| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Code cleanup and futureproof.
* ds/object-info-for-prefetch-fix:
sha1-file: split OBJECT_INFO_FOR_PREFETCH
|
|
The OBJECT_INFO_FOR_PREFETCH bitflag was added to sha1-file.c in 0f4a4fb1
(sha1-file: support OBJECT_INFO_FOR_PREFETCH, 2019-03-29) and is used to
prevent the fetch_objects() method when enabled.
However, there is a problem with the current use. The definition of
OBJECT_INFO_FOR_PREFETCH is given by adding 32 to OBJECT_INFO_QUICK. This is
clearly stated above the definition (in a comment) that this is so
OBJECT_INFO_FOR_PREFETCH implies OBJECT_INFO_QUICK. The problem is that using
"flag & OBJECT_INFO_FOR_PREFETCH" means that OBJECT_INFO_QUICK also implies
OBJECT_INFO_FOR_PREFETCH.
Split out the single bit from OBJECT_INFO_FOR_PREFETCH into a new
OBJECT_INFO_SKIP_FETCH_OBJECT as the single bit and keep
OBJECT_INFO_FOR_PREFETCH as the union of two flags. This allows a clearer use
of flag checking while also keeping the implication of OBJECT_INFO_QUICK.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
While running "git diff" in a lazy clone, we can upfront know which
missing blobs we will need, instead of waiting for the on-demand
machinery to discover them one by one. Aim to achieve better
performance by batching the request for these promised blobs.
* jt/batch-fetch-blobs-in-diff:
diff: batch fetching of missing blobs
sha1-file: support OBJECT_INFO_FOR_PREFETCH
|
|
Teach oid_object_info_extended() to support a new flag that inhibits
fetching of missing objects. This is equivalent to setting
fetch_is_missing to 0, calling oid_object_info_extended(), then setting
fetch_if_missing to whatever it was before. Update unpack-trees.c to use
this new flag instead of repeatedly setting fetch_if_missing.
This new flag complicates things slightly in that there are now 2 ways
to do the same thing. But this eliminates the need to repeatedly set a
global variable, and more importantly, allows prefetching to be done in
parallel (in the future); hence, this patch.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
There are some cases, such as the dumb HTTP transport and bundles, where
we can only determine the hash algorithm in use by the length of the
object IDs. Provide a function that looks up the algorithm by length.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Code clean-up.
* jk/loose-object-cache-oid:
prefer "hash mismatch" to "sha1 mismatch"
sha1-file: avoid "sha1 file" for generic use in messages
sha1-file: prefer "loose object file" to "sha1 file" in messages
sha1-file: drop has_sha1_file()
convert has_sha1_file() callers to has_object_file()
sha1-file: convert pass-through functions to object_id
sha1-file: modernize loose header/stream functions
sha1-file: modernize loose object file functions
http: use struct object_id instead of bare sha1
update comment references to sha1_object_info()
sha1-file: fix outdated sha1 comment references
|
|
The in-core repository instances are passed through more codepaths.
* sb/more-repo-in-api: (23 commits)
t/helper/test-repository: celebrate independence from the_repository
path.h: make REPO_GIT_PATH_FUNC repository agnostic
commit: prepare free_commit_buffer and release_commit_memory for any repo
commit-graph: convert remaining functions to handle any repo
submodule: don't add submodule as odb for push
submodule: use submodule repos for object lookup
pretty: prepare format_commit_message to handle arbitrary repositories
commit: prepare logmsg_reencode to handle arbitrary repositories
commit: prepare repo_unuse_commit_buffer to handle any repo
commit: prepare get_commit_buffer to handle any repo
commit-reach: prepare in_merge_bases[_many] to handle any repo
commit-reach: prepare get_merge_bases to handle any repo
commit-reach.c: allow get_merge_bases_many_0 to handle any repo
commit-reach.c: allow remove_redundant to handle any repo
commit-reach.c: allow merge_bases_many to handle any repo
commit-reach.c: allow paint_down_to_common to handle any repo
commit: allow parse_commit* to handle any repo
object: parse_object to honor its repository argument
object-store: prepare has_{sha1, object}_file to handle any repo
object-store: prepare read_object_file to deal with any repo
...
|
|
Add sha-256 hash and plug it through the code to allow building Git
with the "NewHash".
* bc/sha-256:
hash: add an SHA-256 implementation using OpenSSL
sha256: add an SHA-256 implementation using libgcrypt
Add a base implementation of SHA-256 support
commit-graph: convert to using the_hash_algo
t/helper: add a test helper to compute hash speed
sha1-file: add a constant for hash block size
t: make the sha1 test-tool helper generic
t: add basic tests for our SHA-1 implementation
cache: make hashcmp and hasheq work with larger hashes
hex: introduce functions to print arbitrary hashes
sha1-file: provide functions to look up hash algorithms
sha1-file: rename algorithm to "sha1"
|
|
Code clean-up.
* rs/sha1-file-close-mapped-file-on-error:
sha1-file: close fd of empty file in map_sha1_file_1()
|
|
To future-proof ourselves against a change in the hash, let's use the
more generic "hash mismatch" to refer to integrity problems. Note that
we do advertise this exact string in git-fsck(1). However, the message
itself is marked for translation, meaning we do not expect it to be
machine-readable.
While we're touching that documentation, let's also update it for
grammar and clarity.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
These error messages say "sha1 file", which is vague and not common in
user-facing documentation. Unlike the conversions from the previous
commit, these do not always refer to loose objects.
In finalize_object_file() we could be dealing with a packfile. Let's
just say "unable to write file" instead; since we include the filename,
the nature of the file is clear from the rest of the message.
In force_object_loose(), we're calling into read_object(), which could
actually be _any_ type of object. Just say "object".
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When we're reporting an error for a loose object, let's use that term.
It's more consistent with other parts of Git, and it is future-proof
against changes to the hash function.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
There are no callers left of has_sha1_file() or its with_flags()
variant. Let's drop them, and convert has_object_file() from a wrapper
into the "real" function. Ironically, the sha1 variant was just copying
into an object_id internally, so the resulting code is actually shorter!
We can also drop the coccinelle rules for catching has_sha1_file()
callers. Since the function no longer exists, the compiler will do that
for us.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The only remaining callers of has_sha1_file() actually have an object_id
already. They can use the "object" variant, rather than dereferencing
the hash themselves.
The code changes here were completely generated by the included
coccinelle patch.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
These two static functions, read_object() and quick_has_loose(), both
have to hashcpy() their bare-sha1 arguments into object_id structs to
pass them along. Since all of their callers actually have object_id
structs in the first place, we can eliminate the copying by adjusting
their input parameters.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Inline odb_load_loose_cache() into its only remaining caller,
odb_loose_cache(). The latter offers a nicer interface for loading the
cache, as it doesn't require callers to deal with fanout directory
numbers directly.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
As with the open/map/close functions for loose objects that were
recently converted, the functions for parsing the loose object stream
use the name "sha1" and a bare "unsigned char *". Let's fix that so that
unpack_sha1_header() becomes unpack_loose_header(), etc.
These conversions are less clear-cut than the file access functions.
You could argue that the they are parsing Git's canonical object format
(i.e., "type size\0contents", over which we compute the hash), which is
not strictly tied to loose storage. But in practice these functions are
used only for loose objects, and using the term "loose_header" (instead
of "object_header") distinguishes it from the object header found in
packfiles (which contains the same information in a different format).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The loose objects cache is filled one subdirectory at a time as needed.
It is stored in an oid_array, which has to be resorted after each add
operation. So when querying a wide range of objects, the partially
filled array needs to be resorted up to 255 times, which takes over 100
times longer than sorting once.
Use one oid_array for each subdirectory. This ensures that entries have
to only be sorted a single time. It also avoids eight binary search
steps for each cache lookup as a small bonus.
The cache is used for collision checks for the log placeholders %h, %t
and %p, and we can see the change speeding them up in a repository with
ca. 100 objects per subdirectory:
$ git count-objects
26733 objects, 68808 kilobytes
Test HEAD^ HEAD
--------------------------------------------------------------------
4205.1: log with %H 0.51(0.47+0.04) 0.51(0.49+0.02) +0.0%
4205.2: log with %h 0.84(0.82+0.02) 0.60(0.57+0.03) -28.6%
4205.3: log with %T 0.53(0.49+0.04) 0.52(0.48+0.03) -1.9%
4205.4: log with %t 0.84(0.80+0.04) 0.60(0.59+0.01) -28.6%
4205.5: log with %P 0.52(0.48+0.03) 0.51(0.50+0.01) -1.9%
4205.6: log with %p 0.85(0.78+0.06) 0.61(0.56+0.05) -28.2%
4205.7: log with %h-%h-%h 0.96(0.92+0.03) 0.69(0.64+0.04) -28.1%
Reported-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The loose object access code in sha1-file.c is some of the oldest in
Git, and could use some modernizing. It mostly uses "unsigned char *"
for object ids, which these days should be "struct object_id".
It also uses the term "sha1_file" in many functions, which is confusing.
The term "loose_objects" is much better. It clearly distinguishes
them from packed objects (which didn't even exist back when the name
"sha1_file" came into being). And it also distinguishes it from the
checksummed-file concept in csum-file.c (which until recently was
actually called "struct sha1file"!).
This patch converts the functions {open,close,map,stat}_sha1_file() into
open_loose_object(), etc, and switches their sha1 arguments for
object_id structs. Similarly, path functions like fill_sha1_path()
become fill_loose_path() and use object_ids.
The function sha1_loose_object_info() already says "loose", so we can
just drop the "sha1" (and teach it to use object_id).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add and use a function for emptying the loose object cache, so callers
don't have to know any of its implementation details.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add and use a function for loading the entries of a loose object
subdirectory for a given object ID. It frees callers from deriving the
fanout key; they can use the returned oid_array reference for lookups or
forward range scans.
Suggested-by: Jeff King <peff@peff.net>
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Commit 17e65451e3 (sha1_file: convert check_sha1_signature to struct
object_id, 2018-03-12) switched to using the name "oid", but forgot to
update the variable name in the comment.
Likewise, b4f5aca40e (sha1_file: convert read_sha1_file to struct
object_id, 2018-03-12) dropped the name read_sha1_file(), but missed a
comment which mentions it.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
map_sha1_file_1() checks if the file it is about to mmap() is empty and
errors out in that case and explains the situation in an error message.
It leaks the private handle to that empty file, though.
Have the function clean up after itself and close the file descriptor
before exiting early.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Code clean-up with optimization for the codepath that checks
(non-)existence of loose objects.
* jk/loose-object-cache:
odb_load_loose_cache: fix strbuf leak
fetch-pack: drop custom loose object cache
sha1-file: use loose object cache for quick existence check
object-store: provide helpers for loose_objects_cache
sha1-file: use an object_directory for the main object dir
handle alternates paths the same as the main object dir
sha1_file_name(): overwrite buffer instead of appending
rename "alternate_object_database" to "object_directory"
submodule--helper: prefer strip_suffix() to ends_with()
fsck: do not reuse child_process structs
|
|
Commit 3a2e0824 ("object-store: provide helpers for loose_objects_cache",
2018-11-12) moved the cache-loading code from find_short_object_filename(),
but forgot the line that releases the path strbuf.
Reported-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Code preparation to replace ulong vars with size_t vars where
appropriate.
* tb/print-size-t-with-uintmax-format:
Upcast size_t variables to uintmax_t when printing
|
|
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
read_object_file_extended is not widely used, so migrate it all at once.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
SHA-1 is weak and we need to transition to a new hash function. For
some time, we have referred to this new function as NewHash. Recently,
we decided to pick SHA-256 as NewHash. The reasons behind the choice of
SHA-256 are outlined in the thread starting at [1] and in the commit
history for the hash function transition document.
Add a basic implementation of SHA-256 based off libtomcrypt, which is in
the public domain. Optimize it and restructure it to meet our coding
standards. Pull in the update and final functions from the SHA-1 block
implementation, as we know these function correctly with all compilers.
This implementation is slower than SHA-1, but more performant
implementations will be introduced in future commits.
Wire up SHA-256 in the list of hash algorithms, and add a test that the
algorithm works correctly.
Note that with this patch, it is still not possible to switch to using
SHA-256 in Git. Additional patches are needed to prepare the code to
handle a larger hash algorithm and further test fixes are needed.
[1] https://public-inbox.org/git/20180609224913.GC38834@genre.crustytoothpaste.net/
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
There is one place we need the hash algorithm block size: the HMAC code
for push certs. Expose this constant in struct git_hash_algo and expose
values for SHA-1 and for the largest value of any hash.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A regression in Git 2.12 era made "git fsck" fall into an infinite
loop while processing truncated loose objects.
* jk/detect-truncated-zlib-input:
cat-file: handle streaming failures consistently
check_stream_sha1(): handle input underflow
t1450: check large blob in trailing-garbage test
|
|
In cases where we expect to ask has_sha1_file() about a lot of objects
that we are not likely to have (e.g., during fetch negotiation), we
already use OBJECT_INFO_QUICK to sacrifice accuracy (due to racing with
a simultaneous write or repack) for speed (we avoid re-scanning the pack
directory).
However, even checking for loose objects can be expensive, as we will
stat() each one. On many systems this cost isn't too noticeable, but
stat() can be particularly slow on some operating systems, or due to
network filesystems.
Since the QUICK flag already tells us that we're OK with a slightly
stale answer, we can use that as a cue to look in our in-memory cache of
each object directory. That basically trades an in-memory binary search
for a stat() call.
Note that it is possible for this to actually be _slower_. We'll do a
full readdir() to fill the cache, so if you have a very large number of
loose objects and a very small number of lookups, that readdir() may end
up more expensive.
This shouldn't be a big deal in practice. If you have a large number of
reachable loose objects, you'll already run into performance problems
(which you should remedy by repacking). You may have unreachable objects
which wouldn't otherwise impact performance. Usually these would go away
with the prune step of "git gc", but they may be held for up to 2 weeks
in the default configuration.
So it comes down to how many such objects you might reasonably expect to
have, how much slower is readdir() on N entries versus M stat() calls
(and here we really care about the syscall backing readdir(), like
getdents() on Linux, but I'll just call this readdir() below).
If N is much smaller than M (a typical packed repo), we know this is a
big win (few readdirs() followed by many uses of the resulting cache).
When N and M are similar in size, it's also a win. We care about the
latency of making a syscall, and readdir() should be giving us many
values in a single call. How many?
On Linux, running "strace -e getdents ls" shows a 32k buffer getting 512
entries per call (which is 64 bytes per entry; the name itself is 38
bytes, plus there are some other fields). So we can imagine that this is
always a win as long as the number of loose objects in the repository is
a factor of 500 less than the number of lookups you make. It's hard to
auto-tune this because we don't generally know up front how many lookups
we're going to do. But it's unlikely for this to perform significantly
worse.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Our object_directory struct has a loose objects cache that all users of
the struct can see. But the only one that knows how to load the cache is
find_short_object_filename(). Let's extract that logic in to a reusable
function.
While we're at it, let's also reset the cache when we re-read the object
directories. This shouldn't have an impact on performance, as re-reads
are meant to be rare (and are already expensive, so we avoid them with
things like OBJECT_INFO_QUICK).
Since the cache is already meant to be an approximation, it's tempting
to skip even this bit of safety. But it's necessary to allow more code
to use it. For instance, fetch-pack explicitly re-reads the object
directory after performing its fetch, and would be confused if we didn't
clear the cache.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Our handling of alternate object directories is needlessly different
from the main object directory. As a result, many places in the code
basically look like this:
do_something(r->objects->objdir);
for (odb = r->objects->alt_odb_list; odb; odb = odb->next)
do_something(odb->path);
That gets annoying when do_something() is non-trivial, and we've
resorted to gross hacks like creating fake alternates (see
find_short_object_filename()).
Instead, let's give each raw_object_store a unified list of
object_directory structs. The first will be the main store, and
everything after is an alternate. Very few callers even care about the
distinction, and can just loop over the whole list (and those who care
can just treat the first element differently).
A few observations:
- we don't need r->objects->objectdir anymore, and can just
mechanically convert that to r->objects->odb->path
- object_directory's path field needs to become a real pointer rather
than a FLEX_ARRAY, in order to fill it with expand_base_dir()
- we'll call prepare_alt_odb() earlier in many functions (i.e.,
outside of the loop). This may result in us calling it even when our
function would be satisfied looking only at the main odb.
But this doesn't matter in practice. It's not a very expensive
operation in the first place, and in the majority of cases it will
be a noop. We call it already (and cache its results) in
prepare_packed_git(), and we'll generally check packs before loose
objects. So essentially every program is going to call it
immediately once per program.
Arguably we should just prepare_alt_odb() immediately upon setting
up the repository's object directory, which would save us sprinkling
calls throughout the code base (and forgetting to do so has been a
source of subtle bugs in the past). But I've stopped short of that
here, since there are already a lot of other moving parts in this
patch.
- Most call sites just get shorter. The check_and_freshen() functions
are an exception, because they have entry points to handle local and
nonlocal directories separately.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When we generate loose file paths for the main object directory, the
caller provides a buffer to loose_object_path (formerly sha1_file_name).
The callers generally keep their own static buffer to avoid excessive
reallocations.
But for alternate directories, each struct carries its own scratch
buffer. This is needlessly different; let's unify them.
We could go either direction here, but this patch moves the alternates
struct over to the main directory style (rather than vice-versa).
Technically the alternates style is more efficient, as it avoids
rewriting the object directory name on each call. But this is unlikely
to matter in practice, as we avoid reallocations either way (and nobody
has ever noticed or complained that the main object directory is copying
a few extra bytes before making a much more expensive system call).
And this has the advantage that the reusable buffers are tied to
particular calls, which makes the invalidation rules simpler (for
example, the return value from stat_sha1_file() used to be invalidated
by basically any other object call, but now it is affected only by other
calls to stat_sha1_file()).
We do steal the trick from alt_sha1_path() of returning a pointer to the
filled buffer, which makes a few conversions more convenient.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The sha1_file_name() function is used to generate the path to a loose
object in the object directory. It doesn't make much sense for it to
append, since the the path we write may be absolute (i.e., you cannot
reliably build up a path with it). Because many callers use it with a
static buffer, they have to strbuf_reset() manually before each call
(and the other callers always use an empty buffer, so they don't care
either way). Let's handle this automatically.
Since we're changing the semantics, let's take the opportunity to give
it a more hash-neutral name (which will also catch any callers from
topics in flight).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In preparation for unifying the handling of alt odb's and the normal
repo object directory, let's use a more neutral name. This patch is
purely mechanical, swapping the type name, and converting any variables
named "alt" to "odb". There should be no functional change, but it will
reduce the noise in subsequent diffs.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When printing variables which contain a size, today "unsigned long"
is used at many places.
In order to be able to change the type from "unsigned long" into size_t
some day in the future, we need to have a way to print 64 bit variables
on a system that has "unsigned long" defined to be 32 bit, like Win64.
Upcast all those variables into uintmax_t before they are printed.
This is to prepare for a bigger change, when "unsigned long"
will be converted into size_t for variables which may be > 4Gib.
Signed-off-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* jk/detect-truncated-zlib-input
cat-file: handle streaming failures consistently
check_stream_sha1(): handle input underflow
t1450: check large blob in trailing-garbage test
|
|
There are several ways we might refer to a hash algorithm: by name, such
as in the config file; by format ID, such as in a pack; or internally,
by a pointer to the hash_algos array. Provide functions to look up hash
algorithms based on these various forms and return the internal constant
used for them. If conversion to another form is necessary, this
internal constant can be used to look up the proper data in the
hash_algos array.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The transition plan anticipates us using a syntax such as "^{sha1}" for
disambiguation. Since this is a syntax some people will be typing a
lot, it makes sense to provide a short, easy-to-type syntax. Omitting
the dash doesn't create any ambiguity; however, it does make the syntax
shorter and easier to type, especially for touch typists. In addition,
the transition plan already uses "sha1" in this context.
Rename the name of SHA-1 implementation to "sha1".
Note that this change creates no backwards compatibility concerns, since
we haven't yet used this field in any configuration settings.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
has_packed_and_bad is not widely used, so just migrate it all at once.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Allow read_object (a file local functon in sha1_file) to
handle arbitrary repositories by passing the repository down
to oid_object_info_extended.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Various codepaths in the core-ish part learn to work on an
arbitrary in-core index structure, not necessarily the default
instance "the_index".
* nd/the-index: (23 commits)
revision.c: reduce implicit dependency the_repository
revision.c: remove implicit dependency on the_index
ws.c: remove implicit dependency on the_index
tree-diff.c: remove implicit dependency on the_index
submodule.c: remove implicit dependency on the_index
line-range.c: remove implicit dependency on the_index
userdiff.c: remove implicit dependency on the_index
rerere.c: remove implicit dependency on the_index
sha1-file.c: remove implicit dependency on the_index
patch-ids.c: remove implicit dependency on the_index
merge.c: remove implicit dependency on the_index
merge-blobs.c: remove implicit dependency on the_index
ll-merge.c: remove implicit dependency on the_index
diff-lib.c: remove implicit dependency on the_index
read-cache.c: remove implicit dependency on the_index
diff.c: remove implicit dependency on the_index
grep.c: remove implicit dependency on the_index
diff.c: remove the_index dependency in textconv() functions
blame.c: rename "repo" argument to "r"
combine-diff.c: remove implicit dependency on the_index
...
|
|
The code to backfill objects in lazily cloned repository did not
work correctly, which has been corrected.
* jt/lazy-object-fetch-fix:
fetch-object: set exact_oid when fetching
fetch-object: unify fetch_object[s] functions
|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
There are fetch_object() and fetch_objects() helpers in
fetch-object.h; as the latter takes "struct oid_array",
the former cannot be made into a thin wrapper around the
latter without an extra allocation and set-up cost.
Update fetch_objects() to take an array of "struct object_id"
and number of elements in it as separate parameters, remove
fetch_object(), and adjust all existing callers of these
functions to use the new fetch_objects().
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This rounds out the previous three patches, covering the
inequality logic for the "hash" variant of the functions.
As with the previous three, the accompanying code changes
are the mechanical result of applying the coccinelle patch;
see those patches for more discussion.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This is the flip side of the previous two patches: checking
for a non-zero oidcmp() can be more strictly expressed as
inequality. Like those patches, we write "!= 0" in the
coccinelle transformation, which covers by isomorphism the
more common:
if (oidcmp(E1, E2))
As with the previous two patches, this patch can be achieved
almost entirely by running "make coccicheck"; the only
differences are manual line-wrap fixes to match the original
code.
There is one thing to note for anybody replicating this,
though: coccinelle 1.0.4 seems to miss the case in
builtin/tag.c, even though it's basically the same as all
the others. Running with 1.0.7 does catch this, so
presumably it's just a coccinelle bug that was fixed in the
interim.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Using the more restrictive oideq() should, in the long run,
give the compiler more opportunities to optimize these
callsites. For now, this conversion should be a complete
noop with respect to the generated code.
The result is also perhaps a little more readable, as it
avoids the "zero is equal" idiom. Since it's so prevalent in
C, I think seasoned programmers tend not to even notice it
anymore, but it can sometimes make for awkward double
negations (e.g., we can drop a few !!oidcmp() instances
here).
This patch was generated almost entirely by the included
coccinelle patch. This mechanical conversion should be
completely safe, because we check explicitly for cases where
oidcmp() is compared to 0, which is what oideq() is doing
under the hood. Note that we don't have to catch "!oidcmp()"
separately; coccinelle's standard isomorphisms make sure the
two are treated equivalently.
I say "almost" because I did hand-edit the coccinelle output
to fix up a few style violations (it mostly keeps the
original formatting, but sometimes unwraps long lines).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
Junio C Hamano
Derrick Stolee
Jonathan Tan
brian m. carlson
Jeff King
René Scharfe
Stefan Beller
Torsten Bögershausen
Nguyễn Thái Ngọc Duy