| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The idea behind the sliding mmap window pack reader implementation
is to have multiple mmap regions active against the same pack file,
thereby allowing the process to mmap in only the active/hot sections
of the pack and reduce overall virtual address space usage.
To implement this we need to refactor the mmap related data
(pack_base, pack_use_cnt) out of struct packed_git and move them
into a new struct pack_window.
We are refactoring the code to support a single struct pack_window
per packfile, thereby emulating the prior behavior of mmap'ing the
entire pack file.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Rather than hardcoding the maximum number of bytes which can be
mmapped from pack files we should make this value configurable,
allowing the end user to increase or decrease this limit on a
per-repository basis depending on the size of the repository
and the capabilities of their operating system.
In general users should not need to manually tune such a low-level
setting within the core code, but being able to artifically limit
the number of bytes which we can mmap at once from pack files will
make it easier to craft test cases for the new mmap sliding window
implementation.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
The unpack_entry_gently function currently has only two callers:
the delta base resolution in sha1_file.c and the main loop of
pack-check.c. Both of these must change to using unpack_entry
directly when we implement sliding window mmap logic, so I'm doing
it earlier to help break down the change set.
This may cause a slight performance decrease for delta base
resolution as well as for pack-check.c's verify_packfile(), as
the pack use counter will be incremented and decremented for every
object that is unpacked.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
If ever new object types are added for future extensions then better
have current git version report them as "unknown" instead of
"corrupted".
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
We used to try loose objects first with sha1_object_info(), but packed
objects first with read_sha1_file(). Now, prefer packed objects over loose
ones with sha1_object_info(), too.
Usually the old behaviour would pose no problem, but when you tried to fix
a fscked up repository by inserting a known-good pack,
git cat-file $(git cat-file -t <sha1>) <sha1>
could fail, even when
git cat-file blob <sha1>
would _not_ fail. Worse, a repack would fail, too.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
* maint:
Nicer error messages in case saving an object to db goes wrong
|
|
Currently the error e.g. when pushing to a read-only repository is quite
confusing, this attempts to clean it up, unifies error reporting between
various object writers and uses error() on couple more places.
Signed-off-by: Petr Baudis <pasky@suse.cz>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Since keeping a pushed pack or exploding it into loose objects
should be a local repository decision this teaches receive-pack
to decide if it should call unpack-objects or index-pack --stdin
--fix-thin based on the setting of receive.unpackLimit and the
number of objects contained in the received pack.
If the number of objects (hdr_entries) in the received pack is
below the value of receive.unpackLimit (which is 5000 by default)
then we unpack-objects as we have in the past.
If the hdr_entries >= receive.unpackLimit then we call index-pack and
ask it to include our pid and hostname in the .keep file to make it
easier to identify why a given pack has been kept in the repository.
Currently this leaves every received pack as a kept pack. We really
don't want that as received packs will tend to be small. Instead we
want to delete the .keep file automatically after all refs have
been updated. That is being left as room for future improvement.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
* master: (90 commits)
gitweb: Better support for non-CSS aware web browsers
gitweb: Output also empty patches in "commitdiff" view
gitweb: Use git-for-each-ref to generate list of heads and/or tags
for-each-ref: "creator" and "creatordate" fields
Add --global option to git-repo-config.
pack-refs: Store the full name of the ref even when packing only tags.
git-clone documentation didn't mention --origin as equivalent of -o
Minor grammar fixes for git-diff-index.txt
link_temp_to_file: call adjust_shared_perm() only when we created the directory
Remove uneccessarily similar printf() from print_ref_list() in builtin-branch
pack-objects doesn't create random pack names
branch: work in subdirectories.
gitweb: Use 's' regexp modifier to secure against filenames with LF
gitweb: Secure against commit-ish/tree-ish with the same name as path
gitweb: esc_html() author in blame
git-svnimport: support for partial imports
link_temp_to_file: don't leave the path truncated on adjust_shared_perm failure
Move deny_non_fast_forwards handling completely into receive-pack.
revision traversal: --unpacked does not limit commit list anymore.
Continue traversal when rev-list --unpacked finds a packed commit.
...
|
|
* maint:
git-clone documentation didn't mention --origin as equivalent of -o
Minor grammar fixes for git-diff-index.txt
link_temp_to_file: call adjust_shared_perm() only when we created the directory
|
|
|
|
* maint:
pack-objects doesn't create random pack names
link_temp_to_file: don't leave the path truncated on adjust_shared_perm failure
|
|
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
This allows us to pass just the file name of a pack rather than
the complete path when we want pack-objects to consider its
contents as though they were loose objects. This can be helpful
if $GIT_OBJECT_DIRECTORY contains shell metacharacters which make
it cumbersome to pass complete paths safely in a shell script.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
* np/pack:
add the capability for index-pack to read from a stream
index-pack: compare only the first 20-bytes of the key.
git-repack: repo.usedeltabaseoffset
pack-objects: document --delta-base-offset option
allow delta data reuse even if base object is a preferred base
zap a debug remnant
let the GIT native protocol use offsets to delta base when possible
make pack data reuse compatible with both delta types
make git-pack-objects able to create deltas with offset to base
teach git-index-pack about deltas with offset to base
teach git-unpack-objects about deltas with offset to base
introduce delta objects with offset to base
|
|
Supposing that both the base and result sizes were both full size 64-bit
values, their encoding would occupy only 9.2 bytes each. Therefore
inflating 64 bytes is way overkill. Limit it to 20 bytes instead which
should be plenty enough for a couple years to come.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Move file name generation from write_sha1_file_prepare() to the one
caller that cares and make it a void function.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
There are no callers of write_sha1_file_prepare() left outside of
sha1_file.c, so make it static.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Most callers of write_sha1_file_prepare() are only interested in the
resulting hash but don't care about the returned file name or the header.
This patch adds a simple wrapper named hash_sha1_file() which does just
that, and converts potential callers.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
This is the missing part to git-pack-objects allowing it to reuse delta
data to/from any of the two delta types. It can reuse delta from any
type, and it outputs base offsets when --allow-delta-base-offset is
provided and the base is also included in the pack. Otherwise it
outputs base sha1 references just like it always did.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
This adds a new object, namely OBJ_OFS_DELTA, renames OBJ_DELTA to
OBJ_REF_DELTA to better make the distinction between those two delta
objects, and adds support for the handling of those new delta objects
in sha1_file.c only.
The OBJ_OFS_DELTA contains a relative offset from the delta object's
position in a pack instead of the 20-byte SHA1 reference to identify
the base object. Since the base is likely to be not so far away, the
relative offset is more likely to have a smaller encoding on average
than an absolute offset. And for those delta objects the base must
always be stored first because there is no way to know the distance of
later objects when streaming a pack. Hence this relative offset is
always meant to be negative.
The offset encoding is slightly denser than the one used for object
size -- credits to <linux@horizon.com> (whoever this is) for bringing
it to my attention.
This allows for pack size reduction between 3.2% (Linux-2.6) to over 5%
(linux-historic). Runtime pack access should be faster too since delta
replay does skip a search in the pack index for each delta in a chain.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Those cleanups are mainly to set the table for the support of deltas
with base objects referenced by offsets instead of sha1. This means
that many pack lookup functions are converted to take a pack/offset
tuple instead of a sha1.
This eliminates many struct pack_entry usages since this structure
carried redundent information in many cases, and it increased stack
footprint needlessly for a couple recursively called functions that used
to declare a local copy of it for every recursion loop.
In the process, packed_object_info_detail() has been reorganized as well
so to look much saner and more amenable to deltas with offset support.
Finally the appropriate adjustments have been made to functions that
depend on the above changes. But there is no functionality changes yet
simply some code refactoring at this point.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
builtin-mailinfo.c has its own hexval implementaiton but it can
share the table-lookup one recently implemented in sha1_file.c
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
* jc/pack:
pack-objects: document --revs, --unpacked and --all.
pack-objects --unpacked=<existing pack> option.
pack-objects: further work on internal rev-list logic.
pack-objects: run rev-list equivalent internally.
Separate object listing routines out of rev-list
|
|
The function appeared high on a gprof output for a rev-list run of
a non-trivial size, and it was an obvious low-hanging fruit.
The code is from Linus.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Incremental repack without -a essentially boils down to:
rev-list --objects --unpacked --all |
pack-objects $new_pack
which picks up all loose objects that are still live and creates
a new pack.
This implements --unpacked=<existing pack> option to tell the
revision walking machinery to pretend as if objects in such a
pack are unpacked for the purpose of object listing. With this,
we could say:
rev-list --objects --unpacked=$active_pack --all |
pack-objects $new_pack
instead, to mean "all live loose objects but pretend as if
objects that are in this pack are also unpacked". The newly
created pack would be perfect for updating $active_pack by
replacing it.
Since pack-objects now knows how to do the rev-list's work
itself internally, you can also write the above example by:
pack-objects --unpacked=$active_pack --all $new_pack </dev/null
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
When copying from an existing pack and when copying from a loose
object with new style header, the code makes sure that the piece
we are going to copy out inflates well and inflate() consumes
the data in full while doing so.
The check to see if the xdelta really apply is quite expensive
as you described, because you would need to have the image of
the base object which can be represented as a delta against
something else.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Like xmalloc and xrealloc xstrdup dies with a useful message if
the native strdup() implementation returns NULL rather than a
valid pointer.
I just tried to use xstrdup in new code and found it to be missing.
However I expected it to be present as xmalloc and xrealloc are
already commonly used throughout the code.
[jc: removed the part that deals with last_XXX, which I am
finding more and more dubious these days.]
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Also while we are at it, remove redundant typename[] array from
unpack_sha1_header. The only reason it is different from the
type_names[] array in object.c module is that this code cares
about the subset of object types that are valid in a loose
object, so prepare a separate array of boolean that tells us
which types are valid, and share the name translation with the
others.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Signed-off-by: Jonas Fonseca <fonseca@diku.dk>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Change places that use realloc, without a proper error path, to instead use
xrealloc. Drop an erroneous error path in the daemon code that used errno
in the die message in favour of the simpler xrealloc.
Signed-off-by: Jonas Fonseca <fonseca@diku.dk>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Change unpack_entry_gently and its helper functions to use offsets
rather than addresses and left counts to supply pack position
information. In most cases this makes the code easier to follow,
and it reduces the number of local variables in a few functions.
It also better prepares this code for mapping partial segments of
packs and altering what regions of a pack are mapped while unpacking
an entry.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
If we're always incrementing both the offset and the pointer we
aren't gaining anything by keeping both. Instead just use the
offset since that's what we were given and what we are expected
to return. Also using offset is likely to make it easier to remap
the pack in the future should partial mapping of very large packs
get implemented.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
[PATCH 3/5] Cleanup unpack_entry_gently and friends to use type_name array.
This change allows combining all of the non-delta entries into a
single case, as well as to remove an unnecessary local variable
in unpack_entry_gently.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
[PATCH 2/5] Reuse compression code in unpack_compressed_entry.
This cleans up the code by reusing a perfectly good decompression
implementation at the expense of 1 extra byte of memory allocated in
temporary memory while the delta is being decompressed and applied
to the base.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
This function was moved above unpack_delta_entry so we can call it
from within unpack_delta_entry without a forward declaration.
This change looks worse than it is. Its really just a relocation
of unpack_non_delta_entry to earlier in the file and renaming the
function to unpack_compressed_entry. No other changes were made.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
This abstracts away the size of the hash values when copying them
from memory location to memory location, much as the introduction
of hashcmp abstracted away hash value comparsion.
A few call sites were using char* rather than unsigned char* so
I added the cast rather than open hashcpy to be void*. This is a
reasonable tradeoff as most call sites already use unsigned char*
and the existing hashcmp is also declared to be unsigned char*.
[jc: Splitted the patch to "master" part, to be followed by a
patch for merge-recursive.c which is not in "master" yet.
Fixed the cast in the latter hunk to combine-diff.c which was
wrong in the original.
Also converted ones left-over in combine-diff.c, diff-lib.c and
upload-pack.c ]
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
This declaration probably used to be necessary but the code has
been refactored since to use unpack_entry_gently instead.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
If the pack format were to ever change or be extended in the future
there is no assurance that just because the pack file lives in
objects/pack and doesn't end in .idx that we can read and decompress
its contents properly.
If we encounter what we think is a pack file and it isn't or we don't
recognize its version then die and suggest to the user that they
upgrade to a newer version of GIT which can handle that pack file.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Introduces global inline:
hashcmp(const unsigned char *sha1, const unsigned char *sha2)
Uses memcmp for comparison and returns the result based on the length of
the hash name (a future runtime decision).
Acked-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: David Rientjes <rientjes@google.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
[jc: I needed to hand merge the changes to the updated codebase,
so the result needs to be checked.]
Signed-off-by: David Rientjes <rientjes@google.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
|
|
As Fredrik points out the current interface of has_extension() is
potentially confusing. Its parameters include both a nul-terminated
string and a length-limited string.
This patch drops the length argument, requiring two nul-terminated
strings; all callsites are updated. I checked that all of them indeed
provide nul-terminated strings. Filenames need to be nul-terminated
anyway if they are to be passed to open() etc. The performance penalty
of the additional strlen() is negligible compared to the system calls
which inevitably surround has_extension() calls.
Additionally, change has_extension() to use size_t inside instead of
int, as that is the exact type strlen() returns and memcmp() expects.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
The little helper has_extension() documents through its name what we are
trying to do and makes sure we don't forget the underrun check.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
This exposes map_sha1_file() interface to mmap a loose object file,
and legacy_loose_object() function, split from unpack_sha1_header().
They will be used in the next patch to reuse the deflated data from
new-style loose object files when generating packs.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
* lt/objformat:
sha1_file: add the ability to parse objects in "pack file format"
|
|
The pack-file format is slightly different from the traditional git
object format, in that it has a much denser binary header encoding.
The traditional format uses an ASCII string with type and length
information, which is somewhat wasteful.
A new object format starts with uncompressed binary header
followed by compressed payload -- this will allow us later to
copy the payload straight to packfiles.
Obviously they cannot be read by older versions of git, so for
now new object files are created with the traditional format.
core.legacyheaders configuration item, when set to false makes
the code write in new format for people to experiment with.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Linus Torvalds <torvalds@osdl.org> wrote:
It's entirely possible that we should just make that whole
if (ret == ENOENT)
go away. Yes, it's the right error code if a subdirectory is missing, and
yes, POSIX requires it, and yes, WXP is probably just a horrible piece of
sh*t, but on the other hand, I don't think git really has any serious
reason to even care.
|
Shawn O. Pearce
Nicolas Pitre
Johannes Schindelin
Junio C Hamano
Petr Baudis
Rene Scharfe
Jonas Fonseca
David Rientjes
Linus Torvalds