| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
A platform might not support open(2) with O_CLOEXEC but may support
telling the same with fcntl(2) to flip FD_CLOEXEC bit on on an open
file descriptor. It is a fallback that is inherently racy and this
may not be worth doing, though.
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The way we structured the fallback/retry mechanism for opening with
O_NOATIME and O_CLOEXEC meant that if we failed due to lack of
support to open the file with O_NOATIME option (i.e. EINVAL), we
would still try to drop O_CLOEXEC first and retry, and then drop
O_NOATIME. A platform on which O_NOATIME is defined in the header
without support from the kernel wouldn't have a chance to open with
O_CLOEXEC option due to this code structure.
Arguably, O_CLOEXEC is more important than O_NOATIME, as the latter
is mostly about performance, while the former can affect correctness.
Instead use O_CLOEXEC to open the file, and then use fcntl(2) to set
O_NOATIME on the resulting file descriptor. open(2) itself does not
cause atime to be updated according to Linus [*1*].
The helper to do the former can be usable in the codepath in
ce_compare_data() that was recently added to open a file descriptor
with O_CLOEXEC; use it while we are at it.
*1* <CA+55aFw83E+zOd+z5h-CA-3NhrLjVr-anL6pubrSWttYx3zu8g@mail.gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
All processes that the Git main process spawns inherit the open file
descriptors of the main process. These leaked file descriptors can
cause problems.
Use the O_CLOEXEC flag similar to 05d1ed61 to fix the leaked file
descriptors.
Signed-off-by: Lars Schneider <larsxschneider@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This function is meant to be used when reading from files in the
object store, and the original objective was to avoid smudging atime
of loose object files too often, hence its name. Because we'll be
extending its role in the next commit to also arrange the file
descriptors they return auto-closed in the child processes, rename
it to lose "noatime" part that is too specific.
Signed-off-by: Lars Schneider <larsxschneider@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Codepaths involved in interacting alternate object store have
been cleaned up.
* jk/alt-odb-cleanup:
alternates: use fspathcmp to detect duplicates
sha1_file: always allow relative paths to alternates
count-objects: report alternates via verbose mode
fill_sha1_file: write into a strbuf
alternates: store scratch buffer as strbuf
fill_sha1_file: write "boring" characters
alternates: use a separate scratch space
alternates: encapsulate alt->base munging
alternates: provide helper for allocating alternate
alternates: provide helper for adding to alternates list
link_alt_odb_entry: refactor string handling
link_alt_odb_entry: handle normalize_path errors
t5613: clarify "too deep" recursion tests
t5613: do not chdir in main process
t5613: whitespace/style cleanups
t5613: use test_must_fail
t5613: drop test_valid_repo function
t5613: drop reachable_via function
|
|
"git pack-objects" in a repository with many packfiles used to
spend a lot of time looking for/at objects in them; the accesses to
the packfiles are now optimized by checking the most-recently-used
packfile first.
* jk/pack-objects-optim-mru:
pack-objects: use mru list when iterating over packs
pack-objects: break delta cycles before delta-search phase
sha1_file: make packed_object_info public
provide an initializer for "struct object_info"
|
|
On a case-insensitive filesystem, we should realize that
"a/objects" and "A/objects" are the same path. We already
use fspathcmp() to check against the main object directory,
but until recently we couldn't use it for comparing against
other alternates (because their paths were not
NUL-terminated strings). But now we can, so let's do so.
Note that we also need to adjust count-objects to load the
config, so that it can see the setting of core.ignorecase
(this is required by the test, but is also a general bugfix
for users of count-objects).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We recursively expand alternates repositories, so that if A
borrows from B which borrows from C, A can see all objects.
For the root object database, we allow relative paths, so A
can point to B as "../B/objects". However, we currently do
not allow relative paths when recursing, so B must use an
absolute path to reach C.
That is an ancient protection from c2f493a (Transitively
read alternatives, 2006-05-07) that tries to avoid adding
the same alternate through two different paths. Since
5bdf0a8 (sha1_file: normalize alt_odb path before comparing
and storing, 2011-09-07), we use a normalized absolute path
for each alt_odb entry.
This means that in most cases the protection is no longer
necessary; we will detect the duplicate no matter how we got
there (but see below). And it's a good idea to get rid of
it, as it creates an unnecessary complication when setting
up recursive alternates (B has to know that A is going to
borrow from it and make sure to use an absolute path).
Note that our normalization doesn't actually look at the
filesystem, so it can still be fooled by crossing symbolic
links. But that's also true of absolute paths, so it's not a
good reason to disallow only relative paths (it's
potentially a reason to switch to real_path(), but that's a
separate and non-trivial change).
We adjust the test script here to demonstrate that this now
works, and add new tests to show that the normalization does
indeed suppress duplicates.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
It's currently the responsibility of the caller to give
fill_sha1_file() enough bytes to write into, leading them to
manually compute the required lengths. Instead, let's just
write into a strbuf so that it's impossible to get this
wrong.
The alt_odb caller already has a strbuf, so this makes
things strictly simpler. The other caller, sha1_file_name(),
uses a static PATH_MAX buffer and dies when it would
overflow. We can convert this to a static strbuf, which
means our allocation cost is amortized (and as a bonus, we
no longer have to worry about PATH_MAX being too short for
normal use).
This does introduce some small overhead in fill_sha1_file(),
as each strbuf_addchar() will check whether it needs to
grow. However, between the optimization in fec501d
(strbuf_addch: avoid calling strbuf_grow, 2015-04-16) and
the fact that this is not generally called in a tight loop
(after all, the next step is typically to access the file!)
this probably doesn't matter. And even if it did, the right
place to micro-optimize is inside fill_sha1_file(), by
calling a single strbuf_grow() there.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We pre-size the scratch buffer to hold a loose object
filename of the form "xx/yyyy...", which leads to allocation
code that is hard to verify. We have to use some magic
numbers during the initial allocation, and then writers must
blindly assume that the buffer is big enough. Using a strbuf
makes it more clear that we cannot overflow.
Unfortunately, we do still need some magic numbers to grow
our strbuf before calling fill_sha1_path(), but the strbuf
growth is much closer to the point of use. This makes it
easier to see that it's correct, and opens the possibility
of pushing it even further down if fill_sha1_path() learns
to work on strbufs.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This function forms a sha1 as "xx/yyyy...", but skips over
the slot for the slash rather than writing it, leaving it to
the caller to do so. It also does not bother to put in a
trailing NUL, even though every caller would want it (we're
forming a path which by definition is not a directory, so
the only thing to do with it is feed it to a system call).
Let's make the lives of our callers easier by just writing
out the internal "/" and the NUL.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The alternate_object_database struct uses a single buffer
both for storing the path to the alternate, and as a scratch
buffer for forming object names. This is efficient (since
otherwise we'd end up storing the path twice), but it makes
life hard for callers who just want to know the path to the
alternate. They have to remember to stop reading after
"alt->name - alt->base" bytes, and to subtract one for the
trailing '/'.
It would be much simpler if they could simply access a
NUL-terminated path string. We could encapsulate this in a
function which puts a NUL in the scratch buffer and returns
the string, but that opens up questions about the lifetime
of the result. The first time another caller uses the
alternate, the scratch buffer may get other data tacked onto
it.
Let's instead just store the root path separately from the
scratch buffer. There aren't enough alternates being stored
for the duplicated data to matter for performance, and this
keeps things simple and safe for the callers.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The alternate_object_database struct holds a path to the
alternate objects, but we also use that buffer as scratch
space for forming loose object filenames. Let's pull that
logic into a helper function so that we can more easily
modify it.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Allocating a struct alternate_object_database is tricky, as
we must over-allocate the buffer to provide scratch space,
and then put in particular '/' and NUL markers.
Let's encapsulate this in a function so that the complexity
doesn't leak into callers (and so that we can modify it
later).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The submodule code wants to temporarily add an alternate
object store to our in-memory alt_odb list, but does it
manually. Let's provide a helper so it can reuse the code in
link_alt_odb_entry().
While we're adding our new add_to_alternates_memory(), let's
document add_to_alternates_file(), as the two are related.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The string handling in link_alt_odb_entry() is mostly an
artifact of the original version, which took the path as a
ptr/len combo, and did not have a NUL-terminated string
until we created one in the alternate_object_database
struct. But since 5bdf0a8 (sha1_file: normalize alt_odb
path before comparing and storing, 2011-09-07), the first
thing we do is put the path into a strbuf, which gives us
some easy opportunities for cleanup.
In particular:
- we call strlen(pathbuf.buf), which is silly; we can look
at pathbuf.len.
- even though we have a strbuf, we don't maintain its
"len" field when chomping extra slashes from the
end, and instead keep a separate "pfxlen" variable. We
can fix this and then drop "pfxlen" entirely.
- we don't check whether the path is usable until after we
allocate the new struct, making extra cleanup work for
ourselves. Since we have a NUL-terminated string, we can
bump the "is it usable" checks higher in the function.
While we're at it, we can move that logic to its own
helper, which makes the flow of link_alt_odb_entry()
easier to follow.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When we add a new alternate to the list, we try to normalize
out any redundant "..", etc. However, we do not look at the
return value of normalize_path_copy(), and will happily
continue with a path that could not be normalized. Worse,
the normalizing process is done in-place, so we are left
with whatever half-finished working state the normalizing
function was in.
Fortunately, this cannot cause us to read past the end of
our buffer, as that working state will always leave the
NUL from the original path in place. And we do tend to
notice problems when we check is_directory() on the path.
But you can see the nonsense that we feed to is_directory
with an entry like:
this/../../is/../../way/../../too/../../deep/../../to/../../resolve
in your objects/info/alternates, which yields:
error: object directory
/to/e/deep/too/way//ects/this/../../is/../../way/../../too/../../deep/../../to/../../resolve
does not exist; check .git/objects/info/alternates.
We can easily fix this just by checking the return value.
But that makes it hard to generate a good error message,
since we're normalizing in-place and our input value has
been overwritten by cruft.
Instead, let's provide a strbuf helper that does an in-place
normalize, but restores the original contents on error. This
uses a second buffer under the hood, which is slightly less
efficient, but this is not a performance-critical code path.
The strbuf helper can also properly set the "len" parameter
of the strbuf before returning. Just doing:
normalize_path_copy(buf.buf, buf.buf);
will shorten the string, but leave buf.len at the original
length. That may be confusing to later code which uses the
strbuf.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Codepaths that read from an on-disk loose object were too loose in
validating what they are reading is a proper object file and
sometimes read past the data they read from the disk, which has
been corrected. H/t to Gustavo Grieco for reporting.
* jc/verify-loose-object-header:
unpack_sha1_header(): detect malformed object header
streaming: make sure to notice corrupt object
|
|
When opening a loose object file, we often do this sequence:
- prepare a short buffer for the object header (on stack)
- call unpack_sha1_header() and have early part of the object data
inflated, enough to fill the buffer
- parse that data in the short buffer, assuming that the first part
of the object is <typename> SP <length> NUL
Because the parsing function parse_sha1_header_extended() is not
given the number of bytes inflated into the header buffer, it you
craft a file whose early part inflates a garbage sequence without SP
or NUL, and replace a loose object with it, it will end up reading
past the end of the inflated data.
To correct this, do the following four things:
- rename unpack_sha1_header() to unpack_sha1_short_header() and
have unpack_sha1_header_to_strbuf() keep calling that as its
helper function. This will detect and report zlib errors, but is
not aware of the format of a loose object (as before).
- introduce unpack_sha1_header() that calls the same helper
function, and when zlib reports it inflated OK into the buffer,
check if the inflated data has NUL. This would ensure that
parsing function will terminate within the buffer that holds the
inflated header.
- update unpack_sha1_header_to_strbuf() to check if the resulting
buffer has NUL for the same effect.
- update parse_sha1_header_extended() to make sure that its loop to
find the SP that terminates the <typename> stops at NUL.
Essentially, this makes unpack_*() functions that are asked to
unpack a loose object header to be a bit more strict and detect an
input that cannot possibly be a valid object header, even before the
parsing function kicks in.
Reported-by: Gustavo Grieco <gustavo.grieco@imag.fr>
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Code cleanup.
* rs/pack-sort-with-llist-mergesort:
sha1_file: use llist_mergesort() for sorting packs
|
|
Recently we updated the code to manage the in-core cache that holds
objects that have recently been used to reconstitute other objects
that are stored as deltas against them, but the update used an
incorrect API function to manage the list of these objects. This
has been fixed.
* jk/delta-base-cache:
add_delta_base_cache: use list_for_each_safe
|
|
Sort the linked list of packs directly using llist_mergesort() instead
of building an array, calling qsort(3) and fixing up the list pointers.
This is shorter and less complicated.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The "git diff --submodule={short,log}" mechanism has been enhanced
to allow "--submodule=diff" to show the patch between the submodule
commits bound to the superproject.
* jk/diff-submodule-diff-inline:
diff: teach diff to display submodule difference with an inline diff
submodule: refactor show_submodule_summary with helper function
submodule: convert show_submodule_summary to use struct object_id *
allow do_submodule_path to work even if submodule isn't checked out
diff: prepare for additional submodule formats
graph: add support for --line-prefix on all graph-aware output
diff.c: remove output_prefix_length field
cache: add empty_tree_oid object and helper function
|
|
We may remove elements from the list while we are iterating,
which requires using a second temporary pointer. Otherwise
stepping to the next element of the list might involve
looking at freed memory (which generally works in practice,
as we _just_ freed it, but of course is wrong to rely on;
valgrind notices it).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git clone --resurse-submodules --reference $path $URL" is a way to
reduce network transfer cost by borrowing objects in an existing
$path repository when cloning the superproject from $URL; it
learned to also peek into $path for presense of corresponding
repositories of submodules and borrow objects from there when able.
* sb/submodule-clone-rr:
clone: recursive and reference option triggers submodule alternates
clone: implement optional references
clone: clarify option_reference as required
clone: factor out checking for an alternate path
submodule--helper update-clone: allow multiple references
submodule--helper module-clone: allow multiple references
t7408: merge short tests, factor out testing method
t7408: modernize style
|
|
Similar to is_null_oid(), and is_empty_blob_sha1() add an
empty_tree_oid along with helper function is_empty_tree_oid(). For
completeness, also add an "is_empty_tree_sha1()",
"is_empty_blob_sha1()", "is_empty_tree_oid()" and "is_empty_blob_oid()"
helpers.
To ensure we only get one singleton, implement EMPTY_BLOB_SHA1_BIN as
simply getting the hash of empty_blob_oid structure.
Signed-off-by: Jacob Keller <jacob.keller@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The fundamental data structure of the delta base cache is a
hash table mapping pairs of "(packfile, offset)" into
structs containing the actual object data. The hash table
implementation dates back to e5e0161 (Implement a simple
delta_base cache, 2007-03-17), and uses a fixed-size table.
The current size is a hard-coded 256 entries.
Because we need to be able to remove objects from the hash
table, entry lookup does not do any kind of probing to
handle collisions. Colliding items simply replace whatever
is in their slot. As a result, we have fewer usable slots
than even the 256 we allocate. At half full, each new item
has a 50% chance of displacing another one. Or another way
to think about it: every item has a 1/256 chance of being
ejected due to hash collision, without regard to our LRU
strategy.
So it would be interesting to see the effect of increasing
the cache size on the runtime for some common operations. As
with the previous patch, we'll measure "git log --raw" for
tree-only operations, and "git log -Sfoo --raw" for
operations that touch trees and blobs. All times are
wall-clock best-of-3, done against fully packed repos with
--depth=50, and the default core.deltaBaseCacheLimit of
96MB.
Here are timings for various values of MAX_DELTA_CACHE
against git.git (the asterisk marks the minimum time for
each operation):
MAX_DELTA_CACHE log-raw log-S
--------------- --------- ---------
256 0m02.227s 0m12.821s
512 0m02.143s 0m10.602s
1024 0m02.127s 0m08.642s
2048 0m02.148s 0m07.123s
4096 0m02.194s 0m06.448s*
8192 0m02.239s 0m06.504s
16384 0m02.144s* 0m06.502s
32768 0m02.202s 0m06.622s
65536 0m02.230s 0m06.677s
The log-raw case isn't changed much at all here (probably
because our trees just aren't that big in the first place,
or possibly because we have so _few_ trees in git.git that
the 256-entry cache is enough). But once we start putting
blobs in the cache, too, we see a big improvement (almost
50%). The curve levels off around 4096, which means that we
can hold about that many entries before hitting the 96MB
memory limit (or possibly that the workload is small enough
that there is simply no more work to be optimized out by
caching more).
(As a side note, I initially timed my existing git.git pack,
which was a base of --aggressive combined with some pulls on
top. So it had quite a few deeper delta chains. The
256-cache case was more like 15s, and it still dropped to
~6.5s in the same way).
Here are the timings for linux.git:
MAX_DELTA_CACHE log-raw log-S
--------------- --------- ---------
256 0m41.661s 5m12.410s
512 0m39.547s 5m07.920s
1024 0m37.054s 4m54.666s
2048 0m35.871s 4m41.194s*
4096 0m34.646s 4m51.648s
8192 0m33.881s 4m55.342s
16384 0m35.190s 5m00.122s
32768 0m35.060s 4m58.851s
65536 0m33.311s* 4m51.420s
As we grow we see a nice 20% speedup in the tree traversal,
and more modest 10% in the log-S. This is probably an
indication that we are bound less by the number of entries,
and more by the memory limit (more on that below). What is
interesting is that the numbers bounce around a bit;
increasing the number of entries isn't always a strict
improvement.
Partially this is due to noise in the measurement. But it
may also be an indication that our LRU ejection scheme is
not optimal. The smaller cache sizes introduce some
randomness into the ejection (due to collisions), which may
sometimes work in our favor (and sometimes not!).
So what is the optimal setting of MAX_DELTA_CACHE? The
"bouncing" in the linux.git log-S numbers notwithstanding,
it mostly seems like bigger is better. And even if we were
to try to find a "sweet spot", these are just two
repositories, that are not necessarily representative. The
shape of history, the size of trees and blobs, the memory
limit configuration, etc, all will affect the outcome.
Rather than trying to find the "right" number, another
strategy is to just switch to a hash table that can actually
store collisions: namely our hashmap.h implementation.
Here are numbers for that compared to the "best" we saw from
adjusting MAX_DELTA_CACHE:
| log-raw | log-S
| best hashmap | best hashmap
| --------- --------- | --------- ---------
git | 0m02.144s 0m02.144s | 0m06.448s 0m06.688s
linux | 0m33.311s 0m33.092s | 4m41.194s 4m57.172s
We can see the results are similar in most cases, which is
what we'd expect. We're not ejecting due to collisions at
all, so this is purely representing the LRU. So really, we'd
expect this to model most closely the larger values of the
static MAX_DELTA_CACHE limit. And that does seem to be
what's happening, including the "bounce" in the linux log-S
case.
So while the value for that case _isn't_ as good as the
optimal one measured above (which was 2048 entries), given
the bouncing I'm hesitant to suggest that 2048 is any kind
of optimum (not even for linux.git, let alone as a general
rule). The generic hashmap has the appeal that it drops the
number of tweakable numbers by one, which means we can focus
on tuning other elements, like the LRU strategy or the
core.deltaBaseCacheLimit setting.
And indeed, if we bump the cache limit to 1G (which is
probably silly for general use, but maybe something people
with big workstations would want to do), the linux.git log-S
time drops to 3m32s. That's something you really _can't_ do
easily with the static hash table, because the number of
entries needs to grow in proportion to the memory limit (so
2048 is almost certainly not going to be the right value
there).
This patch takes that direction, and drops the static hash
table entirely in favor of using the hashmap.h API.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When the delta base cache runs out of allowed memory, it has
to drop entries. It does so by walking an LRU list, dropping
objects until we are under the memory limit. But we actually
walk the list twice: once to drop blobs, and then again to
drop other objects (which are generally trees). This comes
from 18bdec1 (Limit the size of the new delta_base_cache,
2007-03-19).
This performs poorly as the number of entries grows, because
any time dropping blobs does not satisfy the limit, we have
to walk the _entire_ list, trees included, looking for blobs
to drop, before starting to drop any trees.
It's not generally a problem now, as the cache is limited to
only 256 entries. But as we could benefit from increasing
that in a future patch, it's worth looking at how it
performs as the cache size grows. And the answer is "not
well".
The table below shows times for various operations with
different values of MAX_DELTA_CACHE (which is not a run-time
knob; I recompiled with -DMAX_DELTA_CACHE=$n for each).
I chose "git log --raw" ("log-raw" in the table) because it
will access all of the trees, but no blobs at all (so in a
sense it is a worst case for this problem, because we will
always walk over the entire list of trees once before
realizing there are no blobs to drop). This is also
representative of other tree-only operations like "rev-list
--objects" and "git log -- <path>".
I also timed "git log -Sfoo --raw" ("log-S" in the table).
It similarly accesses all of the trees, but also the blobs
for each commit. It's representative of "git log -p", though
it emphasizes the cost of blob access more, as "-S" is
cheaper than computing an actual blob diff.
All timings are best-of-3 wall-clock times (though they all
were CPU bound, so the user CPU times are similar). The
repositories were fully packed with --depth=50, and the
default core.deltaBaseCacheLimit of 96M was in effect. The
current value of MAX_DELTA_CACHE is 256, so I started there
and worked up by factors of 2.
First, here are values for git.git (the asterisk signals the
fastest run for each operation):
MAX_DELTA_CACHE log-raw log-S
--------------- --------- ---------
256 0m02.212s 0m12.634s
512 0m02.136s* 0m10.614s
1024 0m02.156s 0m08.614s
2048 0m02.208s 0m07.062s
4096 0m02.190s 0m06.484s*
8192 0m02.176s 0m07.635s
16384 0m02.913s 0m19.845s
32768 0m03.617s 1m05.507s
65536 0m04.031s 1m18.488s
You can see that for the tree-only log-raw case, we don't
actually benefit that much as the cache grows (all the
differences up through 8192 are basically just noise; this
is probably because we don't actually have that many
distinct trees in git.git). But for log-S, we get a definite
speed improvement as the cache grows, but the improvements
are lost as cache size grows and the linear LRU management
starts to dominate.
Here's the same thing run against linux.git:
MAX_DELTA_CACHE log-raw log-S
--------------- --------- ----------
256 0m40.987s 5m13.216s
512 0m37.949s 5m03.243s
1024 0m35.977s 4m50.580s
2048 0m33.855s 4m39.818s
4096 0m32.913s 4m47.299s*
8192 0m32.176s* 5m14.650s
16384 0m32.185s 6m31.625s
32768 0m38.056s 9m31.136s
65536 1m30.518s 17m38.549s
The pattern is similar, though the effect in log-raw is more
pronounced here. The times dip down in the middle, and then
go back up as we keep growing.
So we know there's a problem. What's the solution?
The obvious one is to improve the data structure to avoid
walking over tree entries during the looking-for-blobs
traversal. We can do this by keeping _two_ LRU lists: one
for blobs, and one for other objects. We drop items from the
blob LRU first, and then from the tree LRU (if necessary).
Here's git.git using that strategy:
MAX_DELTA_CACHE log-raw log-S
--------------- --------- ----------
256 0m02.264s 0m12.830s
512 0m02.201s 0m10.771s
1024 0m02.181s 0m08.593s
2048 0m02.205s 0m07.116s
4096 0m02.158s 0m06.537s*
8192 0m02.213s 0m07.246s
16384 0m02.155s* 0m10.975s
32768 0m02.159s 0m16.047s
65536 0m02.181s 0m16.992s
The upswing on log-raw is gone completely. But log-S still
has it (albeit much better than without this strategy).
Let's see what linux.git shows:
MAX_DELTA_CACHE log-raw log-S
--------------- --------- ---------
256 0m42.519s 5m14.654s
512 0m39.106s 5m04.708s
1024 0m36.802s 4m51.454s
2048 0m34.685s 4m39.378s*
4096 0m33.663s 4m44.047s
8192 0m33.157s 4m50.644s
16384 0m33.090s* 4m49.648s
32768 0m33.458s 4m53.371s
65536 0m33.563s 5m04.580s
The results are similar. The tree-only case again performs
well (not surprising; we're literally just dropping the one
useless walk, and not otherwise changing the cache eviction
strategy at all). But the log-S case again does a bit worse
as the cache grows (though possibly that's within the noise,
which is much larger for this case).
Perhaps this is an indication that the "remove blobs first"
strategy is not actually optimal. The intent of it is to
avoid blowing out the tree cache when we see large blobs,
but it also means we'll throw away useful, recent blobs in
favor of older trees.
Let's run the same numbers without caring about object type
at all (i.e., one LRU list, and always evicting whatever is
at the head, regardless of type).
Here's git.git:
MAX_DELTA_CACHE log-raw log-S
--------------- --------- ---------
256 0m02.227s 0m12.821s
512 0m02.143s 0m10.602s
1024 0m02.127s 0m08.642s
2048 0m02.148s 0m07.123s
4096 0m02.194s 0m06.448s*
8192 0m02.239s 0m06.504s
16384 0m02.144s* 0m06.502s
32768 0m02.202s 0m06.622s
65536 0m02.230s 0m06.677s
Much smoother; there's no dramatic upswing as we increase
the cache size (some remains, though it's small enough that
it's mostly run-to-run noise. E.g., in the log-raw case,
note how 8192 is 50-100ms higher than its neighbors). Note
also that we stop getting any real benefit for log-S after
about 4096 entries; that number will depend on the size of
the repository, the size of the blob entries, and the memory
limit of the cache.
Let's see what linux.git shows for the same strategy:
MAX_DELTA_CACHE log-raw log-S
--------------- --------- ---------
256 0m41.661s 5m12.410s
512 0m39.547s 5m07.920s
1024 0m37.054s 4m54.666s
2048 0m35.871s 4m41.194s*
4096 0m34.646s 4m51.648s
8192 0m33.881s 4m55.342s
16384 0m35.190s 5m00.122s
32768 0m35.060s 4m58.851s
65536 0m33.311s* 4m51.420s
It's similarly good. As with the "separate blob LRU"
strategy, there's a lot of noise on the log-S run here. But
it's certainly not any worse, is possibly a bit better, and
the improvement over "separate blob LRU" on the git.git case
is dramatic.
So it seems like a clear winner, and that's what this patch
implements.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We keep an LRU list of entries for when we need to drop
something from an over-full cache. The list is implemented
as a circular doubly-linked list, which is exactly what
list.h provides. We can save a few lines by using the list.h
macros and functions. More importantly, this makes the code
easier to follow, as the reader sees explicit concepts like
"list_add_tail()" instead of pointer manipulation.
As a bonus, the list_entry() macro lets us place the lru
pointers anywhere inside the delta_base_cache_entry struct
(as opposed to just casting the pointer, which requires it
at the front of the struct). This will be useful in later
patches when we need to place other items at the front of
the struct (e.g., our hashmap implementation requires this).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This function drops an entry entirely from the cache,
meaning that aside from the freeing of the buffer, it is
exactly equivalent to detach_delta_base_cache_entry(). Let's
build on top of the detach function, which shortens the code
and will make it simpler when we change out the underlying
storage in future patches.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The delta base cache entries are stored in a fixed-length
hash table. So the way to remove an entry is to "clear" the
slot in the table, and that is what this function does.
However, the name is a leaky abstraction. If we were to
change the hash table implementation, it would no longer be
about "clearing". We should name it after _what_ it does,
not _how_ it does it. I.e., something like "remove" instead
of "clear".
But that does not tell the whole story, either. The subtle
thing about this function is that it removes the entry, but
does not free the entry data. So a more descriptive name is
"detach"; we give ownership of the data buffer to the
caller, and remove any other resources.
This patch uses the name detach_delta_base_cache_entry().
We could further model this after functions like
strbuf_detach(), which pass back all of the detached
information. However, since there are so many bits of
information in the struct (the data, the size, the type),
and so few callers (only one), it's not worth that
awkwardness. The name change and a comment can make the
intent clear.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
There is only one caller of cache_or_unpack_entry() and it
always passes 1 for the keep_cache parameter. We can
simplify it by dropping the "!keep_cache" case.
Another call, which did pass 0, was dropped in abe601b
(sha1_file: remove recursion in unpack_entry, 2013-03-27),
as unpack_entry() now does more complicated things than a
simple unpack when there is a cache miss.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In a later patch we want to determine if a path is suitable as an
alternate from other commands than builtin/clone. Move the checking
functionality of `add_one_reference` to `compute_alternate_path` that is
defined in cache.h.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* vs/typofix:
Spelling fixes
|
|
<BAD> <CORRECTED>
accidently accidentally
commited committed
dependancy dependency
emtpy empty
existance existence
explicitely explicitly
git-upload-achive git-upload-archive
hierachy hierarchy
indegee indegree
intial initial
mulitple multiple
non-existant non-existent
precendence. precedence.
priviledged privileged
programatically programmatically
psuedo-binary pseudo-binary
soemwhere somewhere
successfull successful
transfering transferring
uncommited uncommitted
unkown unknown
usefull useful
writting writing
Signed-off-by: Ville Skyttä <ville.skytta@iki.fi>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Some code may have a pack/offset pair for an object, but
would like to look up more information. Using
sha1_object_info() is too heavy-weight; it starts from the
sha1 and has to find the pack again (so not only does it waste
time, it might not even find the same instance).
In some cases, this problem is solved by helpers like
get_size_from_delta(), which is used by pack-objects to take
a shortcut for objects whose packed representation has
already been found. But there's no similar function for
getting the object type, for instance. Rather than introduce
one, let's just make the whole packed_object_info() available.
It is smart enough to spend effort only on the items the
caller wants.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
An all-zero initializer is fine for this struct, but because
the first element is a pointer, call sites need to know to
use "NULL" instead of "0". Otherwise some static checkers
like "sparse" will complain; see d099b71 (Fix some sparse
warnings, 2013-07-18) for example. So let's provide an
initializer to make this easier to get right.
But let's also comment that memset() to zero is explicitly
OK[1]. One of the callers embeds object_info in another
struct which is initialized via memset (expand_data in
builtin/cat-file.c). Since our subset of C doesn't allow
assignment from a compound literal, handling this in any
other way is awkward, so we'd like to keep the ability to
initialize by memset(). By documenting this property, it
should make anybody who wants to change the initializer
think twice before doing so.
There's one other caller of interest. In parse_sha1_header(),
we did not initialize the struct fully in the first place.
This turned out not to be a bug because the sub-function it
calls does not look at any other fields except the ones we
did initialize. But that assumption might not hold in the
future, so it's a dangerous construct. This patch switches
it to initializing the whole struct, which protects us
against unexpected reads of the other fields.
[1] Obviously using memset() to initialize a pointer
violates the C standard, but we long ago decided that it
was an acceptable tradeoff in the real world.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git am -3" calls "git merge-recursive" when it needs to fall back
to a three-way merge; this call has been turned into an internal
subroutine call instead of spawning a separate subprocess.
* js/am-3-merge-recursive-direct:
merge-recursive: flush output buffer even when erroring out
merge_trees(): ensure that the callers release output buffer
merge-recursive: offer an option to retain the output in 'obuf'
merge-recursive: write the commit title in one go
merge-recursive: flush output buffer before printing error messages
am -3: use merge_recursive() directly again
merge-recursive: switch to returning errors instead of dying
merge-recursive: handle return values indicating errors
merge-recursive: allow write_tree_from_memory() to error out
merge-recursive: avoid returning a wholesale struct
merge_recursive: abort properly upon errors
prepare the builtins for a libified merge_recursive()
merge-recursive: clarify code in was_tracked()
die(_("BUG")): avoid translating bug messages
die("bug"): report bugs consistently
t5520: verify that `pull --rebase` shows the helpful advice when failing
|
|
"git pack-objects" has a few options that tell it not to pack
objects found in certain packfiles, which require it to scan .idx
files of all available packs. The codepaths involved in these
operations have been optimized for a common case of not having any
non-local pack and/or any .kept pack.
* jk/pack-objects-optim:
pack-objects: compute local/ignore_pack_keep early
pack-objects: break out of want_object loop early
find_pack_entry: replace last_found_pack with MRU cache
add generic most-recently-used list
sha1_file: drop free_pack_by_name
t/perf: add tests for many-pack scenarios
|
|
Each pack has an index for looking up entries in O(log n)
time, but if we have multiple packs, we have to scan through
them linearly. This can produce a measurable overhead for
some operations.
We dealt with this long ago in f7c22cc (always start looking
up objects in the last used pack first, 2007-05-30), which
keeps what is essentially a 1-element most-recently-used
cache. In theory, we should be able to do better by keeping
a similar but longer cache, that is the same length as the
pack-list itself.
Since we now have a convenient generic MRU structure, we can
plug it in and measure. Here are the numbers for running
p5303 against linux.git:
Test HEAD^ HEAD
------------------------------------------------------------------------
5303.3: rev-list (1) 31.56(31.28+0.27) 31.30(31.08+0.20) -0.8%
5303.4: repack (1) 40.62(39.35+2.36) 40.60(39.27+2.44) -0.0%
5303.6: rev-list (50) 31.31(31.06+0.23) 31.23(31.00+0.22) -0.3%
5303.7: repack (50) 58.65(69.12+1.94) 58.27(68.64+2.05) -0.6%
5303.9: rev-list (1000) 38.74(38.40+0.33) 31.87(31.62+0.24) -17.7%
5303.10: repack (1000) 367.20(441.80+4.62) 342.00(414.04+3.72) -6.9%
The main numbers of interest here are the rev-list ones
(since that is exercising the normal object lookup code
path). The single-pack case shouldn't improve at all; the
260ms speedup there is just part of the run-to-run noise
(but it's important to note that we didn't make anything
worse with the overhead of maintaining our cache). In the
50-pack case, we see similar results. There may be a slight
improvement, but it's mostly within the noise.
The 1000-pack case does show a big improvement, though. That
carries over to the repack case, as well. Even though we
haven't touched its pack-search loop yet, it does still do a
lot of normal object lookups (e.g., for the internal
revision walk), and so improves.
As a point of reference, I also ran the 1000-pack test
against a version of HEAD^ with the last_found_pack
optimization disabled. It takes ~60s, so that gives an
indication of how much even the single-element cache is
helping.
For comparison, here's a smaller repository, git.git:
Test HEAD^ HEAD
---------------------------------------------------------------------
5303.3: rev-list (1) 1.56(1.54+0.01) 1.54(1.51+0.02) -1.3%
5303.4: repack (1) 1.84(1.80+0.10) 1.82(1.80+0.09) -1.1%
5303.6: rev-list (50) 1.58(1.55+0.02) 1.59(1.57+0.01) +0.6%
5303.7: repack (50) 2.50(3.18+0.04) 2.50(3.14+0.04) +0.0%
5303.9: rev-list (1000) 2.76(2.71+0.04) 2.24(2.21+0.02) -18.8%
5303.10: repack (1000) 13.21(19.56+0.25) 11.66(18.01+0.21) -11.7%
You can see that the percentage improvement is similar.
That's because the lookup we are optimizing is roughly
O(nr_objects * nr_packs). Since the number of packs is
constant in both tests, we'd expect the improvement to be
linear in the number of objects. But the whole process is
also linear in the number of objects, so the improvement
is a constant factor.
The exact improvement does also depend on the contents of
the packs. In p5303, the extra packs all have 5 first-parent
commits in them, which is a reasonable simulation of a
pushed-to repository. But it also means that only 250
first-parent commits are in those packs (compared to almost
50,000 total in linux.git), and the rest are in the huge
"base" pack. So once we start looking at history in taht big
pack, that's where we'll find most everything, and even the
1-element cache gets close to 100% cache hits. You could
almost certainly show better numbers with a more
pathological case (e.g., distributing the objects more
evenly across the packs). But that's simply not that
realistic a scenario, so it makes more sense to focus on
these numbers.
The implementation itself is a straightforward application
of the MRU code. We provide an MRU-ordered list of packs
that shadows the packed_git list. This is easy to do because
we only create and revise the pack list in one place. The
"reprepare" code path actually drops the whole MRU and
replaces it for simplicity. It would be more efficient to
just add new entries, but there's not much point in
optimizing here; repreparing happens rarely, and only after
doing a lot of other expensive work. The key things to keep
optimized are traversal (which is just a normal linked list,
albeit with one extra level of indirection over the regular
packed_git list), and marking (which is a constant number of
pointer assignments, though slightly more than the old
last_found_pack was; it doesn't seem to create a measurable
slowdown, though).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The point of this function is to drop an entry from the
"packed_git" cache that points to a file we might be
overwriting, because our contents may not be the same (and
hence the only caller was pack-objects as it moved a
temporary packfile into place).
In older versions of git, this could happen because the
names of packfiles were derived from the set of objects they
contained, not the actual bits on disk. But since 1190a1a
(pack-objects: name pack files after trailer hash,
2013-12-05), the name reflects the actual bits on disk, and
any two packfiles with the same name can be used
interchangeably.
Dropping this function not only saves a few lines of code,
it makes the lifetime of "struct packed_git" much easier to
reason about: namely, we now do not ever free these structs.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git pack-objects" and "git index-pack" mostly operate with off_t
when talking about the offset of objects in a packfile, but there
were a handful of places that used "unsigned long" to hold that
value, leading to an unintended truncation.
* nd/pack-ofs-4gb-limit:
fsck: use streaming interface for large blobs in pack
pack-objects: do not truncate result in-pack object size on 32-bit systems
index-pack: correct "offset" type in unpack_entry_data()
index-pack: report correct bad object offsets even if they are large
index-pack: correct "len" type in unpack_data()
sha1_file.c: use type off_t* for object_info->disk_sizep
pack-objects: pass length to check_pack_crc() without truncation
|
|
The vast majority of error messages in Git's source code which report a
bug use the convention to prefix the message with "BUG:".
As part of cleaning up merge-recursive to stop die()ing except in case of
detected bugs, let's just make the remainder of the bug reports consistent
with the de facto rule.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
On 32 bit systems with large file support, unsigned long is 32-bit
while the two offsets in the subtraction expression (pack-objects has
the exact same expression as in sha1_file.c but not shown in diff) are
in 64-bit. If an in-pack object is larger than 2^32 len/datalen is
truncated and we get a misleading "error: bad packed object CRC for
..." as a result.
Use off_t for len and datalen. check_pack_crc() already accepts this
argument as off_t and can deal with 4+ GB.
Noticed-by: Christoph Michelbach <michelbach94@gmail.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The experimental "multiple worktree" feature gains more safety to
forbid operations on a branch that is checked out or being actively
worked on elsewhere, by noticing that e.g. it is being rebased.
* nd/worktree-various-heads:
branch: do not rename a branch under bisect or rebase
worktree.c: check whether branch is bisected in another worktree
wt-status.c: split bisect detection out of wt_status_get_state()
worktree.c: check whether branch is rebased in another worktree
worktree.c: avoid referencing to worktrees[i] multiple times
wt-status.c: make wt_status_check_rebase() work on any worktree
wt-status.c: split rebase detection out of wt_status_get_state()
path.c: refactor and add worktree_git_path()
worktree.c: mark current worktree
worktree.c: make find_shared_symref() return struct worktree *
worktree.c: store "id" instead of "git_dir"
path.c: add git_common_path() and strbuf_git_common_path()
dir.c: rename str(n)cmp_icase to fspath(n)cmp
|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
These functions compare two paths that are taken from file system.
Depending on the running file system, paths may need to be compared
case-sensitively or not, and maybe even something else in future. The
current names do not convey that well.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The code to read the pack data using the offsets stored in the pack
idx file has been made more carefully check the validity of the
data in the idx.
* jk/pack-idx-corruption-safety:
sha1_file.c: mark strings for translation
use_pack: handle signed off_t overflow
nth_packed_object_offset: bounds-check extended offset
t5313: test bounds-checks of corrupted/malicious pack/idx files
|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Update various codepaths to avoid manually-counted malloc().
* jk/tighten-alloc: (22 commits)
ewah: convert to REALLOC_ARRAY, etc
convert ewah/bitmap code to use xmalloc
diff_populate_gitlink: use a strbuf
transport_anonymize_url: use xstrfmt
git-compat-util: drop mempcpy compat code
sequencer: simplify memory allocation of get_message
test-path-utils: fix normalize_path_copy output buffer size
fetch-pack: simplify add_sought_entry
fast-import: simplify allocation in start_packfile
write_untracked_extension: use FLEX_ALLOC helper
prepare_{git,shell}_cmd: use argv_array
use st_add and st_mult for allocation size computation
convert trivial cases to FLEX_ARRAY macros
use xmallocz to avoid size arithmetic
convert trivial cases to ALLOC_ARRAY
convert manual allocations to argv_array
argv-array: add detach function
add helpers for allocating flex-array structs
harden REALLOC_ARRAY and xcalloc against size_t overflow
tree-diff: catch integer overflow in combine_diff_path allocation
...
|
Junio C Hamano
Lars Schneider
Jeff King
René Scharfe
Jacob Keller
Stefan Beller
Ville Skyttä
Johannes Schindelin
Nguyễn Thái Ngọc Duy