching ".pack" file.
Therefore we want to compare their bases.
The existing code stripped off ".idx" from a file we found,
then compared that whole base length to strings containing
the ".pack" version. This meant we could end up comparing
bytes past what the ".pack" string contained, if the ".idx"
file name was much longer.
In practice, it worked OK because memcmp would end up seeing
a difference in the two strings and would return early
before hitting the full length. However, memcmp may
sometimes read extra bytes past a difference (e.g., because
it is comparing 64-bit words), or is even free to compare in
reverse order.
Furthermore, our memcmp made no guarantees that we matched
the whole pack name, up to ".pack". So "foo.idx" would match
"foo-bar.pack", which is wrong (but does not typically
happen, because our pack names have a fixed size).
We can fix both issues, avoid magic numbers, and document
that we expect to compare against a string with ".pack" by
using strip_suffix.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
These two are almost the same function, with the exception
that has_extension only matches if there is content before
the suffix. So ends_with(".exe", ".exe") is true, but
has_extension would not be.
This distinction does not matter to any of the callers,
though, and we can just replace uses of has_extension with
ends_with. We prefer the "ends_with" name because it is more
generic, and there is nothing about the function that
requires it to be used for file extensions.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Instead of using strbuf to create a message string in case a path is
too long for our fixed-size buffer, replace that buffer with a strbuf
and thus get rid of the limitation.
Helped-by: Duy Nguyen <pclouds@gmail.com>
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
Junio C Hamano
Jeff King
Jim Hill
Karthik Nayak
Eric Sunshine
René Scharfe
Jonathon Mah
Nguyễn Thái Ngọc Duy
Michael Haggerty
Steffen Prohaska
Ephrim Khong
Karsten Blees