| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Replace "is this subdirectory a separate repository that should not
be touched?" check "git clean" does by checking if it has .git/HEAD
using the submodule-related code with a more optimized check.
* ee/clean-remove-dirs:
read_gitfile_gently: fix use-after-free
clean: improve performance when removing lots of directories
p7300: add performance tests for clean
t7300: add tests to document behavior of clean and nested git
setup: sanity check file size in read_gitfile_gently
setup: add gentle version of read_gitfile
|
|
The "dir" variable is a pointer into the "buf" array. When
we hit the cleanup_return path, the first thing we do is
free(buf); but one of the error messages prints "dir", which
will access the memory after the free.
We can fix this by reorganizing the error path a little. We
act on the fatal, error-printing conditions first, as they
want to access memory and do not care about freeing. Then we
free any memory, and finally return.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The setup code used to die when core.bare and core.worktree are set
inconsistently, even for commands that do not need working tree.
* jk/die-on-bogus-worktree-late:
setup_git_directory: delay core.bare/core.worktree errors
|
|
read_gitfile_gently will allocate a buffer to fit the entire file that
should be read. Add a sanity check of the file size before opening to
avoid allocating a potentially huge amount of memory if we come across
a large file that someone happened to name ".git". The limit is set to
a sufficiently unreasonable size that should never be exceeded by a
genuine .git file.
Signed-off-by: Erik Elfström <erik.elfstrom@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
read_gitfile will die on most error cases. This makes it unsuitable
for speculative calls. Extract the core logic and provide a gentle
version that returns NULL on failure.
The first usecase of the new gentle version will be to probe for
submodules during git clean.
Helped-by: Junio C Hamano <gitster@pobox.com>
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Erik Elfström <erik.elfstrom@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If both core.bare and core.worktree are set, we complain
about the bogus config and die. Dying is good, because it
avoids commands running and doing damage in a potentially
incorrect setup. But dying _there_ is bad, because it means
that commands which do not even care about the work tree
cannot run. This can make repairing the situation harder:
[setup]
$ git config core.bare true
$ git config core.worktree /some/path
[OK, expected.]
$ git status
fatal: core.bare and core.worktree do not make sense
[Hrm...]
$ git config --unset core.worktree
fatal: core.bare and core.worktree do not make sense
[Nope...]
$ git config --edit
fatal: core.bare and core.worktree do not make sense
[Gaaah.]
$ git help config
fatal: core.bare and core.worktree do not make sense
Instead, let's issue a warning about the bogus config when
we notice it (i.e., for all commands), but only die when the
command tries to use the work tree (by calling setup_work_tree).
So we now get:
$ git status
warning: core.bare and core.worktree do not make sense
fatal: unable to set up work tree using invalid config
$ git config --unset core.worktree
warning: core.bare and core.worktree do not make sense
We have to update t1510 to accomodate this; it uses
symbolic-ref to check whether the configuration works or
not, but of course that command does not use the working
tree. Instead, we switch it to use `git status`, as it
requires a work-tree, does not need any special setup, and
is read-only (so a failure will not adversely affect further
tests).
In addition, we add a new test that checks the desired
behavior (i.e., that running "git config" with the bogus
config does in fact work).
Reported-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A heuristic to help the "git <cmd> <revs> <pathspec>" command line
convention to catch mistyped paths is to make sure all the non-rev
parameters in the later part of the command line are names of the
files in the working tree, but that means "git grep $str -- \*.c"
must always be disambiguated with "--", because nobody sane will
create a file whose name literally is asterisk-dot-see. Loosen the
heuristic to declare that with a wildcard string the user likely
meant to give us a pathspec.
* nd/dwim-wildcards-as-pathspecs:
pathspec: avoid the need of "--" when wildcard is used
|
|
When "--" is lacking from the command line and a command can take
both revs and paths, the idea is if an argument can be seen as both
an extended SHA-1 and a path, then "--" is required or git refuses
to continue. It's currently implemented as:
(1) if an argument is rev, then it must not exist in worktree
(2) else, it must exist in worktree
(3) else, "--" is required.
These rules work for literal paths, but when non-literal pathspec is
involved, it almost always requires the user to add "--" because it
fails (2) and (1) is really rarely met (take "*.c" for example, (1)
is met if there is a ref named "*.c").
This patch modifies the rules a bit by considering any valid (*)
wildcard pathspec "exist in worktree". The rules become:
(1) if an arg is a rev, then it must either exist in worktree or
not be a valid wildcard pathspec.
(2) else, it either exists in worktree or is a wildcard pathspec
(3) else, "--" is required.
With the new rules, "--" is not needed most of the time when
wildcard pathspec is involved.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
(alias R=$GIT_COMMON_DIR/worktrees/<id>)
- linked checkouts are supposed to keep its location in $R/gitdir up
to date. The use case is auto fixup after a manual checkout move.
- linked checkouts are supposed to update mtime of $R/gitdir. If
$R/gitdir's mtime is older than a limit, and it points to nowhere,
worktrees/<id> is to be pruned.
- If $R/locked exists, worktrees/<id> is not supposed to be pruned. If
$R/locked exists and $R/gitdir's mtime is older than a really long
limit, warn about old unused repo.
- "git checkout --to" is supposed to make a hard link named $R/link
pointing to the .git file on supported file systems to help detect
the user manually deleting the checkout. If $R/link exists and its
link count is greated than 1, the repo is kept.
Helped-by: Marc Branchaud <marcnarc@xiplink.com>
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Helped-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Marc Branchaud <marcnarc@xiplink.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The repo setup procedure is updated to detect $GIT_DIR/commondir and
set $GIT_COMMON_DIR properly.
The core.worktree is ignored when $GIT_COMMON_DIR is set. This is
because the config file is shared in multi-checkout setup, but
checkout directories _are_ different. Making core.worktree effective
in all checkouts mean it's back to a single checkout.
Helped-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If the file "$GIT_DIR/commondir" exists, it contains the value of
$GIT_COMMON_DIR.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Reduce the use of fixed sized buffer passed to getcwd() calls
by introducing xgetcwd() helper.
* rs/strbuf-getcwd:
use strbuf_add_absolute_path() to add absolute paths
abspath: convert absolute_path() to strbuf
use xgetcwd() to set $GIT_DIR
use xgetcwd() to get the current directory or die
wrapper: add xgetcwd()
abspath: convert real_path_internal() to strbuf
abspath: use strbuf_getcwd() to remember original working directory
setup: convert setup_git_directory_gently_1 et al. to strbuf
unix-sockets: use strbuf_getcwd()
strbuf: add strbuf_getcwd()
|
|
Convert several calls of getcwd() and die() to use xgetcwd() instead.
This way we get rid of fixed-size buffers (which can be too small
depending on the used file system) and gain consistent error messages.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Convert setup_git_directory_gently_1() and its helper functions
setup_explicit_git_dir(), setup_discovered_git_dir() and
setup_bare_git_dir() to use a struct strbuf to hold the current working
directory. Replacing the PATH_MAX-sized buffer used before removes a
path length limition on some file systems. The functions are converted
all in one go because they all read and write the variable cwd.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Currently `git_config()` uses a callback mechanism and file rereads for
config values. Due to this approach, it is not uncommon for the config
files to be parsed several times during the run of a git program, with
different callbacks picking out different variables useful to themselves.
Add a `config_set`, that can be used to construct an in-memory cache for
config-like files that the caller specifies (i.e., files like `.gitmodules`,
`~/.gitconfig` etc.). Add two external functions `git_configset_get_value`
and `git_configset_get_value_multi` for querying from the config sets.
`git_configset_get_value` follows `last one wins` semantic (i.e. if there
are multiple matches for the queried key in the files of the configset the
value returned will be the last entry in `value_list`).
`git_configset_get_value_multi` returns a list of values sorted in order of
increasing priority (i.e. last match will be at the end of the list). Add
type specific query functions like `git_configset_get_bool` and similar.
Add a default `config_set`, `the_config_set` to cache all key-value pairs
read from usual config files (repo specific .git/config, user wide
~/.gitconfig, XDG config and the global /etc/gitconfig). `the_config_set`
is populated using `git_config()`.
Add two external functions `git_config_get_value` and
`git_config_get_value_multi` for querying in a non-callback manner from
`the_config_set`. Also, add type specific query functions that are
implemented as a thin wrapper around the `config_set` API.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Tanay Abhra <tanayabh@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A finishing touch fix to a new change already in 'master'.
* mw/symlinks:
setup: fix windows path buffer over-stepping
|
|
Fix a buffer over-stepping issue triggered by providing an absolute path
that is similar to the work tree path.
abspath_part_inside_repo() may currently increment the path pointer by
offset_1st_component() + wtlen, which is too much, since
offset_1st_component() is a subset of wtlen.
For the *nix-style prefix '/', this does (by luck) not cause any issues,
since offset_1st_component() is 1 and there will always be a '/' or '\0'
that can "absorb" this.
In the case of DOS-style prefixes though, the offset_1st_component() is
3 and this can potentially over-step the string buffer. For example if
work_tree = "c:/r"
path = "c:/rl"
Then wtlen is 4, and incrementing the path pointer by (3 + 4) would
end up 2 bytes outside a string buffer of length 6.
Similarly if
work_tree = "c:/r"
path = "c:/rl/d/a"
Then (since the loop starts by also incrementing the pointer one step),
this would mean that the function would miss checking if "c:/rl/d" could
be the work_tree, arguably this is unlikely though, since it would only
be possible with symlinks on windows.
Fix this by simply avoiding to increment by offset_1st_component() and
wtlen at the same time.
Signed-off-by: Martin Erik Werner <martinerikwerner@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Allow running "gc --auto" in the background.
* nd/daemonize-gc:
gc: config option for running --auto in background
daemon: move daemonize() to libgit.a
|
|
All subcommands that take pathspecs mishandled an in-tree symbolic
link when given it as a full path from the root (which arguably is
a sick way to use pathspecs). "git ls-files -s $(pwd)/RelNotes" in
our tree is an easy reproduction recipe.
* mw/symlinks:
setup: don't dereference in-tree symlinks for absolute paths
setup: add abspath_part_inside_repo() function
t0060: add tests for prefix_path when path begins with work tree
t0060: add test for prefix_path when path == work tree
t0060: add test for prefix_path on symlinks via absolute paths
t3004: add test for ls-files on symlinks via absolute paths
|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The prefix_path_gently() function currently applies real_path to
everything if given an absolute path, dereferencing symlinks both
outside and inside the work tree.
This causes most high-level functions to misbehave when acting on
symlinks given via absolute paths. For example
$ git add /dir/repo/symlink
attempts to add the target of the symlink rather than the symlink
itself, which is usually not what the user intends to do.
In order to manipulate symlinks in the work tree using absolute paths,
symlinks should only be dereferenced outside the work tree.
Modify the prefix_path_gently() to first normalize the path in order to
make sure path levels are separated by '/', then pass the result to
'abspath_part_inside_repo' to find the part inside the work tree
(without dereferencing any symlinks inside the work tree).
For absolute paths, prefix_path_gently() did not, nor does now do, any
actual prefixing, hence the result from abspath_part_in_repo() is
returned as-is.
Fixes t0060-82 and t3004-5.
Signed-off-by: Martin Erik Werner <martinerikwerner@gmail.com>
Reviewed-by: Duy Nguyen <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In order to extract the part of an absolute path which lies inside the
repo, it is not possible to directly use real_path, since that would
dereference symlinks both outside and inside the work tree.
Add an abspath_part_inside_repo() function which first checks if the
work tree is already the prefix, then incrementally checks each path
level by temporarily NUL-terminating at each '/' and comparing against
the work tree path. If a match is found, it overwrites the input path
with the remainder past the work tree (which will be the part inside the
work tree).
This function is currently only intended for use in
'prefix_path_gently'.
Signed-off-by: Martin Erik Werner <martinerikwerner@gmail.com>
Reviewed-by: Duy Nguyen <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Leaving only the function definitions and declarations so that any
new topic in flight can still make use of the old functions, replace
existing uses of the prefixcmp() and suffixcmp() with new API
functions.
The change can be recreated by mechanically applying this:
$ git grep -l -e prefixcmp -e suffixcmp -- \*.c |
grep -v strbuf\\.c |
xargs perl -pi -e '
s|!prefixcmp\(|starts_with\(|g;
s|prefixcmp\(|!starts_with\(|g;
s|!suffixcmp\(|ends_with\(|g;
s|suffixcmp\(|!ends_with\(|g;
'
on the result of preparatory changes in this series.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* jx/relative-path-regression-fix:
Use simpler relative_path when set_git_dir
relative_path should honor dos-drive-prefix
test: use unambigous leading path (/foo) for MSYS
|
|
Using a relative_path as git_dir first appears in v1.5.6-1-g044bbbc.
It will make git_dir shorter only if git_dir is inside work_tree,
and this will increase performance. But my last refactor effort on
relative_path function (commit v1.8.3-rc2-12-ge02ca72) changed that.
Always use relative_path as git_dir may bring troubles like
$gmane/234434.
Because new relative_path is a combination of original relative_path
from path.c and original path_relative from quote.c, so in order to
restore the origin implementation, save the original relative_path
as remove_leading_path, and call it in setup.c.
Suggested-by: Karsten Blees <karsten.blees@gmail.com>
Signed-off-by: Jiang Xin <worldhello.net@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
|
|
"git mv A B" when moving a submodule A does "the right thing",
inclusing relocating its working tree and adjusting the paths in
the .gitmodules file.
* jl/submodule-mv: (53 commits)
rm: delete .gitmodules entry of submodules removed from the work tree
mv: update the path entry in .gitmodules for moved submodules
submodule.c: add .gitmodules staging helper functions
mv: move submodules using a gitfile
mv: move submodules together with their work trees
rm: do not set a variable twice without intermediate reading.
t6131 - skip tests if on case-insensitive file system
parse_pathspec: accept :(icase)path syntax
pathspec: support :(glob) syntax
pathspec: make --literal-pathspecs disable pathspec magic
pathspec: support :(literal) syntax for noglob pathspec
kill limit_pathspec_to_literal() as it's only used by parse_pathspec()
parse_pathspec: preserve prefix length via PATHSPEC_PREFIX_ORIGIN
parse_pathspec: make sure the prefix part is wildcard-free
rename field "raw" to "_raw" in struct pathspec
tree-diff: remove the use of pathspec's raw[] in follow-rename codepath
remove match_pathspec() in favor of match_pathspec_depth()
remove init_pathspec() in favor of parse_pathspec()
remove diff_tree_{setup,release}_paths
convert common_prefix() to use struct pathspec
...
|
|
Add "interactive" mode to "git clean".
The early part to refactor relative path related helper functions
looked sensible.
* jx/clean-interactive:
test: run testcases with POSIX absolute paths on Windows
test: add t7301 for git-clean--interactive
git-clean: add documentation for interactive git-clean
git-clean: add ask each interactive action
git-clean: add select by numbers interactive action
git-clean: add filter by pattern interactive action
git-clean: use a git-add-interactive compatible UI
git-clean: add colors to interactive git-clean
git-clean: show items of del_list in columns
git-clean: add support for -i/--interactive
git-clean: refactor git-clean into two phases
write_name{_quoted_relative,}(): remove redundant parameters
quote_path_relative(): remove redundant parameter
quote.c: substitute path_relative with relative_path
path.c: refactor relative_path(), not only strip prefix
test: add test cases for relative_path
|
|
When "git" is spawned in such a way that any of the low 3 file
descriptors is closed, our first open() may yield file descriptor 2,
and writing error message to it would screw things up in a big way.
* tr/protect-low-3-fds:
git: ensure 0/1/2 are open in main()
daemon/shell: refactor redirection of 0/1/2 from /dev/null
|
|
Both daemon.c and shell.c contain logic to open FDs 0/1/2 from
/dev/null if they are not already open. Move the function in daemon.c
to setup.c and use it in shell.c, too.
While there, remove a 'not' that inverted the meaning of the comment.
The point is indeed to *avoid* messing up.
Signed-off-by: Thomas Rast <trast@inf.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Prepending prefix to pathspec is a trick to workaround the fact that
commands can be executed in a subdirectory, but all git commands run
at worktree's root. The prefix part should always be treated as
literal string. Make it so.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Original design of relative_path() is simple, just strip the prefix
(*base) from the absolute path (*abs).
In most cases, we need a real relative path, such as: ../foo,
../../bar. That's why there is another reimplementation
(path_relative()) in quote.c.
Borrow some codes from path_relative() in quote.c to refactor
relative_path() in path.c, so that it could return real relative
path, and user can reuse this function without reimplementing
his/her own. The function path_relative() in quote.c will be
substituted, and I would use the new relative_path() function when
implementing the interactive git-clean later.
Different results for relative_path() before and after this refactor:
abs path base path relative (original) relative (refactor)
======== ========= =================== ===================
/a/b /a/b . ./
/a/b/ /a/b . ./
/a /a/b/ /a ../
/ /a/b/ / ../../
/a/c /a/b/ /a/c ../c
/x/y /a/b/ /x/y ../../x/y
a/b/ a/b/ . ./
a/b/ a/b . ./
a a/b a ../
x/y a/b/ x/y ../../x/y
a/c a/b a/c ../c
(empty) (null) (empty) ./
(empty) (empty) (empty) ./
(empty) /a/b (empty) ./
(null) (null) (null) ./
(null) (empty) (null) ./
(null) /a/b (segfault) ./
You may notice that return value "." has been changed to "./".
It is because:
* Function quote_path_relative() in quote.c will show the relative
path as "./" if abs(in) and base(prefix) are the same.
* Function relative_path() is called only once (in setup.c), and
it will be OK for the return value as "./" instead of ".".
Signed-off-by: Jiang Xin <worldhello.net@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git cmd -- ':(top'" was not diagnosed as an invalid syntax, and
instead the parser kept reading beyond the end of the string.
* lf/setup-prefix-pathspec:
setup.c: check that the pathspec magic ends with ")"
setup.c: stop prefix_pathspec() from looping past the end of string
|
|
An aliased command spawned from a bare repository that does not say
it is bare with "core.bare = yes" is treated as non-bare by mistake.
* jk/alias-in-bare:
setup: suppress implicit "." work-tree for bare repos
environment: add GIT_PREFIX to local_repo_env
cache.h: drop LOCAL_REPO_ENV_SIZE
|
|
The previous code did not diagnose an incorrectly spelled ":(top"
as an error.
Signed-off-by: Andrew Wong <andrew.kw.w@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The code assumes that the string ends at either `)` or `,`, and does
not handle the case where strcspn() returns length due to end of
string. So specifying ":(top" as pathspec will cause the loop to go
past the end of string.
Signed-off-by: Andrew Wong <andrew.kw.w@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If an explicit GIT_DIR is given without a working tree, we
implicitly assume that the current working directory should
be used as the working tree. E.g.,:
GIT_DIR=/some/repo.git git status
would compare against the cwd.
Unfortunately, we fool this rule for sub-invocations of git
by setting GIT_DIR internally ourselves. For example:
git init foo
cd foo/.git
git status ;# fails, as we expect
git config alias.st status
git status ;# does not fail, but should
What happens is that we run setup_git_directory when doing
alias lookup (since we need to see the config), set GIT_DIR
as a result, and then leave GIT_WORK_TREE blank (because we
do not have one). Then when we actually run the status
command, we do setup_git_directory again, which sees our
explicit GIT_DIR and uses the cwd as an implicit worktree.
It's tempting to argue that we should be suppressing that
second invocation of setup_git_directory, as it could use
the values we already found in memory. However, the problem
still exists for sub-processes (e.g., if "git status" were
an external command).
You can see another example with the "--bare" option, which
sets GIT_DIR explicitly. For example:
git init foo
cd foo/.git
git status ;# fails
git --bare status ;# does NOT fail
We need some way of telling sub-processes "even though
GIT_DIR is set, do not use cwd as an implicit working tree".
We could do it by putting a special token into
GIT_WORK_TREE, but the obvious choice (an empty string) has
some portability problems.
Instead, we add a new boolean variable, GIT_IMPLICIT_WORK_TREE,
which suppresses the use of cwd as a working tree when
GIT_DIR is set. We trigger the new variable when we know we
are in a bare setting.
The variable is left intentionally undocumented, as this is
an internal detail (for now, anyway). If somebody comes up
with a good alternate use for it, and once we are confident
we have shaken any bugs out of it, we can consider promoting
it further.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The GIT_PREFIX variable is set based on our location within
the working tree. It should therefore be cleared whenever
GIT_WORK_TREE is cleared.
In practice, this doesn't cause any bugs, because none of
the sub-programs we invoke with local_repo_env cleared
actually care about GIT_PREFIX. But this is the right thing
to do, and future proofs us against that assumption changing.
While we're at it, let's define a GIT_PREFIX_ENVIRONMENT
macro; this avoids repetition of the string literal, which
can help catch any spelling mistakes in the code.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
An earlier workaround designed to help people who list logical
directories that will not match what getcwd(3) returns in the
GIT_CEILING_DIRECTORIES had an adverse effect when it is slow to
stat and readlink a directory component of an element listed on it.
* mh/maint-ceil-absolute:
Provide a mechanism to turn off symlink resolution in ceiling paths
|
|
Commit 1b77d83cab 'setup_git_directory_gently_1(): resolve symlinks
in ceiling paths' changed the setup code to resolve symlinks in the
entries in GIT_CEILING_DIRECTORIES. Because those entries are
compared textually to the symlink-resolved current directory, an
entry in GIT_CEILING_DIRECTORIES that contained a symlink would have
no effect. It was known that this could cause performance problems
if the symlink resolution *itself* touched slow filesystems, but it
was thought that such use cases would be unlikely. The intention of
the earlier change was to deal with a case when the user has this:
GIT_CEILING_DIRECTORIES=/home/gitster
but in reality, /home/gitster is a symbolic link to somewhere else,
e.g. /net/machine/home4/gitster. A textual comparison between the
specified value /home/gitster and the location getcwd(3) returns
would not help us, but readlink("/home/gitster") would still be
fast.
After this change was released, Anders Kaseorg <andersk@mit.edu>
reported:
> [...] my computer has been acting so slow when I’m not connected to
> the network. I put various network filesystem paths in
> $GIT_CEILING_DIRECTORIES, such as
> /afs/athena.mit.edu/user/a/n/andersk (to avoid hitting its parents
> /afs/athena.mit.edu, /afs/athena.mit.edu/user/a, and
> /afs/athena.mit.edu/user/a/n which all live in different AFS
> volumes). Now when I’m not connected to the network, every
> invocation of Git, including the __git_ps1 in my shell prompt, waits
> for AFS to timeout.
To allow users to work around this problem, give them a mechanism to
turn off symlink resolution in GIT_CEILING_DIRECTORIES entries. All
the entries that follow an empty entry will not be checked for symbolic
links and used literally in comparison. E.g. with these:
GIT_CEILING_DIRECTORIES=:/foo/bar:/xyzzy or
GIT_CEILING_DIRECTORIES=/foo/bar::/xyzzy
we will not readlink("/xyzzy") because it comes after an empty entry.
With the former (but not with the latter), "/foo/bar" comes after an
empty entry, and we will not readlink it, either.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When giving arguments without "--" disambiguation, object names
that come earlier on the command line must not be interpretable as
pathspecs and pathspecs that come later on the command line must
not be interpretable as object names. Tweak the disambiguation
rule so that ":/" (no other string before or after) is always
interpreted as a pathspec, to avoid having to say "git cmd -- :/".
* nd/magic-pathspec-from-root:
grep: avoid accepting ambiguous revision
Update :/abc ambiguity check
|
|
Add a new command "git check-ignore" for debugging .gitignore
files.
The variable names may want to get cleaned up but that can be done
in-tree.
* as/check-ignore:
clean.c, ls-files.c: respect encapsulation of exclude_list_groups
t0008: avoid brace expansion
add git-check-ignore sub-command
setup.c: document get_pathspec()
add.c: extract new die_if_path_beyond_symlink() for reuse
add.c: extract check_path_for_gitlink() from treat_gitlinks() for reuse
pathspec.c: rename newly public functions for clarity
add.c: move pathspec matchers into new pathspec.c for reuse
add.c: remove unused argument from validate_pathspec()
dir.c: improve docs for match_pathspec() and match_pathspec_depth()
dir.c: provide clear_directory() for reclaiming dir_struct memory
dir.c: keep track of where patterns came from
dir.c: use a single struct exclude_list per source of excludes
Conflicts:
builtin/ls-files.c
dir.c
|
|
:/abc may mean two things:
- as a revision, it means the revision that has "abc" in commit
message.
- as a pathpec, it means "abc" from root.
Currently we see ":/abc" as a rev (most of the time), but never see it
as a pathspec even if "abc" exists and "git log :/abc" will gladly
take ":/abc" as rev even it's ambiguous. This patch makes it:
- ambiguous when "abc" exists on worktree
- a rev if abc does not exist on worktree
- a path if abc is not found in any commits (although better use
"--" to avoid ambiguation because searching through commit DAG is
expensive)
A plus from this patch is, because ":/" never matches anything as a
rev, it is never considered a valid rev and because root directory
always exists, ":/" is always unambiguously seen as a pathspec.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Since we have just created a new pathspec-handling library, now is a
good time to add some comments explaining get_pathspec().
Signed-off-by: Adam Spiers <git@adamspiers.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
longest_ancestor_length() relies on a textual comparison of directory
parts to find the part of path that overlaps with one of the paths in
prefix_list. But this doesn't work if any of the prefixes involves a
symbolic link, because the directories will look different even though
they might logically refer to the same directory. So canonicalize the
paths listed in GIT_CEILING_DIRECTORIES using real_path_if_valid()
before passing them to longest_ancestor_length(). (Also rename
normalize_ceiling_entry() to canonicalize_ceiling_entry() to reflect
the change.)
path is already in canonical form, so doesn't need to be canonicalized
again.
This fixes some problems with using GIT_CEILING_DIRECTORIES that
contains paths involving symlinks, including t4035 if run with --root
set to a path involving symlinks.
Please note that test t0060 is *not* changed analogously, because that
would make the test suite results dependent on the contents of the
local root directory. However, real_path() is already tested
independently, and the "ancestor" tests cover the non-normalization
aspects of longest_ancestor_length(), so coverage remains sufficient.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Jeff King <peff@peff.net>
|
|
Move the responsibility for normalizing prefixes from
longest_ancestor_length() to its callers. Use slightly different
normalizations at the two callers:
In setup_git_directory_gently_1(), use the old normalization, which
ignores paths that are not usable. In the next commit we will change
this caller to also resolve symlinks in the paths from
GIT_CEILING_DIRECTORIES as part of the normalization.
In "test-path-utils longest_ancestor_length", use the old
normalization, but die() if any paths are unusable. Also change t0060
to only pass normalized paths to the test program (no empty entries or
non-absolute paths, strip trailing slashes from the paths, and remove
tests that thereby become redundant).
The point of this change is to reduce the scope of the ancestor_length
tests in t0060 from testing normalization+longest_prefix to testing
only mostly longest_prefix. This is necessary because when
setup_git_directory_gently_1() starts resolving symlinks as part of
its normalization, it will not be reasonable to do the same in the
test suite, because that would make the test results depend on the
contents of the root directory of the filesystem on which the test is
run. HOWEVER: under Windows, bash mangles arguments that look like
absolute POSIX paths into DOS paths. So we have to retain the level
of normalization done by normalize_path_copy() to convert the
bash-mangled DOS paths (which contain backslashes) into paths that use
forward slashes.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Jeff King <peff@peff.net>
|
Junio C Hamano
Jeff King
Erik Elfström
Duy Nguyen
René Scharfe
Tanay Abhra
Martin Erik Werner
Christian Couder
Felipe Contreras
Jiang Xin
Thomas Rast
Andrew Wong
Michael Haggerty
Adam Spiers